$300 to $400

Wavenet 4-Post 45U Adjustable Open Frame Rack

The 4-Post Rack is compatible with all industry standard 19” wide  mounting equipment. This 45U adjustable mounting depth measures from 22” to 36” and is ideal for small-to-medium sized installations.

Standards Compliance

• ANSI/EIA RS-310D
  
• IEC 60297-3-100
  
• RoHS

Strong and Versatile

The Middle Atlantic RLA19 19" Open Frame Rack has a versatile range of applications and is ideal for mounting deep components. With a 15" deep heavy duty aluminum base, you can easily secure the mount to any floor. The Middle Atlantic RLA19 rack can hold up to 1600lbs of heavy equipment.

Kendall Howard 2-Post Relay Rack

Whether working with a wiring closet, telecom room, or data center, the Kendall Howard 2-Post Relay Rack is the ideal racking solution. Its sturdy construction makes a rigid, reliable rack that can hold up to 800 lbs. of equipment, including switches, patch panels, UPS’s, rack shelves, rackmount keyboard trays, and more. The rack features four ¼-20 x 0.5” grounding studs on the inside of the rails that allow you to ground your equipment directly to those studs. Also included with the rack are serrated tooth washers that, when tightened, dig in and remove paint from the rack, establishing electrical continuity throughout the rack. When multiple 2-Post Relay Racks are needed, simply gang them together with the ganging holes on both sides of the frame. You can even gang both the 24U and 45U size racks together because the holes align. Cable pass-through slots are also included on the frames to allow cabling to pass through between racks. The completely open-top design allows the 2-Post Relay Rack to accept cable bundles. It also makes the rack compatible with most ladder racks and coordinating accessories. When you need a 2-post rack that offers both strength and dependability, there is none other than the 2-Post Relay Rack.

• 10-32 tapped rails
• Gangable
• Ships knocked down

The Middle Atlantic PCD Series provides a cost-effective solution to routing and organizing your networking cables throughout your open rack.

The PCD Series is available in multiple rack units and sizes designed to fit any application. It is also available in single duct sections designed to work on one side of your rack.

4-Post Adjustable Rack

Note: This product has been discontinued.

For an adjustable 4-point solution ideal for data centers and wiring closets, go with the 4-Post Adjustable Rack. Its usable depth can adjust from 26” to 38” so you’re not left with a fixed depth. To adjust the depth, simply move each bracket to your desired depth and secure the hardware in place. If you need a larger solution, gang multiple 4-Post Adjustable Racks together by using the ganging holes found on each side. You can even gang both the 24U and 45U size racks together because the holes align. For installations that require connections be made above the rack, such as trunk cabling or ladder racks, simply go through the completely open frame at the top. The 4-Post Adjustable Rack features eight ¼-20 x 0.5” grounding studs on the inside of the four rails that allow you to ground your equipment directly to those studs. Also included with the rack are serrated tooth washers that, when tightened, dig in and remove paint from the rack, establishing electrical continuity throughout the rack. With its strength, durability, and adjustability the 4-Post Adjustable Rack is a sure fit for your next installation.

• Adjustable usable depth from 26” to 38”
• 10-32 tapped rails
• Ships knocked down in one box
• Gangable