NetStrand HDMI 2.0 Cable - High Speed with Ethernet (3-50ft)
High Speed HDMI Cable
If you're looking for HDMI 2.0 cables that meet the latest standards in technology, look no further than NetStrand's HDMI with Ethernet. Designed to deliver the ultimate high definition experience to your HDTV, this Category 2 cable provides a crisp, clean picture, supporting resolutions up to Ultra HD 4Kx2K at 60Hz and full 1080p. Easily connect cable boxes, satellite receivers, Blu-ray players, streaming devices, computers and game consoles to your flat screen TV.
Up to Speed
With a bandwidth of 18 Gbps and a 600 MHz refresh rate, you'll receive a true movie theater experience. It features a built-in ARC, which allows you to transmit audio through your ARC-compatible receiver without an extra audio cable. Streamline your setup and lose the cable clutter. Need an HDMI cable for Xbox One? It's compatible with most newer gaming consoles like Xbox One, PlayStation 4 and many more. Gaming will be all immersive with no lag and sharp graphics. Easy win!
Of course, if you just need the basics, this cable is fully compatible with all previous HDMI versions. It's truly a universal solution for every device.
NOTE: 30ft and longer are directional cables. Please make sure the correct ends are plugged into your devices
Backed by Our Lifetime Guarantee
With the FireFold Signature Lifetime Warranty, you never have to worry that you're not getting the best possible quality available. If you have any problems with your cable related to manufacturer defects, simply contact us with your order number to secure a replacement. Our Customer Service Representatives will be happy to walk you through the process.
From $5.49 - $58.99
NetStrand Long Run HDMI Cable with Built-in Equalizer (75-100ft)
Your HDTV Just Got a Whole Lot Better
Gone are the days where you had to worry about a wide array of different types of cables every time you brought home a new piece of home cinema equipment. Between red, yellow, white, green and other multi-colored cable options, just figuring out which one offered the best picture quality was an uphill battle on the best of days - to say nothing of how complicated things became when options like S-Video entered the conversation.
Flash forward to today and HDMI is pretty much your one-stop shop for all of your high definition video AND audio needs. Whether you're connecting a Blu-ray player, a UHD 4K disc player, a gaming console, a cable box or something else entirely, you only need to deal with a single cable per device to unlock every last ounce of performance from your equipment that you've already paid a premium for.
But when you're talking about a three foot cable, that's one thing. True home cinema aficionados know that sometimes your equipment may be located dozens of feet away from the screen itself - or even in a totally different room depending on the situation. While it's true that HDMI is a digital cable, you DO still have to worry about issues like signal degradation or interference over long distances. But now, thanks to NetStrand, these are ALSO problems that you don't have to concern yourself with any longer.
NetStrand offers not one but two high quality long run HDMI cables for you to choose from in different lengths depending on your situation. You can choose from both a 75ft HDMI cable and a 100ft HDMI cable - offering the freedom and flexibility you need to set up your equipment how you want, any way you want, no exceptions.
The NetStrand Long Run HDMI Cable with Built-in Equalizer has been designed from the top down to deliver only the ultimate in high definition content from your HDTV, compatible right out of the packaging with all of the devices you already have in your home. Note that this is even a Category 2 High Speed HDMI cable, which means that it supports a maximum bandwidth of a stunning 10.2 Gbps with an absolutely unforgettable 340 MHz refresh rate. What this means is that you can always enjoy a crisp, crystal clear picture with absolutely NO lag - regardless of how you've chosen to build the perfect home theater.
As the name suggests, these cables also have a built-in signal equalizer to prevent impedance mismatch and to amplify the full signal over the length of the cable with ZERO signal loss at any point. Not only that, but the cable is also backwards compatible with ALL previous versions of the HDMI standard and also natively supports all of today's latest state-of-the-art features like 4K resolutions, 3D content, multi-channel audio and much, much more.
Finally, you have the flexibility you need to set up your home cinema in any way that you'd like and STILL enjoy the stunning HD content you love so much.
Note: This cable is directional. The longer connector labeled "output" goes to your TV or display. Please test your setup before running in walls or ceiling. HDMI cables with equalizers may have complications with Blu-ray players. HDMI Cables with equalizers are known to be incompatible with some splitters and switches. We suggest using this cable for device to device connections rather than connections using a splitter or switch. This cable's ability to function is dependent largely on the power supplied by the source device. You may experience issues with computers, game consoles, Roku and Apple TV and may not be able to transmit the signal over this distance.
On Sale from $43.49
4K HDMI 2.0 Splitter with 3D, UHD-HDR Support, 60Hz - 1x2, 1x4, 1x8
Tired of upgrading all your equipment every time a new shiny object comes out? Future-proof your setup when you go with the most current HDMI specifications and take a breather. This HDMI 2.0 splitter supports Ultra High Definition 4K@60Hz resolutions, UHD-HDR, and 3D. It's HDCP 2.2 compliant and backwards compatible, so it will work just fine with your existing equipment while keeping you primed for future upgrades.
Watch on Multiple Screens
Get extended distribution when you connect this HDMI splitter to a single source and duplicate the signal on multiple separate displays. This splitter is ideal for sports bars, classrooms, medical facilities, and situations where multiple screens are in demand. The power supply is included in the package, so there is no need to supply additional power. The incredibly compact unit can be discreetly concealed and blends seamlessly with any decor.
Choose Your Ports
Whether you need an HDMI 1 to 2 splitter, 1 to 4 splitter, or 1 to 8 splitter, we have them all in 2.0. Select the number of ports you need from the drop down menu based on how many screens you want to split the signal to.
This HDMI splitter for TV comes with the FireFold 60 Day Guarantee, which means you can return it in its original condition for any reason for up to 60 days after purchase. It also has a one year warranty, so if it fails due to manufacturer defects during the first year after purchase, we will replace it to keep you going.
- 1x2 Splitter: DC5V/1A, <5W Consumption
- 1x4 Splitter: DC5V/2A, <8W Consumption
- 1x8 Splitter: DC12V/2A, <15W Consumption
- 1x2 Splitter: 3.78(L) x 2.32(W) x 0.66(H)" (96x59x16.8mm)
- 1x4 Splitter: 6.22(L) x 3.14(W) x 0.67(H)" (158x80x17mm)
- 1x8 Splitter: 10.24(L) x 3.54(W) x 0.83(H)" (260x90x21mm)
- 1x2 Splitter: 3.46oz (98g)
- 1x4 Splitter: 6.91oz (196g)
- 1x8 Splitter: 15.98oz (453g)
From $45.99 - $94.99
Cat6 Patch Panel - 110 Type
Our Cat6 Patch Panel is designed to provide amazing performance and cable management. Each Cat6 Patch Panel comes with 110-type termination while meeting and exceeding TIA/EIA-568B.2/568B.2-1 Cat.6 ISO/IEC 11801 hardware specifications.
These patch panels accommodate top, bottom or side cable entry. This leaves plenty of options on being able to get to your cables once you have everything set up. These IT patch panels are also able to handle wire diameters of 22AWG to 26AWG, so you should be able to easily find a wire to fit.
Each patch bay is a high-density 19-inch panel.
From $25.99 - $119.59
Vanco Certified Premium High Speed HDMI Cable with Ethernet - HDMI 2.0, 4K
Regardless of whether you're a serious gamer or casual movie-watcher, Vanco's Premium HDMI cable will ensure that you can enjoy a crisp image on your favorite HD monitor. This HDMI cable is suitable for all of the modern high-definition screens and monitors. From 720p to 4K, you'll be able to see stunning images from across the color spectrum.
Responsive High Speed Images
Since Vanco's High Speed HDMI cable has been tested and certified to function with a bandwidth of 18Gbps, this product is suitable for home theaters and expanded gaming rigs. Even if your video source is a server in the Cloud, this Premium HDMI cable will deliver smooth images that will provide you and your friends with consistently great entertainment. To accommodate hardcore home theaters, this product also supports the 21:9 video aspect ratio. This ratio is the gold standard for large screens, and it allows for viewers to clearly see the image from anywhere in the room. This high-speed HDMI cable is optimized for the most demanding HD standards of today, but it is also future-proofed for upcoming innovations in visual technologies.
While many HDMI products focus solely on delivering excellent visuals, Vanco's Premium HDMI cable is a workhorse for bringing a beautiful audio experience to your ears. This product supports up to 32 audio channels with ARC. To avoid interference to the audio and visual signals that are delivered through this product, this product has been EMI-tested. These tests concluded that this HDMI cable is resistant to interfering signals from other areas of the electromagnetic spectrum.
The Vanco Premium High Speed HDMI Cable with Ethernet is a product that will allow both casual and serious owners of home theaters to enjoy stunning HD visuals and audio. The product's impressive specifications ensure that it is a long-term investment that will serve your entertainment needs for many years to come.
From $12.99 - $69.99
RedMere HDMI Cable - High Speed with Ethernet 4K Ready
In with the New
Redmere, Redmere, Redmere! It’s the revolutionary technology that has succeeded in finally improving HDMI by adding another dash of elegance and efficiency. But what’s all the hype about and is it really worth it? What kind of sorcery is this? In the simplest terms, an HDMI with Redmere cable like the HDMI-RDMR contains a tiny chip in the head that acts as a booster and an equalizer. This method of signal enhancing doesn’t require an external power source. The chip is small enough to work using the 5v natively carried through HDMI. This heightened strength means the cable can carry signal farther using less copper, making the cables much thinner than ordinary HDMI.
The HDMI-RDMR drastically outperforms in flexibility and portability. They can easily bend up to 180 degrees at less than a ¾ inch radius, making them perfect for use behind a flat TV mount. Even the heads themselves are significantly shorter, reducing the need for TV mount spacers and right angle adapters. You don’t have to sacrifice cable length for this feature, either. In fact, HDMI with Redmere cables can carry signal longer distances than those without the chip. They have been tested in lengths up to 130 feet without any loss in video or audio quality.
You don’t have to wait for a special occasion to upgrade your system with this cable. They can be used in place of a regular HDMI cable anywhere, anytime. All you have to remember is that HDMI Cables with Redmere are directional. That means they will only send the signal in one particular direction, so you must be sure you connect them correctly for them to work. The ends are clearly marked. Just attach the cable with the Redmere logo to the display. Plugging them in the wrong direction will not cause any harm, you just won’t get a signal.
Can RedMere HDMI cables be coupled with regular HDMI cables?
Yes, the two will work together with the use of a coupler or adapter, as long as you heed the directional nature of the RedMere cable and make sure the correct end is plugged into your device.
From $21.99 - $99.99
Rhino Brackets Articulating Curved and Flat Panel TV Wall Mount for 37-70 Inch Screens
This articulating TV wall mount bracket from Rhino Brackets is designed to fit both curved and flat panel screens. The universal hole pattern is designed for most HDTVs measuring 37 to 70 inches and weighing up to 110 pounds.
This TV bracket swivels up to 90 degrees and tilts up to 20 degrees downward ensuring the best viewing angles. Hardened steel construction with a durable powder coat finish create a lasting solution to mounting your TV.
NetStrand MFi Certified Lightning to USB Cable Multipack
Charge your Apple devices with NetStrand's Lightning Cable, Mfi Certified and licensed from Apple. This cable is designed to work with newer Apple devices like the iPhone 5/6/7 and newer iPads with retina display. With FireFold's lifetime guarantee, rest assured your devices will charge reliably and quickly.
Apple, iPod, iPhone, and iPad are trademarks of Apple Inc., registered in the U.S. and other countries. Lightning is a trademark of Apple Inc.
From $17.99 - $59.99
HDMI over Cat6 Extender with IR - 196ft
Easily and conveniently extend your HD signal up to 196ft using this HDMI extender over Cat6 network cable. This extender uses a single Category 6 cable to transmit your digital signal, allowing you to surpass the standard 50ft limitations of ordinary HDMI cables. It supports resolutions up to 1080p and is 3D ready for capable devices. The sleek aluminum alloy shell is both durable and attractive.
4K HDMI 2.0 Switch with 3D, UHD-HDR Support, 60Hz - 3x1, 5x1
This HDMI 2.0 Switch supports the most current HDMI specifications and allows you to easily switch between multiple source devices on a single TV or display. If you're tired of upgrading your entire setup every time a new shiny object comes out, this is the best 4K HDMI 2.0 switch to future proof your media center and let you breathe easy for a while.
It supports Ultra HD 4Kx2K@60Hz video signals, as well as 3D in an easy plug and play interface. Switching is controlled with the convenient remote included with the unit or manually via the button located on the front panel. The power supply is also included in the package, so there is no need to supply additional power. The compact unit weights under a pound and blends discreetly into any decor.
Connect Multiple Sources to a Single TV
When you've got more source devices than HDMI ports, you need an HDMI switch to connect them all to your TV at once. Connect your Blu-ray player, gaming console, cable box, satellite receiver, streaming devices, and more to this HDMI 2.0 switch and you're in business! No more unplugging and plugging in cables every time you want to watch a different source. Simply choose your device from the remote, sit back, and enjoy.
Choose Your Ports
Whether you need an HDMI 3 switch or 5 switch, we have them both in 2.0. Select the number of ports you need from the drop down menu based on how many devices you want to connect to your TV.
This HDMI switcher for TV comes with the FireFold 60 Day Guarantee, which means you can return it in its original condition for any reason for up to 60 days after purchase. It also has a one year warranty, so if it fails due to manufacturer defects during the first year after purchase, we will replace it to keep you going.
From $42.99 - $52.99
Full Motion TV Wall Mount Bracket for 37-70 Inch Screens, Dual Arm
Convenience and versatility make this full motion TV wall mount the perfect solution for mounting any flat panel TV measuring 37 to 70 inches and weighing up to 132 pounds. The solid toughened steel construction is built to last and blends discreetly into any decor. Full motion one hundred twenty degree swivel and ten degree downward tilt offer viewing angle flexibility to meet any room configuration. Universal design and VESA pattern ensure compatibility with most brands and models of HDTVs.
SCP 4K ULTRA HD HDMI 2.0 Cable - Custom Install (3-50ft)In 2016, SCP upgraded their industry popular Custom Install Series - 944E HDMI cables. These SCP HDMI cables have been tested to the latest HDMI cable performance protocols and are now guaranteed to comply with the TRUE 4K Ultra HD standard of 4K@60 4:4:4 (2160p), Full 18Gbps for all SCP 944E series HDMI cables. These cables are HIGH SPEED WITH ETHERNET compliant.
All 944E cables are UL CL-2 rated for In-Wall installation and are backward compatible with all previous HDMI versions.
On Sale from $7.99
Tilt Ceiling TV Mount with Adjustable Pole - 32 to 55 Inch Screens
The ultimate universal solution, this tilt ceiling TV mount is designed for installations in retail establishments, classrooms and healthcare facilities. The TV pole length adjusts from 28 inches to 45 inches and is the ideal length for most applications. The back plate features a universal VESA hole pitch, designed to fit most 32 to 55 inch TVs with VESA standards up to 600 x 400mm.
For additional flexibility, the ceiling plate can be tilted up to 90 degrees, making it the perfect solution for mounting on troublesome cathedral ceilings. The added pitch is no longer an issue. The back plate tilts up to five degrees upward or 15 degrees downward, allowing you to achieve the best viewing angle.
This complete TV ceiling mounting kit includes all hardware required for standard mounting to wood studs, as well as screws and anchors for mounting on concrete and brick. For added security, it is lockable (lock not included). Solid toughened steel construction with a scratch resistant finish means this mount is built to last.
Vanco RedMere HDMI Cable - High Speed with Ethernet 4K Ready CL3
The Vanco RDM HDMI Cable features Redmere technology, enabling a lighter and thinner option from standard HDMI cables. It's a quarter of the size of most HDMI cables, bendable and easier to route, so perfect for any installation.
Redmere enables active amplification, providing High-Speed data transfer and the highest resolutions up to 100 feet. This HDMI cable also supports 3D devices and devices with IP-Based Applications through the built-in Ethernet Channel. An Audio Return Channel eliminates the need for an extra audio cable with compatible devices.
Can RedMere HDMI cables be coupled with regular HDMI cables?
Yes, the two will work together with the use of a coupler or adapter, as long as you heed the directional nature of the RedMere cable and make sure the correct end is plugged into your device.
From $60.39 - $225.09
Vanco Active High Speed HDMI 2.0 Cable with Ethernet - 4K (12-50ft)
Future-proofed and ready for today's demanding setups, these Vanco Active High Speed HDMI Cables with Ethernet ensure a crisp, clear HD signal every time. They feature a built-in active chipset with auto equalization, which ensures your HDMI signal can go the distance. They support resolutions up to Ultra HD 4K@60Hz and 4:4:4 chroma sampling.
The SecureFit connectors are pull tested up to seven pounds, providing 45 percent stronger connections than standard HDMI connectors. The built-in tabs lock into place for a solid bond.
From $39.99 - $114.99
Vertical Cable 047-WFJ Open Wall Mount
The Vertical Cable 047-WFJ steel frame open wall mount rack comes knocked down, ready for easy assembly. M6 screws and cage nuts included.
Please note: Standard 3/8" cage nuts are not compatible with this product.
From $64.99 - $106.99
NextGen Invisible Multi-Room Remote Extender
Make any normal remote work anywhere in your house. Works through doors, walls, and floors! Simple Setup and ease of use.
There are two separate frequencies for these remote extenders: 418 and 433MHz. This is for cases where you might want to install one upstairs and one downstairs, or your neighbor also has one and you want to make sure the signals are not interfering with each other.
From $48.99 - $52.99
Klein Tools IR5 Dual-Laser Infrared Thermometer
The Klein Tools IR5 Dual-laser Infrared Thermometer is designed for rugged field work. With a 6.6-foot drop protection range, you know you're carrying a reliable tool and not a delicate jewel.
The generous measurement range is -22° to 752°F (-30° to 400°C) and distance-to-spot optical resolution ratio is 12:1.
This thermometer features dual laser targeting, auto-scan, max/min/avg/diff and high/low alarm. The backlit display ensures visibility and auto power-off means no drained battery. Battery life expectancy is ten hours of continuous use with the laser and backlight on.
The IR5 includes a protective custom pouch and battery.
Platinum Tools Cat5E EZ-RJ45 Connector
As anyone who has ever planned their network knows, terminating Ethernet cables isn’t necessarily hard. It can be a tedious process, though, and it is necessary to speed and functionality to get it correct. If you have a lot of cables to connect or if you’re a network professional, the amount of time spent on getting conductors just right can be frustrating and even wasteful. You have to measure carefully to ensure you are clipping the precise length of wire to fit snugly into your connector and often you have to assume your pins have stayed in the right order before you crimp them.
Platinum Tools, a leading designer and manufacturer of network wiring instruments, has created a patented EZ system to eliminate many of the headaches associated with those tiny connectors. Product number 100003C is a pack of Cat5E EZ-RJ45 connectors for Cat5E installations. These connectors can be used with most ordinary crimpers, but the full benefits can only be experienced when used with an EZ-RJ45 crimp tool.
The initial steps for adding an EZRJ45 connector onto a Cat5E Ethernet cable is the same. You score the outer jacket and remove an inch and a half, snipping the pull thread to get it out of your way once you have enough of the conductors exposed. Untwist the pairs and line them up according to your chosen wiring diagram. Then, instead of measuring where you need to snip off the excess wire, you skip straight to inserting the cable into the connector. Thanks to the all-transparent pull-through design, you can quickly check to make sure the correct wire pinout has been maintained by checking the wires that have come out the end of the connector and by looking into the body of the connector itself. Once everything is lined up properly, crimp the connector on. The EZ-RJ45 tool will crimp and cut away the extra wire all in one squeeze.
From $29.99 - $56.99
ICC Cat6 EZ Modular Keystone Jack 25 Pack
The ICC IC107L6C Cat6 EZ Modular Keystone Jack 25 Pack comes with 25 8-position, 8-conductor (8P8C) modular connectors. It provides outstanding performance and reliability and supports up to Gigabit Ethernet applications. These keystone jacks are easy to terminate, simplifying installation and reducing work time.
Vertical Cable Cat6/6A Shielded Plug for Solid or Stranded Cable - 23AWG, 100pk
These Cat6/6A RJ-45 Shielded Plugs are designed for Round Solid or Stranded cable at 23 AWG and feature 50 micro-inch gold plated contacts. This 100 pack of connectors is an excellent choice for extensive Cat6 networking solutions.
ICC ICCMSJHK55 4 Inch J Hook 25 Pack
These four inch J Hooks from ICC are an affordable alternative to expensive cable trays and cable ladders. These hooks are constructed from high quality galvanized steel with a zinc plated finish, offering both durability and resistance to corrosion. They are ideal for structured cabling and hold approximately 160 Cat5E cables or 100 Cat6 cables. Built-in cable anchor points allow you to secure cables with zip ties for additional stability. This convenient multipack comes with both hooks and retainer clips.
Platinum Tools Cat6 RJ45 EZ-RJ45 Connector - 100 Pack
As anyone who has ever planned their network knows, terminating Ethernet cables isn’t necessarily hard. It can be a tedious process, though, and it is critical to speed and functionality to get it correct. If you have a lot of cables to connect or if you’re a network professional, the amount of time spent on getting conductors just right can be frustrating and even wasteful. You have to measure carefully to ensure you are clipping the precise length of wire to fit snugly into your connector and often you have to assume your pins have stayed in the right order before you crimp them.
Platinum Tools, a leading designer and manufacturer of network wiring instruments, has created a patented EZ system to eliminate many of the headaches associated with those tiny connectors. Product number 100010B is a 100-pack of Cat6 EZ-RJ45 connectors. These connectors can be used with most ordinary crimpers, but the full benefits can only be experienced when used with an EZ-RJ45 crimp tool.
The initial steps for adding an EZRJ45 connector onto a Cat6 Ethernet cable is the same. You score the outer jacket and remove an inch and a half, snipping the pull thread to get it out of your way once you have enough of the conductors exposed. Untwist the pairs and line them up according to your chosen wiring diagram. Then, instead of measuring where you need to snip off the excess wire, you skip straight to inserting the cable into the connector. Thanks to the all-transparent pull-through design, you can quickly check to make sure the correct wire pin-out has been maintained by checking the wires that have come out the end of the connector and by looking into the body of the connector itself. Once everything is lined up properly, crimp the connector on. The EZ-RJ45 tool will crimp and cut away the extra wire all in one squeeze.
Vertical Cable 1000ft Bulk Solid CAT3 Cable - 24AWG CMR 2 Pair
Whether you're using it for voice, data, or security this Cat3 1000ft bulk cable provides the quality and convenience you need. It features color striped pairs for easy identification, solid bare copper conductors for maximum conductivity, a ripcord for easy stripping and sequential foot markers on the jacket to make measuring a breeze. It is constructed of 24AWG 100% solid bare copper conductors with polyethylene (PE) insulation and a PVC jacket. This Cat3 cable also is assured by our FireFold Signature Lifetime Warranty and a money back guarantee.
On Sale $52.99
Articulating Ceiling TV Mount with 42 to 61 Inch Incremental Adjustable Pole - 37 to 70 Inch
This articulating Ceiling TV Mount is the ideal solution for mounting displays in retail establishments, healthcare facilities, and classrooms. The pole adjusts in increments, allowing precision placement. It features a 25 degree tilt and 180 degree swivel for achieving the best viewing angle at any location. Solid toughened steel construction with a black, scratch resistant finish make this mount a durable component of any TV installation.
Platinum Tools 100027C ezEX™48 Shielded, External Ground, CAT6A Connector 25 Pack
This shielded ezEX-RJ45 connector is designed for larger cables and conductors. Features a unique integrated Hi-Lo stagger load bar and allows ‘big’ conductors to pass through the front end of the connector making it easy to verify the wiring sequence before terminating. This connector is typically used with Cat6A and is terminated with EXO Crimp Frame® and EXO-EX Die™ (100061C).
1U Rack Mount Power Distribution Unit PDU with 10+2 AC Outlets
Add extra power sources to any standard 19 inch rack or cabinet with this 1U rack mount power distribution unit. This power strip installs easily to provide 2 front panel AC outlets and 10 back panel AC outlets. A lighted on/off switch and 3 status indicator lights.
Quest HPS-E10A 19 Inch 10 Outlet Horizontal Power Strip
Power strips are needed in any setup, it's just a fact of life. This particular necessity will work great for a networking setup, telecommunications installation, or as part of a terminal. It can be configured to a 19" rack and takes up only 1U (unit). There are 10 outlets with 2 in the front and 8 in the back for accessibility and a 15 Amp circuit breaker as a precaution to overload or short circuiting.
19" racks are essentially the standard size that most racks come in, and since this rack is 19" itself, there is no surprise that it is configurable to a rack. It takes up only 1U on a rack so your monster server or patch panel can take up 5. Take your rack with you by having a power strip available when you need it.
Certain cords aren't going to be removed very often; we're talking about power cords to the servers, monitors, patch panels, etc. Not only don't you want to remove them, but you likely don't want to see them, and so that is why there are outlets in the back; there are also outlets in the front. These front outlets allow you to quickly plug in a device (such as a diagnostic tool) to be used immediately where it is needed and then put it away. While simply having a power strip on a rack will allow you to do this, if all of the outlets were on the back it would be inconsiderate on the part of the designers to make you go back there and sift through cables and such.
These devices are made to take on some excess voltage that may overload, short circuit, or otherwise damage the system via an overcurrent. The nice part of a circuit breaker is that once it has done its job you can simply reset the switch and it will serve you again.
Vertical Cable 107-1954BK6Q500 500ft RG6 Quad Shield Coaxial Cable, Black
This high grade quad shield RG6 coax cable is designed for use in digital HDTV applications, CATV, outdoor TV antennas and digital satellite installations. It features four shields - two aluminum foil and two braided aluminum wire shields - for maximum EMI and RFI resistance. It has a gas-injected foam polyethylene insulation with a black PVC jacket.
This quad shield coaxial cable is CL2 rated for in-wall installations. It comes in a convenient 500ft pull box for smooth, snag-free dispensing.
Platinum Tools 202044J Cat6 ezEX™44 ezEX-RJ45® Connector 100 Pack
The Platinum Tools 202044J Cat6 ezEX™44 ezEX-RJ45® Connector is manufactured to provide easy termination when crimped onto Cat6 structured cabling. The unique design makes it easy to verify wiring sequences before terminating and allows larger conductors to pass through the front end. The integrated Hi-Lo stagger load bar isolates each conductor for higher performance.
ezEX™44 - ezEX-RJ45® connectors are made in the USA with high quality, American-made workmanship. This 100 pack comes in a resealable plastic jar for easy storage and portability.
These connectors are designed for use with the EXO™ Crimp Frame and EXO-EX Die (100061C).
- (100) Platinum Tools ezEX™44 - ezEX-RJ45® Connectors in Plastic Jar
Vertical Cable 107-1955WH6Q500 500ft RG6 Quad Shield Coaxial Cable, White
This high grade quad shield RG6 coax cable is designed for use in digital HDTV applications, CATV, outdoor TV antennas and digital satellite installations. It features four shields - two aluminum foil and two braided aluminum wire shields - for maximum EMI and RFI resistance. It has a gas-injected foam polyethylene insulation with a white PVC jacket.
This quad shield coaxial cable is CL2 rated for in-wall installations. It comes in a convenient 500ft pull box for smooth, snag-free dispensing.
Composite 3 RCA + S-Video to HDMI Converter and Scaler
With this device, you could have your conversions in a fraction of the time. This +S Video RCA to HDMI Converter and Scaler is an exquisite choice indeed. You can stream video and audio directly from your older device onto an HDMI display. Whether you wish to continue using your DVD player, VCR, cable box, or anything else, you can avoid an inconvenient upgrade with this versatile tool. The ease in which this converter may be set up is second only to that of a magic wand. Simply connect all of your cables and enjoy the visible rewards of your transmutations.
The +S Video RCA to HDMI Converter and Scaler upscales to a full 1080p high-definition picture. You can even connect both composite and s-video at the same time by using a switch to select which you’d like to see. You must be sure to plug into an electrical outlet so it might have the power to do your bidding. In addition to this converter, you may also need to seek HDMI, composite, or s-video cables. Once again, you are lucky to live in such advantageous times! I imagine your quest for these items will take but a click.
4x2 HDMI Matrix Switch
Gadgets and Gizmos Aplenty?
You want what you want, and you won’t be held back. While cables boxes, Blu-ray players, gaming consoles, and computers pile up around you, the sad fact is that your television isn’t going to magically grow new HDMI ports. Eventually, you’re going to run out of space. Sometimes plugging and unplugging cables from the TV is convenient enough, but it’s not the most efficient and undue handling can damage the HDMI board. If you don’t have surround sound, you don’t want to spend the money on a receiver, and what it you want to send your signal to multiple displays? With FireFold’s HDMI-4X2-MATRIX, you can connect up to four devices to two different televisions.
This 4x2 HDMI Matrix Switch is a switch and a splitter all in one. It is perfect for offices, churches, and advanced home theaters. This all-HDMI switch has four inputs for your devices and two outputs to your displays. There are even two additional audio outs- one optical and one analog RCA- for connecting to a separate surround sound or pair of speakers. There’s no need to sacrifice quality for flexibility, either. This device can handle all the bells and whistles of HDMI including 3D, deep color 1080p, and both compressed and uncompressed audio formats.
The set-up is as easy as connecting the dots. Selecting which device to view and where to view it can be done manually through the use of a button or by the provided IR remote. The remote requires line of sight, but there is an input for an IR extension in case your switch is hidden behind walls or doors. This switch requires the use of the included power supply and you may need additional HDMI cables. Occasionally, repeaters and equalizers have been known to cause interference with HDMI switches and splitters so regular or RedMere HDMI cables is suggested.
Vertical Cable 500ft 18 Gauge In-Wall Speaker Wire - CL3 18/2, White
Cut and Run
Whether you are a seasoned professional or just trying to think like one, choosing home theater speaker wire often comes down to the classic combination of quality and quantity. Shopping at FireFold means you can find everything you are looking for all at once without a lofty price tag. There are several questions you should be able to answer while shopping for speaker wire. The gauge you need, how much you need, and where you are planning to run the cable all affect which product would best suit your installation. For larger tasks, bulk speaker wire offers the best value. We carry in-wall and outdoor bulk speaker wire in a variety of lengths and gauges.
What’s in the Box?
This 500’ box of 18 gauge wire is perfect for many projects including surround sound and intercom systems. CL3 in-wall rated, it is designed to meet the National Electrical Codes (NEC) standards for fire safety. A white PVC jacket and stranded copper design means this cable can handle the bends and twists of any indoor installation. It also means this wire is sturdy and protected enough to stand up to countless years of use. How many years? How does a lifetime sound? Every foot of speaker wire in this box comes with FireFold’s Signature Lifetime Warranty.
This 18 AWG two-conductor wire is ideal for runs to single speakers or receivers. The polarized wires are color coded in red and black plastic sheaths to make identifying the positives and negatives easy no matter how long the distance. 99.99% oxygen-free copper conductors carry crystal clear sound while reducing the risk of degradation and corrosion over time. The cable jacket and box were both designed with professional usage in mind. Sequential length markings along the cable jacket take the guesswork out of measurements and the pull-through box saves you time by preventing kinks.
On Sale $63.49
ICC 9 Inch Plastic Net Media Center Combo - Voice/Data/Video
The ICC ICRESDC9PK 9 Inch Plastic Net Media Center Combo supports voice, data and connectivity all in one structured cabling solution. It is designed for small homes, multi-unit buildings and existing home retrofits. It accommodates up to four modules, cable routing knockouts, and a padlock option for added security. Designed for either surface or in-wall mounting, this durable enclosure is affordable and compatible with a wide variety of ICC brand modules.
On Sale $55.39
Vertical Cable 1000ft Bulk RG-6 Coax Cable - Standard Shield 60% Braid CL2
RG6U Standard Shield Coax Cable is one of the best ways to connect point A to point B. Coaxial cables have been the primary medium for transmitting radio frequency signals for many years.
Today, RG6 coaxial cables are popularly used to carry information over long distances into homes and businesses. Suitable for HDTV applications, Cable and Satellite installations and featuring an aluminum shield for maximum protection against interference. Housed in a sturdy pull box for optimum interface, storage, and transportation. 1000 Foot, Black
On Sale $56.99
Vanco HTWP72BW 7.2 Home Theater Wall Plate w/ Bulk Cable
Down to the Wire
The reason wireless speakers have swooped onto the scene is obvious. Unfortunately, wireless systems can be impractical for many reasons or just plain expensive. Wrestling with speaker wire can be the most imposing part of setting up a home theater surround system. You don’t have to be tackling an extensive 7.1 set-up to be faced with the question of where the cables should go and how they should be connected. Let us ease your mind. It isn’t as complicated as it seems and you certainly don’t have to be stuck with the world’s largest cord mound right in the middle of your living room.
Connect the Dots
Vanco’s HTWP72BW 7.2 Home Theater Connection Wall Plate is an all-in-one solution for banishing the mess of wires by running them through the wall. This wall plate is compatible with four-gang junction boxes and low voltage brackets and it includes a convenient bulk pass-through spout for your other home theater cables. Although labeled for an easy home theater set-up, this wall plate can be used for whole house audio as well. With seven pairs of red and black binding post connections and two RCA subwoofer jacks, this wall plate is thorough and flexible.
Binding posts are one style of connecting speaker wire to a device, source, or jack. They are mainly used with banana plugs but most, like these, can also be connected to bare wire. They can easily fit speaker wire up to 12 AWG and they do not require any type of soldering for a secure connection. The black and red posts are marked on both the back and the front, which makes matching positive and negatives confusion-free. Please note the subwoofer connections on the back side of this plate are screw-on F-style coax, not RCA. All jacks are gold-plated for the seamless signal passage and optimal sound.
Crimson-AV F55A Universal Flat Wall Mount with Leveling for 32 to 75 Inch Flat Panel Screens
Low Profile, Universal Design
Adjustable flat wall mount with Universal hole pattern from Crimson AV is designed to fit a wide variety of flat panel screens. The F55A makes a secure installation quick and easy. Post-installation leveling allows for perfect screen positioning even when the ceiling is uneven. "Click in Place" screen placement requires no tools to secure the screen on the wall. Open wall plate design and kickstand feature provides easy access to wiring.
Counterbalance Interactive Full Motion Wall Mount - 26 to 47 Inch Screens
High expectations demand high-performance mounts. The CB2647 is a counterbalance monitor mount, designed for single stud wall mounting. A state-of-the-art spring tension gauge allows this mount to be adjusted with the push of a finger. For seamless sit-to-stand transitions, the gliding arms can horizontally extend up to 23 inches from the wall surface. When fully extended, it can be pushed upward or downward, making it perfect for presentation, a point of sales, and touchscreen systems.
The CB2647 is lightweight and easy to install. It includes all the hardware needed for a standard wood stud mounting as well as built-in cable management covers for hiding your wires. The VESA compatible mounting plate along with a set of extension arms can accommodate the 100x100 to 400x400 patterns typically found on most 26-47”monitors and televisions. This mount can be easily configured to provide smooth motion adjustments for displays weighing up to 44 lbs. Once assembled, the plate features a tilt range of 15 degrees up and down as well as a 3-degree adjustment to compensate for leveling inconsistencies.
On Sale $59.49
Counterbalance Desktop Full Motion 13 to 27 Inch Dual Monitor Mount, Holds up to 20lbs
High expectations demand high-performance mounts. The DMD1324 is a counterbalance dual monitor mount, designed for use with desks, tables, and other flat workspaces. A state-of-the-art spring tension gauge allows this mount to be adjusted with the push of a finger. For seamless sit-to-stand transitions, the gliding arms can vertically extend up to 19 inches from the desktop surface. The mounting plates can even be turned an incredible 360 degrees to view your screen in landscape or portrait mode, which makes it perfect for presentations and touchscreen systems.
The DMD1324 is lightweight and easy to install. With only four pieces to assemble, set-up is quick. This sturdy mount clamps easily to any desktop surface up to 3.5” thick and includes a built-in cable management cover for hiding your wires. Two VESA compatible mounting plates universally accommodate the 75x75 and 100x100 patterns typically found on most 13-27” monitors and televisions. This mount can be easily configured to provide smooth motion adjustments for displays weighing up to 19.8 lbs including up to 90 degrees of tilt and 180 degrees of side-to-side swivel.
On Sale $71.49
Vertical Cable 078-2152/EZC Crimp Tool for RJ45 Feed Through Connectors
The Vertical Cable 078-2152/EZC Crimp Tool is designed for use with RJ45 Feed Through Connectors. The unique design of these connectors makes sequence verification much easier than with standard plugs. This all-in-one tool has an on board cutting and stripping blade to make termination fast and easy. The blue gripping handle offers a firm, secure installation.