HDMI Over CATx Extenders
Evolution HDMI Extender 4K 70m w/ Loop Out, Digital Optical Breakout, Bi-Directional IR, PoC
HDMI Extender 4K 70m
The Evolution by Vanco EVEX4K70 HDMI Extender over single Cat6 with Digital Audio Breakout, HDMI Loop-out, IR, and PoE, extends 4K@60Hz, 4:4:4 Chroma, and HDR10 up to 230ft/70m. Vanco’s patented bi-directional Power over Ethernet (PoE) Technology transmits power over Cat6, allowing either the Transmitter or Receiver to be powered without the use of a power supply for an easy installation. The transmitter is equipped with an HDMI loop-out for local monitoring or use with other distribution products. The receiver features digital optical output to break multi-channel audio out to amplifiers for a better listening experience. No EDID or EQ adjustments are necessary as the units automatically adjust for compatibility and gain. In addition, bi-directional IR pass-through allows for source and/or display control. For extending full 4K resolution with up to 60Hz, 4:4:4 chroma subsampling, and HDR10, with options for connecting additional displays and breaking out audio, the EVEX4K70 is a great plug and play solution for connecting the latest components!
The EVEX4K70 includes two units: transmitting unit (EVEX4K70-TX) and receiving unit (EVEX4K70-RX). The transmitting unit is used to capture the HDMI input with IR signals and carries the signals over a single Cat6 cable. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR signals.
*NOTE – All specifications and ratings for the EVEX4K70 have been tested and confirmed using Cat6 cabling. Cat6 or better is strongly recommended for optimum performance, achieve rated distance, and to maximize resolution capabilities of this product. Cat5e is not recommended and may not achieve distance and/or resolution expectations.
BZBGEAR 4K 18Gbps HDMI Extender with Bi-directional IR and Zero Latency up to 70m
The BG-EXH-70C 4K HDMI extender can transmit an uncompressed 4K@60Hz HDMI signal with zero latency at distances up to 70 meters. By utilizing a Cat6/6A/7 network cable this extender allows a signal to be transmitted farther than is possible using standard HDMI cables. Digital audio extraction for an external audio system can be done via the S/PDIF port and supports LPCM, DTS-HD, DTS-Audio, Dolby Digital, and Dolby TrueHD audio formats. The HDMI loop-out allows for an additional display on the transmitter side. Plug and play setup, bi-directional IR pass-through, and surge protection ensure easy setup, flexibility, and reliability.
BZBGEAR 4K 18Gbps HDMI Extender with Bi-directional IR over a Single Cat5e/6 up to 165ft
BG-EXH-50C provides 4K@60Hz (4:4:4) with HDR support extending your HDMI signal streaming at 18Gbps utilizing HDMI 2.0 ports along with HDCP 2.2. The Signal transmission can reach up to 165ft/50 meters via CAT5e/6 without any loss or degradation of video or audio quality.
The extender feature single direction IR and separation which considers source control and one HDMI circle yield. The unit also offers a convenient HDMI Loop out for a local display, HDMI Splitter or Switcher.
With so many valuable features, this HDMI Extender is a perfect choice for a variety of applications requiring signal extensions up to 165ft of distance as well the capability of powering either the Transmitter or Receiver for power over CAT5e/6.
Zigen HDBaseT Receiver over Single Cat5e/6/7 up to 100m for use with HX-88 and HX-1616 HDBaseT Modular Matrixes
Using HDBaseT technology, the ZIG-HVX-100R from ZIGEN extends an HDMI signal up to 100 meters using a single Ethernet cable. It also transmits bidirectional control signals for ultimate convenience. It can be used as a stand alone solution or combined with matrix switch setups to extend the input or output cable distance.
This HDMI extender supports resolutions up to 1080p and 4Kx2K Ultra HD. It supports simultaneous transmission of RS-232 and IR signals from a control system, enabling remote control of source devices or displays.
PureLink HDMI, RS-232, IR, ARC & Ethernet Receiver over HDBaseT with 3D, 4K Support
The PureLink HTR Rx HDMI, RS-232, IR, ARC & Ethernet Receiver over HDBaseT with 3D, 4K Support extends full HDMI signals up to 330ft with zero loss and zero noise delivery. It supports full, uncompressed video up to 4Kx2K @ 30Hz @ 48 bits.
PureLink HDMI, RS-232, IR, ARC & Ethernet Transmitter over HDBaseT with 3D, 4K
The PureLink HTR Tx HDMI, RS-232, IR, ARC & Ethernet Transmitter over HDBaseT with 3D, 4K Support extends full HDMI signals up to 330ft with zero loss and zero noise delivery. It supports full, uncompressed video up to 4Kx2K @ 30Hz @ 48 bits.