$100 to $200

Positioning Strap 5' 8" L, 5" Hook

Note:This product has been discontinued.

Klein's positioning straps work with Klein's climbing equipment for linemen. Made with exceptionally strong and long-lasting Klein-Kord, the straps are adjustable within a 1'10" range. Features an adjustable buckle and two locking snap-hooks.

Positioning Strap 8 ft with 5" Hook

Note:This product has been discontinued.

Klein's positioning straps work with Klein's climbing equipment for linemen. Made with exceptionally strong and long-lasting Klein-Kord, the straps are adjustable within a 2'6" range. Features an adjustable buckle and two locking snap-hooks.

Positioning Strap 7 ft with 5" Hook

Note: this product has been discontinued.

Klein's positioning straps work with Klein's climbing equipment for linemen. Made with exceptionally strong and long-lasting Klein-Kord, the straps are adjustable within a 2'6" range. Features an adjustable buckle and two locking snap-hooks.

Positioning Strap 6 ft with 5" Hook

Note: This product has been discontinued.

Klein's positioning straps work with Klein's climbing equipment for linemen. Made with exceptionally strong and long-lasting Klein-Kord, the straps are adjustable within a 2' range. Features an adjustable buckle and two locking snap-hooks.

Positioning Strap 6' 6" L, 5" Hook

Note: This product has been discontinued.

Klein's positioning straps work with Klein's climbing equipment for linemen. Made with exceptionally strong and long-lasting Klein-Kord, the straps are adjustable within a 2'3" range. The drop-forged, single tongue adjustment buckle has a corrosion-resistant finish. Depending on the application, choose a positioning strap that allows you to work at arm's length from the pole or other positioning anchorage.

Block w/Eye and Nose Over Keeper

This block features an eye to splice line to block and rope tie-off. Made of light galvanized steel and aluminum alloy. The sheaves have bronze bushings for long life.

Block

Pliers, Insulated, Diag Cut, 7" L

9" Insulated Side Cutting Pliers

Pliers, Insulated, HD, Diag Cut, 8"

Techlogix Networx TL-SMG-PT Share-Me Table Insert

Note: This product has been discontinued.

We’ve all experienced it…you walk into a meeting room and there are cables all over the place… a couple on the table, a couple under the table, maybe one dangling from the projector or display. You place your laptop on the conference room table and ask, “Which cable do I use to connect my presentation?” Your colleague just stares back blankly… Great, this meeting is off to a wonderful start…

The problem is exacerbated when you have multiple people all trying to share content. A poorly implemented meeting room that is difficult for one presenter to use efficiently is near impossible for multiple participants. Enter TechLogix…

TechLogix Share-Me™ Series table inserts redefine the usability, versatility, and cost of huddle room, meeting room, and classroom collaboration. When paired with a compatible presentation switcher, the Share-Me™ Series system provides both AV switching and display control for the cost of most 40" displays.

Table inserts provide connectivity for sources such as laptops and tablets, as well as display on/off and source selection control that is simple enough for any user to understand with virtually no training. With just one of two simple buttons, anybody using the room can turn on and off the display. The other button is the Share-Me™ button which immediately switches to the input on that specific grommet.

Techlogix Networx TL-SMG-4C Share-Me Table insert

Note: This product has been discontinued.

The TL-SMG-4C is a table-mounted controller that is compatible with TechLogix Share-Me™ switchers (TL-SM3C-HD and TL-SM3C-HDV). It adds volume, mute, and display control to a Share-Me™ system.

Simply install the TL-SMG-4C into your conference table, then connect it to the Share-Me™ switcher using the included cable. The buttons will automatically control the display to which you are connected... no programming or configuration needed!

Compatible switchers use CEC protocol (by default), which is standard on most consumer-grade flat panel displays. Other displays like commercial LCD's or projectors can be controlled by IR or RS232, which is easily configured from the Share-Me™ switcher's web page.

Alternatively, the TL-SMG-4CP (with power supply) can be used as a standalone controller that can be connected directly to your display, giving you all the controls you need without expensive touchpanels or programming.

Techlogix Networx TL-SMG-2B Share-Me Table Insert

Note: This product has been discontinued.

We’ve all experienced it…you walk into a meeting room and there are cables all over the place… a couple on the table, a couple under the table, maybe one dangling from the projector or display. You place your laptop on the conference room table and ask, “which cable do I use to connect my presentation?” Your colleague just stares back blankly… Great, this meeting is off to a wonderful start…

The problem is exacerbated when you have multiple people all trying to share content. A poorly implemented meeting room that is difficult for one presenter to use efficiently is near impossible for multiple participants. Enter TechLogix…

TechLogix Share-Me™ Series table inserts redefine the usability, versatility and cost of huddle room, meeting room and classroom collaboration. When paired with a compatible presentation switcher, the Share-Me™ Series system provides both AV switching and display control for the cost of most 40" displays.

Table inserts provide connectivity for sources such as laptops and tablets, as well as display on/off and source selection control that is simple enough for any user to understand with virtually no training. With just one of two simple buttons, anybody using the room can turn on and off the display. The other button is the Share-Me™ button which immediately switches to the input on that specific grommet.

Techlogix Networx TL-SMG-VGA Share-Me VGA & control table insert

Note: This product has been discontinued.

The TL-SMG-VGA table insert is the perfect complement to TechLogix Share-Me switchers. Not only does it provide a local VGA connection, but it also provides intuitive control for input switching and display on/off.

Paired with a Share-Me switcher, the TL-SMG-VGA creates a high-quality, inexpensive control and signal management system that anyone can understand.

The unit includes an under-table mounting bracket that locks the insert securely to any flat surface.

Techlogix Networx Share-Me HDMI & Control Table Insert

Note: This product has been discontinued.

The TL-SMG-HD table insert is the perfect complement to TechLogix Share-Me switchers. Not only does it provide a local HDMI connection, but it also provides intuitive control for input switching and display on/off.

Paired with a Share-Me switcher, the TL-SMG-HD creates a high-quality, inexpensive control and signal management system that anyone can understand.

The unit includes an under-table mounting bracket that locks the insert securely to any flat surface.

Techlogix Networx Share-Me DisplayPort & Control Table Insert

Note: This product has been discontinued.

The TL-SMG-DP table insert is the perfect complement to TechLogix Share-Me switchers. Not only does it provide a local DisplayPort connection, but it also provides intuitive control for input switching and display on/off.

Paired with a Share-Me switcher, the TL-SMG-DP creates a high-quality, inexpensive control and signal management system that anyone can understand.

The unit includes an under-table mounting bracket that locks the insert securely to any flat surface.

Techlogix Networx VGA & Stereo Audio Pass-Through Table Insert

Note: This product has been discontinued.

Keyboards, mouses, laptop chargers, cell chargers, USB hubs, phones, AV cables... We get it - you've got a 'peripheral nest' on top of your conference table. Wouldn't it be great if there was any easy way to clean all this up? Enter the TL-TI series from TechLogix Networx.

The TL-TI line of table inserts replace clunky pop-up boxes with compact grommets which mount in standard 2.25” furniture holes. From video passthrough to active electronics, these table inserts provide a connection point for all the peripherals you use in your meeting rooms.

Techlogix Networx USB & Stereo Audio Pass-Through Table Insert

Note: This product has been discontinued.

Keyboards, mouses, laptop chargers, cell chargers, USB hubs, phones, AV cables... We get it - you've got a 'peripheral nest' on top of your conference table. Wouldn't it be great if there was any easy way to clean all this up? Enter the TL-TI series from TechLogix Networx.

The TL-TI line of table inserts replaces clunky pop-up boxes with compact grommets which mount in standard 2.25” furniture holes. From video passthrough to active electronics, these table inserts provide a connection point for all the peripherals you use in your meeting rooms.

Techlogix Networx TL-TI-PUSB 6 Port USB Charging Table Insert

Note: This product has been discontinued.

Keyboards, mouses, laptop chargers, cell chargers, USB hubs, phones, AV cables... We get it - you've got a 'peripheral nest' on top of your conference table. Wouldn't it be great if there was any easy way to clean all this up? Enter the TL-TI series from TechLogix Networx.

The TL-TI line of table inserts replace clunky pop-up boxes with compact grommets which mount in standard 2.25” furniture holes. From video passthrough to active electronics, these table inserts provide a connection point for all the peripherals you use in your meeting rooms.

Techlogix Networx TL-TI-DP DisplayPort pass-through table insert

Note: This product has been discontinued.

Keyboards, mouses, laptop chargers, cell chargers, USB hubs, phones, AV cables... We get it - you've got a 'peripheral nest' on top of your conference table. Wouldn't it be great if there was any easy way to clean all this up? Enter the TL-TI series from TechLogix Networx.

The TL-TI line of table inserts replace clunky pop-up boxes with compact grommets which mount in standard 2.25” furniture holes. From video passthrough to active electronics, these table inserts provide a connection point for all the peripherals you use in your meeting rooms.

Techlogix Networx TL-SMG-PUN Share-Me Power Table Insert

Note: This product has been discontinued.

We’ve all experienced it…you walk into a meeting room and there are cables all over the place… a couple on the table, a couple under the table, maybe one dangling from the projector or display. You place your laptop on the conference room table and ask, “which cable do I use to connect my presentation?” Your colleague just stares back blankly… Great, this meeting is off to a wonderful start…

The problem is exacerbated when you have multiple people all trying to share content. A poorly implemented meeting room that is difficult for one presenter to use efficiently is near impossible for multiple participants. Enter TechLogix…

TechLogix SM Series table inserts redefine the usability, versatility and cost of huddle room, meeting room and classroom collaboration. When paired with a compatible presentation switcher, the SM Series system provides both AV switching and display control for the cost of most 40" displays.

Table inserts are available for HDMI, VGA and DisplayPort source devices, providing connectivity for sources such as laptops and tablets, as well as display on/off and source selection control that is simple enough for any user to understand with virtually no training.

Simply put, an entire meeting can be run with only two buttons: an "on/off" button which turns the switcher and the display on or off, and a "show-me" button which switches the active input channel to the table insert on which the button was pressed.

The system also features automatic switching for sources that are not connected to the table inserts, such as media players, fixed PCs, or document cameras. When a source is connected and/or powered on, the system will recognize the input and automatically switch to that channel.

The TechLogix SM Series is also designed for an extremely quick installation. Simply mount the switcher under the podium or conference room table, mount the table inserts in pre-cut holes sized from 36mm through 60mm, and connect the table inserts to the switcher using standard AV cables (HDMI, DisplayPort, or VGA) and a 3.5mm cable. All power and control commands are sent from the table inserts to the switcher via the 3.5mm cable, and all display on/off commands are sent from the switcher to the display via CEC over an HDMI cable.

Techlogix Networx TL-SMG-PAC Share-Me US AC Power table insert

Note: This product has been discontinued.

TL-SMG-PAC table insert is the perfect complement to TechLogix TL-SM3X1 switchers. This unit provides local AC Power source.

Essentially, the TL-SMG-PAC, TL-SM3X1 with the options of TL-SMG-HD, TL-SMG-DP or TL-SMg-VGA system is a high-quality, inexpensive control and signal management system that anyone can understand.

The unit includes an under-table mounting bracket that locks the insert securely to any flat surface.

Techlogix  Shielded Twisted Pair Cable Extender

Note: This product has been discontinued.

HDMI cables are great for transmitting audio and video signals short distances, but larger buildings and larger rooms often need electronics inline to ensure signal performance. Simply pulling a long HDMI cable or connecting multiple HDMI cables together can cause signal drop out, interference, pixelization and a host of other signal and performance problems.

The TL-TP70-HDIR replaces a traditional HDMI cable with active electronics designed specifically for sending video signals up to 230 feet. Plus, built-in IR control signal embedding allow you to also transmit bi-directional IR commands with the HDMI stream.

In actual practice, this means you can use the TL-TP70-HDIR to send audio and video signals from your source device (often a switcher, cable box, or DVD player) to your destination device (often a display or projector) and control the source device remotely...all using a single twisted pair cable. In other words, you can install your source device in a remote closet or cabinet and control it with the same remote control used for your display. Now that’s a clean installation!

Note: The TL-TP50-HDIR requires shielded twisted pair cable with shielded connectors.

Techlogix Networx Fiber optic pen cleaner

Note: This product has been discontinued.

Cleaning pen for fiber optic components, including SFP modules, ports, and connectors. A must-have for anyone doing fiber optic installations.

Techlogix Networx TL-PCLEAN-SC Fiber Optic Pen Cleaner

Note: This product has been discontinued.

Cleaning pen for fiber optic components, including SFP modules, ports, and connectors. A must-have for anyone doing fiber optic installations.

WindFall Front Mount for iPad mini

Note: This product has been discontinued.

Easily mount an iPad mini outside your glass conference rooms and meeting rooms to create beautiful scheduling displays. WindFall Front Mount installs to the front of your mullions, features a large, hidden pocket to hide PoE power adapters, networking adapters, and external power banks (all sold separately)—all while maintaining a slim profile. WindFall Front Mount features our incredibly rigid, commercial-grade construction, simple installation, tamper-resistant assembly, fingerprint-resistant, and scratch-resistant powder coat finish. Pair with a PoE Splitter (sold separately) to keep your iPad mini powered throughout the day.

WindFall Side Mount for iPad mini

Note: This product has been discontinued.

Pretty, simple tablet mounting. Easily mount an iPad mini outside your conference rooms and meeting rooms to create beautiful scheduling displays. WindFall Side Mount installs to the side of your mullions, features a large, hidden pocket to hide PoE power adapters, networking adapters, and external power banks (all sold separately)—all while maintaining a slim profile. WindFall Side Mount features our incredibly rigid, commercial-grade construction, simple installation, tamper-resistant assembly, fingerprint-resistant, scratch-resistant powder coat finish. Pair with a PoE Splitter (sold separately) to keep your iPad mini powered throughout the day.

Modern Profile

Maintain your meeting rooms' modern esthetic with the thinnest profile of any meeting room scheduler. And don't worry, Side Mount's heavy steel construction creates a rock-solid rigid structure ready to take the heaviest of screen taps with zero wiggles or wobbles.

Mount Left or Mount Right

Side Mount’s symmetric design allows you to mount regardless if your door is to the right or left of the mullion.

Room for Wired Networking

Need wired networking to your iPad meeting room schedulers? No problem. Side Mount’s pocket stores away a PoE Splitter, Apple Lightning to USB 3 Camera Adapter, Apple USB Ethernet Adapter, and all the mess that goes with it.

PoE Easy

Power-over-Ethernet to your mounted iPad devices need not be a hassle. With Side Mount for iPad mini, you can tuck your favorite PoE Splitter in the rear pocket and access it quickly, without the need to disassemble the mount.

Supports Power Banks

No way to run Ethernet cables to your mounted iPad mini? No biggie. Side Mount's rear pock fits some of the most popular brands of power banks. Quickly swap in full power banks as needed. Interior rear pocket pocket space: 7.4 x 3.75 x 0.95 inches.

Power + Data with Redpark Adapter

Pair your Side Mount with Redpark Gigabit + PoE Adapter for iPad (sold separately) to send both power & data to your tablet via ethernet. This MFI-certified (Apple approved) adapter will keep your tablet powered throughout the day, and provide a reliable ethernet connection that supports speeds up to 225 Mbps.

Note: This product has been discontinued.

Signature Series 6.5" 2-Way, FIT In-Ceiling, Infinite Baffle Loudspeaker

Product Information

The easy to install FIT650 is a full-range ceiling loudspeaker with Focused Image Technology™. It incorporates the MetaPlex™ woofer with a butyl rubber surround and the diffraction-less silk dome pivoting Ferrofluid cooled tweeter. This Patent Pending pivoting tweeter allows for deeper penetration into the room and a concentrated sound to the sweet spot. This revolutionary combination provides superior and more natural sound for both foreground and background applications.

The FIT series speakers additionally incorporate the unique Patent Pending Three Dimensional Positioning (3-DP) woofer. This design allows the user to separately adjust the angle, tilt and rotation of the woofer so you can direct the sound where you want it, not where you install it.

The Positive Position Lock system (PPL) uses two screws on either side of the woofer that pull the back plane tight and locks the position in place.

The Infinite Baffle design makes it the ideal choice for typical applications in open beam attic or enclosed ceilings.

For efficiency and consistency the FIT650 is timbre matched to the CS650 and WS650 series of speakers.

The speaker color is white, and is a close match to Frazee White Shadow 181. It can be painted to match any decor. The speaker enclosure is a durable UV resistant material that allows for both indoor and outdoor installations. The speaker is weather-resistant.

The perforated powder-coated aluminum alloy grille is long lasting, corrosion resistant and rust-free.

Four built-in expanding transverse dogleg clamps permit installation with or with out pre-wire construction brackets in drywall or material with thickness of 5/16" to 1 5/16".

Electrical connection, up to 12 gauge wire, is made by gold plated constant tension spring-loaded terminals.

With our limited 5 year warranty you are assured years of superior trouble free operation.

Note: This product has been discontinued.

Contractor Series 8" 2-Way, In-Ceiling, Infinite Baffle, Loudspeaker w/FastLoc™ Grille

Product Information

The BCS80FL is a competitively priced full-range Ceiling Loudspeaker that introduces the customer to the possibilities of whole house audio for every room.

The FastLoc™ grille patent no. 8,422,722, is a feature found only at Current Audio. Our design has allowed for the smallest exposed plastic bezel in the industry, trulymaking it disappear into the mounting surface. The FastLoc grille's unique patent pending mechanism allows for a quick installation and removal of the grille while securely fastening it in place to all types of mounting surfaces. Due to the unique design the grille will conform to uneven surfaces including popcorn, heavy textured and uneven ceilings. While our competitors have chosen to utilize magnets in their designs thus requiring the use of a steel grille that will rust our design allows us to use corrosion and rust resistant aluminum.

It incorporates a Talc Filled Polypropylene woofer with a butyl rubber surround and fixed polycarbonate dome Ferrofluid cooled tweeter.

Even in this competitive package our speaker provides exceptional natural sound for both foreground and background applications.

The Infinite Baffle design makes it the ideal choice for typical application in open beam attic or enclosed ceilings.

The grille color is white, and is a close match to Frazee White Shadow 181. It can be painted to match any decor. The grill is a powder coated aluminum design.

Four built-in expanding transverse dog leg clamps permit installation with or without pre-wire construction brackets in drywall or material with thickness of 5/16" to 1 1/2".

Electrical connection, up to 14 gauge wire, is made by standard constant tension red/black spring-loaded terminals.

With our limited 5 year warranty you are assured years of superior trouble free operation.

Rugged, with plenty of pockets makes this Klein Tools Tool Tote great to have on any jobsite. It’s constructed of durable polyester, which is water-resistant to keep mildew and mold from building up. It also has a molded base with drain holes to prevent water retention. It also has seven pockets that provide plenty of storage options.

Klein Tools CL700 Digital Clamp Meter AC Auto-Ranging LoZ

Klein Tools CL700 is an automatically ranging true root mean squared (TRMS) digital clamp-meter that measures AC current via the clamp, and measures AC/DC voltage, resistance, continuity, frequency, capacitance, and tests diodes via test-leads, and temperature via a thermocouple probe. It also features a Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages. Klein Tools’ Test and Measurement product line was exclusively designed from the ground up by electricians for electricians. Years of field research, combined with extensive input from electricians across America, inspired the development of meters loaded with innovative, time-saving features.

Heavy-duty, tempered steel blades

These Klein Tools 9 in. Insulated Side-Cutting Pliers have jaws knurled with a cross-hatch pattern for excellent gripping. They are made of steel alloy for strength and performance.

These Klein Tools 9 in. Insulated Side-Cutting Crimping Pliers offer protection against electric shock up to 1,000 volts. The pliers offer maximum strength with their forged-steel construction and a crimping die helps provide increased leverage.

Unique multi-tool addresses the special needs of electricians and maintenance professionals while providing many other features handy on any job

Cuts 350 MCM Copper, 350 MCM Aluminum cable

Removable pouches allow you to carry only the tools you need

Designed to allow electricians to efficiently handle a majority of their daily projects, the six-piece trim-out set is a portable solution for users who do not need a full range of tools for a particular job. It also is useful for apprentice electricians who are building their tool sets with core tools.

18 Inch Canvas Tool Bag with Leather Bottom

Note: This product has been discontinued.

This canvas tool bag features 10 interior pockets and 1 external for organization. The leather bottom and sides provide extra protection from the elements. #8 natural canvas is heavy-duty for added durability. At 18-Inch (457 mm) wide and 14-Inch (356 mm) high, this is the perfect bag for on the job.

Made of Cordura fabric, a high-performance material resistant to abrasions, tears and scuffs

Note: This product has been discontinued.

Keep your hands free and your tools organized and easily accessible with these new Tradesman Pro bags. The high-visibility interiors make it easy to find small parts and tools; the outer reflective strips create greater visibility in low light conditions.

The Klein Tools 11-Piece Metric Combination Wrench Set contains a variety of standard and special-purpose wrenches. They are made from drop-forged steel alloy and have been hardened and tempered for strength.

The Klein Tools 8-Pocket Extra-Capacity Tool Pouch features stitched leather with rivet reinforcement. In addition to the tool pockets, the pouch has a snap-hook and a tape thong for added convenience.

Great bag if you want to bring a select group of tools to a job and leave the rest in the box. Made of extra-heavy leather, this rugged tool bag has a double-ply bottom with steel studs for extra durability. Lightweight and portable.

Be protected from up to 1,000 volts of electric current when working on live wires with the Klein Tools 8-7/8 in. Insulated Universal Side-Cut Crimp Pliers. These pliers offer flame-retardant handles, a toothed pipe grip and a high-leverage crimping die.

Klein Tools Electrician's Insulated Combination Pliers are 1000V rated and VDE certified for safety on the job. The multi-color, sleek design with small thumbguards make for easy handling and storage. The three-part insulation with white underlayer provides a warning sign that insulation may be compromised. The durable, molded insulation meets or exceeds IEC 60900 and ASTM F1505 standards for insulated tools.

When cutting cable where there is a risk of electrical shock, use the Klein Tools Insulated High-Leverage Cable Cutter. This cable cutter offers protection up to 1,000 volts and features a 1-handed shearing design for easy operation.