All

Keystone Wall Plate with Mounting Screws

FireFold Keystone Wall Plates are compatible with any standard size keystone jack. They are made of durable ABS plastic for long life.

Available in a wide variety of colors and port configurations, these wall plates are quick and easy to install. Each plate comes complete with mounting screws.

Keep your cables organized and get a professional look.

Please note: Slight hue variations may occur between keystone jacks and the matching keystone wall plates. If you need to ensure there is no variation, please contact customer service at 704-979-7100 before placing your order.

Cat6 Ethernet Patch Cable, Black

Thanks to the fact that so much of our personal and professional lives now revolve around the Internet, to say that the quality of the networks that we depend on every day is important is a little bit of an understatement. Regardless of the size of the network you're constructing or even the environment that you're working in, anything less than the best just won't do in terms of your Cat6 Ethernet cable selections. For the jobs that matter most, FireFold is proud to lead the charge and offer some of the finest options available in that regard that money can buy.

With a performance of up to a stunning 550 MHz, our Cat6 Patch cable selections guarantee the speed, versatility and ingenuity you need when you need them the most. All of these cables feature not only an enhanced electrical performance (designed to support all of today's bandwidth-heavy applications), but they're also backwards compatible with any 10BaseT or 100BaseT network cards and hubs that you may currently be using.

All of these cables are constructed from four superior quality unshielded twisted pairs of 24 AWG stranded copper, complete with a sophisticated and rugged PVC jacket. The UTP wires themselves go a long way towards reducing the types of cross-talk that you're likely to experience in certain situations, all while helping to boost signal quality and data transmission at the exact same time. Even the RJ45 connectors have exceptional 50 micron gold plated contacts that are intended to help resist corrosion and degradation for years to come.

Not only that, but the molded strain relief boots present in our Cat6 Ethernet cable options help to avoid snags, tears and other issues during installation or maintenance that could potentially damage your cable over time. Make no mistake: these are molded in a very particular way not only to guarantee the flexibility you demand, but to also resist everyday wear and tear in a way that allows these cables to stand the test of time for years to come.

All Cat6 Ethernet cable options from FireFold come complete with a 60 day money back guarantee, a lifetime warranty and much, much more.

Cat6 Ethernet Patch Cable, Blue

Thanks to the fact that so much of our personal and professional lives now revolve around the Internet, to say that the quality of the networks that we depend on every day is important is a little bit of an understatement. Regardless of the size of the network you're constructing or even the environment that you're working in, anything less than the best just won't do in terms of your Cat6 Ethernet cable selections. For the jobs that matter most, FireFold is proud to lead the charge and offer some of the finest options available in that regard that money can buy.

With a performance of up to a stunning 550 MHz, our Cat6 Patch cable selections guarantee the speed, the versatility and the ingenuity you need when you need them the most. All of these cables feature not only an enhanced electrical performance (designed to support all of today's bandwidth-heavy applications), but they're also backwards compatible with any 10BaseT or 100BaseT network cards and hubs that you may currently be using.

All of these cables are constructed from four superior quality unshielded twisted pairs of 24 AWG stranded copper, complete with a sophisticated and rugged PVC jacket. The UTP wires themselves go a long way towards reducing the types of cross-talk that you're likely to experience in certain situations, all while helping to boost signal quality and data transmission at the exact same time. Even the RJ45 connectors have exceptional 50 micron gold plated contacts that are intended to help resist corrosion and degradation for years to come.

Not only that, but the molded strain relief boots present in our Cat6 Ethernet cable options help to avoid snags, tears and other issues during installation or maintenance that could potentially damage your cable over time. Make no mistake: these are molded in a very particular way not only to guarantee the flexibility you demand, but to also resist everyday wear and tear in a way that allows these cables to stand the test of time for years to come.

All Cat6 Ethernet cable options from FireFold come complete with a 60 day money back guarantee, a lifetime warranty and much, much more.

Vertical Cable 1000ft Solid Cat6 Bulk Cable 

Ideal for the more advanced networking installations, Vertical Cable's Cat6 Bulk Cable is a must-have for any extensive networking application where a higher bandwidth is called for.

Category 6:

The next step up from standard Cat5E cable, Category 6 (Cat6) is a "twisted pair" network cable used for carrying data signals at speeds of up to 550MHz of Bandwidth. This cable is preferred for more advanced networking installations where a higher bandwidth than normal is required.

PVC Jacket

Our Cat6 Solid Bulk Cable comes wrapped in a sturdy PVC (Polyvinyl Chloride) Jacket, built to withstand high levels of stress, pulling, and pushing.

Solid Cable Design

Designed for more straight-forward, simple installations, this particular style of Solid cable is perfect for most installations where cable runs do not require several bends and twists in the line.

Pull-Through Design

Since bulk cable is generally used in intervals, the box that it comes in is almost as important as the cable itself. This is the reason why our boxes are reinforced to provide excellent protection and are made with a simple pull-through design to keep your bulk cable free of kinks and knots while being pulled from the box.

Cat6 Keystone Jack In 110 Style & UL Verified - FireFold

The Cat6 jack provided by us comes with a standard RJ45 plug on the outside. While on the inside, wiring slots are in place for a tool required termination. All of our networking keystone jacks have 568A and 568B color codes on the jacks in addition to the easy trouble free 110 style termination.

Meeting All Requirements

Each RJ45 keystone jack is flame retardant and UL verified for quality and safety. These RJ45 jacks are 14.5mm wide by 16mm high and are easily able to fit in most standard keystone jack wall plates. Plus, they come in a variety of colors - both to help you keep your cables organized but to also allow you to match your keystone easily to whatever colors you are planning.

You can find a variety of keystone wall plates with us, which allow you to easily customize what you put into each wall plate in your home. You could combine one of these with a coax keystone, or even an RJ11 keystone, with just an easy snapping of each keystone into their place.

Please note: Slight hue variations may occur between keystone jacks and the matching keystone wall plates. If you need to ensure there is no variation, please contact customer service at 704-979-7100 before placing your order.

The Enhanced Performance You Need When It Couldn't Be More Important

Anyone who has worked with networking equipment for any appreciable length of time can tell you that more often than not, the ongoing success of a network has less to do with any one major decision and is more about a series of smaller and more important ones. One of these has to do with the quality of the cabling that you use - something that you cannot afford to view as an afterthought any longer.

When you demand performance, flexibility and ingenuity all rolled into one convenient product, what you're really looking for is the Cat5E Patch Cable from FireFold. Our unique brand of Category 5 Enhanced snagless Ethernet cables aren't just designed to meet TIA/EIA-586 standards - with performance at up to 350 MHz in most cases, they often exceed them in the way that you can depend on.

For many, the best part of our cables is that they're already fully backwards compatible with any 10BaseT or 100BaseT networking cards and hubs that you may happen to have. This means that you can upgrade to our superior quality cables for all of the performance benefits they bring with them WITHOUT having to switch out your older equipment as a result.

But even going beyond that, our Cat5E Patch Cable options are fully constructed from four 24 AWG unshielded twisted pure copper wire strands in a sleek, convenient CMR rated PVC jacket. This means that they're absolutely approved for nearly any general indoor application that you may be working with.

The molded strain relief boot itself is also attached right at the connector, which will prevent snags and other events that could damage your cable either during installation or while performing routine troubleshooting and maintenance later on. Not only that, but our RJ-45 connectors all have 50 micron gold plated contacts - something that virtually guarantees that corrosion is NOT something you have to worry about any longer.

As is true with all of our other patch cable products, our Cat5E Ethernet Patch Cables also come complete with a lifetime warranty, a full 60 day money back guarantee and same day shipping in most situations. You'll also have the full might of our industry leading customer support team to turn to in the event that you should run into any issues.

Cat6 Ethernet Patch Cable, White

Thanks to the fact that so much of our personal and professional lives now revolve around the Internet, to say that the quality of the networks that we depend on every day is important is a little bit of an understatement. Regardless of the size of the network you're constructing or even the environment that you're working in, anything less than the best just won't do in terms of your Cat6 Ethernet cable selections. For the jobs that matter most, FireFold is proud to lead the charge and offer some of the finest options available in that regard that money can buy.

With a performance of up to a stunning 550 MHz, our Cat6 Patch cable selections guarantee the speed, the versatility and the ingenuity you need when you need them the most. All of these cables feature not only an enhanced electrical performance (designed to support all of today's bandwidth-heavy applications), but they're also backwards compatible with any 10BaseT or 100BaseT network cards and hubs that you may currently be using.

All of these cables are constructed from four superior quality unshielded twisted pairs of 24 AWG stranded copper, complete with a sophisticated and rugged PVC jacket. The UTP wires themselves go a long way towards reducing the types of cross-talk that you're likely to experience in certain situations, all while helping to boost signal quality and data transmission at the exact same time. Even the RJ45 connectors have exceptional 50 micron gold plated contacts that are intended to help resist corrosion and degradation for years to come.

Not only that, but the molded strain relief boots present in our Cat6 Ethernet cable options help to avoid snags, tears and other issues during installation or maintenance that could potentially damage your cable over time. Make no mistake: these are molded in a very particular way not only to guarantee the flexibility you demand, but to also resist everyday wear and tear in a way that allows these cables to stand the test of time for years to come.

All Cat6 Ethernet cable options from FireFold come complete with a 60 day money back guarantee, a lifetime warranty and much, much more.

Micro USB Cable for Smartphone, Tablet, Mobile Device

Charge or Transfer

Have you ever tried counting to 10,000? Well, this micro USB cable will do that for you! Well, not that you would know, though - this micro USB cable does it within the blink of an eye. Your capability to charge or transfer information is only as good as your cable. With FireFold’s micro USB cable, you’re sure to have a steady transfer and charge rate as it seamlessly handles the 10,000 connect-disconnect cycles in the background.

What will this cable work with?

This USB micro cable is the standard for most non-Apple products these days. Kindle Fires, Andoid Phones, Windows Phones, and a variety of other products use the micro USB b cable for their data transfer and charging purposes. Since this USB micro cable has become the standard for most other devices, it makes being able to share cables within a household much simpler.

With the USB micro cable’s plug and play capability, you can plug in the needed end into your device and the other end into your charging adapter or computer. After that, the USB micro cable should start charging your device and allow you to transfer your information if applicable.

Specs

This Micro USB cable uses USB 2.0, which is the standard for most USB micro cables. It will still work with most USB 3.0 ports, as 3.0 is typically backwards compatible with 2.0. However, you will usually not see any difference in transfer or charging. This specific cable is 8 inches long, so it is perfect for charging in the car or attaching to your computer and setting it very nearby. If you don’t like lengthy cables lingering around, this is the cable for you.

When you consider all of this, see the price, and know that this product comes with FireFold’s lifetime warranty - what else could you possibly need to think about? Go ahead and get your hands on one of these cables today!

Do I Need a Micro USB Cable?

Chances are, if you own an Android device, USB Micro is the cable you need. Here are just a few of the devices this cable is compatible with:

LG G4, Galaxy Note 2, S3, S4, S6, S6 Edge, Kindle Fire

• (1) Micro USB to Type A Cable in your choice of 8 inches, 3ft, 6ft, or 10ft

Rhino Brackets Low Profile Tilt TV Wall Mount for 32-55 Inch Screens

Low profile simplicity meets functionality in this tilt wall mount bracket from Rhino Brackets. This TV wall mount is designed for flat panel screens measuring 32 to 55 inches and weighing up to 77 pounds. The open architecture of this TV bracket leads to increased ventilation to increase the longevity of your TV components, as well as easy access for wiring during installation. It tilts up to fourteen degrees downward, allowing you to achieve the optimal viewing angle.

The included bubble level guarantees accuracy and a nice, even hang without the need for extra measuring tools. When mounted, it sits less than one inch (25mm) from the wall for a minimum footprint.

Cat5E Keystone Jack 110 Style - High Quality

The Cat5e Keystone Jack

The Cat5 Jack is the most widely used keystone jack in today’s market for networking wall plate solutions or patch panels. Each Cat5 Jack provided by FireFold provides outstanding performance, exceeding the TIA/EIA 568-B industry standard. This makes these keystone jacks perfect for use in today’s high-speed networks while remaining completely backward compatible with all previous standards.

The Cat5 jack provided by us comes with a standard RJ45 plug on the outside. While on the inside, wiring slots are in place for a tool required termination. All of our networking keystone jacks have 568A and 568B color codes on the jacks in addition to the easy trouble free 110 style termination.

Meeting All Requirements

Each RJ45 keystone jack is flame retardant and each is UL verified for quality and safety. These RJ45 jacks are 14.5mm wide by 16mm high and are easily able to fit in most standard keystone jack wall plates. Plus, they come in a variety of colors - both to help you keep your cables organized but to also allow you to match your keystone easily to whatever colors you are planning.

You can find a variety of keystone wallplates with us, which allow you to easily customize what you put into each wall plate in your home. You could combine one of these with a coax keystone, or even a RJ11 keystone, with just an easy snapping of each keystone into their place.

Please note: Slight hue variations may occur between keystone jacks and the matching keystone wall plates. If you need to ensure there is no variation, please contact customer service at 704-979-7100 before placing your order.

Rhino Brackets Low Profile Tilt TV Wall Bracket for 37-70 Inch Screens

This tilt wall mount bracket from Rhino Brackets is both elegant and functional. It is designed for flat panel screens measuring 37 to 70 inches and weighing up to 77 pounds. The open architecture of this TV bracket creates increased ventilation, increasing the longevity of your TV components, as well as offering easy access for wiring during installation. It tilts up to fourteen degrees downward for the optimal viewing angle. When mounted, it sits less than one inch (25mm) from the wall for a minimum footprint.