Under $25

Intellinet Power over Ethernet (PoE) Injector

1 Port, 48 V DC, IEEE 802.3af Compliant

Reduce costs by using existing Cat5 cable to provide both power and data

The Power over Ethernet Injector from Intellinet Network Solutions allows you to connect your IEEE 802.3af-compliant products to a non-PoE LAN switch port. The injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3af powered device (PD) to a switch.

Reduce Wiring Costs

No need to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the PoE Injector to the LAN switch port, and use the existing Cat5 cabling to deliver DC power as well as transfer data.

Preserve Existing Investments

Does your existing LAN switch not support the new IEEE 802.3af PoE standard? Well, don’t let that stop you from realizing the benefits of delivering DC power over the existing Cat5 Ethernet cabling. Use the Model 503389 PoE Injector until you are able to upgrade your LAN switch to a model that supports the IEEE 802.3af PoE standard.

Protect Your Equipment

Now that you are running DC power to your networked equipment through the Cat5 cabling, you need to be sure that the products are protected from power problems. The PoE Injector was designed to protect equipment from short circuits (short GRND), current overloads (over 450 mA) and high voltages (voltage exceeding 52 V).

Platinum Tools PoE+ 10Gig RJ45 Shielded Field Plug - 2/Clamshell

The PoE+ 10Gig Shielded RJ45 Field Plug optimizes data throughput to PoE+ powered devices. Compatible with a wide assortment of large cables with large conductors. The cast-metal shell provides end-to end shielding from extraneous noise interference in high bandwidth applications.

Quest Cat6A Shielded 180 Degree Tooless Keystone Jack

Quest offers a Cat6A Shielded Power Over Ethernet keystone jack with high-speed data transfers over 10Gbps . Our 180 degree 110 IDC jacks are tooless and are easty to terminate. Fits in high-density keystone patch panels, surface mount boxes and face plates.

Quest Cat6A Utp 180 Degree Tooless Keystone Jacks

Quest offers a Cat6A Power Over Ethernet keystone jack with high-speed data transfers over 10Gbps . Our 180 degree 110 IDC jacks are tooless and are easty to terminate. Fits in high-density keystone patch panels, surface mount boxes and face plates.

Passive PoE Adapter

Powers TP-Link products that support 48V passive PoE, TL-POE4824G

Power Your Devices

Use the passive PoE adapter TL-POE4824G to simultaneously supply power and transmit data to a passive PoE device.

Convenient Wall-Mounting Design

TL-POE4824G offers a convenient wall-mounting brackets to be easily installed on a wall.

Compatible Devices

TL-POE4824G is recommended to offer power supply to TP-Link’s passive PoE products which as follows.

• EAP245 V3.0

Passive PoE Adapter

Powers TP-Link products that support 24V passive PoE, TL-POE2412G

Power Your Devices

Use the passive PoE adapter TL-POE2412G to simultaneously supply power and transmit data to a passive PoE device.

Convenient Wall-Mounting Design

TL-POE2412G offers a convenient wall-mounting brackets to be easily installed on a wall.

Now you can use affordable Ethernet cables to avoid installing costly new electrical wiring. The TP-Link TL-POE150S PoE Injector provides the ability to expand a network to areas without power lines or outlets. It's perfect for access points and IP cameras requiring remote placement. It can transmit a power source up to 328 feet away using a standard Ethernet cable. With simple plug and play installation and two Gigabit ports enabling top speed, you'll be up and running in no time instead of waiting on an electrician.

*Note: Requires PoE Splitter for use with non-PoE devices (sold separately).

Enable-IT 4-Port Coax Gigabit PoE Extender Kit

The Enable-IT 865XSC Gigabit Coax PoE Extender is the fastest encrypted and Secure Ethernet Extender on the planet bar none!

Designed & Made in the USA with quality and pride. These American-made Enable-IT 865XSC Gigabit Coax PoE Extender uses industry Coaxial standard 75 Ohm BNC connectors to make installing in most any environment very easy. We have engineered most of the technical complexity into automatic line adjustments so the plug and go simplicity on your existing or new wiring is a snap.

Ethernet Extension Experts designs and manufactures the Enable-IT 865XSC Gigabit Coax PoE Extender kit, along with its entire product line, in the USA that makes us more responsive to customer needs . We take great pride in using the highest quality materials and actual craftsmanship when building our products. We even can customize these at time of order to fit your specific needs as we manufacture in our very own US West coast facilities.

This is trusted Business Reliable Professional Grade PoE Extension without the high cost of fiber or unsecured wireless. Why risk your business to lower quality imported equipment? The value of your network communications should be a protected investment. Beware of Cheap Chinese “so called Business Use” (not even suitable US Home use) gear that is banned in the US due to proven hidden spyware.

The Enable-IT 865XSC PRO Gigabit Coax kit uses 75 Ohm coaxial wiring for best performance. The 865XSC PRO Gigabit Coax PoE Extender can support up to 9 865XC CPE units on the same coax wire, and actually can run on just 1 physical wire!

Keep in mind that all DC including (PoE) voltage drops over distance and thicker gauge wire will help this issue. As a rule of thumb you will lose up to 6V per every 200 feet of wiring, depending on the gauge. For example in Category 5 or 6 24 AWG there is less wire/copper to conduct electricity which is lower power strength at distance due to impedance. Lower power strength increases the amperage and that generates more heat in the wire. Depending on distance, you may need to use more pairs or wire or 18 gauge wiring as a dedicated DC power buss – like low voltage landscape wire and run Ethernet on a 1-pair 24 AWG. There are options to maximize your distance and PoE output when used in conjunction with our PoE Extenders or PoE DSLAM that can power a 56V 60W PoE IP PTZ Camera at 3,000 ft away.