Your Cart

Free Shipping on Orders > $19.99 - *Some Exclusions May Apply

expand/collapse (704) 979-7100 (0)


On Sale $84.00

  • Quest 19 Inch Horizontal Power Strip - Black Product Image

    Quest HPS-E10A 19 Inch 10 Outlet Horizontal Power Strip

    Power strips are needed in any setup, it's just a fact of life. This particular necessity will work great for a networking setup, telecommunications installation, or as part of a terminal. It can be configured to a 19" rack and takes up only 1U (unit). There are 10 outlets with 2 in the front and 8 in the back for accessibility and a 15 Amp circuit breaker as a precaution to overload or short circuiting.

    19" racks are essentially the standard size that most racks come in, and since this rack is 19" itself, there is no surprise that it is configurable to a rack. It takes up only 1U on a rack so your monster server or patch panel can take up 5. Take your rack with you by having a power strip available when you need it.

    Certain cords aren't going to be removed very often; we're talking about power cords to the servers, monitors, patch panels, etc. Not only don't you want to remove them, but you likely don't want to see them, and so that is why there are outlets in the back; there are also outlets in the front. These front outlets allow you to quickly plug in a device (such as a diagnostic tool) to be used immediately where it is needed and then put it away. While simply having a power strip on a rack will allow you to do this, if all of the outlets were on the back it would be inconsiderate on the part of the designers to make you go back there and sift through cables and such.

    These devices are made to take on some excess voltage that may overload, short circuit, or otherwise damage the system via an overcurrent. The nice part of a circuit breaker is that once it has done its job you can simply reset the switch and it will serve you again.


  • Select Options

    12 Port CAT5E Patch Panel with Bracket

    Cat5E Patch Panel w/ Wall Mount Bracket Combo

    This combo includes both a Cat5E patch panel and a hinged wall mount bracket for an all-in-one solution.

    Return Policy

    This 12 port Cat5E patch panel combo with wall mount is backed by a 60-day money back guarantee. If you are not 100% satisfied with your purchase, contact us within 60 days so we can make it right!

    From $32.39 - $67.49

  • Kendall Howard 0004-1-002-01 Universal Wire Minder - above

    Kendall Howard 0004-1-002-01 Universal Wire Minder

    Cable Control

    Ever heard of Kendall Howard? Well, you have now. Kendall Howard is one of the top companies out in the rack mount market. They provide high-quality products at a great price. These items, in general, are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

    Today, you’re taking a gander at Kendal Howard’s Universal Wire Minder. This universal wire minder is great, compact cable management tool designed to be installed onto cage nut and tapped rails in wall cabinets, wall mount racks, Telco racks, and full-size server cabinets. Don’t feel that you are limited by this list, though! This cable minder can also be mounted on walls or furniture, so the possibilities are practically infinite.

    Let’s Have Some Specifics

    Made in the USA, this little wire minder is made from cold-rolled steel. It has been painted with a black powder coat finish for not only durability but also to allow it to easily blend in with most rack mounts.

    This wire minder has a 3 x 1.5-inch cable opening, giving you plenty of space to be able to run your cables through it. It is EIA 310-D compliant, so you know it is meeting the standards for rack mounts. Besides all this, it is able to be mounted in eight different positions. You are sure to be able to find a way to mount it to suit your needs!.

    With all of this and a limited lifetime warranty from the manufacturer, how can you possibly go wrong? You can't, and you know it! Get a few of these today to find out the possibilities they allow with your project. You are sure to be able to enjoy each one for years to come.


  • Kendall Howard 1902-1-001-01 Cable Routing Blank

    Kendall Howard 1902-1-001-01 1 Unit (1U) Cable Routing Blank

    Kendall Howard

    Kendall Howard is one of the top companies out in the rack mount market. They provide high quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

    The Kendall Howard 1U Cable Routing Blank provides the perfect way to route cables within a rack. With this simple device, cables can easily be managed within a cabinet, cutting back on time consuming maintenance as well as avoiding unwanted damage to cables and components.

    This 1U cable routing blank is 19” EIA compliant, so you can use it with nearly any rack mount solution that you plan to use. Cable routing panel can be installed to safely direct cables from left to right or front to back. Of course, we recommend you use Kendall Howard with this piece of equipment for best results! However, it is not required. As long as the dimensions match up, you’ll be perfectly fine.


    This cable routing blank comes with seven, large open cut-outs that provide ample room for routing various cables such as copper, fiber optic, telecom, and power cables. When you have smaller cable bundle installations, the use of the included tool-less clips makes installation easy with universal cage nut style rails. For heavier cable bundles the use of rack screws and cage nuts are recommended.

    As far as the cut-outs themselves, they come with rounded edges to allow for you to not have to worry about injury to yourself or equipment when installed. What possibly could you wish for more than this? Perhaps no injury to your wallet, I bet you’re saying. Well, this is FireFold. Of course your wallet will be feeling just fine afterwards!