HDMI Cable Tester - Type A and C (Mini) Category 2
This tester is a necessity for home theater buffs and installers. It quickly and accurately checks up to 164 feet of signal continuity on Type A and C HDMI cables so you can move on to the next project. Straightforward LED indicators confirm pass, open, short and cross in three different test modes: fast, slow, and step-by-step manual testing. The compact units come complete with a handy protective carrying case for travel. Requires a DC 9V battery for operation (not included).
Klein Tools IR5 Dual-Laser Infrared Thermometer
The Klein Tools IR5 Dual-laser Infrared Thermometer is designed for rugged field work. With a 6.6-foot drop protection range, you know you're carrying a reliable tool and not a delicate jewel.
The generous measurement range is -22° to 752°F (-30° to 400°C) and distance-to-spot optical resolution ratio is 12:1.
This thermometer features dual laser targeting, auto-scan, max/min/avg/diff and high/low alarm. The backlit display ensures visibility and auto power-off means no drained battery. Battery life expectancy is ten hours of continuous use with the laser and backlight on.
The IR5 includes a protective custom pouch and battery.
Ethereal HDMI Diagnostic Tool
The HDM-DAD, a digital analysis device, will automatically correct the most common problems with HDMI signals, EDID and HDCP communication. Whether distress is caused by inconsistent hardware, improper set-up, or transmission distance, the HDM-DAD can repair HDCP and EDID corruption in no time.
Klein Tools CL150 Flexible AC Current Clamp Meter
Flexible AC Current Clamp Meter
This easy to use, stand-alone meter features an 18-Inch flexible clamp that allows access into panels and hard to reach areas (bundled wires, awkward conductors, and PLC cabinets). True RMS readings with CATIV 600V or CATIII 1000V safety rating. Features backlit LCD display, auto-power off after 15 minutes, Max/Min, Hold, Auto-Ranging and Low Battery icons.
Klein Tools CL110KIT Electrical Maintenance and Test Kit
Electrical Maintenance and Test Kit
Klein Tools Clamp Meter Kit includes the CL110 400A Auto-Ranging Digital Clamp Meter, RT210 GFCI Receptacle Tester and 69409 Line Splitter 10x. The kit allows for easy testing of live circuits and measuring of current and voltage. The kit includes a carrying pouch, test leads and batteries.
Klein Tools ET20 WiFi Borescope
The new Klein Tools’ ET20 Borescope can be quickly connected to your smartphone via the built-in WiFi signal, turning the phone in your pocket into a smart tool. Install the compatible App on your phone to display, record, store and also share your images and videos via text or email. This Borescope enables you to capture high-quality photo and video directly to your device from up to 30 feet away. It features a waterproof 9 mm camera with durable, armored 6-Foot (1.8 m) flexible gooseneck cable, on-board LED lights, convenient pocket clip and rechargeable lithium-ion battery.
Klein Tools ET920 USB Digital Meter, USB-A and USB-C
The Klein Tools ET920 is a USB digital meter for Type-A and Type-C ports. It accurately and reliably measures and displays the USB port voltage, current, capacity, energy, and resistance simultaneously. It can function with any USB-A and most USB-C ports, including Qualcomm Quick Charge® ports that have the ability to deliver power. It requires NO batteries as it draws power from the power source to function.
Klein Tools HVNCVT-1 Dual Range High Voltage Tester
The Dual-Range Non-Contact Tester checks for the presence of voltage in overhead conductors or finds faults in cables. The LOW range detects 50V AC to 1.5kV AC. The HIGH range detects 1.5kV AC to 132kV AC. The tester indicates the presence of voltage with both audible and visual signals.
Klein Tools ET310 Digital Circuit Breaker Finder with GFCI Outlet TesterThe Klein Tools ET310 is a digital circuit breaker finder used to locate the correct circuit breaker in a panel to which an electrical outlet or fixture is connected. The Transmitter is connected to the electrical outlet or fixture in the circuit while the receiver is used to scan the breakers in the circuit panel. The Transmitter also features a GFCI outlet tester.
Klein Tools 93LDM65 Laser Distance Measurer 65 FT / 20 M
Laser Distance Measurer 65 ft.
Klein Tools Laser Distance Measurer is designed to give you easy jobsite/worksite estimating of layout and required materials. The tool accurately verifies the distance between two points and is particularly handy at distances over 30 feet, the length of the longest tape measure. The Laser Distance Measurer also offers volume estimating for HVAC installers.
Klein Tools CL900 2000A Digital Clamp Meter
2000A Digital Clamp Meter
The CL900 is an auto-ranging, true root mean square (TRMS) digital clamp meter that measures AC/DC current via the clamp and measures AC/DC voltage, resistance, continuity, frequency, duty-cycle, capacitance, and tests diodes via test-leads. It features a Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages, and has a dedicated mode for capturing Inrush Current.
Klein Tools CL450 HVAC Clamp Meter with Differential Temperature
HVAC Clamp Meter, Differential Temp
The dual display CL450 Clamp Meter is a "game changer" for the HVAC professional. This True RMS CAT IV 600V meter offers DC microamps, differential temperature, digital temperature calibration, inrush current and many other functions for HVAC applications.
Klein Tools 69409 Line Splitter 10xThe Klein Tools 69409 Line Splitter separates hot from neutral and ground wires on standard 120-Volt outlets so that current measurements can be made with a current clamp. Without the Line Splitter, the current clamp measures the load current going in both directions, effectively cancelling the measurement. The Line Splitter has a standard measurement section and ten-times multiplier section for use with less accurate or higher ranged clamp meters. It was designed for use with Klein Tools clamp meters but will also function with many other manufacturers' clamp meters.
Klein Tools IR07 Dual IR/Probe Thermometer
The Klein Tools IR07 is a dual IR (infrared) thermometer and probe thermometer. This rugged pocket thermometer measures temperature from -40 to 572-Degrees Fahrenheit (-40 to 300-Degrees Celsius) for both IR and probe measurements. The IR thermometer has a Distance-to-Spot ratio of 8:1 and the target laser can also be used as a laser pointer. The Probe accurately measures air, liquid and surface temps and has a convenient hook for hands free indoor measurements. The IR07 quickly calculates differential temperature (T1-T2) and has a backlit LCD for easy viewing in low light.
Klein Tools ET910 USB Digital Meter and Tester, USB-A (Type A)
The Klein Tools ET910 is a USB digital meter and tester combination for most common USB-A ports, including Qualcomm Quick Charge® ports. It accurately and reliably measures and displays the USB port voltage, current, capacity, energy, and resistance simultaneously. It can also test the maximum current delivery capability of the USB port with built-in fixed loads so user need not connect to an external load. It will function with any USB-A port that has the ability to deliver power. It requires NO batteries as it draws power from the power source to function.
FLUKE-52-2 60HZ Digital Thermometer, Dual Input, +/- 0.3 Deg C, +/- 0.05 Percent, 60 Hertz Noise Rejection
Laboratory accuracy. Wherever you go. The Fluke 50 Series II contact thermometers offer fast response and laboratory accuracy (0.05 percent + 0.3degrees Celsius) in a rugged, handheld test tool. A dual input thermomoeter, 60 Hz noise rejection.
Fluke FLUKE-62 MAX Infrared Thermometer, Single Laser
The Fluke 62 MAX infrared thermometers are everything you’d expect from the experts in measuring temperature in transformers, motors, pumps, panels, breakers, compressors, duct, steam lines, valves, and vents in hard to reach areas for repair and maint enance. Small in size, extremely accurate and yet easy to use . IP54 rated for dust and water resistance. Precise yet rugged enough to take a 3-meter drop.
Viavi 2330/25 MPO Quad Loss Kit With Light
The MPOLx gives technicians the ability to achieve a completely new level of productivity for MPO testing and certification. Like all Viavi solutions for Tier 1 (Basic) fiber certification, identical local and remote units are provided to enable full visibility and control by performing tests from both the Light Source and Power Meter. All devices feature a 3.5” color touch screen and integrated inspection for both bulkhead and trunk connectors. The MPOLx allows a single technician to inspect MPO end faces and perform tests from either end of the connection, reducing walking back and forth between the two units.
Viavi FI-60 Live Fiber Identifier With OPM
Innovative FI-60 Design Gives You Two Essential Fiber Tools in One Device
Inadvertently disconnecting active fiber during installation, test and troubleshooting is a common cause of dropped service. The new FI-60 LFI enables users to easily detect the optical signal without having to disconnect the fiber or disrupt network traffic. The unique Viavi Solution® SafeChekTM system ensures safe and repeatable engagement with most fiber types, without the hassle of changing out costly dies.
The FI-60 easily converts to an Optical Power Meter (OPM), providing twice the value for your investment and reducing the number of tools you have to carry on the job. Simply remove the LFI head attachment, connect the corresponding adapter (2.5 or 1.5mm) and insert a connector to measure power. This versatile tool can display, store, and recall optical power measurements for each of the selectable wavelengths. Users can download the stored data onto a PC via USB. The FI-60 also interfaces with FiberChek2, providing integrated inspection and OPM testing and reporting capabilities.
Viavi FIT-82P01-PRO Digital Fiber Inspection Kit
Digital Fiber Inspection Just Got a Whole Lot Easier
Any seasoned veteran of the industry can tell you that setting up a fiber optic network is only one small part of a much larger story. Maintaining and overseeing that network for the long haul is equally important, as this is what will make sure that the network itself is as reliable and as versatile as it needs to be for years to come. Whether you're concerned about routine maintenance or are trying to fix a major problem, your ability to succeed will ultimately rest on the quality of the tools you choose to bring with you... which is why the Viavi FIT-82P01-PRO Digital Fiber Inspection Kit is such an important addition to your existing arsenal.
Even with a quick glance, there's a lot to like about this Viavi Fiber Inspection Kit. It offers you automated (and effortless) pass/fail analysis for all fiber inspection and testing. Not only that, but you can also store ALL fiber inspection and test results on board, giving you access to comprehensive historical logs that allow you to identify trends, patterns and other opportunities for improvement that would have otherwise gone undiscovered. Truly, generating all of the fiber certification reports that you need has never been easier.
This, complete with the simple user interface and the sophisticated 3.5" color touch screen, make the Viavi Fiber Inspection Kit a worth addition to your day-to-day life. You get the peace-of-mind that only comes with knowing you can complete jobs faster, correctly and on time - the first time - all while unlocking the flexibility of a device that is suitable for use anywhere.
Note that when you order directly from FireFold, you also get access to a number of unique advantages that you aren't going to be able to find anywhere else. Not only have we gone to great lengths to guarantee a 100% safe and easy shopping experience, but you also get same day shipping in most situations. Not only that, but you can also enjoy a full lifetime warranty, a 60 day money back guarantee and fast and easy returns should the need arise. You'll also be backed by the full might of one of the best customer service teams in the business, all pointing to the fact that this is one investment that is more than worth making.
Klein Tools HVNCVT-2 Broad Range Non-Contact Voltage Tester
Klein's Broad-Range High-Voltage Non-Contact Tester detects voltage up to 230kV AC in overhead conductors. The tester indicates the presence of voltage through multiple sensitivity levels with both audible and visual signals. Attach the tester directly to a hot stick or use the universal adapter to attach it to your shotgun.