HDMI Over CATx Extenders
PureLink AV HDMI over IP Distribution System with PoE
Tired of being restricted by HDMI distance limitations in complex setups? Say goodbye to that frustration with the VIP-100 II HDMI over IP distribution system from PureLink AV. This transmitter can be combined with a compatible receiver to transmit over distances up to 364 feet, or 120 meters.
Get audio/video, RS-232 and IR extension coupled with matrix switching capability up to a 64x190 system to meet the needs of even the most complex and demanding setup. Point-to-many and many-to-point are also supported.
Transmitter Package Includes Receiver Package Includes Transmitter and Receiver Package Includes (1) VIP100H II Tx Transmitter (1) VIP100H II Rx Receiver (1) VIP100H II Tx Transmitter and (1) Rx Receiver (1) Infrared Receiver (1) Infrared Emitter (1) Infrared Receiver and (1) Infrared Emitter (1) Power Adapter (1) Power Adapter (2) Power Adapters Mounting Brackets Mounting Brackets Mounting Brackets (1) Remote Control (1) Remote Control Hardware Audio HDMI w/Embedded Audio Cable Category 5 UTP or Better Input Signal Types (Tx) HDMI v1.3, RS232; (Rx) RJ-45, H.264 UDP Multicast, RS232, IR Output Signal Types (Tx) RJ-45, H.264 UDP Multicast, RS232; (Rx) HDMI v1.3, RS232, IR Performance Supported Distance 394ft (120m) Data Transfer Rate 15Mbps (Typical) Supported Resolutions Up to 1080p (1920x1080) HDCP Compliance 1.3 RS-232 2400-115K Baud, User-Settable IR Extension Rx to Tx (38-56KHz) Connectors TX 2x HDMI 19 Pin Female, 1x RJ-45 Female (LAN), 1x Phoenix 3 Pin (RS232), 1x 1/8" Female (IR) RX 1x HDMI 19 Pin Female, 1x RJ-45 Female (LAN), 1x Phoenix 3 Pin (RS232), 1x 1/8" Female (IR) Power Input Power Requirements 5 VDC, 600mA Typical Power Adapter 120-240 VAC to 5 VDC, 1A PoE (Power Over Ethernet) 802.3af Dimensions and Weight Enclosure Type All Metal, Black Powder Coat Finish Dimensions 1.1 x 4.7 x 3.1" (29 x 120 x 79mm) Weight 0.61lbs (280g)
From $329.99 - $799.99
BZBGEAR 4K 18Gbps HDMI HDBaseT Extender with Bi-directional IR RS-232 and CEC up to 150M
The BG-EXH-150C is a cost-effective and reliable solution for long-range HDMI extension. It extends HDMI audio/video signals, RS-232, and bi-directional IR at distances up to 150 meters (490 feet) using a single category cable. It supports resolutions up to 4K2K@60Hz. One HDMI loop port is available for signal passthrough at the transmitter end. It also supports audio de-embedding via the 3.5mm connection on the receiver. Two-way IR pass-through allows for both source and display control. The slim design of the individual components allows them to easily be integrated to existing systems.
Vanco HDBT4K50 EXTENDER HDMI HDBASET HDCP2.2 4K/60Hz HDR 50M OVER 1-UTP w/POC w/IR
EXTENDER HDMI HDBASET HDCP2.2 4K/60Hz HDR 50M OVER 1-UTP w/POC w/IR
<!-- features -->
- Features the latest HDBaseT Technology, optimized for whole-home or commercial distribution of high definition signals at much greater distances of standard HDMI cables
- Transmission Range: Extends 4K@60Hz, 4:4:4 with HDR up to 164ft/50m over a single Cat5e/6 cable and 1080p@60Hz up to 230ft/70m
- Features Power over Cable technology (PoC) which transmits power over Cat5e/6, allowing for either Transmitter or Receiver to be powered without the use of a power supply
- Virtually Lossless Compression retains high end audio and video quality
- Bi-directional IR control
- Features Auto EDID and EQ Management for plug and play installation
- HDR Compatible
- HDCP 2.2 compliant and backward compatible to previous versions
- CEC Support
- Slim and compact design
- Power Supply: DC 12V, 2A
- Dimensions: 5.75” W x .7” H x 3.7” D
<!-- package -->
HDBT4K50 (TX & RX)
IR Transmitter (IR TX)
IR Receiver (IR RX)
(1) DC 12V Power Supply
PureLink HDMI, RS-232, IR, ARC & Ethernet Extender over HDBaseT with 3D, 4K
The PureLink HTR Tx/Rx HDMI, RS-232, IR, ARC & Ethernet Extender over HDBaseT with 3D, 4K Support extends full HDMI signals up to 330ft with zero loss and zero noise delivery. It supports full, uncompressed video up to 4Kx2K @ 30Hz @ 48 bits.
Zigen HDBaseT 18-GBPS HDMI Extender with Bi-Directional Power
18-GBPS HDMI Extender with Bi-Directional Power
The POC-100 is an innovative new product from Zigen supporting 4K/60Hz 4:4:4 HDMI 2.0, Bi-Directional IR, and RS232 extension over single UTP/STP cable. If the application does not need ARC support, but requires robustness and cost effectiveness, then the POC-100 is deal for all your residential HDMI distribution.
The ZIG-POC-100 is designed to be powered from either the Tx or Rx side. Ideal when cascading multiple extenders for longer reach or when powering from a particular side is not ideal.
Evolution HDMI KVM Extender 4K/60Hz HDR 230ft/70m
HDMI KVM Extender 4K/60Hz HDR 230ft/70m
The Evolution by Vanco EVEXKVM3 HDMI Extender over single Cat6 with Digital Audio Breakout, HDMI Loop-out, KVM, and PoE, extends 4K@60Hz, 4:4:4 Chroma, and HDR10 up to 230ft/70m. USB pass-through allows for controlling a security NVR/DVR, computer, NAS system, touch screen display, or other components that are controlled by USB with this extender. No need to run a separate line or extender just for USB control! Vanco’s patented bi-directional Power over Ethernet (PoE) Technology transmits power over Cat6, allowing either the Transmitter or Receiver to be powered without the use of a power supply for an easy installation. The transmitter is equipped with an HDMI loop-out for local monitoring or use with other distribution products. The receiver features digital optical output to break multi-channel audio out to amplifiers for a better listening experience. No EDID or EQ adjustments are necessary as the units automatically adjust for compatibility and gain. For extending full 4K resolution with up to 60Hz, 4:4:4 chroma subsampling, and HDR10, with options for connecting a keyboard, mouse, and other USB peripherals, the EVEXKVM3 is a great plug and play solution for connecting the latest components!
The EVEXKVM3 includes two units: transmitting unit (EVEXKVM3-TX) and receiving unit (EVEXKVM3-RX). The transmitting unit is used to capture the HDMI input with KVM signals and carries the signals via one cost effective Cat6 cable. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing KVM signals. The EVEXKVM3 offers the most convenient solution for HDMI extension over a single Cat6 with Power over Ethernet, and is the perfect solution for any application.
NOTE: – All specifications and ratings for the EVEXKVM3 have been tested and confirmed using Cat6 cabling. Cat6 or better is strongly recommended for optimum performance, achieve rated distance, and to maximize resolution capabilities of this product. Cat5e is not recommended and may not achieve distance and/or resolution expectations.