$300 to $400

3C 18G STRD USHLD PVC JKT Bulk Control Cable, Reel-In-Box

1P 12G STRD USHLD PVC JKT Bulk Speaker Wire, Reel-In-Box

1P 16G STRD USHLD PVC JKT Bulk Speaker Wire, Reel-In-Box

4-ch 1-SATA Ultra 265/H.265/H.264 NVR

4-ch, 1 SATA interface, 4 PoE, Mini 1U, H.265&4K

4MP HD Intelligent LighterHunter IR Fixed Eyeball Network Camera

1/3" CMOS, ICR, 4MP (2688*1520), Max 30fps; 4MP (2560*1440), Max 30fps; 3MP (2304*1296), Max 25fps; 1080P (1920*1080), Max 30fps; Ultra 265/H.264/MJPEG, Triple streams ,DC12V & PoE, 120dB WDR, (2.8mm,4mm) fixed lens, IR range: up to 30m, Micro SD card slot?LightHunter: 0.003 Lux min. illumination

4K HD Vandal-resistant IR Fixed Dome Network Camera

1/2.7" CMOS, ICR, 3840x2160:20fps,Ultra 265/H.265/H.264/MJPEG, Triple stream, DC12V & PoE,Fixed lens 2.8mm,4mm, IR range: up to 30m. , 3-axis EasyStar: 0.005 Lux min. illumination

4K HD IR Fixed Eyeball Network Camera

1/2.7" CMOS, ICR, 3840x2160:20fps,Ultra 265/H.265/H.264/MJPEG, Triple stream, DC12V & PoE,Fixed lens 2.8mm,4mm, IR range: up to 30m. , 3-axis EasyStar: 0.005 Lux min. illumination

Universal Clamp for Thermal Strippers

Designed for use in conjunction with the TSAB-40 or TSFB-125 Thermal Strippers, this universal clamp is used to hold large diameter fibers in place for thermal stripping. It is also ideal for users who do not want to use a separate fiber holder.

Fiber Optic Cleaning Kit+

The Jonard Tools TK-287 Fiber Optic Connector Cleaning Kit+ offers cleaning products for use on connector end-faces and bulkhead adapters.

Fiber Optic Connector Cleaning Kit

The Jonard Tools TK-186 Fiber Optic Connector Cleaning Kit provides all the tools needed for cleaning of fiber connector end faces. This kit is a must have for any fiber optic technician.

Fiber Optic Connector Clean and Prep Kit, w/ Cleaver

The Jonard Tools TK-183 Fiber Optic Connector Clean and Prep Kit offers cleaning and preparation products for use on 1.25 mm and 2.5 mm connector end-faces and bulkhead adapters.

Fiber Prep Kit

Featuring our most popular slitting, ringing, stripping, and cutting tools, this Fiber Prep Kit provides a large array of tools needed to access and prepare fiber optic cables for termination.

Fiber Optic Mid Span Slit & Ring Tool Kit (1.2 mm-10 mm)

The TK-105 Fiber Optic Mid Span Slitting & Ringing Tool Kit provides an array of tools designed to provide easy access into fiber optic cables and buffer tubes.

Reference Point Locator

Designed with a precise signal transmitter and locator, this Reference Point Locator pinpoints the exact location to drill or cut through a wall, so no more guesswork.

Wall Mount Rack, Side Load - 8U

The Kendall Howard Side Load 8U Wall Mount Rack is an open frame rack with a twist...literally. The rack mounts sideways, allowing you to install equipment from side to side. This innovative concept not only allows you to install deeper equipment than most other wall mount racks, but you also have clear and easy access to the front and rear of the devices. With a weight capacity of up to 350 lbs., this side-loading wall rack is a great solution for servers, battery backups, and other heavy rackmount components.

• 20" fixed mounting depth
• 350 lb. weight capacity
• 19" EIA compliant
• Made in the USA
• Limited Lifetime Warranty

Shielded Riser 4C/18 AWG SBC, PVC Insulation, PVC Riser Jacket - 1000ft Spool

Applications:

Power limited fire alarm and communications cable for Riser and Non-Riser applications. Fire Alarm, Fire Protective Circuits, Smoke Detectors, Monitor/Detection, Signal, Control Circuits, Initiating Circuits, and Notification Circuits.

4C/18 AWG Solid FPLP Shielded Plenum Fire Alarm Cable - 1000ft Spool

Applications:

Power limited fire alarm and communications cable for Riser and Non-Riser applications. Fire Alarm, Fire Protective Circuits, Smoke Detectors, Monitor/Detection, Signal, Control Circuits, Initiating Circuits, and Notification Circuits.

2C/14 AWG Solid FPLR PVC Fire Alarm Cable - 1000ft Spool

Applications:

Power limited fire alarm and communications cable for Riser and Non-Riser applications. Fire Alarm, Fire Protective Circuits, Smoke Detectors, Monitor/Detection, Signal, Control Circuits, Initiating Circuits, and Notification Circuits.

2C/14 AWG Solid FPLR PVC Fire Alarm Cable - 1000ft Spool

The Structured Cable Products 14/2FPLR is a durable and dependable 14 AWG 2-conductor riser-rated fire alarm cable, ideal for use in vertical installations between floors in residential, commercial, and industrial buildings. Engineered to meet stringent fire safety codes, this cable delivers reliable performance for fire detection and alarm circuits.

The Structured Cable Products 14/2FPLR provides the safety, compliance, and performance demanded by modern fire protection systems—ideal for contractors and installers who need a trusted solution for riser applications.

Applications:

Power limited fire alarm and communications cable for Riser and Non-Riser applications. Fire Alarm, Fire Protective Circuits, Smoke Detectors, Monitor/Detection, Signal, Control Circuits, Initiating Circuits, and Notification Circuits.

USB 3.2 Type A Male to Female Active Optical Cable

A flexible solution for when a USB source needs to be extended. Ideal for video conferencing, education, digital signage, and more.

8K Thunderbolt™ 4 Docking Station

This Thunderbolt™ 4 Docking Station turns your Mac® or Windows® laptop into a full workstation with three Thunderbolt™ 4 outputs. Supports resolution up to dual display 4K or one display at 8K. Great for content creators, professionals, and enthusiast that require high resolution displays for the best visual experience.

With 96W Power Delivery, three USB™ 3.2 ports, and a USB-C® port, this docking station is perfect for your MacBook®, or Windows® laptop that support Thunderbolt™ 4 allowing you to add high-speed ports to your laptop. This Thunderbolt™ 4 docking station also has an RJ45 Gigabit Ethernet port, SD™ 4.0 memory card reader/writer, and combo audio jack for added flexibility.

All 11 ports are combined into one slim docking station, so you will have all the connections you need to stay productive!

System Requirements:

• Available Thunderbolt™ 4 port
• Compatibility:
  
  • MacBook Pro® 2016 and later
  • Surface Pro™ 8, Surface™ laptop studio
  • 2021 iMac® M1, 2019/2017 iMac®, iMac Pro®, 2021 iPad Pro® M1
  • Compatibility is not limited to just the devices listed above
  • Please refer to the manufacturer of your computer for more information about your device

Special Notes:

• An 8K-capable display is required for obtaining the 7680 x 4320 resolution
• If connected to a USB™ 3.2 host port or under, or if using a USB™ 3.2 host cable or under, performance or functionality may be limited

1×4 HDMI 2.0 Distribution Amplifier

The HDTools™ UHD2-140 HDMI 2.0 Distribution Amplifier provides a reliable Ultra HD/4K signal distribution solution with unique features to simplify and enhance integration. The UHD2-140 is designed to split a single HDMI input to four independent outputs providing complete 4K/60 (4:4:4) video distribution with support for HDR (High Dynamic Range) content and HDCP 2.2 compliance.

The UHD2-140 offers quick and easy plug-and-play installation for simplified operation without the need for programming or a control system. Using a dedicated IC chipset, the UHD2-140 features built-in equalization and re-clocking technology to distribute the highest quality video signals and Ultra HD content, making it ideal for use in home theater, presentation, and other multimedia applications.

19" Double Section Wallmount Cabinet

Flatpack, Black

Intellinet Network Solutions Double-Section wallmount cabinets offer you a flexible solution for your network installations. Since they ship flat-pack (unassembled)*, they save you space and money. High quality features include a 4MM toughened glass door and a cold-rolled galvanized steel. The rear door access to the back of the cabinet makes cabinet and component exchange a breeze.

19" Double Section Wallmount Cabinet

Flatpack, Black

Intellinet Network Solutions Double-Section wallmount cabinets offer you a flexible solution for your network installations. Since they ship flat-pack (unassembled)*, they save you space and money. High quality features include a 4MM toughened glass door and a cold-rolled galvanized steel. The rear door access to the back of the cabinet makes cabinet and component exchange a breeze.

SCP 1 Pair 24AWG Stranded, Twisted, And Shielded Cable

1 PAIR 24AWG STRANDED, TWISTED, AND SHIELDED CABLE NEC TYPE CM AND CEC YPTE CMG FT4.

STANDARD:

UL 444 Type (UL) CM, CMG/CL2 c(UL) EU RoHS 2011/65/EU Compliant.

COMPLIANCE / APPLICATION:

UL CM CL2/3, c(UL) FT4 75C; ANSI/TIA 568.2-D; RoHS.

MOFO™ Media Over Fiber Optic Cable - USB 3.1/2.0/1.1 Type A F to Type C - Plenum Rated

TechLogix MOFO™ USB cables leverage a true fiber core to deliver unparalleled speed, bandwidth and reliability. Pre-terminated connectors accommodate installations in seconds and the optical construction provides complete immunity to RF, EM and electrical interference. USBAC cables adapt USB type A connections to USB type C connections and extend SuperSpeed (10G) and Hi-Speed USB data up to 50m.

Techlogix Networx MOFO Media Over Fiber Optic Cable

TechLogix MOFO™ USB cables leverage a true fiber core to deliver unparalleled speed, bandwidth and reliability. Pre-terminated connectors accommodate installations in seconds and the optical construction provides complete immunity to RF, EM and electrical interference. Plus, MOFO™ cables are built with four strands of re-terminable multimode fiber allowing cable runs to be upgraded and re-purposed in the future.

Techlogix Networx MOFO Media Over Fiber Optic Cable

TechLogix MOFO™ DisplayPort cables leverage a true fiber core to deliver unparalleled speed, bandwidth, and reliability. Pre-terminated connectors accommodate installations in seconds and the optical construction provides complete immunity to RF, EM, and electrical interference. DP20 cables feature the native, uncompressed transmission of DisplayPort signals up to 100m without the need for external power supplies, boosters, or extenders. DP20 cables support VESA resolutions up to 40G 8K.

Intellinet 24-Port Gigabit Ethernet PoE+ Switch

IEEE 802.3at/af (PoE+/PoE) Compliant, PoE Power Budget of 370 W, Two 1G SFP Open Slots, 19" Rackmount

Unmanaged PoE Switch with 26 ports - 24 RJ45 and Two SFP, High-Power PoE+

The Intellinet Network Solutions 24-Port Gigabit Ethernet PoE+ Switch with 2 SFP Ports passes both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with 24 Gigabit Ethernet ports, this switch can power wireless LAN access points and bridges, VoIP phones, IP video cameras and more while delivering network speeds up to 1,000 Mbps.

Power over Ethernet 802.3at

This high-powered switch supports the IEEE 802.3at protocol and can inject up to 30 watts of power per port. IEEE802.3af- or IEEE802.3at-compliant devices attached to the switch need no additional power to help avoid the time and expense of electrical rewiring and minimize the unsightly clutter of power supplies and adapters on ceilings and walls. Any mix of PoE and non-PoE devices is supported, and thanks to its short-circuit, overload and high-voltage protection function, your equipment is well-protected. For devices that are not 802.3at/af compliant (legacy wireless access points or network cameras), we suggest the use of an Intellinet Network Solutions PoE/PoE+ Splitter.

Eliminate Bottlenecks with 26 Gigabit Ports

Equipped with 24 auto-sensing 10/100/1000 Mbps RJ45 Gigabit Ethernet ports, this switch offers plenty of performance for your computers, servers and other networking devices. In addition, two small form-factor pluggable (SFP) GBIC module slots provide fiber connectivity for greater distances. These are not shared combo-ports but true Gigabit ports, pushing the total available bandwidth up to 52 Gbps.

24-Port Gigabit Ethernet PoE+ Web-Managed Switch with 2 SFP Ports

24 x PoE ports, IEEE 802.3at/af Power over Ethernet (PoE+/PoE), 2 x SFP, Endspan, 19" Rackmount

Save installation time and money with Power over Ethernet.

The Intellinet Network Solutions 24-Port Gigabit Ethernet PoE+ Web-Managed Switch with 2 SFP Ports (560559) is designed to pass both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with 24 Gigabit Ethernet ports, all of which support 802.3at/af Power over Ethernet (PoE/PoE+), this switch can power Wireless LAN access points and bridges, VoIP (Voice over Internet Protocol) telephones, IP surveillance cameras and more while delivering network speeds of up to 1000 Mbps.

Self-Healing Network with increased reliability and stability - Intellinet Powered Device Monitor (PDM)

This Power over Ethernet switch is equipped with Powered Device Monitoring, a self-healing PoE function. This PoE watchdog performs a PD alive check to all connected PDs and automatically resets unresponsive devices, such as PoE security surveillance cameras, by cutting off and then restoring power. The PDM function is especially useful in applications where connected devices are critical to network operation, such as in industrial or surveillance settings. As an added benefit, the PD Alive function helps eliminate unnecessary technical support calls and costly field trips by field-support engineers because the functional reboot can often bring the unresponsive device back online.

Power over Ethernet 802.3at

The Intellinet Network Solutions 24-Port Gigabit Ethernet PoE+ Web-Managed Switch with 2 SFP Ports supports the IEEE 802.3at protocol and is designed to inject up to 30 watts of power per port*. IEEE802.3af or IEEE802.3at compliant devices attached to the switch require no additional power, thus eliminating the time and expense of electrical rewiring and minimizing the unsightly clutter caused by power supplies and adapters in awkward places such as ceilings and walls. Any mix of PoE and non-PoE devices is supported, and thanks to its short circuit, overload and high-voltage protection function, your equipment is well-protected. For devices that are not 802.3at/af compliant (legacy wireless access points or network cameras), we suggest the use of an Intellinet Network Solutions PoE/PoE+ Splitter.

Eliminate Bottlenecks with Gigabit Speeds

Equipped with 24 auto-sensing 10/100/1000 Mbps RJ45 Gigabit Ethernet ports, the 24-Port Gigabit Ethernet PoE+ Web-Managed Switch with 2 SFP Ports offers plenty of performance for your computers, servers and other networking devices. In addition, two small form-factor pluggable GBIC module slots (SFP) provide fiber connectivity for greater distances.

Web-Management

This PoE switch is equipped with an impressive array of advanced management functions that allow you to be in full control over your network. The 24-Port Gigabit Ethernet PoE+ Web-Managed Switch with 2 SFP Ports supports VLAN, port aggregation, QoS, port mirroring, SNMP V1 and the popular SNMP V2c, just to name a few.

* Total PoE budget for this switch is 240 watts. Per-port average power distribution is 10 watts; maximum per-port power usage cannot exceed 30 watts.

Intellinet Gigabit Ethernet PoE+ Switch 24-Port

IEEE 802.3at/af (PoE+/PoE) Compliant, PoE Power Budget of 370 W, Four 10G SFP+ Open Slots, 19" Rackmount

Robust 24-Port 370 W PoE+ Switch with 4 x 10G Uplinks - the new backbone for your video surveillance and more

The 24-Port Gigabit Ethernet PoE+ Switch with Four 10G SFP+ Uplinks from Intellinet Network Solutions can pass both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with a PoE power budget of 370 watts and 24 Gigabit Ethernet ports, all of which support 802.3at/af Power over Ethernet (PoE/PoE+), this switch can power IP surveillance cameras, wireless LAN access points and bridges, VoIP (Voice over Internet Protocol) telephones and more while providing a total switching capacity of 128 Gbps for your network.

Power over Ethernet 802.3at

Supporting the IEEE 802.3at protocol, this switch can inject up to 30 watts of power per port. IEEE802.3af or IEEE802.3at compliant devices attached to the switch require no additional power, thus eliminating the time and expense of electrical rewiring and minimizing the unsightly clutter caused by power supplies and adapters in awkward places such as ceilings and walls. Any mix of PoE and non-PoE devices is supported, and thanks to its short circuit, overload and high-voltage protection function, your equipment is well-protected. For devices that are not 802.3at/af compliant (legacy wireless access points or network cameras), we suggest the use of an Intellinet Network Solutions PoE/PoE+ Splitter.

Eliminate Bottlenecks with Gigabit Speeds

Equipped with 24 auto-sensing 10/100/1000 Mbps RJ45 Gigabit Ethernet ports, it offers plenty of performance for your computers, servers and other networking devices.

Future-Proof with 10 Gigabit Ethernet (IEEE 802.3ae)

Equipped with four 10G SFP+ open slots, this switch is the ideal solution for cost-sensitive organizations considering 10 Gigabit Ethernet. With 10G technology going mainstream and becoming ever more popular, the need for additional bandwidth has become more urgent than ever before - even in smaller networks. Whether you wish to connect servers, network attached storage units or NVRs at 10 Gbps, or perhaps you simply want to connect to another gigabit switch without resorting to LACP techniques, 10G provides the solution. And in case you are not quite ready for 10G just yet, it will happily take standard 1G SFP transceiver modules until the time is right for you to make the switch.

HDMI® 1×3 Splitter over Cat5e/Cat6 Cable

The Evolution EVSP1013 is a HDMI splitter that allows for 1 HDMI input to be split and sent to 4 different displays. The 3-UTP output ports can connect to the EVRX2006 POE receiver (sold Separately) over Cat5e/6 cable to transmit 1080p60 video with audio and control up to 50m. The single HDMI output can be used for a local display or cascaded into another splitter for an even larger distribution system. It supports 20k - 60K wideband bi-direction IR communication and dynamic or manual EDID management. The user can manually select the best compatible EDID or automatically blend EDID of 4 connected HDMI sinks. It also provides power over the Cat5e/6 so that the EVRX2006 do not require a power supply.

Compatible Receiver: EVRX2006 

Tech Support Tips:

• With recent changes to many new source and display components, we have updated the EVSP1013, EVSP1017, and EVRX2006 to improve compatibility. There are now “2nd Generation” versions of each of these products for improved compatibility

• Ensure that both the splitter(s) (EVSP1013 and EVSP1017) and receiver(s) (EVRX2006) match generation versions. For example, if using a “2nd Generation” splitter, a “2nd Generation” EVRX2006 receiver must be used. All “2nd Generation” Products are marked as such on the product and box. If no version or version number is listed, this would be a “1st Generation” unit

RapcoHorizon 1-Inout & 8-Output Press Box

The PB-8 press box is perfect for press conferences or any situation requiring a single mic signal to be "split" multiple times. Its features include a rugged steel box, a single XLR female mic level source input, a "loop" output (to go to a mixing console to interface with an external phantom power supply, or to "daisy chain" this unit to a second PB-8 for additional isolated outputs), and eight discrete isolated XLR male outputs. Due to the D.C. blocking characteristics of a transformer, the isolated outputs will not pass phantom power. The connectors are recessed to resist damage.

Jonard Tools Fiber Optic Light Source

Designed to provide either 1310 nm or 1550 nm wavelengths, this optical light source is the perfect tool for providing a stable light source for single-mode fiber measurements.

SCP 2 RU Rack Mount Fiber Enclosure Unloaded

The 2RU rack tray features three LGX-118 compatible panel slots for fiber optic couplers and adapters. Its steel construction provides strength and durability, and its removable top panel, hinged front panel, and slide-out wiring tray simplify installations.

The tray mounts in a standard 2RU space.

Vertical Cable Wall Mount Enclosure

Single Mode SCP-EasyFiber™ with Corning® SMF-28® Ultra OS2 9/125

EF-OS2R-DUP-YL - Duplex Zip OS2 Riser Bend Insensitive SCP-EasyFiber™ w/Corning® SMF-28® Ultra - Duplex Zip Single Mode OS2 9/125, 2.0mm, UL Riser OFNR, Yellow Jacket, 2000ft/610m Reel In Box

SCP-EasyFiber™ Single Mode OS2 Cables - OS2 9/125, UL Riser OFNR

SCP-EasyFiber™ Single Mode with Corning® SMF-28® Ultra delivers the best installation and macrobending performance for Single Mode fiber. SCP-EasyFiber™ Single Mode is a full-spectrum single mode fiber that experiences virtually no signal loss in tight bends and challenging cable routes. Installs "Like Copper"; Saves on Installation Costs. Compatible with conventional industry equipment & standards. Indoor/Outdoor - Plenum OFNP; Riser OFNR; and LSZH EN50575 EuroClass Dca-s1,d1,a1 (EU only).

Part No. Explanation: EF= SCP-EasyFiber™ with special Corning Glass Fibers (Higher Performing and Bend Insensitive); DUP= Duplex (2 Strand Siamese Side x Side); SIMPLEX= 1 Fiber Strand; DIST= Tight Buffered Distribution Cable (Fiber strands inside Overall Jacket); Drop= Rugged Simplex Indoor/Outdoor; OS2= Single Mode 9/125; P= Plenum OFNP; OFNP= Optical Fiber Non-Conductive Plenum; LSZH= Low Smoke Zero

Multimode SCP EasyFiber™ with Corning® ClearCurve® OM3 50/125

EF-OM3R-XXDIST-AQ - OM3 Riser Bend Insensitive SCP-EasyFiber™ w/Corning® ClearCurve® - 6 Strand Tight Buffered Distribution, Aqua Jacket, Reel in Box

SCP-EasyFiber™ Multimode OM3 50/125, 10G - UL Riser OFNR

SCP-EasyFiber™ with Corning ® ClearCurve ® is a premium Ultra-Bendable and Laser-Optimized ® multimode fiber designed to withstand tight bends and challenging cable routes with substantially less signal loss than conventional multimode fiber cables. Installs "Like Copper" & Saves on Installation Costs. SCP-EasyFiber™ is compatible with industry conventional fiber equipment & standards. Indoor/Outdoor - Plenum OFNP; Riser OFNR; and LSZH EN50575 EuroClass Dca-s1,d1,a1 (EU only).

Part No. Explanation: EF= SCP-EasyFiber; DUP= Duplex (2 Strand Siamese Side x Side, Shotgun); DIST= Tight Buffered Distribution Cable (Fiber strands inside Overall Jacket); OM3= OM3 Rated 50/125 Multimode; P= Plenum; OFNP= Optical Fiber Non-Conductive Plenum; R= Riser; OFNR= Optical Fiber Non-Conductive Riser; LSZH= Low Smoke Zero Halogen EN50575 EuroClass Dca-s1,d1,a1

Shuttle Palm-sized 4K Capable PC With New Whiskey Lake

The NC10U series is a palm-sized, 4K capable and low-power PC with the new Intel Whiskey Lake-U processor. A selection of Intel 8th generation ULV processors not only provides higher performance but also affords minimal power consumption. Room for up to 64 GB of DDR4 RAM allows you to increase system performance easily. Built-in HDMI 2.0a and DisplayPort outputs added the ability to drive dual 4K UHD displays. Despite its tiny body of 0.8 liters, the NC10U series still packs excellent connectivity – USB 3.2 Gen1, USB 2.0, RS232, M.2, SATA 6Gbps, Giga LAN and WiFi module. Besides, one 2.5" drive as well as one M.2 SSD card can be installed. Perfect for a variety of uses in Home/Work PC, HTPC, and Digital Signage.

Operating System Support

• Windows 11 64bit
• Windows 10 64bit
• Linux

LINIER® Swing-Out Wall Mount Cabinet - Solid Door

The LINIER® Swing-Out Cabinets are designed to solve the everyday problems technicians have while installing and managing the immense amount of cabling that is all-too-common with datacom and telecom equipment. Don't work around the rack... get a rack that works around you!

• Includes one locking solid door
• Locking side panels
• 150 lb. weight capacity
• One set of cage nut style mounting rails
• 90 degree swing-out
• Mounting depth: 22.5"
• 19" EIA compliant
• Made in the USA
• 5-Year Limited Warranty

Kendall Howard 2-Post Relay Rack

Whether working with a wiring closet, telecom room, or data center, the Kendall Howard 2-Post Relay Rack is the ideal racking solution. Its sturdy construction makes a rigid, reliable rack that can hold up to 800 lbs. of equipment, including switches, patch panels, UPS’s, rack shelves, rackmount keyboard trays, and more. The rack features four ¼-20 x 0.5” grounding studs on the inside of the rails that allow you to ground your equipment directly to those studs. Also included with the rack are serrated tooth washers that, when tightened, dig in and remove paint from the rack, establishing electrical continuity throughout the rack. When multiple 2-Post Relay Racks are needed, simply gang them together with the ganging holes on both sides of the frame. You can even gang both the 24U and 45U size racks together because the holes align. Cable pass-through slots are also included on the frames to allow cabling to pass through between racks. The completely open-top design allows the 2-Post Relay Rack to accept cable bundles. It also makes the rack compatible with most ladder racks and coordinating accessories. When you need a 2-post rack that offers both strength and dependability, there is none other than the 2-Post Relay Rack.

• 10-32 tapped rails
• Gangable
• Ships knocked down

Kendall Howard 1U Rackmount 4-Post Keyboard Tray

Commercial, military, aerospace, corporate, and small office applications alike, the Kendall Howard Rackmount Keyboard Tray will complement them all. This heavy-duty design is one of the most robust pull-out keyboard trays on the market. Don't be fooled by its sleek, low-profile appearance. This keyboard tray was built to last. The keyboard and touchpad mouse simply slide out when needed to provide quick and easy access to your network.

• Slim 1U design
• Lockable
• 4-post mounting
• 19" EIA compliant
• Made in the USA
• 1-Year Limited Warranty

Kendall Howard 10-32 Rack Screws with Washers - 2500 Pack

All Kendall Howard 10-32 Rack Screws have a pilot point that helps prevent cross threading and guide the screw when being installed. Kendall Howard rack screws are cold forged and have a black oxide with wax finsh. These truss head screws are .75 inches long and install with any Phillips screw driver or bit.

2.0 HDBaseT POC Receiver IR, RS-232

The Evolution by Vanco EVRXHD2 4K HDR HDBaseT™ Receiver with POC and Bi-directional IR, allows extension of 4K@60Hz, 4:4:4 Chroma Subsampling, and HDR up to 131ft/40m and 1080p up to 230ft/70m over a single Cat6 cable. PoC (Power over Cable) allows the EVRXHD2 to be powered over Cat6 from the matrix unit. Features IR pass-through to be able to control either sources and/or displays. The EVRXHD2 is compatible with the Evolution EVMX4X3, EVMX8X6, EVMX44PRO, and EVMX88PRO matrix units.

Need more options for audio, control, and scaling ability? The EVRXDSC receiver has all the same features as the EVRXHD2 plus more, including RS-232 pass-through, ARC, audio extraction, and downscaling. Both receivers can be mixed and matched with compatible Evolution matrix units, resulting in a flexible and modular matrix switching system for any application!

Be able to bring your USB devices where you need them with our BZB USB 3.0 active optical cable. Our USB Type-A Male to Type-A Female cable adheres to USB 3.0 standards by offering transfer speeds of up to 5 Gb/s. It features full shielding for error-free data transmissions, over-current protection, and supports UASP functionality with Windows 10, 8, and USB 3.0 hosts. Using optical fiber to replace copper wire as the high-speed signal transmission medium offers better signal quality without the need for external power for USB 3.0 speeds. Daisy chaining this cable is not supported.

The BG-DA-12GS1x2 is a compact 1x2 SDI Splitter. It features 2 separately buffered and re-clocked outputs to help eliminate jitter and extend transmission distances. It provides automatic input cable equalization up to 180m (3G), 100m (6G), or 70m (12G). LED indicators show signal lock and current video rate, and the inter-locked power supply ensures you always have a solid connection.

BZBGEAR BG-BPTZ camera combines a high-quality lens with an advanced ISP processing algorithm to provide high-quality video and smooth motion. BG-BPTZ supports H.264/H.265 encoding, which keeps motion video fluid and clear even under low bandwidth conditions.
BG-BPTZ is ideal for any meeting spaces and conference rooms. It offers simple, clean connectivity from the back of the camera to PCs at the meeting table. The camera is universally compatible with any PC using the standard USB video driver.
The BG-BPTZ is ideal for distance learning and collaboration, as well as recording lectures.

MOFO™ Media Over Fiber Optic cable -- USB 3.0/2.0/1.1 M to F -- plenum rated

TechLogix MOFO™ USB cables leverage a true fiber core to deliver unparalleled speed, bandwidth and reliability. Pre-terminated connectors accommodate installations in seconds and the optical construction provides complete immunity to RF, EM and electrical interference. Plus, MOFO™ cables are built with four strands of re-terminable multimode fiber allowing cable runs to be upgraded and re-purposed in the future.