New Products

VERTICAL CABLE 214-2360s SERIES – OSDP CABLE

The OSDP plenum Cable is a high-performance cable designed for plenum-rated security, control, speaker and motion sensor applications. Built with multiple shielded and unshielded components, this low-voltage cable ensures reliable two-way data transmission, device supervision, and secure encrypted connectivity between access control panels and readers.

APPLICATIONS

The OSDP Cable is engineered for multi-function access and control systems, including:

• Security Panels 
  
• Card Readers and Keypad Circuits
  
• Door Contact Sensors and Power Locks
  
• Alarm Triggers and REX Motion Sensors
  
• Microphones, Audio Paging, and Speakers

Installers choose the 214-2360s Series for efficiency, performance, and compliance:

1. Four Cables in One: Reduces installation time and material clutter.
   
2. Shielded and Unshielded in One Run: Perfect for signal integrity and noise isolation.
   
3. Pre-Marked Components: Eliminates guesswork during installation.
   
4. Plenum Rated Safety: Approved for use in plenum ceilings and HVAC spaces.
   
5. Trusted by Pros: Meets electrical, mechanical, and environmental standards across multiple industries.

Universal Fiber Optic Cleaning Cassette for MPO, MTP, SC, ST, FC, LC, MU Connectors

The Optix America universal fiber optic connector cleaning cassette is designed for compatibility with all major connector types, including MPO, MTP, SC, ST, FC, LC, and MU. Each cassette delivers over 500 cleaning cycles, ensuring long lasting performance in the field. Its densely woven microfiber cleaning ribbon rotates 180° with each use, providing a full sweep of the connector end face and achieving cleanliness levels of 97% or higher. The cassette also features excellent anti-static properties to help prevent dust from reattaching to the ferrule after cleaning.

1.25mm Cleaning Stick for LC, MU connector end face (50 pack)

Optix America Cleaning Sticks are reliable, cost effective tools engineered for the critical cleaning of fiber optic connector end faces. Featuring a dry, alcohol-free cloth tip, these sticks can be used alone or with cleaning fluid to thoroughly clean the entire end face. Precision-molded to exact specifications, they are available for both 2.5mm (SC, ST, FC) and 1.25mm (LC,MU) connectors. These color-coded sticks provide high-purity cleaning without the use of fabrics, foam, glues, or particulates. They are ideal for cleaning ferrule end faces in tight spaces, such as patch panels and adapters, as well as contact areas within high-speed fiber optic network receptacles.

2.5mm Cleaning Stick for SC, ST, FC Connector End Face (50 pack)

Optix America Cleaning Sticks are reliable, cost effective tools engineered for the critical cleaning of fiber optic connector end faces. Featuring a dry, alcohol-free cloth tip, these sticks can be used alone or with cleaning fluid to thoroughly clean the entire end face. Precision-molded to exact specifications, they are available for both 2.5mm (SC, ST, FC) and 1.25mm (LC,MU) connectors. These color-coded sticks provide high-purity cleaning without the use of fabrics, foam, glues, or particulates. They are ideal for cleaning ferrule end faces in tight spaces, such as patch panels and adapters, as well as contact areas within high-speed fiber optic network receptacles.

2"x 2" Lint Free, Non-abrasive Fiber Optic Wipes - 150 Pack

Our lint-free, non-abrasive wipes provide superior cleaning for optical surfaces, fiber cables, and connector end faces without the risk of scratching or leaving residue. Made from a high-strength 45/55 cellulose/polyester blend, these hydro-entangled dry wipes offer excellent absorbency and contamination entrapment. They are available in a standard 4"x4" size (100 per pack) or an economical 2"x2" size (150 per pack).

4"x 4" Lint Free, Non-abrasive Fiber Optic Wipes - 100 Pack

Our lint-free, non-abrasive wipes provide superior cleaning for optical surfaces, fiber cables, and connector end faces without the risk of scratching or leaving residue. Made from a high-strength 45/55 cellulose/polyester blend, these hydro-entangled dry wipes offer excellent absorbency and contamination entrapment. They are available in a standard 4"x4" size (100 per pack) or an economical 2"x2" size (150 per pack).

Splicer V-Groove Cleaning Kit

Dust, dirt, and fiber coating debris will eventually find their way to the surface of the fusion spicer v-groove and this contamination will offset the fibers and degrade performance. To solve these cleaning needs, Optix America has combined its recommended fusion splicer v-groove cleaning products into a single kit for effortless convenience. This kit includes the highest quality tools into an affordable and effective inspection and cleaning solution for any fusion splicer. The specialized v-groove cleaning pen offers bristles that can be extended to the optimal length and hardness simply by twisting the cap and spent bristles can be cut off for fresh ones.

Fiber Optic Connector Cleaning Kit

The Optix America Fiber Optic Connector Cleaning Kit is a comprehensive, field-ready solution designed to ensure optimal performance and reliability of fiber optic networks. Engineered for technicians and installers, this all-in-one kit provides the essential tools required to effectively clean and inspect LC, SC, ST, and FC connector endfaces. By removing dust, oil, and other contaminants, the kit helps reduce signal loss, prevent damage, and maintain peak network efficiency. Built for convenience and precision, the kit includes a high-magnification handheld fiber microscope, a high-capacity cleaning cassette, multiple cleaning pens and sticks for different connector sizes, and lint-free wipes paired with cleaning fluid for thorough endface preparation. Housed in a durable soft case for easy transport and organization, the Optix America cleaning kit is an indispensable solution for both field service and installation environments

Fiber Optic Inspection Probe Kit

The OPTIX America FIP-82 handheld fiber optic inspection probe is a portable video microscope used to examine installed fiber terminations and verify that they are smooth and clean. With the appropriate adapters, it can inspect virtually any type of fiber optic termination. This kit includes six precision adapter tips for multimode and singlemode fiber end-face analysis, which attach easily to the end of the probe. Additional adapter tips are available for other termination types. The monitor provides a 3.5" high-precision LCD display that delivers real-time, high-resolution images of the connector end face at 250x magnification with no latency. The monitor and probe feature intuitive controls for image focus, brightness level and battery indicator. A protective elastomeric shell surrounds the monitor to guard against drops.

Wet/Dry QuickCleans2

Fiber Optic Wet/Dry QuickCleans2 offer a faster way to clean fiber cables while protecting technicians from skin irritation caused by repeated exposure to isopropyl alcohol (IPA) and other agents. The QuickCleans2 utilizes a spring loaded tweezer style design that makes cleaning fiber simple and fast. The cleaning pads are made from a non-woven, high-density, hydro-entangled 45/55 cellulose/polyester blend, ensuring optimal purity and excellent absorbency. Each pad is designed to last a minimum of 200 uses.The QuickCleans2 package includes a fiber cleaning tool, ten cleaning pads, and a 50ml fluid dispenser bottle.

WiFi Inspection Probe with Rechargeable Battery

The Optix America WiFi Fiber Optic Inspection Probe is a portable inspection system that pairs seamlessly with iOS and Android smart devices, enabling fast and accurate analysis of fiber optic connector end-face cleanliness. With a single press of a button, the probe captures, centers, and evaluates the end-face image based on user-defined criteria, streamlining the inspection process. Equipped with a high-definition CCD camera and precision optics, the probe delivers sharp, detailed images directly to a mobile device. Users can magnify images up to 200×, capture photos, and record inspection results for documentation and analysis. The system includes six interchangeable adapter tips to support a wide range of fiber inspection applications. Additional optional tips are available, including configurations for MPO/APC female and MPO/UPC female connectors.The WIFI-P8 inspection kit comes complete with a WiFi-enabled inspection probe featuring a rechargeable battery, six precision adapter tips, power adapter, user guide, and a protective soft carrying case.

Fiber Optic Wet/Dry QuickCleans - 10 Pack

The OPTIX Fiber Optic Wet/Dry QuickCleans offer a faster way to clean fiber cables while protecting technicians from skin irritation caused by repeated exposure to isopropyl alcohol (IPA) and other agents. The tweezer-style design features lint-free pads for superior cleaning and a loop tie-down to prevent loss. Made from a high-density cellulose/polyester blend for maximum purity, these tools are compatible with any professional fluid pump dispenser. Each QuickClean is highly absorbent and tested for over 100 uses. QuickCleans are available in packages of ten.

10mW Visual Fault Locator, Battery Operated

The Optix VFL-10 is a 10mW visual fault locator equipped with a 650nm visible laser diode that delivers clear and precise fault location while supporting both continuous wave (CW) and 2Hz modulation modes for versatile operation. Its rugged construction features a reinforced end design to protect the laser tip from damage if dropped, ensuring long-term durability. The device maintains stable power output even under low battery conditions for consistent performance in the field. It includes a 2.5mm universal adapter compatible with SC, FC, and ST connectors, along with a 1.25mm LC/MU adapter for added flexibility. A soft carrying case is provided for easy transport and storage, while a protective dust cap offers additional safeguarding of the laser interface.

10mW Visual Fault Locator, Rechargeable Li-ion Battery

The OPTIX Visual Fault Locator features a rechargeable 700mAh Li-ion battery and delivers a 10mW power output using a 650nm visible laser diode. It supports both continuous wave (CW) and 2Hz modulation modes, ensuring versatile operation, while maintaining stable power output even at low battery levels. The unit is equipped with a 2.5mm universal adapter and includes an additional 1.25mm adapter. A USB-C charger is provided for convenient recharging. It is built with a specially designed end to help prevent damage to the laser, along with a protective cap for added durability.

Visual Fault Locator for MPO Fiber

As demand for MPO fiber optic cabling continues to grow, OPTIX America is proud to introduce the MPO Visual Fault Locator — an essential troubleshooting tool for continuity verification and macro-bend detection in MPO optical systems. Rugged, weather-resistant, and shock-resistant, this unit delivers 10mW of output power and is available in 12,16, or 24 channel configurations. Transition cables are also available in 24 to 16, 24 to 12, and 16 to12 fiber configurations, ensuring compatibility across a range of setups. The MPO Visual Fault Locator works with both singlemode and multimode fiber and is powered by a rechargeable 5V lithium battery with USB Type-C charging for fast, convenient charging in the field.

Mini Optical Fiber Identifier for 250µm, 900µm, 2mm, and 3mm

The OPTIX America mini optical fiber identifier features a compact, convenient design ideal for field use. It accurately detects attenuation, signal direction, and approximate optical power through macrobending measurement on 250µm, 900µm, 2mm, and 3mm diameter fiber cables. The unit supports tone identification at fixed frequencies of 270Hz, 1kHz, and 2 kHz, and detects both the direction and intensity of optical signals with insertion loss of less than 1dB at 1310nm and 1550nm. A bell-shaped groove fiber clamp ensures low insertion loss while preventing damage to the fiber. The identifier is powered by a built-in 500mAh lithium battery that provides up to 24 hours of operation and recharges conveniently via a Type-C interface. A universal adapter accommodates multiple fiber diameters without the need to change blocks, and the unit is supplied with a protective soft carrying case.

Optical Fiber Identifier

The Optix America OFI-28 Optical Fiber Identifier with integrated VFL and Optical Power Meter utilizes advanced macro-bending technology to perform non-destructive live fiber detection. It enables users to identify signal presence, direction, and relative power levels at any point along singlemode or multimode fibers, supporting cable diameters of 250µm, 900µm, 2mm, and 3mm. The universal adapter design accommodates multiple fiber sizes without the need to change clamp blocks, improving efficiency in the field.

Equipped with a built-in 10mW Visual Fault Locator (VFL) and optical power meter, the OFI-28 allows for quick fault location and accurate optical power measurement on the tested fiber. Additionally, the unit features a low battery monitoring function that alerts users when battery replacement is required, ensuring reliable operation during critical tasks.

SM+MM Optical Light Source

The WRX281 Optical Light Source is a precision fiber optic test instrument designed for fiber link continuity verification, fault diagnosis, and insertion loss testing. Supporting multimode and singlemode operation at 850nm, 1300nm, 1310nm, and 1550nm wavelengths, it features adjustable optical output power up to 6 dB, continuous wave and modulated output modes, automatic power-off, wavelength memory, and a backlit LCD display. Powered by a 1500 mAh rechargeable lithium battery, it provides up to 24 hours of operation and includes a universal 2.5 mm interface with a 1.25 mm adapter. When used with the WRX280 Optical Power Meter, it enables accurate bidirectional loss and continuity testing of optical fiber links.

Optical Power Meter

The WRX280 Optical Power Meter with integrated 10mW Visual Fault Locator (VFL) and cable tracker is designed for continuous optical signal power measurement, fiber optic link loss testing, and fiber continuity verification. Controlled by a single-chip processor, it supports measurements at 10 standard wavelengths and provides frequency recognition, wavelength recognition, user calibration, wavelength memory, automatic shutdown, and backlight display functions. The built-in 10mW VFL offers CW, 1Hz, and 2Hz operating modes for efficient fiber identification and troubleshooting. The unit features a rechargeable 700mAh lithium battery for extended operation and includes a universal 2.5mm SC/ST/FC interface, along with a 1.25mm LC adapter for added versatility.

OLTS Fiber Test Kit

The OPTIX Fiber Link Test Kit is the comprehensive, all-in-one solution for testing and qualifying optical links, as well as verifying fiber cables before deployment. Combining an Optical Power Meter and Optical Light Source, it enables fast, accurate troubleshooting of both single-mode and multimode fibers across four key wavelengths - 850, 1300, 1310, and 1550 nm. It simplifies optical power loss measurements and supports storage of up to 500 test records with seamless PC software export. The complete kit includes SC and LC adapters, reference cords, bare fiber adapters, a scribe tool, a visual fault locator, connector cleaning pens, and a rugged carrying case - ensuring reliable and efficient field testing.

G657A1 Single Mode Launch Cord

Optix America fiber optic launch cords are engineered with bend-insensitive fiber and feature steel, interlocked armor beneath the jacket for crush-proof protection. Designed for durability and ease of use, the compact housing includes a shoulder strap for portability and a convenient magnet on the base for quick mounting to metal fiber racks. To ensure efficient organization, our housings are color-coded by fiber and polishing type for each connector, allowing for rapid identification. These launch cables are an ideal solution for eliminating dead zones during reflectometric testing with an OTDR.

OM4 Multimode Launch Cord - 100 meters

Optix America fiber optic launch cords are engineered with bend-insensitive fiber and feature steel, interlocked armor beneath the jacket for crush-proof protection. Designed for durability and ease of use, the compact housing includes a shoulder strap for portability and a convenient magnet on the base for quick mounting to metal fiber racks. To ensure efficient organization, our housings are color-coded by fiber and polishing type for each connector, allowing for rapid identification. These launch cables are an ideal solution for eliminating dead zones during reflectometric testing with an OTDR.

WRX1000H Handheld OTDR Singlemode

The WRX1000H series handheld optical time domain reflectometer (OTDR) offers precise measurement of fiber length, splice loss, and the location of fiber faults. It features a 3.5-inch capacitive touch screen and integrates multiple functions, including OTDR, event map, OPM, LS, VFL, RJ45 sequence test, optical loss test, and flashlight. The touchscreen allows for simple and efficient operation through single parameter setting and intelligent measurement. Key specifications of the WRX1000H include a dynamic range of 24dB or 22dB, an event dead zone of less than 2.5m, and an attenuation dead zone of less than 8.0m, ensuring accuracy and reliability in field use. With a high sampling rate of 128k, it can detect defects as small as 1 meter. It supports external USB storage, capable of storing up to 1000 test curves, and is equipped with a 4000mAh high-density lithium battery that provides up to ten hours of testing time and twenty hours of standby time with intelligent power saving management. Additionally, the filter model supports online testing with a maximum online power of -2dB.

WRX3000 OTDR Singlemode

The WRX3000 series optical time domain reflectometer (OTDR) adopts a 4.3 inch capacitive touch screen and integrates twelve functions including auto OTDR, expert OTDR, event map, OPM, RJ45 cable tracker, and “computer level” file management to meet various test requirements. The OTDR has a maximum dynamic range of 26dB, 8G memory, and can store more than 200,000 curves. It is also equipped with a 4000mAh high density polymer lithium battery with intelligent power saving management providing up to twelve hours testing time.

The WRX3000 series is used to measure the length, loss, and connection quality of optical fiber used in engineering construction, line maintenance & testing, emergency repair, and the development and production of optical fiber cables.

WRX5000 OTDR Singlemode + Multimode

The WRX5000 series single mode + multi mode optical time domain reflectometer (OTDR) is the new generation of intelligent tester for the detection of fiber communications systems and optical network construction for outstanding performance and is specially designed for long haul application. This specially designed unit offers a seven inch capacitive touch screen which integrates nine modules. It has excellent accuracy of short fiber test and automatic test and is equipped with a rich ethernet test (Ping/PPOE, etc) and supports APP control. The WRX5000 series is used to measure the length, loss, and connection quality of optical fiber used in engineering construction, line maintenance & testing, emergency repair, and the development and production of optical fiber cables.

Basic Workstation

The OPTIX Splicing Workstation is a heavy duty, portable table designed for fiber optic professionals to perform field splicing. It is characterized by its stability and specialized cable management features. The workstation has a total work surface area of approximately 35” x 22” and a compact fold?up design to make it easy to transport. The total weight with the stand and bracket is about 17.6 lbs, and the unit supports up to 100 lbs of equipment. Core features include versatile mounting as a freestanding table, hung over terminal casings using stand-off props, or attached directly to aerial cable support strands. It also offers adjustable table height, a unique cable management bracket that attaches to either side of the workbench to secure fiber cables, and molded slots for holding fiber splicing sleeves, alcohol dispensers, and other tools. The workstation is typically offered in three configurations - Basic, Professional, and Deluxe - to match different field requirements.

Professional Splicing Workstation

The OPTIX Splicing Workstation is a heavy duty, portable table designed for fiber optic professionals to perform field splicing. It is characterized by its stability and specialized cable management features. The workstation has a total work surface area of approximately 35” x 22” and a compact fold?up design to make it easy to transport. The total weight with the stand and bracket is about 17.6 lbs, and the unit supports up to 100 lbs of equipment. Core features include versatile mounting as a freestanding table, hung over terminal casings using stand-off props, or attached directly to aerial cable support strands. It also offers adjustable table height, a unique cable management bracket that attaches to either side of the workbench to secure fiber cables, and molded slots for holding fiber splicing sleeves, alcohol dispensers, and other tools. The workstation is typically offered in three configurations - Basic, Professional, and Deluxe - to match different field requirements.

Deluxe Splicing Workstation

The OPTIX Splicing Workstation is a heavy duty, portable table designed for fiber optic professionals to perform field splicing. It is characterized by its stability and specialized cable management features. The workstation has a total work surface area of approximately 35” x 22” and a compact fold?up design to make it easy to transport. The total weight with the stand and bracket is about 17.6 lbs, and the unit supports up to 100 lbs of equipment. Core features include versatile mounting as a freestanding table, hung over terminal casings using stand-off props, or attached directly to aerial cable support strands. It also offers adjustable table height, a unique cable management bracket that attaches to either side of the workbench to secure fiber cables, and molded slots for holding fiber splicing sleeves, alcohol dispensers, and other tools. The workstation is typically offered in three configurations - Basic, Professional, and Deluxe - to match different field requirements.

Jackknife Fiber Cable Prep Tool

The OPTIX multi-functional Jackknife tool is an all-in-one preparation tool primarily recognized for its compact design, patented multi-functionality, and durability in the field. It is designed to streamline fiber termination by integrating nine separate tools into one compact device. Its nine functions cover the entire cable preparation workflow, from outer jacket removal to final cleaning. By combining Kevlar scissors, tri-hole strippers, 2mm and 3mm drop cable strippers, ruler for measuring cleave strip lengths, wire pliers, and lint-free wipes, this high-quality tool saves time and eliminates the need to carry multiple individual devices.

6N1 Fiber Prep Tool

Introducing the Sniper 6N1 fiber optic prep tool, engineered to enhance efficiency for professional fiber optic installers. Featuring a patented five-port design that delivers six essential functions in one compact tool, it streamlines the preparation process by combining a 3mm/2mm cable jacket stripper, 900µm buffer stripper, 250µm coating stripper, integrated Kevlar scissors for cutting aramid yarn, a drop cable jacket stripper, and a metal wire cutter for drop cable applications.

Drop Proof Precision Cleaver with Three Blades

The WRXD30 drop-proof precision cleaver delivers high precision fiber cleaving for 250µm, 900µm, 2mm, and 3mm single fiber applications. It is the only precision cleaver engineered to withstand drop tests of up to 30 feet (10 meters), making it ideal for demanding field environments. The patented magnetic levitation blade design is self-adjusting, eliminating the need for blade height adjustments or blade rotation. Each blade provides up to 3,500 cleaves before disposal, and blade replacement takes less than one minute. Five blades are included with every package. Small and lightweight, the WRXD30 maximizes work efficiency with simple two-step operation and automatic blade reset for fast, consistent performance.

Two-step Precision Cleaver with Automatic Rotating Blade & Automatic Bin

Introducing the WRXK9A precision cleaver with automatic blade rotation and integrated automatic waste bin, designed to deliver high-precision fiber cleaving for 250µm, 900µm, 2mm, and 3mm single fiber and ribbon fiber cable. Compatibility with industry-standard removable fiber holders provides added versatility. The blade automatically rotates after each cleave to ensure consistent performance and extended service life, providing up to 52,000 cleaves before replacement is required. An integrated automatic waste bin collects fiber scraps during operation, helping maintain a clean work area. The WRXK9A offers accurate cleave lengths from 5mm to 20mm, making it an efficient and reliable solution for splicing applications.

One-Step Precision Cleaver for Single & Ribbon Fiber with Bin

The WRXK1S true one-step precision cleaver made of rugged metal housing with integrated waste bin delivers high precision fiber cleaving for 250μm, 900μm, 2mm, and 3mm single fiber cable, and ribbon cable. Designed to maximize work efficiency, the WRXK1S features a simple and ergonomic one-step operation with automatic blade reset to the start position. Simply press the anvil once to cleave. The WRXK1S is also compatible with industry-standard removable fiber holders for added versatility. Its tungsten steel cleaver blade features sixteen blade positions and provides up to 48,000 fiber cleaves for long-lasting performance and reliability.

Mini One-Step Handheld Precision Cleaver for Single & Ribbon Fiber with Bin

The WRXK1S mini one-step precision cleaver with integrated waste bin provides high-precision cleaving for 250µm, 900µm, 2mm, and 3mm single fiber, as well as ribbon cable. Compact and lightweight, a simple one-step operation delivers a consistent 90° ± 0.5° cleave angle, while the blade automatically resets after each cleave for increased efficiency. Constructed from high-hardness tungsten steel, the blade offers 24 usable positions for extended service life. Blade rotation is quick with a simple slide button, while an easily accessible adjustment screw allows for precise blade height adjustments.

Two-Step Precision Cleaver for Single Ribbon Fiber with Bin

Introducing the WRXCL10 precision cleaver featuring a removable scrap bin and delivering high-precision fiber cleaving for 250µm, 900µm, 2mm, 3mm, and ribbon fiber cable. Designed to maximize work efficiency, the WRXCL10 offers a simple two-step operation with automatic blade reset for fast and consistent performance in the field. The universal adapter plate supports all standard single-fiber applications and the cleaver is also compatible with industry-standard removable fiber holders. With sixteen blade positions, the WRXCL10 provides up to 48,000 fiber cleaves while allowing quick and easy blade adjustment and replacement for extended service life.

One Step Thermal Stripper for Single & Ribbon Fiber

The WRXTS6 handheld thermal stripper is specifically designed for the non-destructive thermal stripping of single and ribbon fiber cable. This tool makes stripping fiber cable quick and efficient. Features include eight temperature levels, rechargeable lithium battery that provides up to 600 continuous stripping cycles, and compatibility with industry-standard fiber holders. The complete kit includes the WRXTS6 thermal stripper, carrying case, AC adapter, and cleaning brush.

External Fusion Splicer Heater

The Optix America external fusion splicer heater is designed to heat splice sleeves efficiently and save time for professional technicians. Made of premium alloy, this small and lightweight device is compatible with all sizes of splice protection sleeves, including LC and SC splice-on connectors. Heating is automatic and activated upon detection of fiber cable and includes four temperature modes. The rechargeable lithium-ion battery provides over 200 heating cycles per charge.

Optix America Thermal Stripper for Single & Ribbon Fiber

Introducing the WRXTS1 one-step thermal stripper from OPTIX America designed for quick thermal stripping of 250µm/900µm single fiber and ribbon fiber. The one-step process and the new wide blade design enables multiple fibers to be stripped at once including up to twelve 900µm single fibers and up to twenty four 250µm single fibers. It comes complete with eight temperature settings in heat and save mode. The rechargeable lithium-ion battery provides up to 200 cycles of continuous stripping and can be used while charging. Package includes thermal stripper, AC adapter charger, USB charger, cleaning brush and carrying case.

GRIPTITE Holders for Tight Buffered Cable - WRX600 and WRX400

Quicker and faster fiber cable stripping for 900um and 250um is now available! The GRIPTITE fiber holders patented holding technology grips the cable tighter than other fiber holders, saving steps in the stripping process for the fiber optic professional. Our two step process includes inserting the fiber holder into the thermal stripper and pulling it out. It's that Simple! No need to shut and squeeze the thermal stripper cover, just pull and strip. This process is easier and saves time. Proprietary holder system included with the WRX600 core alignment and WRX400 clad alignment fusion splicer.

WRX400H Handheld Clad Alignment Splicer Kit with 3-Pack Fast Track Calibration

The WRX400H handheld active clad fusion splicer is ideal for FTTX/FTTH splicing projects. Small, lightweight, and dependable - it is the perfect splicer for techs on the go as it can be easily operated while still in the hard case. Stable performance provided even in harsh environments. Dual touchscreen and keypad operation provided.

WRX400H Handheld Clad Alignment Splicer Kit

The WRX400H handheld active clad fusion splicer is ideal for FTTX/FTTH splicing projects. Small, lightweight, and dependable - it is the perfect splicer for techs on the go as it can be easily operated while still in the hard case. Stable performance provided even in harsh environments. Dual touchscreen and keypad operation provided.

WRX12R Ribbon Splicer Kit plus 3-Pack Fast Track Calibrations

The Optix America WRX12R ribbon fusion splicer provides dependable splicing for both ribbon and single fiber optic cables, including 250um rollable ribbon fiber. This rugged and durable unit has an IP52 Ingress Protection Rating. Featuring SMART arc control technology, the WRX12R automatically adjusts the arc value based on the number of fibers being spliced and the quality of the fiber cleaves. It also utilizes PAS LED technology for fiber alignment, eliminating the need for mirror adjustments and cleaning. The complete kit includes a precision cleaver, thermal stripper, 12f fiber holders, optional 250um or 900um single fiber holders, V-groove cleaning tools, and an 840mAH high-capacity battery that provides over 240 splicing and heat cycles. Guaranteed stability and splicing performance under most environmental conditions, the WRX12R ribbon fusion splicer will be your trusted tool in the field. Standard features include automatic arc calibration, fast heating, low loss, 13s splice time, force arc, 100X magnification, reverse monitor, GPS tracking, and quick splice mode.

WRX12R Ribbon Splicer Kit - Includes Precision Cleaver, Thermal Stripper, 12f Holders

The Optix America WRX12R ribbon fusion splicer provides dependable splicing for both ribbon and single fiber optic cables, including 250um rollable ribbon fiber. This rugged and durable unit has an IP52 Ingress Protection Rating. Featuring SMART arc control technology, the WRX12R automatically adjusts the arc value based on the number of fibers being spliced and the quality of the fiber cleaves. It also utilizes PAS LED technology for fiber alignment, eliminating the need for mirror adjustments and cleaning. The complete kit includes a precision cleaver, thermal stripper, 12f fiber holders, optional 250um or 900um single fiber holders, V-groove cleaning tools, and an 840mAH high-capacity battery that provides over 240 splicing and heat cycles. Guaranteed stability and splicing performance under most environmental conditions, the WRX12R ribbon fusion splicer will be your trusted tool in the field. Standard features include automatic arc calibration, fast heating, low loss, 13s splice time, force arc, 100X magnification, reverse monitor, GPS tracking, and quick splice mode.

WRX400 Core Alignment Splicer Kit with WRXK1S Mini One-Step Cleaver

The WRX400 stands out as the most rugged four motor clad fusion splicer on the market, boasting an IP52 Ingress Protection Rating and engineered to maintain consistent stability and splicing performance across a wide range of environmental conditions, ensuring it remains a dependable tool for field operations. Each unit is delivered as a comprehensive kit, which includes your choice of precision WRX cleaver, WRXTS1 thermal stripper, GRIPTITE 900μm and 250μm holders, 900μm loose tube cable clamp for splicing loose tube cable, and cleaning and prep tools. Key features include automatic arc calibration, sustained heating, force arc, flip screen, and quick splice mode.

WRX400 Clad Alignment Splicer Kit with WRXK1S One-Step Cleaver

The WRX400 stands out as the most rugged four motor clad fusion splicer on the market, boasting an IP52 Ingress Protection Rating and engineered to maintain consistent stability and splicing performance across a wide range of environmental conditions, ensuring it remains a dependable tool for field operations. Each unit is delivered as a comprehensive kit, which includes your choice of precision WRX cleaver, WRXTS1 thermal stripper, GRIPTITE 900μm and 250μm holders, 900μm loose tube cable clamp for splicing loose tube cable, and cleaning and prep tools. Key features include automatic arc calibration, sustained heating, force arc, flip screen, and quick splice mode.

WRX400 Clad Alignment Splicer Kit with WRXK9A Auto Cleaver

The WRX400 stands out as the most rugged four motor clad fusion splicer on the market, boasting an IP52 Ingress Protection Rating and engineered to maintain consistent stability and splicing performance across a wide range of environmental conditions, ensuring it remains a dependable tool for field operations. Each unit is delivered as a comprehensive kit, which includes your choice of precision WRX cleaver, WRXTS1 thermal stripper, GRIPTITE 900μm and 250μm holders, 900μm loose tube cable clamp for splicing loose tube cable, and cleaning and prep tools. Key features include automatic arc calibration, sustained heating, force arc, flip screen, and quick splice mode.

WRX400 Clad Alignment Splicer Kit with WRXCL10 Cleaver

The WRX400 stands out as the most rugged four motor clad fusion splicer on the market, boasting an IP52 Ingress Protection Rating and engineered to maintain consistent stability and splicing performance across a wide range of environmental conditions, ensuring it remains a dependable tool for field operations. Each unit is delivered as a comprehensive kit, which includes your choice of precision WRX cleaver, WRXTS1 thermal stripper, GRIPTITE 900μm and 250μm holders, 900μm loose tube cable clamp for splicing loose tube cable, and cleaning and prep tools. Key features include automatic arc calibration, sustained heating, force arc, flip screen, and quick splice mode.

WRX600 Core Alignment Splicer Kit with WRXK1S Mini One-Step Cleaver

The WRX600 stands out as the most rugged six motor core fusion splicer on the market, boasting an IP52 Ingress Protection Rating and engineered to maintain consistent stability and splicing performance across a wide range of environmental conditions, ensuring it remains a dependable tool for field operations. Each unit is delivered as a comprehensive kit, which includes your choice of precision WRX cleaver, WRXTS1 thermal stripper, GRIPTITE 900μm and 250μm holders, 900μm loose tube cable clamp for splicing loose tube cable, and cleaning and prep tools. Key features include automatic arc calibration, sustained heating, force arc, flip screen, and quick splice mode.