Yellow

Cat6 Ethernet Patch Cable, Yellow

Thanks to the fact that so much of our personal and professional lives now revolve around the Internet, to say that the quality of the networks that we depend on every day is important is a little bit of an understatement. Regardless of the size of the network you're constructing or even the environment that you're working in, anything less than the best just won't do in terms of your Cat6 Ethernet cable selections. For the jobs that matter most, FireFold is proud to lead the charge and offer some of the finest options available in that regard that money can buy.

With a performance of up to a stunning 550 MHz, our Cat6 Patch cable selections guarantee the speed, the versatility and the ingenuity you need when you need them the most. All of these cables feature not only an enhanced electrical performance (designed to support all of today's bandwidth-heavy applications), but they're also backwards compatible with any 10BaseT or 100BaseT network cards and hubs that you may currently be using.

All of these cables are constructed from four superior quality unshielded twisted pairs of 24 AWG stranded copper, complete with a sophisticated and rugged PVC jacket. The UTP wires themselves go a long way towards reducing the types of cross-talk that you're likely to experience in certain situations, all while helping to boost signal quality and data transmission at the exact same time. Even the RJ45 connectors have exceptional 50 micron gold plated contacts that are intended to help resist corrosion and degradation for years to come.

Not only that, but the molded strain relief boots present in our Cat6 Ethernet cable options help to avoid snags, tears and other issues during installation or maintenance that could potentially damage your cable over time. Make no mistake: these are molded in a very particular way not only to guarantee the flexibility you demand, but to also resist everyday wear and tear in a way that allows these cables to stand the test of time for years to come.

All Cat6 Ethernet cable options from FireFold come complete with a 60 day money back guarantee, a lifetime warranty and much, much more.

Vertical Cable Cat5E Keystone Jack 25 Pack - FireFold

Vertical Cable Cat5E 90 Degree Keystone Jack 25 Pack

The Cat5e Jack is the most widely used keystone jack in today’s market for networking wall plate solutions or patch panels. Each Cat5e Jack provided by FireFold provides outstanding performance, exceeding the TIA/EIA 568-B industry standard. This makes these keystone jacks perfect for use in today’s high-speed networks while remaining completely backward compatible with all previous standards.

The Cat5e jack provided by us comes with a standard RJ45 plug on the outside. While on the inside, wiring slots are in place for a tool required termination. All of our networking keystone jacks have 568A and 568B color codes on the jacks in addition to the easy trouble free 110 style termination.

Meeting All Requirements

Each RJ45 keystone jack is flame retardant and each is UL verified for quality and safety. These RJ45 jacks are 14.5mm wide by 16mm high and are easily able to fit in most standard keystone jack wall plates. Plus, they come in a variety of colors - both to help you keep your cables organized but to also allow you to match your keystone easily to whatever colors you are planning.

You can find a variety of keystone wallplates with us, which allow you to easily customize what you put into each wall plate in your home. You could combine one of these with a coax keystone, or even a RJ11 keystone, with just an easy snapping of each keystone into their place.

Please note: Slight hue variations may occur between keystone jacks and the matching keystone wall plates. If you need to ensure there is no variation, please contact customer service at 704-979-7100 before placing your order.

ICC IC107F6C Cat6 High-Density Keystone Jack 25 Pack

CAT6 High Density (HD) Category 6 modular jacks, RJ-45 keystone jacks, is 8-position 8-conductor (8P8C) is engineered to provide superior performance and reliability, supporting Gigabit Ethernet applications and beyond. The advanced printed circuit board design is tuned to provide optimum signal quality with maximum headroom, allowing it to exceed TIA/EIA Category 6 performance standards. It offers superior signal quality and noise reduction due to its enhanced Near-End and Far-End Crosstalk cancellation and minimum return losses. The Category 6 HD design offers a smaller rear footprint maximizing space in confined work areas.

4C/22 AWG STRANDED PVC 500FT COIL PACK

SCPs Security Wire Coil Packs are very popular with installers because they are easier to work with than boxes or reels. These security wire coil packs come in 22 AWG with either 2 or 4 stranded bare copper conductors in 500 or 1000 ft lengths. SCP Security Wire Coil Packs are tangle-proof, take up less space, and because there is no box or spool, there is less waste and clean-up after the job.

Installation of our Security Wire Coil Packs saves time when pulling multiple wires. Because the wire pulls through the middle of the coil pack, installers can stack the coil packs and pull multiple wires in parallel for faster installation. SCP Security Wire Coil Packs with stranded conductor are available in 10 different PVC jacket colors. Our security wire coil packs are great for security, alarm, and control installations. All of our security wire coil packs are UL and Riser Rated.

4C/22 AWG SOLID COPPER PVC 500FT COIL PACK

Product Information

SCPs Security Wire Coil Packs are very popular with installers because they are easier to work with than boxes or reels. These security wire coil packs come in 22 AWG with either 2 or 4 solid bare copper conductors in 500 or 1000 ft lengths. SCP Security Wire Coil Packs are tangle-proof, take up less space, and because there is no box or spool, there is less waste and clean-up after the job.

Installation SCP Security Wire Coil Packs saves time when pulling multiple wires. Because the wire pulls through the middle of the coil pack, installers can stack the coil packs and pull multiple wires in parallel for faster installation. SCP Security Wire Coil Packs with solid conductor are available in 10 different PVC jacket colors. SCP security wire coil packs are great for security, alarm, and control installations. All SCP security wire coil packs are UL and Riser Rated.

Cat8 S/FTP Shielded Ethernet Patch Cable

FireFold now offers Cat8 Ethernet Network Cables. These cables are capable to reach up to 40Gbps transfer speeds and up to 2GHz bandwidth using copper conductors and RJ45 connectors. Cat8 Ethernet Cables are the first future proof, cost effective, high performance solution. Cat8 patch cables are backwards compatible with all categories: Cat5e, Cat6, Cat6A, and Cat7.

Cat6, SDJ-Series, UTP, 110-Type, 8P8C, RJ-45, Keystone Jack,T568A/B, 25-Pack

Wavenet's category 6 SDJ series UTP keystone jacks have been designed with printed circuit board (PCB) technology providing maximum performance. The 90-degree punch down style keystone jacks are tested to meet and exceed TIA-568-C.2 category 6 100-meter channel performance.

The contact pins are designed with 50 micro-inches of gold-plated contact pins for maximum bandwidth and performance. Each keystone jack has a minimum of 750 cycles of plug insertions.

Wavent THHN 14AWG Solid Copper Wire – High-Performance Electrical Cable

Strong. Reliable. Code-Compliant.

The Wavent THHN Solid Copper Cable is the perfect choice for electrical installations requiring maximum strength and durability. Built with Thermoplastic High Heat-Resistant Nylon-Coated (THHN) insulation, this wire delivers superior protection and consistent performance in both dry and damp environments.

Why Choose Wavent THHN Solid Wire?

• Solid Copper Conductor – Provides excellent conductivity and rigidity for permanent installations.
• Heat Resistant – Rated for 90°C in dry locations
• Abrasion-Resistant Nylon Jacket – Ensures long-lasting protection in conduit and raceway systems.
• UL Listed  – Meets major electrical codes for safety and reliability.
• Voltage Rating: 600V for heavy-duty electrical systems.

Perfect For:

• Electrical wiring in conduit, raceways, and control panels
• Commercial and residential construction
• Industrial power distribution systems