Intellinet Industrial Gigabit PoE++ Splitter, 508940
Intellinet Industrial Gigabit PoE++ Splitter
IEEE 802.3bt (4PPoE) Compliant, up to 60 W Input, 12 V / 4.25 A DC Output, IP30-rated Metal Housing, DIN-rail Mount
Turn a higher-power PoE link into separate DC/terminal-block power and Gigabit data connections
Need power but don’t have an outlet? Take it from your PoE network with the Intellinet Industrial Gigabit PoE++ Splitter. With a simple Ethernet cable connected to your PoE++ Switch or injector, this Splitter can give up to 51 W to a non-PoE device in tough or industrial environments via your choice of output — a 2-pin terminal block or a DC jack — and still provide a gigabit network connection. It’s a great choice for non-PoE cameras, laptops, and other devices that require a power adapter, and it’s cheaper in both time and money than hiring an electrician.
Intellinet Power over Ethernet (PoE+) Splitter, 560443
Intellinet Power over Ethernet (PoE+) Splitter
IEEE802.3at, 5, 7.5, 9 or 12 V DC output voltage
Deliver Power over Ethernet to remote devices
The Intellinet Network Solutions PoE+ Splitter allows you to deliver both data and electrical power to non-PoE Ethernet-enabled products using the Cat5 Ethernet cable. Using the PoE Splitter, you can take advantage of Power over Ethernet and place Ethernet-enabled products, such as Network Cameras and Wireless Access Points*, where power outlets are not readily available.
Simplify Installation for an Ethernet-based Device
Having to manage only an Ethernet cable simplifies the physical installation of the device. Without having to worry about the availability of a power source, you can mount Ethernet-enabled products on a ceiling or outdoors, up to 100m (328 feet)** from a power source. The PoE Splitter is simple to install and requires no tools or software.
802.3af Compliant Power over Ethernet
The PoE Splitter can be used to complement any PoE injector unit or midspan switch to provide small to medium-sized businesses a complete end-to-end PoE solution. This unit supports 802.3af and 802.3at, ensuring compatibility with other 802.3af/t PoE-compliant injector units or PSE switches.
Adjustable Power Output
During the setup, the PoE Splitter can be set to power any compatible 5 V, 7.5 V, 9 V or 12 V Ethernet-enabled device via the volt selector located on the side.
** Maximum distance per 802.3u specifications.
TP-Link TL-POE10R PoE Splitter
When you're setting up an IP camera or phone in a place without power, the TP-Link TL-POE10R PoE Splitter offers a convenient plug and play solution to routing power to the device. Designed to work with all IEEE 802.3af PoE compliant PSE (Power Source Equipment) or PoE Supplier Adapters, such as TP-LINK's TL-SG3424P, TL-SF1008P, or TL-POE150S, this splitter offers gigabit speed support and a selectable power output.
- (1) Cat5E UTP Ethernet Cable
- (1) TL-POE10R PoE Splitter
- (1) Power Cable
- (1) User Guide