HDMI Over CATx Extenders

Quest offers a HDMI Extender that allows you extend HDMI

The HDMI™ Extender lets you extend HDMI™ audio/video signal by up to 60 meters (196 feet) over single CAT6 cable. The extender kit includes both the local transmitter and remote receiver units, perfect for point‐to‐point digital signage applications that require high quality HDMI™ video. It also works to extend Infrared IR signals from remote controls, ideal for controlling your video source from your video destination. For perfect performance, the extender comes with a reset function on the receiver, which enables user to adjust the signal to best match the cable length.

Vanco 280501 HDMI® Extender over Single Cat5e/6 Cable with IR

The Vanco 280501 HDMI Extender over Single Cat5e/6 with IR, extends high definition video and audio signals, and IR, at a distance of up to 196ft/60m over a single Cat5e/6 cable. No EQ adjustments are necessary as the receiving unit automatically adjusts for gain by just a push of a button. Fully supports 1080p high definition resolution, multiple audio formats, and is HDCP compliant. In addition, IR pass-through allows for source control with IR accessories included. With Power over Cable or PoC functionality, only 1 power supply connected to the transmitter is needed to power up both the transmitter and receiver. For extending HDMI over a single Cat5e/6 at a long distance, with IR, the 280501 is a great cost effective solution for any application!

Tech Support Tips:

• Recommended to be used with a permanent source, or non-rotating source. For any rotating source such as a conference room type setup, it is recommended to use an HDBaseT extender
  
• HDMI UHD Deep Color mode on some LG displays may need to be deactivated to avoid video signal issues
  
• Input Signal Plus on some Samsung displays may need to be deactivated to avoid video signal issues

The PureLink AV HCE II Tx 4K HDMI over HDBaseT Transmitter is designed for in-wall cable installations. It allows you to extend HDMI signals past the typical 50 foot maximum using Ethernet cable. Cat6A or Cat7 Cables are recommended for maximum performance.

The HCE II supports embedded lossless audio formats, bi-directional IR signals, and HDCP-protected content. The ultra slim design makes for a compact, discreet installation.

The PureLink AV HCE II Rx 4K HDMI over HDBaseT Receiver is designed for in-wall cable installations. It allows you to extend HDMI signals past the typical 50-foot maximum using Ethernet cable. Cat6A or Cat7 Cables are recommended for maximum performance.

The HCE II supports embedded lossless audio formats, bi-directional IR signals, and HDCP-protected content. The ultra slim design makes for a compact, discreet installation.

Tired of being restricted by HDMI distance limitations in complex setups? Say goodbye to that frustration with the VIP-100 II HDMI over IP distribution system from PureLink AV. This transmitter can be combined with a compatible receiver to transmit over distances up to 364 feet, or 120 meters.

Get audio/video, RS-232 and IR extension coupled with matrix switching capability up to a 64x190 system to meet the needs of even the most complex and demanding setup. Point-to-many and many-to-point are also supported.

The BG-EXH-150C is a cost-effective and reliable solution for long-range HDMI extension. It extends HDMI audio/video signals, RS-232, and bi-directional IR at distances up to 150 meters (490 feet) using a single category cable. It supports resolutions up to 4K2K@60Hz. One HDMI loop port is available for signal passthrough at the transmitter end. It also supports audio de-embedding via the 3.5mm connection on the receiver. Two-way IR pass-through allows for both source and display control. The slim design of the individual components allows them to easily be integrated to existing systems.

HDMI® Extender over Fiber with KVM USB Pass-through

The Evolution by Vanco EVEXFBRK1 HDMI Extender with KVM, bi-directional IR, and RS-232, extends 4K HDR video and audio signals up to 984ft/300M over multi-mode fiber optic cables, and 6.2mi/10km over single mode fiber optic cables and modules! USB 2.0 KVM allows for controlling a security NVR/DVR, computer, NAS system, or any other component that is controlled by USB with this extender. No need to run a separate line or extender just for KVM control! Bi-directional IR pass-through allows for source and/or display control. Also features RS-232 pass-through for additional control. For extending HDMI with 4K HDR resolution at an extreme distance, the EVEXFBRK1 is a great solution for any application.

The EVEXFBRK1 includes two units: transmitting unit (EVEXFBRK1-TX) and receiving unit (EVEXFBRK1-RX). The transmitting unit is used to capture the HDMI input with control signals and carries the signals via fiber optic cables. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR signals. Both units require power.

Evolution HDMI over IP Transmitter/Receiver

The Evolution by Vanco EVOIPLITE HDMI over IP Transmitter/Receiver is a complete audio, video, and control product over ethernet system. As a whole, the system has the ability to send multiple sources to multiple displays along with IR and RS232 pass-through, analog and digital audio breakout in TX mode, video up to 1080P@60Hz, with POE up to 100m when connected to a POE enabled switch off of a single Cat6 cable. This one single unit can be set to transmit or receive signals. When connected to a network with internet, the EVO-IP Cloud allows for additional features such as scheduling events or maintenance, remote monitoring of a system including remote diagnostics and troubleshooting, as well as voice control capabilities with Alexa! With an IP-less installation option as well as any new sources/displays being discovered automatically within the system, the EVO-IP HDMI over IP system is the fast, easy, and cost effective solution for both residential and commercial installations.

HDMI Extender 4K 70m

The Evolution by Vanco EVEX4K70 HDMI Extender over single Cat6 with Digital Audio Breakout, HDMI Loop-out, IR, and PoE, extends 4K@60Hz, 4:4:4 Chroma, and HDR10 up to 230ft/70m. Vanco’s patented bi-directional Power over Ethernet (PoE) Technology transmits power over Cat6, allowing either the Transmitter or Receiver to be powered without the use of a power supply for an easy installation. The transmitter is equipped with an HDMI loop-out for local monitoring or use with other distribution products. The receiver features digital optical output to break multi-channel audio out to amplifiers for a better listening experience. No EDID or EQ adjustments are necessary as the units automatically adjust for compatibility and gain. In addition, bi-directional IR pass-through allows for source and/or display control. For extending full 4K resolution with up to 60Hz, 4:4:4 chroma subsampling, and HDR10, with options for connecting additional displays and breaking out audio, the EVEX4K70 is a great plug and play solution for connecting the latest components!

The EVEX4K70 includes two units: transmitting unit (EVEX4K70-TX) and receiving unit (EVEX4K70-RX). The transmitting unit is used to capture the HDMI input with IR signals and carries the signals over a single Cat6 cable. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR signals.

*NOTE – All specifications and ratings for the EVEX4K70 have been tested and confirmed using Cat6 cabling. Cat6 or better is strongly recommended for optimum performance, achieve rated distance, and to maximize resolution capabilities of this product. Cat5e is not recommended and may not achieve distance and/or resolution expectations.

BZBGEAR BG-VOP-MT is revolutionary 4K UHD HDMI over IP Multicast Transceiver with Video Wall & PoE support. Sold individually, each unit can be changed from a transmitter to a receiver at the flip of a switch. This scalable system allows you to build out custom HDMI matrix switching over IP. This product features a transmission distance up to 100m(328ft) in UHD 4K2K format. Users can readily extend UHD sources from any HDMI source to any location with a LAN connection. It features audio embedding and de-embedding for connection external audio devices. The integrated USB 2.0 hub provides KVM extension abilities. BG-VOP-MT is HDCP compliant and supports PoE, IR, and RS-232.
With broadcasting management software and Gigabit Ethernet network switch (supporting IGMP), BG-VOP-MT is a complete UHD video broadcasting solution for digital signage. It can transmit UHD HDMI video broadcasting over IP network. The broadcasting format can be Point to Point, Point to Many, and Multi-Casting. In plain English this means you can broadcast a single HDMI source to as many displays as you want simultaneously and even create custom video wall layouts.
The BG-VOP-MT is an ideal solution for video distribution, video walls, and digital signage. With only one part number to remember for transmitting, receiving, and processing, ordering and installation are greatly simplified.

Metra 1 X 4 HDMI® Splitter Extender

Supporting 1080P over category cable, the Metra Home Theater CS-1X4HDSPLEXT is a great way to share ah HDMI based source to 4 displays with category cable wiring.

HDMI cables are great for transmitting audio and video signals short distances, but larger buildings and larger rooms often need electronics inline to ensure signal performance. Simply pulling a long HDMI cable or connecting multiple HDMI cables together can cause signal drop out, interference, pixelization and a host of other signal and performance problems.

The TL-TP70-HDC replaces a traditional HDMI cable with active electronics designed specifically for sending video signals up to 230 feet. Plus, built-in IR and RS232 control signal embedding allow you to also transmit remote control commands with the HDMI stream.

In actual practice, this means you can use the TL-TP70-HDC to send audio and video signals from your source device (often a switcher, cable box, or DVD player) to your destination device (often a display or projector) and control the source device remotely...all using a single twisted pair cable. In other words, you can install your source device in a remote closet or cabinet and control it with the same remote control used for your display. Now that’s a clean installation!

Techlogix Networx Control Cable Extender

The TechLogix TL-TP100-HDC2 revolutionizes high-bandwidth HDMI signal distribution by leveraging HDBaseT technology to transmit 18G HDMI signals, including HDR and 4K@60 4:4:4, up to 100m (330 ft.) over standard twisted pair cabling.

The system works by lightly compressing signals above 10G for twisted pair transport, and then uncompressing the signal at the destination end.

Flexible options for ARC (Audio Return Channel) allow the receiver to accept HDMI, analog, or digital optical. The transmitter can output the audio on HDMI, analog, or digital optical outputs.

Additional built-in features such as flexible power with Port-Saver™ protection, IR and RS232 signal distribution, and Ethernet pass-through make the TL-TP100-HDC2 extremely powerful and extremely flexible.

Techlogix Networx Twisted Pair Cable Extender

HDMI cables are great for transmitting audio and video signals short distances, but larger buildings and larger rooms often need electronics inline to ensure signal performance. Simply pulling a long HDMI cable or connecting multiple HDMI cables together can cause signal drop out, interference, pixelization and a host of other signal and performance problems.

The TL-TP40-HDC2 replaces a traditional HDMI cable with active electronics designed specifically for sending video signals up to 130 feet. Plus, built-in IR and RS232 control signal embedding allow you to also transmit remote control commands with the HDMI stream.

In actual practice, this means you can use the TL-TP40-HDC2 to send audio and video signals from your source device (often a switcher, cable box, or DVD player) to your destination device (often a display or projector) and control the source device remotely...all using a single twisted pair cable. In other words, you can install your source device in a remote closet or cabinet and control it with the same remote control used for your display. Now that’s a clean installation!

HDBaseT™ 4K@60Hz, 4:4:4 Chroma, HDR Extender

The Vanco HDBT4K50 HDBaseT 4K@60Hz, 4:4:4 Chroma, HDR Extender with Bi-directional IR, and Power over Cable (PoC) extends 4K/60Hz, 4:4:4 with HDR along with audio, at a distance of up to 164ft/50m over a single Cat5e/6 cable. Also able to pass 1080p/60Hz up to 230ft/70m. Power over Cable (PoC) Technology transmits power over Cat5e/6, allowing either the Transmitter or Receiver to be powered without the use of a power supply for an easy installation. No EDID or EQ adjustments are necessary as the units automatically adjust for compatibility and gain. In addition, bi-directional IR pass-through allows for source and/or display control. For extending full 4K resolution with up to 60Hz, 4:4:4 chroma subsampling, and HDR, the HDBT4K50 is a great plug and play solution for connecting the latest components! The HDBT4K50 includes two units: transmitting unit (HDBT4K50-TX) and receiving unit (HDBT4K50-RX). The transmitting unit is used to capture the HDMI input with IR signals and carries the signals via one cost effective Cat5e/6 cable. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR signals. The HDBT4K50 offers the most convenient solution for 4K extension over a single Cat5e/6 with Power over Cable, and is the perfect solution for any application.

The PureLink AV HCE II Tx/Rx 4K HDMI over HDBaseT Extension System is designed for in-wall cable installations. It allows you to extend HDMI signals past the typical 50 foot maximum using Ethernet cable. Cat6A or Cat7 Cables are recommended for maximum performance.

The HCE II supports embedded lossless audio formats, bi-directional IR signals, and HDCP-protected content. The ultra slim design makes for a compact, discreet installation.

Evolution Uncompressed 4K HDBaseT Extender

The Evolution by Vanco EVEXHDB3 HDBaseT 3.0 extender offers multiple options for pass-through control, and audio including eARC and ARC, along with PoH while being able to extend uncompressed 4K with HDR up to 164ft/50m over a single Cat6 or up to 328ft/100m using Cat6a/7. Control signals include bi-directional IR pass-through to control IR sources, either way, bidirectional USB for KVM pass-through to control sources with a keyboard and mouse, and RS-232 pass-through for 3rd party control. Audio options include the ability to embed audio from a separate audio source, de-embed or extract audio from the HDMI signal, as well as eARC (Enhanced Audio Return Channel) and ARC (Audio Return Channel). In addition, the EVEXHDB3 allows for 1Gb ethernet pass-through. A great solution when trying to extend a network for streaming or control along with the audio and video signals over a single Cat6/6a/7 cable. The transmitting unit is equipped with an HDMI loop-out, to connect to a local display, combine with another HDMI distribution product, or extract audio. Power over HDBaseT (PoH) Technology transmits power over Cat6/6a/7, allowing either the Transmitter or Receiver to be powered without the use of a power supply. For extending uncompressed 4K with HDR, along with checking multiple boxes for control and audio options and more, the EVEXHDB3 is the perfect solution for any application.

The EVEXHDB3 includes two units: transmitting unit (EVEXHDB3-TX) and receiving unit (EVEXHDB3-RX). The transmitting unit is used to capture the HDMI input with additional signals and carries the signals via a single Cat6/6a/7 cable. The receiving unit is responsible for equalizing the transmitted HDMI signals and reconstructing other signals.

*NOTE – All specifications and ratings for the EVEXHDB3 have been tested and confirmed using Cat6 and Cat6a cabling. Cat5e is not recommended.

HDMI KVM Extender 4K/60Hz HDR 230ft/70m

The Evolution by Vanco EVEXKVM3 HDMI Extender over single Cat6 with Digital Audio Breakout, HDMI Loop-out, KVM, and PoE, extends 4K@60Hz, 4:4:4 Chroma, and HDR10 up to 230ft/70m. USB pass-through allows for controlling a security NVR/DVR, computer, NAS system, touch screen display, or other components that are controlled by USB with this extender. No need to run a separate line or extender just for USB control! Vanco’s patented bi-directional Power over Ethernet (PoE) Technology transmits power over Cat6, allowing either the Transmitter or Receiver to be powered without the use of a power supply for an easy installation. The transmitter is equipped with an HDMI loop-out for local monitoring or use with other distribution products. The receiver features digital optical output to break multi-channel audio out to amplifiers for a better listening experience. No EDID or EQ adjustments are necessary as the units automatically adjust for compatibility and gain. For extending full 4K resolution with up to 60Hz, 4:4:4 chroma subsampling, and HDR10, with options for connecting a keyboard, mouse, and other USB peripherals, the EVEXKVM3 is a great plug and play solution for connecting the latest components!

The EVEXKVM3 includes two units: transmitting unit (EVEXKVM3-TX) and receiving unit (EVEXKVM3-RX). The transmitting unit is used to capture the HDMI input with KVM signals and carries the signals via one cost effective Cat6 cable. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing KVM signals. The EVEXKVM3 offers the most convenient solution for HDMI extension over a single Cat6 with Power over Ethernet, and is the perfect solution for any application.

NOTE: – All specifications and ratings for the EVEXKVM3 have been tested and confirmed using Cat6 cabling. Cat6 or better is strongly recommended for optimum performance, achieve rated distance, and to maximize resolution capabilities of this product. Cat5e is not recommended and may not achieve distance and/or resolution expectations.

HDMI Extender Over Cat5e/6 Cable with IR and HDMI Loop-Out

The HDEX60 by Vanco extends 1080p high-definition video, audio, IR, and power up to 196ft (60m). Power over Ethernet (PoE) technology transmits power over Cat5e/6 cabling to either the transmitter or receiver unit without the need for a power supply. No EDID or EQ changes are necessary as the units automatically adjusts with dynamic EDID management. HDMI loop-out is built into the transmitter for connecting additional local displays, AVR, or other system components. IR pass-through also allows for source control from the display location.

Ultra Slim HDMI® over Single Cat5e/Cat6 Cable Extender with PoE

The Evolution by Vanco EVEX2006 HDMI Extender over Single Cat5e/6 with Bi-directional IR, auto EDID/EQ, and PoE extends high definition video and audio signals, IR, and power at a distance of up to 164ft/50m over a single Cat5e/6 cable. Power over Ethernet (PoE) Technology transmits power over Cat5e/6, allowing either the Transmitter or Receiver to be powered without the use of a power supply. No EDID or EQ adjustments are necessary as the units automatically adjusts for compatibility and gain. This extender set also features a newly redesigned slim and compact chassis for easy and flexible
installations. This product fully supports DTS-HD and Dolby TrueHD audio formats, and is HDCP compliant. In addition, bidirectional IR pass-through allows for source or display control. For extending HDMI over a single Cat5e/6 with IR at a long distance, with Power over Ethernet, the EVEX2006 is a great plug and play solution!

The EVEX2006 includes two units: transmitting unit (EVEX2006-TX) and receiving unit (EVEX2006-RX). The transmitting unit is used to capture the HDMI input with IR signals and carries the signals via one cost effective Cat5e/6 cable. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR signals. The EVEX2006 offers the most convenient solution for HDMI extension over a single Cat5e/6 with Power over Ethernet, and is the perfect solution for any application.

Tech Support Tips:

• Please install as a complete set. Due to necessary changes to the product over time, do not mix with other EVEX2006 units or other products within the same family (EVSP1013, EVSP1017, EVRX2006, EVWP2006, EVWP2006TX/RX) to ensure compatibility and functionality
• Recommended to be used with a permanent source, or non-rotating source. For any rotating source such as a conference room type setup, it is recommended to use an HDBaseT extender
• HDMI UHD Deep Color mode on some LG displays may need to be deactivated to avoid video signal issues
• Input Signal Plus on some Samsung displays may need to be deactivated to avoid video signal issues

 Ultra Slim HDMI Extender 4K/60Hz

The Evolution by Vanco EV4K2006 HDMI Extender over Single Cat5e/6 with Bi-directional IR, auto EDID/EQ, and Bi-directional PoE extends 4K ultra high definition video with HDR and audio signals, IR, and power. Extends 4K@60Hz, 4:4:4 Chroma Subsampling and HDR up to 164ft/50m, and 4K@30Hz, 4:4:4 Chroma Subsampling, and HDR up to 130ft/40m. Bidirectional Power over Ethernet (PoE) Technology transmits power over Cat5e/6, allowing either the Transmitter or Receiver to be powered without the use of a power supply. No EDID or EQ adjustments are necessary as the units automatically adjusts for compatibility and gain. This extender set also features a newly redesigned slim and compact chassis for easy and flexible installations. This product fully supports DTS-HD and Dolby TrueHD audio formats and is HDCP compliant. In addition,
bi-directional IR pass-through allows for source or display control. For extending HDMI over a single Cat5e/6 with IR at a long distance, with Power over Ethernet, the EV4K2006 is a great plug and play solution!

The EV4K2006 includes two units: transmitting unit (EV4K2006-TX) and receiving unit (EV4K2006-RX). The transmitting unit is used to capture the HDMI input with IR signals and carries the signals via one cost effective Cat5e/6 cable. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR signals. The EV4K2006 offers the most convenient solution for HDMI extension over a single Cat5e/6 with Power over Ethernet and is the perfect solution for any application.

Tech Support Tips:

• Not recommended to be used with other HDMI distribution products such as splitters and matrix units. Evolution HDBaseT extenders are recommended for combining with HDMI distribution products
• Recommended to be used with a permanent source, or non-rotating source. For any rotating source such as a conference room type setup, it is recommended to use an HDBaseT extender
• HDMI UHD Deep Color mode on some LG displays may need to be deactivated to avoid video signal issues
• Input Signal Plus on some Samsung displays may need to be deactivated to avoid video signal issues

4K HDMI Extender

Extends a 4K@30Hz HDMI Signal up to 40 m (130 ft.) or a 1080p@60Hz HDMI Signal up to 70 m (230 ft.) over a Single Cat6 Ethernet Cable, Transmitter and Receiver, Black

Easily extend an Ultra-High-Definition (UHD) signal via a single Ethernet cable to achieve long-distance transmissions.

The Manhattan 4K HDMI over Ethernet Extender Kit lets you transmit an audio/video signal in 4K@30Hz (3840 × 2160) up to 40 m (164 ft.) or 1080p@60Hz up to 70 m (230 ft.) via a single RJ45 Cat6 Ethernet cable. The Kit provides reliable video and multichannel audio transmission for your streaming device, gaming console (PS4, PS4 Pro, PS5, Xbox Series X/S, Switch etc.), Blu-ray player, satellite receiver, PC, laptop, MacBook^® or other HDMI device over longer distances than standard HDMI cables alone can achieve. The transmitter and receiver have additional 3.5 mm jacks for Infrared (IR) inputs that let you control the source or display at either end of the setup.

Flexible Solution for Many A/V Applications

Ideal for trade shows, classrooms, home theater, conference rooms, business office and retail applications, the Manhattan 4K@30Hz HDMI over Ethernet Extender Kit is a cost-effective solution that boosts and extends an HDMI signal to where it's needed. Ethernet cabling - shielded or unshielded - has a higher range than HDMI cabling with in-line signal repeaters. When used with our Extender Kit, network cable delivers the clear, sharp and vivid picture that you've come to expect from HDMI cable.

Quality Construction and Easy Installation

HDCP 1.4 compliant with HDMI, the Manhattan 4K HDMI over Ethernet Extender Kit is tested to guarantee performance and reliability. It installs quickly without having to run software or install additional hardware. Built into the modules are mounting brackets that let you tidily install their metal housings on the wall or ceiling.

HDBaseT™ 4K@60Hz, 4:4:4 Chroma, HDR Extender 164ft/50m

The Evolution by Vanco EVEX4K50 HDBaseT 4K@60Hz, 4:4:4 Chroma, HDR Extender with Bi-directional IR, and Power over Cable (PoC) extends 4K/60Hz, 4:4:4 with HDR along with audio, and RS232 at a distance of up to 164/50m over a single Cat5e/6 cable. Also able to pass 1080p/60Hz up to 230ft/70m. Power over Cable (PoC) Technology transmits power over Cat5e/6, allowing either the Transmitter or Receiver to be powered without the use of a power supply for an easy installation. No EDID or EQ adjustments are necessary as the units automatically adjust for compatibility and gain. In addition, RS-232 and bi-directional IR pass-through allows for source and/or display control. For extending full 4K resolution with up to 60Hz, 4:4:4 chroma subsampling, and HDR, the EVEX4K50 is a great plug and play solution for connecting the latest components!

The EVEX4K50 includes two units: transmitting unit (EVEX4K50-TX) and receiving unit (EVEX4K50-RX). The transmitting unit is used to capture the HDMI input with IR signals and carries the signals via one cost effective Cat5e/6 cable. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR signals. The EVEX4K50 offers the most convenient solution for 4K extension over a single Cat5e/6 with Power over Cable, and is the perfect solution for any application.

HDBaseT Extender Set with Wall-Plate Transmitter

The Evolution by Vanco EVWP3000 HDBaseT extender with single-gang wall-plate transmitter supports resolutions up to 4K@60Hz, 4:4:4 chroma over a single Cat5e/6 cable up to 131ft (40m) or 1080p@60Hz up to 230ft (70m). Featuring HDBaseT technology, this extender set supports audio, video, IR, and Power over HDBaseT (PoH) that transmits power over the Cat5e/6 cable. The EVWP3000 is a great wall-plate solution for extending HDMI signals using HDBaseT technology for both residential and commercial installations.

HDTools UHD HDMI 2.0, 4K60 4:4:4, HDCP 2.2, HDR, Bi-directional IR & RS-232, Bi-directional PoE over HDBaseT Transmitter/Receiver Set

The HCE III-L Tx/Rx is a premium HDMI 2.0 HDBaseT™ Extension System for Ultra HD/4K and HDR formats featuring an HDMI loop out on the transmitter for preview monitoring, as well as an additional output on the receiver for local distribution. The HCE III-L Tx/Rx supports 4K@60Hz with 4:4:4 chroma sampling, as well as HDMI data rates up to 18 Gbps with HDCP 2.2 compliance.

The HCE III can transmit Ultra HD/4K signals to distances up to 130 feet (40 meters) and 1080p to distances up to 230 ft. (70 meters) over a single category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoC.

Individual units also available: HCE III-L Transmitter and HCE III-L Receiver

HDTools USB-C 30 Meter CAT Transmitter/Receiver Kit

The EZU easily extends Windows, Chrome, and Mac laptops, or other USB-C video signals, up to 164 ft. (50m) at 4K60 and even farther at lower refresh rates and resolutions . The receiver conveniently provides an HDMI output connector, allowing USB-C video signal to convert to and seamlessly connected to a display. Simple and effective, the EZU allows worry free extension of USB-C Alt DP Mode video signals to your display.

4K60 1×4 HDBaseT Distribution System

The HT-140U 4K60 HDBaseT distribution system makes signal distribution simple and effective. Compatibility with virtually every video and audio format means hassle free installation and operation. Our EDID management system makes it easy to select from over 32 EDID tables, alleviating issues of handshaking in all applications.

**To be used with HT-140U-Rx sold separately (Link)**

4K60 1×4 HDBaseT Distribution System

The HT-140U-Rx 4K60 HDBaseT distribution system makes signal distribution simple and effective. Compatibility with virtually every video and audio format means hassle free installation and operation. Our EDID management system makes it easy to select from over 32 EDID tables, alleviating issues of handshaking in all applications.

**To be used with HT-140U (Link)**

4K HDBaseT Receiver for HTX III Series

The HTX III-RX is designed for use with the HTX III-4400 and HTX III-8800 Matrix Switcher to extend 4K60 4:4:4 video, audio, two-way IR, and RS-232 signals up to 492 ft. (150m). Using PoC technology, the HTX III-RX can draw power directly from the HTX III-4400/HTX III-8800, eliminating the need for additional power supplies.

Couple the HTX III-RX with the

 iCON Control System for easy implementation of Video/Audio/IR/RS232 matrixing and control of your space.

4K HDMI and USB-C Over HDBaseT 3.0 100 Meter Extension System with Bi-Directional PoC

The HUE-100 HDMI and USB-C HDBaseT 3.0 extension system offers full HDMI 2.0b, HDR/HDR10/HDR10+ (High Dynamic Range) 4K@60Hz 4:4:4 up to 100 meters on CAT6a/7 cable. The HUE-100 can also transport 1080P60 8 bit up to 150 meters over CAT6a/7 cable. Manual or automatic selection of HDMI and USB-C inputs is available on front panel controls and API. User defined EDID and extraction of display EDID are easy operations using the HUE-100simple API.

The HUE-100 provides Dolby Vision, HLG, multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoC – all with zero loss and zero noise. The HUE-100 also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM. Additionally, the low profile “slim box” enclosure design makes the HUE-100 ideal for limited space installation environments, such as behind flat panel displays and video walls.

4K60 100 Meter Wallplate Extender Switching System with RX Local Auto Switching Input

The HWCE IV HDBaseT extender system provides 328 feet (100 meters) of full 4K60 4:4:4 HDR10+ extension. The wallplate transmitter is powered by the receiver (PoC), and allows manual or automatic switching (last or currently connected, with HDMI priority) between the HDMI and USB-C inputs. The Receiver provides a local auto switching HDMI 4K60 input.

4K60 HDMI & USB/KM Double Gang In-wall AV over IP Encoder

The VIP-T400-E-WP is a 4K60 HDMI & USB/KM AV over IP Encoder Wallplate, designed to work together with the VIP-T400-E/D system, delivering high-quality UltraHD/4K60 4:4:4 HDR video, USB, and high-res audio over IP networks. It supports point-to-point extension up to 394ft (120m) via Cat6a and accommodates various signal types for dependable distribution, switching and matrixing needs. The proprietary channel display makes it easy to identify which source you want distributed to which display. Up to 1000 sources and even more displays can be added to the system.

Key features include ultra-low latency, quick or instant switching, video wall processing, 2ch stereo analog audio embedding. Additionally, the VIP-T400-E-WP provides diverse control options including its own API, PureLink’s iCON™ Control/Automation platform, Purelink’s VPX™ IP Video Management Software, as well as modules/plugins for Crestron and Q-Sys . It is TAA compliant, ensuring suitability for government, military, and 24/7/365 installations.

4K-HDR over HDBaseT Extension System – TAA Compliant

The HTE-T III 4K-HDR HDMI Extender over Single Cat.X with HDBaseT, RS-232, Bi-directional IR, Ethernet, PoC & ARC boosts up your video/audio transmission distance to 100m (330ft) in HDTV 1080p with 36-bit color depth and 70m (230ft) at 4K-HDR. With the advanced design for the latest HDMI 2.0a technology, deep color video, DTS-HD or Dolby TrueHD audio, and HDCP 2.2 supports and compatibility are all further insured.

Full HD HDMI & USB/KVM over IP with PoE & MultiView – Encoder

The VIP-150-E is a Full HD HDMI & USB/KM AV over IP Encoder, part of the VIP-150 Multiview AV over IP system, delivering high-quality 1080P60 4:4:4 video, USB, and high-res audio over IP networks. It supports point-to-point extension up to 394ft (120m) via Cat6a and accommodates various signal types for dependable distribution, switching and matrixing needs. The VIP-150 AV over IP system provides instant image switching, and easy connections of inputs and output using the visual VIP-150 iCON Lite control interface. VIP-150 iCON Lite also makes creating a multiview arrangement on your display simple with drag and drop. Also create up to 10×10 video walls easily, and embedding and de-embedding audio is automatic by simply connecting your auxiliary audio input, or connecting the audio output of the decoder to your audio system or processor. Gran the RTSP stream to display thumbnails on your control interface for easy identification of source program, for assignment to your displays.

The VIP-150 is designed and a perfect solution for:

• Restaurants and Bars
• Fitness Centers
• House of Worship
• Museums
• Hospitality
• Retail Stores and Malls
• Bowling Centers

Full HD HDMI & USB/KVM over IP with PoE & MultiView – Decoder

The VIP-150-D is a Full HD HDMI & USB/KM AV over IP Decoder , part of the VIP-150 Multiview AV over IP system, delivering high-quality 1080P60 4:4:4 video, USB, and high-res audio over IP networks. It supports point-to-point extension up to 394ft (120m) via Cat6a and accommodates various signal types for dependable distribution, switching and matrixing needs. The VIP-150 AV over IP system provides instant image switching, and easy connections of inputs and output using the visual VIP-150 iCON Lite control interface. VIP-150 iCON Lite also makes creating a multiview arrangement on your display simple with drag and drop. Also create up to 10×10 video walls easily, and embedding and de-embedding audio is automatic by simply connecting your auxiliary audio input, or connecting the audio output of the decoder to your audio system or processor. Gran the RTSP stream to display thumbnails on your control interface for easy identification of source program, for assignment to your displays.

The VIP-150 is designed and a perfect solution for:

• Restaurants and Bars
• Fitness Centers
• House of Worship
• Museums
• Hospitality
• Retail Stores and Malls
• Bowling Centers

4K60 HDMI & USB/KM CAT and Fiber – AV over IP Encoder – TAA

The VIP-T400 4K HDMI & USB/KM CAT and Fiber AV over IP Encoder provides UltraHD/4K60 4:4:4 HDR video, audio, RS-232, IR, and USB 1.1, 2.0, and USB camera signal transport over IP networks. The VIP-T400 can be used as a point-to-point extension system supporting distances up to 120 meters over CAT6a, and up to 2 kilometers over SFP Single Mode Fiber, and is also compatible with MultiMode SFP for shorter distances. The VIP-T400 is designed to handle multiple signals types for applications that require reliable distribution, switching, matrixing, and layered matrix switching. The VIP-T400 supports audio insertion and extraction. Multiple control options are available including the VIP-T400’s own rich API, PureLink’s VPX IP Video Management Software, and QSC plugin. Providing complete and reliable AV over IP extension, the VIP-T400 is the ideal solution for your application. The VIP-T400 is TAA compliant, making it perfect for Government and Military applications and critical viewing 24/7/365 installations.

HDMI Extender over Single Cat5e / Cat6, 1080P - 60 Meter (197ft)

FireFold's HDMI Extender lets you extend HDMI audio/video signal by up to 60 meters (196 feet) over single Cat5e/Cat6 Cable. The HDMI Extender kit includes both the local transmitter and remote receiver units, perfect for point-to-point digital signage applications that require high quality HDMI™ video. For perfect performance, the extender comes with a EDID function on the transmitter, which enables user to adjust the signal to best match the cable length.

HDMI 4K Extender over Single Cat6 w/ IR Extension - 229ft

When trying to extend a HDMI connection, using longer HDMI cables may not be an option, nor may it be easy to run the cable in the walls of your residential or commercial building when compared to Ethernet cables. The HDMI extender over Cat6 cable provides an efficient and simple method to extend the HDMI connection using Ethernet cables. With support for resolutions up to 4K 60Hz at 229 feet, expanding the HDMI signal couldn't be easier, while supporting Ultra HD resolutions for an optimal viewing experience.

How it Works

The HDMI extender comes with a sender and receiver. The sender will plug into a HDMI source, such as a Blu-ray or DVR player. On the other end of the sender is a Cat6 RJ45 Ethernet port. A Cat6 cable is plugged into the RJ45 Ethernet port and then plugged into the other end on the receiver side. On the receiver side, another HDMI cable would then plug into a display for output. IR cables are also included for using a remote control.

Metal Enclosure

Constructed with a metal enclosure, the HDMI extender provides a solid and sturdy build that can be used in a variety of applications.

4K 60Hz HDR Support

The HDMI extender supports resolutions up to 4K / 60Hz at 229 feet with Cat6/6a, delivering stunning picture quality at a longer distance. For those limited by 1080p over longer distances, this solves the issue.

IR Support

What's the point in extending a HDMI signal if you can't control the source device remotely. The extender includes IR support, allowing IR cables to be plugged in on the sender and receiver side. This provides remote control functionality on the display side.

HDMI Loopout, S/PDIF Audio Output, Lightning, Surge, and ESD protection

The HDMI extender features an HDMI loop out port for connecting and viewing a local HDMI display. The extender also includes a independent S/PDIF audio port for extracting and outputting audio. Easily switch between the two audio output modes on the receiver, ARC or S/PDIF. Audio Return Channel (ARC): Allows user to have one connection between TV to audio receiver or sound bar. Send video to the TV with an HDMI cable and the same HDMI cable sends audio from TV back down the same cable. Lightning, Surge, and ESD protection are all built into the device to keep it safe and lasting long.

Wall Mountable Design

Included with the HDMI extender are mounting brackets and screws. This extender features a wall-mountable design for a clean and flexible installation.

Applications