Under $25

Garvin WBF-1 Low Volt Box Eliminator Ring

Help Eliminate Gangs

Limited wall room but need a wall plate? This product will eliminate the large gang box, allowing you to insert into any wall.

Saves Space

With the elimination of a standard gang box, you will be able to work with a deal more room. The blue (gang) box also makes cable management a hassle as thick, inflexible wire won't want to go back in properly. This leads to awkward angles that cause wear and tear and even a distortion in signal. Not all walls can support a regular gang box, and if you need an outlet in that particular place then you are essentially out of luck--unless of course you have one of these.

LVH1 Bracket

Mount your wall plates vertically or horizontally with Arlington’s LVH1. These non-metallic brackets are ideal for any Class 2 low voltage cable run including AV and networking applications. Designed for new construction, they attach easily to any standard wood or metal stud. With three mounting hole options, these brackets can be oriented in nearly any position with a minimum of adjustment and no increase in installation time. Sturdy side tabs also help stabilize the bracket against the stud, allowing for a secure assembly.

The LVH1 is compatible with any single gang low voltage wall plate including bulk pass-through, keystone, and even decora-style faceplates. They include a molded tie-off slot for your pre-wiring cabling runs. This bracket is for use with low voltage wiring only and is not compatible with electrical runs.

Vanco WP-2P-BIND Binding Post Wall Plate

Down to the Wire

The reason wireless speakers have swooped onto the scene is obvious. Unfortunately, wireless systems can be impractical for many reasons or just plain expensive. Wrestling with speaker wire can be the most imposing part of setting up a home theater surround system. You don’t have to be tackling an extensive 7.1 set-up to be faced with the question of where the cables should go and how they should be connected. Let us ease your mind. It isn’t as complicated as it seems and you certainly don’t have to be stuck with the world’s largest cord mound right in the middle of your living room.

Connect the Dots

Vanco’s WP-2P-BIND binding post wall plate helps you banish the mess by providing an easy, attractive interface for running your wires through the wall. Binding posts, like spring clips, are one style of connecting speaker wire to a device, source, or jack. They use a red and black color to identify the positive and negative terminals. They are mainly used with banana plugs but most, like these, can also be connected to bare wire. They can easily fit speaker wire up to 12 AWG and they do not require any type of soldering for a secure connection. The gold-plated connectors help pass along the seamless, quality sound.

Each speaker requires one red and one black connection, so this wall plate is compatible with two speakers. Installing and connecting the WP-2P-BIND is straightforward and quick. The wall plate can attach directly to a single gang box or low voltage bracket, but the décor insert can also be removed and swapped into a larger or pre-existing décor faceplate. This gives you nearly endless possibilities for customization and opens the door for hassle-free expansion or upgrades in the future.

Vanco 28146W Binding Post Decor Wall Plate

Down to the Wire

The reason wireless speakers have swooped onto the scene is obvious. Unfortunately, wireless systems can be impractical for many reasons or just plain expensive. Wrestling with speaker wire can be the most imposing part of setting up a home theater surround system. You don’t have to be tackling an extensive 7.1 set-up to be faced with the question of where the cables should go and how they should be connected. Let us ease your mind. It isn’t as complicated as it seems and you certainly don’t have to be stuck with the world’s largest cord mound right in the middle of your living room.

Connect the Dots

Vanco’s WP-1P-BIND binding post wall plate helps you banish the mess by providing an easy, attractive interface for running your wires through the wall. Binding posts, like spring clips, are one style of connecting speaker wire to a device, source, or jack. They use a red and a black color to identify the positive and negative terminals. They are mainly used with banana plugs but most, like these, can also be connected to a bare wire. They can easily fit speaker wire up to 12 AWG and they do not require any type of soldering for a secure connection. The gold-plated connectors help pass along seamless, quality sound.

Each speaker requires one red and one black connection, so this wall plate is compatible with a single speaker. Installing and connecting the WP-1P-BIND is straightforward and quick. The wall plate can attach directly to a single gang box or low voltage bracket, but the décor insert can also be removed and swapped into a larger or pre-existing décor face plate. This gives you nearly endless possibilities for customization and opens the door for hassle-free expansion or upgrades in the future.

Vanco F Port Keystone Plate Insert

This keystone insert fits into any Decora-style wall plate for a stylish, professional look.

Houses your networking and home theater connectors to keep you organized.

Slim Line Standard HDMI Pigtail Wall Plate

The standard HDMI wall plate with pigtail is a white decor style rectangular covering for a wall. It has 2 HDMI ports connected by a short cable. The port contacts are gold plated to resist corrosion and degradation. With a screw at the top and another at the bottom, this wall plate is installed the standard way.

This wall plate will help you organize and extend your HDMI devices. Running cables through the wall is one of the most common ways installers create their gorgeous and functional setups. There is one problem with most wall plates, however, and that is the angle of their HDMI port on the back. A pass-thru port will cause wear and tear to the connector of your HDMI cable if not angled in a way to reduce stress, the pigtail will remove this concern. With a flexible pigtail, you can angle your cable in a way that best serves your needs. Just like other HDMI wall plates, crystal clear, high-resolution signals are supported and audio and video is transmitted.

3 RGB Component Wall Plate

Vanco 2 Gang Blank Wall Plate

Into the Void

When it comes to home improvements, the sad- and sometimes frustrating- truth is that nothing is ever permanent. Floor plans shift, technology is updated, and tastes change. Regardless of whether your project has just started, just finished, or is stuck somewhere in between, maintaining a professional appearance is just as important as making life easier for yourself in the future. Wiring your home can be a messy project and it often leaves you with plenty of holes to cover. You’ve probably seen blank wall plates before and many people wonder what they are for. Wall plates are most often used to plug into in-wall wiring, but blank plates don’t have any openings. Why use one?

Fill in the Blank

Blank wall plates like FireFold’s WP-0-2GANG are used to cover the site of an old, unused connection, the site of a potential connection, or just the site of a hole left by construction. When time, effort, or future use is in question, blank wall plates provide an easy, inexpensive alternative to patching drywall. They create a clean, intentional look while keeping debris out of your stud bays. Which blank wall plate you need depends on your current décor and how large an opening you have to cover.

The WP-0-2GANG White Blank Plate is a white four-hole two-gang plate. Molded from UL listed impact resistant thermoplastic, this high-quality wall plate is solid and durable. It comes with four color-matched screws and fits over any standard two-gang box or bracket. The smooth, glossy finish matches most wall plates and the beveled edges keep the WP-0-2GANG low-profile and inconspicuous. Installing this plate over an existing box takes seconds and requires only a screwdriver. Replacing it later with another double-gang wall plate is just as simple. With a lifetime warranty, you can expect this blank plate to last through endless projects.

White Blank Wall Plate

Into the Void

When it comes to home improvements, the sad- and sometimes frustrating- truth is that nothing is ever permanent. Floor plans shift, technology is updated, and tastes change. Regardless of whether your project has just started, just finished, or is stuck somewhere in between, maintaining a professional appearance is just as important as making life easier for yourself in the future. Wiring your home can be a messy project and it often leaves you with plenty of holes to cover. You’ve probably seen blank wall plates before and many people wonder what they are for. Wall plates are most often used to plug into in-wall wiring, but blank plates don’t have any openings. Why use one?

Fill in the Blank

Blank wall plates like FireFold’s WP-0 are used to cover the site of an old, unused connection, the site of a potential connection, or just the site of a hole left by construction. When time, effort, or future use is in question, blank wall plates provide an easy, inexpensive alternative to patching drywall. They create a clean, intentional look while keeping debris out of your stud bays. Which blank wall plate you need depends on your current décor and how large an opening you have to cover.

The WP-0 White Blank Plate is a white two-hole single-gang plate. Molded from UL listed impact resistant thermoplastic, this high-quality wall plate is solid and durable. It comes with a pair of color-matched screws and fits over any standard one-gang box or bracket. The smooth, glossy finish matches most wall plates and the beveled edges keep the WP-0 low-profile and inconspicuous. Installing this plate over an existing box takes seconds and requires only a screwdriver. Replacing it later with another single-gang wall plate is just as simple. With a lifetime warranty, you can expect this blank plate to last through endless projects.

DataComm 45-0021-WH Bulk Cable Plate

Use DataComm Electronics’ patented new recessed low voltage cable plate with recessed power to install power and low voltage cables behind your flat panel TV, your amplifier or other audio and video devices. The 45-0021 recessed low voltage cable plate with recessed power can be installed upright or upside down.

Use either a single gang retrofit work box or for new construction installations, use a new nail on box. Once you have wired the receptacle*, then begin by inserting the receptacle portion of the plate into the work box. Once the entire recessed plate is flush to the wall, using the two white screws supplied, screw the receptacle portion of the plate to the work box. Next, screw down the screws with wings. These wings will fasten tightly against the back of the drywall. Plug in all necessary video and audio cables. Install your flat panel TV mounting bracket per the flat panel TV bracket manufacturer’s instructions.

Garvin LVP1 Gang Cable Plate Flex Opening

Make wire management quick and easy with this cable wall plate from Garvin Industries. The flexible opening allows routing of up to six cables, eliminating the need for wall connections and safely corralling cables while keeping the wall opening covered. The cable pass through wall plate features built-in wings, which attach securely to the back of the drywall. As these wings are molded into the plate, it requires no additional parts for installation.

DataComm 45-0009-WH Bulk Cable Plate

Use the Easy Mount Recessed Low Voltage Cable Plate to install low voltage cables behind your flat panel TV, your amplifier, or other audio and video devices. The wall plate can be installed upright or upside down.

This plate's innovative "mounting wings" eliminate the need for a low voltage mounting bracket. The mounting wings are molded into the Easy Mount wall plate and fasten tightly against the back of the drywall. The standard Easy Mount Cable Plate has the capacity of a double gang plate in a single gang profile.

The new, thinner profile of the Easy Mount Cable Plate is designed to fit behind the industry's thinnest mounts and flat-panel TVs.

The Slim-Fit version of the Easy Mount Recessed Cable Plate is designed for use in concrete wall applications where the wall cavity is 3/4" to 1" in depth.

DataComm Décor Insert

Flex Cable Insert

DataComm’s 45-0016-WH Decor Insert is designed for use with Decor and Decora-style wall plates. These bulk inserts allow you to pull a variety of cables straight through at the beginning or end of a wire run, saving time and eliminating an extra connection at the wall. A sheet of thin flexible plastic conceals the cut-in opening and helps prevent dust and other debris from entering your stud bay. The star-style slit can easily accommodate up to four cables including HDMI, coax, and Ethernet. With a low profile and multiple angles of exit, the 45-0016-WH is great behind ultra-slim TV mounts, in entertainment closets, or anywhere else space is limited.

With a durable finish and a simple installation process, the 45-0016-WH is a versatile solution for networking and home theater cable runs. Decor wall plates come in two parts: the face plate and the insert. Using this system, you can mix and match inserts for the combination plate of your dreams. FireFold carries one, two, and three-gang Decora faceplates for use with this bulk pass-through as well as a wide variety of other inserts. To assemble, just attach this insert to your face plate then secure the face plate to a low voltage box or bracket.

Note: Decor faceplate sold separately.

Garvin 1 Gang Recessed Low Voltage Cable Plate

The Garvin LVP1NP 1 Gang Recessed Low Voltage Cable Plate is a versatile cable management tool. This wall plate allows you to easily route multiple cables through a single opening for a clean, finished look to your installation. It can be mounted upright or upside down to meet your specific requirements and provide the best angle for cable routing. This cable plate includes mounting screws for added convenience.

Quest Raceway Wire Hider | Cable Concealer 

In Hiding

What’s better than enjoying the low cost and high quality of FireFold’s extensive cable collection? Not having to see those cables running from your television! The easiest way to hide your wires from sight is the FWH-12411 from Quest. This premiere WireHider offers a professional look without the hassle of using wall plates. One inch wide, the four-foot strip of Raceway can accommodate several standard-size cables. There’s no need to be able to fit the bulky connectors through or wrestle to snap the cover back into place. A nearly invisible slit runs from end to end, allowing you to simply push your cables into place.

The FWH-12411 attaches to your wall by a strip of peel-and-stick adhesive. It is usually easier to run your cables through the WireHider after it is mounted to the wall or floor, but you can always add or remove cables easily even after it is set up. This strip is a single straight four-foot run, but it can easily be cut shorter using consumer-grade tools. With other Quest Raceway accessories, you can create curves, corners, and turns for a custom look in your home or business. Molded from smooth ABS plastic, this cable channel cannot be covered with latex paints, but the clean white color blends well with many styles of décor.

Quest Premiere Raceway Inside Corners

On a Curve

Designed for use with cable cover systems, this product is an inside corner adapter. These work especially well with Quest’s Raceway-on-a-Roll and WireHider products. With these corner adapters, you can create and customize your own unique wire runs to best hide your cords from sight. Cut and position your straight cable cover runs, securing them to the floor or wall as instructed by the manufacturer. Then snap these corner covers easily into place to conceal the wires around the bend.

In addition to providing unparalleled cable management, the corner accessory also helps prolong cable life by protecting the cords within from the bumps and scrapes associated with everyday use. Molded from sturdy ABS plastics, these accessories are fire-retardant and UV-stabilized to prevent fading and staining. They are also latex-paintable for the ultimate in color-matching. In addition to these inside corner adapters, there are also options available for outside corners and non-corner right angles.

Quest Raceway Right Angles

On a Curve

Designed for use with cable cover systems, the FRA-31412 is a two-pack of right angle adapters that allows you to make a right angle turn against a flat surface. These work especially well with Quest’s Raceway-on-a-Roll and WireHider products. With these adapters, you can create and customize your own unique wire runs to best hide your cords from sight. Cut and position your straight cable cover runs, securing them to the floor or wall as instructed by the manufacturer. Then snap these corner covers easily into place to conceal the wires around the bend.

In addition to providing unparalleled cable management, the FRA-31412 also helps prolong cable life by protecting the cords within from the bumps and scrapes associated with everyday use. Molded from sturdy ABS plastics, these accessories are fire-retardant and UV-stabilized to prevent fading and staining. They are also latex-paintable for the ultimate in color-matching. In addition to these inside corner adapters, there are also options available for outside corners and inside corners.

Quest Premiere Raceway Outside Corners

On a Curve

Designed for use with cable cover systems, these are outside corner adapters. These work especially well with Quest’s Raceway-on-a-Roll and WireHider products. With these corner adapters, you can create and customize your own unique wire runs to best hide your cords from sight. Cut and position your straight cable cover runs, securing them to the floor or wall as instructed by the manufacturer. Then snap these corner covers easily into place to conceal the wires around the bend.

In addition to providing unparalleled cable management, the corner adapters also help prolong cable life by protecting the cords within from the bumps and scrapes associated with everyday use. Molded from sturdy ABS plastics, these accessories are fire-retardant and UV-stabilized to prevent fading and staining. They are also latex-paintable for the ultimate in color-matching. In addition to these outside corner adapters, there are also options available for inside corners and non-corner right angles.

Quest Premiere Raceway Wire Hider Cover

Put a Lid on it

When paired with the FWH-12411, the FCL-22411 WireHider Cover Lid from Quest helps create the cleanest look in cable management without opening up your wall. It is designed to go on top of the FWH-12411 WireHider cable channel to cover and conceal the flexible slit. It is an optional accessory, but it offers an ultimate layer of professionalism to any cable run. Adding this cover lid to your WireHider is a snap- literally. Once your cable channel is installed and your cables are inside, simply press the lid over the wire molding until it slides into place.

This strip is a single straight four-foot run, but it can easily be cut shorter using consumer-grade tools. With other Quest Raceway accessories, you can create curves, corners, and turns for a custom look in your home or business. This lid is 1” wide, so it is only compatible with the 1” version of Quest’s WireHider and corner pieces. Molded from smooth ABS plastic, this product cannot be covered with latex paints, but the clean white color blends well with many styles of décor.

Quest Raceway Wire Hider Cover

Put a Lid on it

When paired with the FWH-11411, the FCL-21411 WireHider Cover Lid from Quest helps create the cleanest look in cable management without opening up your wall. It is designed to go on top of the FWH-11411 WireHider cable channel to cover and conceal the flexible slit. It is an optional accessory, but it offers an ultimate layer of professionalism to any cable run. Adding this cover lid to your WireHider is a snap- literally. Once your cable channel is installed and your cables are inside, simply press the lid over the wire molding until it slides into place.

This strip is a single straight four-foot run, but it can easily be cut shorter using consumer-grade tools. With other Quest Raceway accessories, you can create curves, corners, and turns for a custom look in your home or business. This lid is 1/2” wide, so it is only compatible with the 1/2” version of Quest’s WireHider and corner pieces. Molded from smooth ABS plastic, this product cannot be covered with latex paints, but the clean white color blends well with many styles of décor.

This durable metal D Ring from Garvin Industries is designed to support multiple low voltage cables when run along walls or ceilings. The generous two inch inner diameter of this low voltage ring holds up to 75 Cat5E cables. A smooth aluminum surface prevents snags and damage to wires.

This durable plastic D Ring from Garvin Industries is designed to support multiple low voltage cables when run along walls or ceilings. The generous two inch inner diameter of this low voltage ring holds up to 75 Cat5E cables. A smooth plastic surface prevents snags and damage to wires.

Stress-Free Installations

The enemy of your enemy is your friend. In the case of running low voltage cables, tension on the wires is a powerful adversary. Networking and fiber optic cables are especially prone to issues when they are allowed to bend. Strain lead to network failure and unnecessary downtime. To avoid hassle, it is important to protect the longevity and reliability of your cables. By using the Garvin JHK-21 "J" Cable Support Hook to replace traditional cable trays, you can eliminate the risk of damaging those sensitive cables over long distances and keep connections healthy for years to come.

Support Groups

Garvin JHK-21 has a solid 1” wide base and smooth, rounded corners to prevent snags while cables are being run. It is recommended that J-hooks be placed no more than 5 feet apart, and they can be attached to a wide variety of surfaces such as beams, studs, and ceilings. The pre-drilled screw hole makes attachment to structures quick and easy. Depending on the quantity and weight of your cables, you may need to space cable supports more frequently as excessive sagging between hooks is not optimal. Cable ties or other wire management types may be used to secure wires into place by running them through the small pre-punched holes on the hook.

The 1-5/16” JHK-21 is rated to hold up to 17 lbs and is wide enough for up to 50 Cat5E or fiber optic cables or 32 Cat6 cables, making them ideal for many networking applications. J-hook cable supports can be combined to create custom installation solutions for large volumes of cable or situations where cables are run to multiple locations.

Stress-Free Installations

The enemy of your enemy is your friend. In the case of running low voltage cables, tension on the wires is a powerful adversary. Networking and fiber optic cables are especially prone to issues when they are allowed to bend. Strain lead to network failure and unnecessary downtime. To avoid the hassle, it is important to protect the longevity and reliability of your cables. By using the Garvin JHK-12 "J" Cable Support Hook to replace traditional cable trays, you can eliminate the risk of damaging those sensitive cables over long distances and keep connections healthy for years to come.

Support Groups

Garvin's JHK-12 has a solid 1” wide base and smooth, rounded corners to prevent snags while cables are being run. It is recommended that J-hooks be placed no more than 5 feet apart, and they can be attached to a wide variety of surfaces such as beams, studs, and ceilings. The pre-drilled screw hole makes attachment to structures quick and easy. Depending on the quantity and weight of your cables, you may need to space cable supports more frequently as excessive sagging between hooks is not optimal. Cable ties or other wire management types may be used to secure wires into place by running them through the small pre-punched holes on the hook.

The 3/4" JHK-12 is rated to hold up to 12 lbs and is wide enough for up to 16 Cat5E or fiber optic cables or 10 Cat6 cables, making them ideal for many networking applications. J-hook cable supports can be combined to create custom installation solutions for large volumes of cable or situations where cables are run to multiple locations.

This durable metal D Ring from Garvin Industries is designed to support multiple low voltage cables when run along walls or ceilings. The generous five inch inner diameter of this low voltage ring holds up to 250 Cat5E cables. A smooth aluminum surface prevents snags and damage to wires.

Stress-Free Installations

The enemy of your enemy is your friend. In the case of running low voltage cables, tension on the wires is a powerful adversary. Networking and fiber optic cables are especially prone to issues when they are allowed to bend. Strain lead to network failure and unnecessary downtime. To avoid the hassle, it is important to protect the longevity and reliability of your cables. By using the Garvin JHK-64 4 Inch "J" Cable Support Hook to replace traditional cable trays, you can eliminate the risk of damaging those sensitive cables over long distances and keep connections healthy for years to come.

Support Groups

Garvin's JHK-64 has a wide base and smooth, rounded corners to prevent snags while cables are being run. It is recommended that J-hooks be placed no more than 5 feet apart, and they can be attached to a wide variety of surfaces such as beams, studs, and ceilings. The pre-drilled screw hole makes attachment to structures quick and easy. Depending on the quantity and weight of your cables, you may need to space cable supports more frequently as excessive sagging between hooks is not optimal. Cable ties or other wire management types may be used to secure wires into place by running them through the small pre-punched holes on the hook.

The 4" JHK-64 is rated to hold up to 30 lbs and is wide enough for up to 300 Cat5 or fiber optic cables or 185 Cat6 cables, making them ideal for many networking applications. J-hook cable supports can be combined to create custom installation solutions for large volumes of cable or situations where cables are run to multiple locations.

J hooks are an economical alternative to cable trays. The JHK-12-BW2 3/4 Inch J Cable Support Hook With Wing For #12 to 1/4 Inch Rod Attachment from Garvin Industries can be attached to beam clamps, clips and other support components. It has a fill rate of up to twenty Cat5E cables and includes a retainer clip.

Stress-Free Installations

The enemy of your enemy is your friend. In the case of running low voltage cables, tension on the wires is a powerful adversary. Networking and fiber optic cables are especially prone to issues when they are allowed to bend. Strain lead to network failure and unnecessary downtime. To avoid hassle, it is important to protect the longevity and reliability of your cables. By using the Garvin JHK-32 2 Inch "J" Cable Support Hook to replace traditional cable trays, you can eliminate the risk of damaging those sensitive cables over long distances and keep connections healthy for years to come.

Support Groups

Garvin's JHK-32 has a wide base and smooth, rounded corners to prevent snags while cables are being run. It is recommended that J-hooks be placed no more than 5 feet apart, and they can be attached to a wide variety of surfaces such as beams, studs, and ceilings. The pre-drilled screw hole makes attachment to structures quick and easy. Depending on the quantity and weight of your cables, you may need to space cable supports more frequently as excessive sagging between hooks is not optimal. Cable ties or other wire management types may be used to secure wires into place by running them through the small pre-punched holes on the hook.

The 2" JHK-32 is rated to hold up to 30 lbs and is wide enough for up to 80 Cat5 or fiber optic cables or 50 Cat6 cables, making them ideal for many networking applications. J-hook cable supports can be combined to create custom installation solutions for large volumes of cable or situations where cables are run to multiple locations.

This durable plastic D Ring from Garvin Industries is designed to support multiple low voltage cables when run along walls or ceilings. The generous five inch inner diameter of this low voltage ring holds up to 250 Cat5E cables. A smooth plastic surface prevents snags and damage to wires.

This durable plastic D Ring from Garvin Industries is designed to support multiple low voltage cables when run along walls or ceilings. The generous three inch inner diameter of this low voltage ring holds up to 150 Cat5E cables. A smooth plastic surface prevents snags and damage to wires.

5” Cable Loop

The LOOP is a versatile, low-cost alternative to traditional J-hooks and cable trays. For use with beam clamps in new and existing construction, these flexible non-metallic wire hangers elevate and contain your communications cable without any bending, sagging, or damage. They’re perfect for fiber optic and Cat cables. These cable loops can be mounted parallel or perpendicular to the beam, and they can be stacked to maximize space.

Manufactured by Arlington, the TL50P is a 5” version of The LOOP. It can hold a wire bundle up to 5” in diameter, the equivalent of about 300 Cat5 cables. These patented hoops are also UL listed for use in environmental air handling spaces and they are UV rated to withstand long-term outdoor use. A unique design makes adding, subtracting, or changing the cables in your current run quick and painless. The loop can be unfastened and refastened by lifting the tab off or onto a latch. The LOOP is also available for purchase in a 2” and a 2.5” size.

2” Cable Loop

The LOOP is a versatile, low-cost alternative to traditional J-hooks and cable trays. For use with beam clamps in new and existing construction, these flexible non-metallic wire hangers elevate and contain your communications cable without any bending, sagging, or damage. They’re perfect for fiber optic and Cat cables. These cable loops can be mounted parallel or perpendicular to the beam, and they can be stacked to maximize space.

Manufactured by Arlington, the TL20P is a 2” version of The LOOP. It can hold a wire bundle up to 2” in diameter, the equivalent of about 60 Cat5 cables. These patented hoops are also UL listed for use in environmental air handling spaces and they are UV rated to withstand long-term outdoor use. A unique design makes adding, subtracting, or changing the cables in your current run quick and painless. The loop can be unfastened and refastened by lifting the tab off or onto a latch. The LOOP is also available for purchase in a 2.5” and a 5” size.

Nail-in Coax Cable Clip RG-59 100pk

Cable Clutter

Free-range cables can be a pest. Turn your back and suddenly it seems like there were more than you had to begin with. Leave them alone long enough and they’re spilling out everywhere. There’s no avoiding them, not at home or work. You need wires for your entertainment center, your network, and chances are there are wires all over the inside of your computer. Especially in a professional setting, no one wants to see a careless cord cluster. Messy cables aren’t just aesthetically unappealing- they can also cause injury or damage. We’ve all tripped over a cord on the floor that shouldn’t have been there, and pets are especially prone to snack on loose wires. Even if no one interferes, tangled cables can impede proper air circulation that is especially harmful to the delicate circuits in electronic equipment.

Clip It

Cable management is important, and although it can seem tedious, it doesn’t have to be. There are many ways to handle your renegade cords, but sometimes you only have one to run. When all you have to run is a single coax or Ethernet cable, zip ties and Velcro ties are overkill. Cable clips like FireFold’s NAILIN-COAX are the ideal solution for those simpler jobs. Small enough to hide along a baseboard or crown molding, these cable clips each have a single built-in nail that can be tapped into your wall to hold the cable in place. When purchasing cable clips, keep in mind the type of cord you are mounting. These will fit RG59 coax and Cat5E and Cat6 Ethernet correctly. The easiest way to ensure a tight, straight installation is to put a single clip about every six feet of your run and then carefully pull the cable taut and nail an additional clip between the others. This 100-pack of black nail-in cable clips will get you through many projects. If you need to color-match or color-code, these coax clips also come in white.

Velcro Strap - 0.5 Inch Width 50 Pack

Free-range cables can be a pest. Turn your back and suddenly it seems like there were more than you had to begin with. Leave them alone long enough and they’re spilling out everywhere. There’s no avoiding them, not at home or at work. You need wires for your entertainment center, your network, and chances are there are wires all over the inside of your computer. Especially in a professional setting, no one wants to see a careless cord cluster. Messy cables aren’t just aesthetically unappealing- they can also cause injury or damage. We’ve all tripped over a cord on the floor that shouldn’t have been there, and pets are especially prone to snacking on loose wires. Even if no one interferes, tangled cables can impede proper air circulation which is especially harmful to the delicate circuits in electronic equipment.

Stick It

Cable management is important, and although it can seem tedious, it doesn’t have to be. There are many ways to bundle up your renegade cords, but Velcro ties are a good option. They’re easy, economical, and durable but they can also be reused or adjusted many times before they start to lose their grip. They can also be used with a variety of other cable management tools like racks, trays, and j-hooks for truly professional installations. They are also soft enough to avoid scratching the delicate wires they are tying together.

FireFold’s VELCRO-6 is a great choice for average cable bunches. They are only ½” wide so they work well in tighter spaces like PCs or behind desks. These 6” Velcro cable ties are flexible and secure. Their classic hook-and-loop technology creates a bond that is lasting but can also be separated. In most cases, these wire ties can stand up to just as much pressure as their zip-tie counterparts. They are best suited to medium-duty applications as they can securely wrap around a collection of wires up to 1.125” across. This 50-pack will last the average user for years, but there are enough to complete most major projects and our standard low price can’t be ignored.

4 Inch Marker Cable Tie - Pack of 100.

Cable Clutter

Free-range cables can be a pest. Turn your back and suddenly it seems like there were more than you had to begin with. Leave them alone long enough and they’re spilling out everywhere. There’s no avoiding them, not at home or at work. You need wires for your entertainment center, your network, and chances are there are wires all over the inside of your computer. Especially in a professional setting, no one wants to see a careless cord cluster. Messy cables aren’t just aesthetically unappealing- they can also cause injury or damage. We’ve all tripped over a cord on the floor that shouldn’t have been there, and pets are especially prone to snacking on loose wires. Even if no one interferes, tangled cables can impede proper air circulation which is especially harmful to the delicate circuits in electronic equipment.

Zip It

Cable management is important, and although it can seem tedious, it doesn’t have to be. There are many ways to bundle up your renegade cords, but cable ties- also called zip-ties- are the most common method. They’re easy, economical, and designed to last. When there are a large number of wires to be run, sometimes you also need to be able to easily identify cables by purpose, destination, or an endless number of other designations. Even if there aren’t an overwhelming number of cords, tagging your runs can save you time and money later when you have to troubleshoot or upgrade.

FireFold’s MARKER-TIES is a great choice for smaller cable bunches that also need to be labeled. They also work well in tighter spaces like desktop PCs. These 4” nylon cable ties are flexible and secure. You can stick a label onto the rectangular tab or even write directly onto it. Their classic groove and ratchet design locks the tie into place, preventing loosening even over time. With a tensile strength of 18 lbs, these little cable ties are best suited to light- and medium-duty applications. They’re UL rated as self-extinguishing, so they’re perfect for areas where the temperature is a concern. This 100-pack will last the average user for years, but there are enough to complete most major projects and our standard low price can’t be ignored.

Nylon Cable Tie

Cable Clutter

Free-range cables can be a pest. Turn your back and suddenly it seems like there were more than you had to begin with. Leave them alone long enough and they’re spilling out everywhere. There’s no avoiding them, not at home or at work. You need wires for your entertainment center, your network, and chances are there are wires all over the inside of your computer. Especially in a professional setting, no one wants to see a careless cord cluster. Messy cables aren’t just aesthetically unappealing- they can also cause injury or damage. We’ve all tripped over a cord on the floor that shouldn’t have been there, and pets are especially prone to snacking on loose wires. Even if no one interferes, tangled cables can impede proper air circulation which is especially harmful to the delicate circuits in electronic equipment.

Zip It

Cable management is important, and although it can seem tedious, it doesn’t have to be. There are many ways to bundle up your renegade cords, but cable ties- also called zip-ties- are the most common method. They’re easy, economical, and designed to last and they can be used in conjunction with an endless number of other cable management systems. The size cable tie you need is largely dependent on how many wires you want to wrangle.

FireFold’s CABLETIE is a great choice for smaller cable bunches. They also work well in tighter spaces like desktop PCs. These nylon cable ties are flexible and secure. Their classic groove and ratchet design locks the tie into place, preventing loosening even over time. With a tensile strength of 18 lbs, these little cable ties are best suited to light- and medium-duty applications. They’re UL rated as self-extinguishing, so they’re perfect for areas where the temperature is a concern. This 100-pack will last the average user for years, but there are enough to complete most major projects and our standard low price can’t be ignored. If you need to color-code or color-match your installation, these cable ties also come in a clear natural.

These cable tie mounts from Vertical Cable are a convenient and versatile tool for attaching cables and wires to walls, ceilings, furniture, or just about anywhere you would need to run cables. They are designed for use with four to fifteen inch cable ties, and feature rubber-based self-adhesive backs for quick and easy installation. They come in a pack of one hundred for multiple mounting locations.

 USB 2.0 to Serial Adapter, USB to RS232 Cable

USB to RS232 Serial Adapter (DB9-Male Hex nut) :

The USB to RS-232 Bridge Converter converts a USB port into RS-232 serial port allowing you to connect to monitor and control your serial devices. (Works with digital camera, cell phone, PDA, modem, mouse, PDA, GPS, ISDN terminal adapter etc.) Its cost-effective but high performance such like remote wake-up & power-on-reset is widely recommended by serial device manufacturers. For its high durability, hot plug-and-play operation, computer OS compatibility, via data transfer rate up to 250kbps; it is most applicable to industrial environments (no IRQs requirement) and simple desktop installations.

USB C to Gigabit Ethernet Adapter

This USB Type C to Gigabit Ethernet RJ45 Adapter allows you to connect PCs, tablets, gaming consoles, smartphones, and other mobile devices to a Gigabit network when wireless is not available. It supports USB 3.1 Generation 1 speeds.

Compatible Devices for USB 3.1 Type-C with DP Alt Mode or Thunderbolt^TM 3 (not a full list)

PC: 

• MacBook 2015 and newer/ MacBook Pro 2016 and newer/ iMac 2017 and newer/ iMac Pro 2017 and newer
• MacBook Air 2018/ iPad Pro 2018 / New Mac Mini
• Dell XSP 15/13
• ASUS T303ua/ ZenBook 3
• Lenovo YOGA900/910/920 / Lenovo Thinkpad X1 Carbon 5th 
• Chromebook Pixel 2
• HP EliteBook Folio G1/ Spectre 13 X360
• Huawei Matebook

 And more... 

Smartphones： 

• Huawei Mate 10
• Samsung Galaxy S8/S8+/S9 / Samsung Galaxy Note8/9
• Microsoft Lumia 950 / LG G5 / V20 / V30

And more...

USB Type C to VGA Female Adapter

This USB Type C to VGA Female Adapter allows you to connect a high definition monitor or TV to your desktop PC or laptop using your computer's USB 3.1 port. This adapter supports resolutions up to 1080p, so you can experience full HD.

USB-C Male to USB Female Adapter

Instantly connect any standard Type A USB connector to a USB Type C port with this convenient adapter. You'll be able to use your existing USB devices with your newer computer or tablet with USB Type C connections. Enjoy the simple plug and play operation of this handy adapter.

USB Type A to Type B Adapter Micro-USB - FireFold

Transform your standard Type A USB cable into the Micro USB connection your smartphone uses with this handy adapter. The female end accepts the Type A USB cable, transforming it into Micro USB Type B male on the other end.