3U

Cat5E Patch Panel 110 Type

Networking Made Simple

Our Cat5E Patch Panel is designed to provide amazing performance and cable management. Each Cat5E Patch Panel comes with 110-type termination while meeting and exceeding EIA/TIA TSB-40 Cat5E connecting hardware specifications.

What makes it so simple?

Besides the 110 termination that this network patch panel offers, there are 12 individual Cat5E ports on the front side. Once you get your cables terminated on the one side, you just plug and go on the other. This is a very quick and easy solution for being able to swap out devices at any time. Plus, with numbered ports, you can easily keep track of what is plugged in where for better organization.

Need to mount this up where you won’t be able to reach it so easily? These patch panels accommodate top, bottom or side cable entry. This leaves plenty of options on being able to get to your cables once you have everything set up. These IT patch panels are also able to handle wire diameters of 22AWG to 26AWG, so you should be able to easily find wires to fit.

What makes these so great?

Each patch bay is a high-density 1.75 inch by 19-inch panel. This product is 1U, with a U (unit) being the standard size for a single rack interval. While others are 2 and 3U, there will be no such waste of space here.

These network panels meet TIA/EIA-568B.2/568B.2-1 Cat.5E ISO/IEC 11801 and EN 50173-1 specifications, so they are up to the latest standards. UL certified, they have been also tested to the highest standard for safety.

Kendall Howard 1916-2-100 Wall Mount V-Rack

Kendall Howard is one of the top companies out in the rack mount market. Their merchandise ranges to various products besides rack mounts alone, though, and are always high quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

Kendall Howard V-Racks allow you to vertically or horizontally mount servers or other rack-mountable devices regardless of depth. Designed to mount on a wall or under a desk, the Kendall Howard V-Rack provides users more versatility on where they can place their products while saving them space.

These v-racks are low profile, meant to be barely visible from a front view. Each can hold up to 150 pounds easily, so most of your equipment should be able to be on them. They only weigh about 4 pounds themselves, so they are relatively lightweight for easy installation. Each one of these comes in a black powdered finish so that they will blend in with most of your other mounting equipment with ease.

Made in the USA and backed by a limited lifetime warranty from Kendall Howard, you really cannot go wrong with this great product.

What else could you ask for? Well, you might say to yourself, “I could go for a great price.” You’re in luck! You’re at FireFold, where our middle name might as well big ‘great price’. It is not, but, that doesn’t mean you cannot get a price. Just glance up there in the upper right and drool in amazement. You’ll be happy when you make this purchase and so will your wallet!

Vertical Wall Mount Rack / Bracket

This highly functional and durable aluminum vertical wall mount rack from Vertical Cable is designed to work with standard 19 inch rack mountable equipment and is compatible with most major brands. It mounts flush to the wall or discreetly under a desk for a clean installation. It includes pre-drilled holes for #12-24 screws and both screws and washers are included.

Applications

The 047-WVR is an excellent fit for compact or specialized tech environments, including:

• Under-Desk IT Setups
  
• Wall-Mounted Network Access Points
  
• Small Office or Home Office (SOHO) Installations
  
• AV Patch Panel Mounting
  
• Security Device Housing in Tight Spaces

Kendall Howard V-Rack - Tapped Rails

Kendall Howard V-Racks allow you to vertically or horizontally mount servers or other rack-mountable devices regardless of depth. The V-Racks with 10-32 tapped rails are great for smaller rackmount equipment. Designed to mount on a wall or under a desk, the Kendall Howard V-Rack provides users more versatility on where they can place their products while saving them space.

• Low profile design
• Tapped rails
• Includes 12 10-32 Rack Screws
• No depth restrictions
• 150 lb. weight capacity
• 19" EIA compliant
• Made in the USA
• Limited Lifetime Warranty

Quest 15 Inch 3 Unit (3U) Vented Cantilever Rack Shelf

Networking Made Simple

The Vertical Cable Cat5E Patch Panel is designed to provide amazing performance and cable management. Each Cat5E Patch Panel comes with 110-type termination while meeting and exceeding EIA/TIA TSB-40 Cat5E connecting hardware specifications.

What makes it so simple?

Besides the 110 termination that this network patch panel offers, there are 12 individual Cat5E ports on the front side. Once you get your cables terminated on the one side, you just plug and go on the other. This is a very quick and easy solution for being able to swap out devices at any time. Plus, with numbered ports, you can easily keep track of what is plugged in where for better organization.

Need to mount this up where you won’t be able to reach it so easily? These patch panels accommodate top, bottom or side cable entry. This leaves plenty of options on being able to get to your cables once you have everything set up. These IT patch panels are also able to handle wire diameters of 22AWG to 26AWG, so you should be able to easily find wires to fit.

What makes these so great?

Each patch bay is a high-density 1.75 inch by 19-inch panel. This product is 1U, with a U (unit) being the standard size for a single rack interval. While others are 2 and 3U, there will be no such waste of space here.

These network panels meet TIA/EIA-568B.2/568B.2-1 Cat.5E ISO/IEC 11801 and EN 50173-1 specifications, so they are up to the latest standards. UL certified, they have been also tested to the highest standard for safety.

The OCAP-3 from Middle Atlantic provides open ventilation for cable and satellite boxes or any high heat components. Rubber lined clamping bars secure the box or component. Made from 16-gauge steel with a sturdy black powder coat.

This shelf is a great accessory for any rack mount due to its durability and numerous depth choices. It is featured in cold rolled steel 16 AWG with a black powder coat finish.

Forge blank panels quickly and cleanly fills any gaps between equipment.