Shop
Networking
Bulk Wire & Cable
Cables
Racks & Enclosures
Tools
Audio/Video/Home
HDMI
Mounts
Security
Adapters
Usb/Mobile/Tablet
Electrical
Technical Furniture
Shop Brands
FireFold
ICC
Intellinet Network Solutions
Jonard Tools
j5create
Kendall Howard
Netstrand
Paige Electric
Platinum Tools
Quest
Rhino Brackets
SimplyBrands
Structured Cable Products
Vanco
Vertical Cable
Wavenet
World Cord Sets
View All
About Us
Customer Service
Returns
Order Status
Shipping Policy
Customer Reviews
Contact Us
70497971000
Support@FireFold.com
Free Shipping on Orders > $99.99 - *Some Exclusions May Apply
Filter
SimplyTEST Launch Cable, OM3, 150m, SC-ST
Launch Cable, OM3, 150m, SC-ST
$254.94
SimplyTEST Launch Cable, OM3, 150m, SC-SC
Launch Cable, OM3, 150m, SC-SC
SimplyTEST Launch Cable, OM3, 150m, SC-LC
Launch Cable, OM3, 150m, SC-LC
5% offat checkout
SimplyTEST FiberMASTER Multimode OTDR
FiberMASTER Multimode OTDR (850/1300) with SC connector, Inspection port, Power meter
Test, Troubleshoot and Certify cabling faster with the FiberMASTER OTDR.
The FiberMASTER OTDR is available in 4 options, Quad, multimode, singlemode and PON.
The OTDRs feature both high dynamic range and small dead zones providing the precision required for installation and troubleshooting alike. The software simplifies certification of cabling to meet TIA/ISO/IEC/IEEE requirements with simple pass/fail results. Additionally custom test parameters are easily set to accommodate any application.
OTDRs can be complicated to configure and achieve accurate results. FiberMASTER automates testing and steps you through the process as shown below.
For FTTx/FTTH applications the PON OTDR identifies split ratios for easy testing and troubleshooting of inactive and active networks. The 1625nm wavelength allows in-service testing of networks without interrupting existing subscribers.
Why do I need a FiberMASTER?
It depends how important speed and accuracy are to you.
FiberMASTER – size, simplicity and value without compromise, made in the USA, tested in Germany.
The new FiberMASTER series of fiber optic testers will make it easier and faster to verify, troubleshoot and certify fiber optic cabling.The OTDR, PON OTDR, Power Meter and Light Source, and Inspection Probe will enable cable installers to get the dependable test results needed, while saving thousands of dollars.As one of the smallest OTDRs in the world you will find them easier to carry and operate while the rubberized housing will protect your investment. The simplified setup options makes them easy to use, saving you time on training and reducing the likelihood of errors.
Our New York Research and Development center of excellence has over 30 years experience designing OTDRs providing you with the most advanced, compact optical test systems available.
$3,819.88
Select Options
SimplyFIBER SC/PC Multimode Mechanical Connector w/ High Clarity Matching Gel, 62.5µm, OM1, 250/900µm Fiber, Beige
Simply – SC/PC Premium multimode mechanical reusable connector with high clarity matching gel, 62.5µm, OM1, 250/900µm fiber, beige – 1ea/Bag
From $18.50 - $162.95
SimplyFIBER SC/PC Multimode Mechanical Connector w/ High Clarity Matching Gel, 50µm, OM3/4, 250/900µm Fiber, Aqua
Simply – SC/PC Premium multimode mechanical reusable connector with high clarity matching gel, 50µm, OM3/4, 250/900µm fiber, aqua – 1ea/Bag
SimplyFIBER SC/PC Multimode Mechanical Connector w/ High Clarity Matching Gel, 50µm, OM2, 250/900µm Fiber, Black
Simply – SC/PC Premium multimode mechanical reusable connector with high clarity matching gel, 50µm, OM2, 250/900µm fiber, black – 1ea/Bag
SimplyFIBER LC/PC MM OM1 Mechanical Connector
Simply – LC/PC Premium multimode mechanical reusable connector with high clarity matching gel, 62.5µm, OM1, 250/900µm fiber, beige
SimplyFIBER LC/PC MM OM3/4 Mechanical Connector
Simply – LC/PC Premium multimode mechanical reusable connector with high clarity matching gel, 50µm, OM3/4, 250/900µm fiber, aqua
SimplyFIBER LC/PC MM OM2 Mechanical Connector
Simply – LC/PC Premium multimode mechanical reusable connector with high clarity matching gel, 50µm, OM2, 250/900µm fiber
SimplyFIBER Duplex SC/PC to SC/PC Aqua Multimode Fiber Optic Keystone Jack OM3/4
Duplex SC/PC to SC/PC Aqua Multimode Fiber Optic Keystone Jack OM3/4
From $5.60 - $55.95
SimplyFIBER Duplex LC/PC to LC/PC Aqua Multimode Fiber Optic Keystone Jack OM3/4
Duplex LC/PC to LC/PC Aqua Multimode Fiber Optic Keystone Jack OM3/4
From $6.50 - $63.95
SimplyFIBER Surface Mount Fiber Box, 2-Port Multimode SC Aqua OM3/4 Adapter, White
Surface mount fiber box, 2-port Multimode SC Aqua OM3/4 adapter, white – 1ea/Bag
$12.95
SimplyFIBER Surface Mount Fiber Box, 2-Port Multimode LC Aqua OM3/4 Adapter, White
Surface mount fiber box, 2-port Multimode LC Aqua OM3/4 adapter, white – 1ea/Bag
Cleerline SC/UPC Multimode Simplex Adapter (Aqua)
Cleerline™ Fiber Optic Feedthrough Adapters provide easy cable connections. This Simplex SC to SC multimode adapter is an accessory to our Indoor or Outdoor Terminal Box.
$2.28
Cleerline LC/UPC Multimode Simplex Adapter (Aqua)
Cleerline™ Fiber Optic Feedthrough Adapters provide easy cable connections. This Simplex LC to LC multimode adapter is used to couple connectors for testing or other purposes.
Cleerline SC/UPC Multimode Duplex Adapter (Aqua)
Cleerline™ Fiber Optic Feedthrough Adapters provide easy cable connections. This Duplex SC to SC multimode adapter is an accessory for use in coupling connectors or replacing adapters on our plates.
$2.63
Cleerline LC/UPC Multimode Duplex Adapter (Aqua)
Cleerline™ Fiber Optic Feedthrough Adapters provide easy cable connections. This Duplex LC to LC multimode adapter is an accessory to our Indoor or Outdoor Terminal Box.
Cleerline SSF™ Rugged Micro-Distribution LT, Riser I/O, 50/125, OM3
Cleerline™ RMD50125OM3R fiber cable is a 2 strand Multimode OM3 Micro Distribution with an overall 6.1 mm riser rated PVC jacket. This cable features a rugged outer jacket with a 1.25 mm thickness and incorporates fiberglass yarns for rodent resistance.
The Rugged Micro Distribution is designed to withstand harsher environments, with a maximum tensile load of 2700 N or 607 lbf during installation. The cable’s black PVC jacket is UV resistance, and the fiber strands are color-coded per TIA/EIA 598C standards for easy identification.
Cleerline SSF™ Rugged Micro Distribution multimode is fully compatible with all common connector systems for standard 50/125 multimode fibers.
From $1.66 - $3,056.67
Cleerline SSF™ Rugged Micro-Distribution LT, Riser I/O, 50/125, OM4
Cleerline™ 12RMD50125OM4R fiber cable is a 12 strand Multimode OM4 Micro Distribution with an overall 6.1 mm riser rated PVC jacket. This cable features a rugged outer jacket with a 1.25 mm thickness and incorporates fiberglass yarns for rodent resistance.
From $2.88 - $3,520.00
Cleerline SSF™ Single Tube Micro-Distribution LT, Plenum I/O, 50/125, OM3
Cleerline™ 24STD50125MOM3P is a multimode OM3 fiber optic cable designed for high-density data communication backbones. With an overall plenum-rated jacket, this cable features a single loose tube construction, making it ideal for both inter-building and intra-building installations.
It is fully compatible with all common connector systems for standard 50/125 multimode fiber. The cable includes SSF™ fibers that offer exceptional durability and strength, with up to 10,000 times the bend longevity of traditional fiber.
From $5.82 - $4,840.00
Cleerline SSF™ Micro-Distribution LT, Plenum I/O, 50/125, OM4
Cleerline™ D50125MOM4P is a Multimode OM4 Micro Distribution cable that has an overall plenum jacket.
Cleerline SSF™ Micro Distribution multimode fiber is fully compatible with all common connector systems for standard 50/125 multimode fiber.
The included SSF™ fiber provides extreme durability and strength.
From $1.88 - $2,845.00
Cleerline SSF™ Micro-Distribution LT, LSZH-CPR I/O, 50/125, OM4
Cleerline™ D50125MOM4L is a multimode OM4 Micro Distribution cable with an overall LSZH jacket. Cleerline SSF™ Micro Distribution multimode fiber is fully compatible with all common connector systems for standard 50/125 multimode fiber. The included SSF™ fiber provides extreme durability and strength. LSZH CPR-rated (Europe compliant) and non-rated USA requirements
From $1.80 - $2,965.85
Cleerline SSF™ Micro-Distribution LT, Riser, 50/125, OM3
Cleerline™ D50125MOM3R is a Multimode OM3 Micro Distribution cable that has an overall riser jacket.
From $1.14 - $2,333.33
Cleerline SSF™ Micro-Distribution LT, Plenum I/O, 50/125, OM3
Cleerline™ 2D50125MOM3P-B is a Multimode OM3 Micro Distribution cable that has an overall plenum jacket.
From $0.78 - $2,463.33
Cleerline SSF™ Micro-Distribution LT, LSZH-CPR I/O, 50/125, OM3
Cleerline™ 4D50125MOM3L-B is a multimode OM3 Micro Distribution cable with an overall LSZH jacket. Cleerline SSF™ Micro Distribution multimode fiber is fully compatible with all common connector systems for standard 50/125 multimode fiber. The included SSF™ fiber provides extreme durability and strength. LSZH CPR-rated (Europe compliant) and non-rated USA requirements
From $1.16 - $2,303.33
Cleerline Duplex SSF™ Riser, 50/125, OM4
The Duplex Fiber Cable is a 50/125 multimode OM4 cable, designed with a zipcord construction featuring two 3.0 mm riser cables. The cable’s zipcord construction allows easy separation of the fiber strands if desired.
The SSF™ Duplex cable is fully compatible with all common connector systems for standard multimode 50/125 fibers. The included SSF™ fibers provide extreme durability and strength, with up to 10,000 times the bend insensitivity of traditional fiber.
From $0.90 - $741.67
Cleerline Duplex SSF™ Plenum I/O, 50/125, OM4
The Duplex Fiber Cable is a 50/125 multimode OM4 cable, designed with a zipcord construction featuring two 3.0 mm plenum cables. The cable’s zipcord construction allows easy separation of the fiber strands if desired.
From $1.02 - $838.33
Cleerline Duplex SSF™ Riser, 50/125, OM3
The Duplex Fiber Cable is a 50/125 multimode OM3 cable, designed with a zipcord construction featuring two 3.0 mm riser cables. The cable’s zipcord construction allows easy separation of the fiber strands if desired.
From $0.74 - $618.33
Cleerline Duplex SSF™ Plenum I/O, 50/125, OM3
The Duplex Fiber Cable is a 50/125 multimode OM3 cable, designed with a zipcord construction featuring two 3.0 mm plenum cables. The cable’s zipcord construction allows easy separation of the fiber strands if desired.
From $0.88 - $728.33
Cleerline Duplex SSF™ LSZH-CPR I/O, 50/125, OM3
The D50125MOM3L Duplex Fiber Cable is a 50/125 multimode OM3 cable, designed with a zipcord construction featuring two 3.0 mm LSZH cables. If desired, the cable’s zipcord construction allows easy separation of the fiber strands.
The SSF™ Duplex cable is compatible with all common connector systems for standard multimode 50/125 fibers. The included SSF™ fibers provide extreme durability and strength, with up to 10,000 times the bend insensitivity of traditional fiber.
LSZH CPR-rated (Europe compliant) and non-rated USA requirements
From $0.86 - $700.00
Cleerline SSF™ Armored Direct Burial Micro-Distribution LT, PE/OSP/Burial, 50/125, OM4
Cleerline SSF™ Multimode OM4 Armored Corrugated Steel Micro Distribution cable with an overall PE jacket.
The core is protected by a corrugated armored steel tube that offers easy installation and high crush resistance. A polyethylene, UV-resistant jacket protects the cable, allowing direct burial.
Cleerline SSF™ Armored Multimode is fully compatible with all common connector systems for standard 50/125 multimode fiber.
This product offers bend performance beyond EIA SP2840A, superior crush resistance, and superior pull.
From $3.80 - $5,280.00
Cleerline SSF™ Armored Direct Burial Micro-Distribution LT, PE/OSP/Burial, 50/125, OM3
Cleerline SSF™ Multimode OM3 Armored Corrugated Steel Micro Distribution cable with an overall PE jacket.
From $2.20 - $4,366.67
Free Shipping
Cleerline 25G SFP28 SR Transceiver MM, 100m
Cleerline™ SSF-SFP28-25GSR is a high-performance 25G SFP28 SR Optical Transceiver designed for short-range multimode fiber (MMF) communication, supporting distances of up to 70 meters over OM3 and 100 meters over OM4. This single-rate module is compliant with IEEE 802.3by 25GBASE-SR optical specifications and features a dual-directional design with a duplex LC optical connection. It is backward compatible with legacy 10G SFP+ modules, providing flexibility for various network upgrades. The module operates with a single +3.3V power supply and supports a control management interface via a 2-wire serial interface, which facilitates serial ID, digital diagnostics, and module control functions.
The SSF-SFP28-25GSR transceiver is equipped with a 25G 850nm VCSEL transmitter and a 25G PIN photo-detector, ensuring reliable data transmission and reception. It features an all-metal housing for superior EMI performance and operates within a temperature range of 0 to 70°C. The module supports digital diagnostic monitoring compliant with SFF-8472 and has a maximum power consumption of 1.0W. It is ideal for high-speed storage area networks, computer cluster cross-connects, custom high-speed data pipes, and inter-rack connections, providing robust and efficient solutions for modern data communication needs.
$88.86
Cleerline 1.25G SFP Transceiver MM, 550m
Cleerline™ SSF-SFP-MM1G transceiver is a high-performance, cost-effective module supporting data-rates of 1.25Gbps and 550m transmission distance with multimode fiber.
This SFP uses the 1000Base-SX standard, popular for short range connections.
The transceiver consists of three sections: a VCSEL laser transmitter, a PIN photodiode integrated with a transimpedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.
The transceivers follow the industry standards of the SFP Multi-Source Agreement (MSA) and SFF-8472, making them directly interchangeable with any networking device following industry standards.
$26.95
Cleerline 10G SFP+ Transceiver MM, 300m
Cleerline™ SSF-SFP-MM10G is a 10G SFP+ transceiver designed for multimode fiber (MMF) applications, offering high-speed data transmission at 10 Gigabit speeds. This module supports a maximum reach of 300 meters using 50/125 µm multimode optical fiber and operates at an 850nm wavelength. The SSF-SFP-MM10G is compliant with the 10GBASE-SR standard and is ideal for short-range data communication.
The SSF-SFP-MM10G features a low-power, hot-pluggable design with an 850nm VCSEL transmitter and a PIN photodetector, ensuring efficient data transmission. It offers a maximum link length of 300 meters on 2000 MHz/km MMF and supports operating temperatures from 0 to 70°C. The module's electrical interface is compliant with SFI specifications, and it includes advanced firmware for system encryption. Its all-metal housing provides superior EMI performance, making it a cost-effective solution for high-density port applications.
This transceiver is suitable for various applications, including 10GBASE-SR at 10.3125Gbps, 10GBASE-SW at 9.953Gbps, and other optical links. It is designed for use in data centers, enterprise networks, and high-speed storage area networks (SANs), ensuring reliable and efficient data communication. The SSF-SFP-MM10G's compliance with IEEE 802.3ae and MSA SFF-8431 standards ensures compatibility with a wide range of networking equipment, making it an ideal choice for upgrading and expanding network infrastructure.
$44.66
Cleerline™ ST/UPC Multimode OM3-4 Connector for 250µm, 900µm, 2mm, 3mm
Cleerline™ ST multimode OM3/4 mechanical connectors ensure precise fiber alignment, producing low loss terminations for your multimode fiber.
Connectors are compatible with 250 µm, 900 µm, 2 mm and 3 mm fiber cables. No crimping or proprietary tooling is required to terminate. The connectors feature a large confirmation window for easy verification and a V-groove channel for easy fiber insertion.
Cleerline™ ST multimode OM3/4 Connectors are compatible with all SSF™ fibers as well as standard 50/125 multimode fibers.
$31.26
Cleerline™ SC/UPC Multimode OM3-4 Connector for 250µm, 900µm, 2mm, 3mm
Cleerline™ SC multimode OM3/4 mechanical connectors ensure precise fiber alignment, producing low loss terminations for your multimode fiber.
Cleerline™ SC multimode OM3/4 Connectors are compatible with all SSF™ fibers as well as standard 50/125 multimode fibers.
From $101.91 - $243.23
Cleerline™ LC/UPC Multimode OM3-4 Connector for 250µm, 900µm, 2mm, 3mm
Cleerline™ LC multimode OM3/4 mechanical connectors ensure precise fiber alignment, producing low loss terminations for your multimode fiber.
Cleerline™ LC multimode OM3/4 Connectors are compatible with all SSF™ fibers as well as standard 50/125 multimode fibers.
From $30.26 - $332.91
Cleerline Adapter Plate, 6 Fiber, Simplex, ST/UPC, 50 µm OM3-4 or 9 µm OS2
Cleerline™ 6 port ST adapter plate has a simple push-in design. These adapters plates fit any LGX compatible Rack Mount and Wall Mount enclosures, making it easy to add additional ports as needed.
$39.41
Cleerline Adapter Plate, 12 Fiber, Duplex, SC/UPC, 50 µm OM3-4, Aqua
Cleerline™ 12 port SC multimode adapter plate has a simple push-in design. These adapters plates fit any LGX compatible Rack Mount and Wall Mount enclosures, making it easy to add additional ports as needed.
$32.44
Cleerline Adapter Plate, 06 Fiber, Simplex, SC/UPC, 50 µm OM3-4, Aqua
Cleerline™ 6 port SC multimode adapter plate has a simple push-in design. These adapters plates fit any LGX compatible Rack Mount and Wall Mount enclosures, making it easy to add additional ports as needed.
$25.36
Cleerline Adapter Plate, 24 Fiber, Quad, LC/UPC, 50 µm OM3-4, Aqua
Cleerline™ 24 port LC multimode adapter plate has a simple push-in design. These adapter plates fit any LGX compatible Rack Mount and Wall Mount enclosures, making it easy to add additional ports as needed.
$59.12
Cleerline Adapter Plate, 12 Fiber, Duplex, LC/UPC, 50 µm OM3-4, Aqua
Cleerline™ 12 port LC multimode adapter plate has a simple push-in design. These adapter plates fit any LGX compatible Rack Mount and Wall Mount enclosures, making it easy to add additional ports as needed.
$36.76
Cleerline Fiber Optic Keystone Insert, Simplex SC to SC, Multimode
Cleerline™ Fiber Optic Keystone Insert provides easy cable connections. Simplex SC to SC multimode adapter provides a simple solution for fiber to the plate.
$4.99
Cleerline Fiber Optic Keystone Insert, Duplex LC to LC, Multimode
Cleerline™ Fiber Optic Keystone Insert provides easy cable connections. Duplex LC to LC multimode adapter provides a simple solution for fiber to the plate.
Cleerline Multimode Duplex Patch Cable, 3.0 mm Riser
Cleerline XD fiber optic patch cords deliver extreme performance and reliability for all system connections. XD series patch cords incorporate Cleerline’s BendSafe® technology.
Designed for reliability in all applications, XD series patch cords provide flexible interconnection to active equipment, passive optical devices, and cross-connects. XD series patch cords exhibit lower optical power loss under bend than standard cables and are compatible with all conventional cabling.
Available in duplex configuration OM3, OM4 (multimode), and OS2 (single-mode) type fibers. LC style are clipped.
From $6.96 - $25.84
TiniFiber 12 Fiber OM4 250um Plenum Indoor/ Outdoor Armored Fiber Optic Cable - 1000ft
TiniFiber® is a revolutionary designed fiber optic cable that will provide the single best solution for all your fiber optic projects and usage. Micro Armor Fiber™ can be used in any application: Telco, CATV, LAN, SAN, Broadcast, DAS, Communication, Security, Indoor, Outdoor and Aerial installations.
$3,932.05
×
×