Switches & Splitters

16-Port Gigabit Ethernet PoE+ Web-Managed Switch with 2 SFP Ports

IEEE 802.3at/af Power over Ethernet (PoE+/PoE) Compliant, 220 W, Endspan, 19" Rackmount

Save installation time and money with PoE

The Intellinet Network Solutions 16-Port Gigabit Ethernet PoE+ Web-Managed Switch with 2 SFP Ports (561341) is designed to pass both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with sixteen Gigabit Ethernet ports, all of which support 802.3at/af Power over Ethernet (PoE/PoE+), this switch can power Wireless LAN access points and bridges, VoIP (Voice over Internet Protocol) telephones, IP surveillance cameras and more while delivering network speeds of up to 1,000 Mbps.

Power over Ethernet 802.3at

The Intellinet Network Solutions 16-Port Gigabit Ethernet PoE+ Web-Managed Switch with 2 SFP Ports supports the IEEE 802.3at protocol and is designed to inject up to 30 watts of power per port*. IEEE802.3af or IEEE802.3at compliant devices attached to the switch require no additional power, thus eliminating the time and expense of electrical rewiring and minimizing the unsightly clutter caused by power supplies and adapters in awkward places such as ceilings and walls. Any mix of PoE and non-PoE devices is supported, and thanks to its short circuit, overload and high-voltage protection function, your equipment is well-protected. For devices that are not 802.3at/af compliant (legacy wireless access points or network cameras), we suggest use of an Intellinet Network Solutions PoE/PoE+ Splitter.

Sophisticated PoE Management Features including Self-Healing Network

The Intellinet Network Solutions 16-Port Gigabit Ethernet PoE+ Web-Managed Switch provides detailed, real-time information about the connected PoE devices, how much power they draw and how much power is still available. The delay-time-per-port feature reduces the power hike that usually happens at system start, and the PoE priority feature (low, medium, high) allows you to define mission-critical ports that will continue to receive power even if the switch's power budget limit has been exceeded. Furthermore, you can define the maximum available power per port, turn PoE on and off per port and monitor the current power draw of all connected PoE devices. Finally, the Intellinet Network Solutions switch can send SNMP-traps messages to alert the administrator that the total power draw on the switch exceeds the user-defined threshold value. The Powered Device Monitor (Intellinet Network Solutions PDM) feature keeps an eye on connected PoE devices and restarts them in case they stop responding. What's more, you can also program the Intellinet Network Solutions PoE switch to restart connected PoE devices based upon a schedule, ensuring that the PoE devices remain stable and operational.

Eliminate Bottlenecks with Gigabit Speeds

Equipped with 16 auto-sensing 10/100/1000 Mbps RJ45 Gigabit Ethernet ports, the 16-Port PoE Web-Managed Gigabit Switch (561341) offers plenty of performance for your computers, servers and other networking devices. In addition, two small form-factor pluggable GBIC module slots (SFP) provide fiber connectivity for greater distances.

Full Layer 2+ Management Features

The switch includes full Layer 2+ Management features. The software set includes up to 4k 802.1Q VLAN and advanced protocol VLAN, and private VLAN. There are eight physical Quality of Service queues, Multicast filtering, Rapid Spanning Tree Protocol to avoid network loop, Multiple Spanning Tree Protocol (MSTP) to integrate VLAN and spanning tree, LACP, port mirroring and advanced network security features.

Advanced Security

The Intellinet Network Solutions 16-Port PoE+ Web-Managed Gigabit Switch (561341) supports advanced security features. For secure switch management, HTTPS and SSH are provided. In addition, the login password and configuration packets are secured. Port binding allows a specific MAC address to be bound to a port, and then only that MAC has the privilege to access the network. Thanks to 802.1X port based access control, every user needs to be authorized first when they want to access the network. The Layer 2+ access control list (ACL) allows the user to define the access privilege based on IP or port number.

* Total PoE budget for this switch is 220 watts. Per-port average power distribution is 13.75 watts; maximum per-port power usage cannot exceed 30 watts.

24-Port Gigabit Ethernet Switch with 2 SFP Ports

24 x 10/100/1000 Mbps RJ45 Ports + 2 x SFP, IEEE 802.3az (Energy Efficient Ethernet), 19" Rackmount, Metal

Boost your network speed

The Intellinet Network Solutions Gigabit Ethernet Rackmount Switch, model 561044, offers an array of features while providing superior network throughput.

Extreme Flexibility

Twenty-four 10/100/1000 Mbps auto-sensing ports automatically detect optimal network speeds.

Eliminate Bottlenecks with 26 Gigabit Ports

Equipped with 24 auto-sensing 10/100/1000 Mbps RJ45 Gigabit Ethernet ports, this switch offers plenty of performance for your computers, servers and other networking devices. In addition, two small form-factor pluggable GBIC module slots (SFP) provide fiber connectivity for greater distances. These are not shared combo-ports, but true Gigabit ports, pushing the total available bandwidth up to 52 Gbps.

16-Port Gigabit Ethernet PoE+ Switch

16 x PoE ports, IEEE 802.3at/af Power-over-Ethernet (PoE+/PoE), Endspan, Rackmount

Save installation time and money with PoE.

The Intellinet Network Solutions Gigabit Ethernet Power over Ethernet Network Switch (560993) is designed to pass both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with 16 Gigabit Ethernet ports, this switch can power wireless LAN access points and bridges, VoIP phones, IP video cameras and more while delivering network speeds of up to 1,000 Mbps.

PoE Standard IEEE 802.3at

The Intellinet Network Solutions 16 Port PoE Switch supports the IEEE 802.3at protocol and is designed to inject up to 30 watts of power per port*. IEEE802.3af- or IEEE802.3at-compliant devices attached to the switch require no additional power, thus eliminating the time and expense of electrical rewiring and minimizing the unsightly clutter caused by power supplies and adapters in awkward places such as ceilings and walls. Any mix of PoE powered devices and non-PoE devices is supported, and thanks to its short-circuit, overload and high-voltage protection function, your equipment is well-protected. For devices that are not 802.3at/af compliant (legacy wireless access points or network cameras), we suggest the use of an Intellinet Network Solutions PoE/PoE+ Splitter.

Extreme Throughput

With a backplane speed of 32 Gbps, there is plenty of performance available for your computers, servers and other networking devices.

* Total PoE budget for this switch is 220 watts.

8-Port Gigabit Ethernet PoE+ Switch

IEEE 802.3at/af Power over Ethernet (PoE+/PoE) Compliant, 140 W, Endspan, Desktop, 19" Rackmount

When you need power for compatible devices, Power over Ethernet provides it.

The Intellinet Network Solutions 8-Port Gigabit Ethernet PoE+ Switch is designed to pass both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with eight Gigabit Ethernet ports, this switch can power wireless LAN access points and bridges, VoIP phones, IP video cameras and more while delivering network speeds of up to 1000 Mbps.

Save installation time and money with PoE 802.3at.

The Intellinet Network Solutions 8-Port Gigabit Ethernet PoE+ Switch supports the IEEE 802.3at protocol and is designed to inject up to 30 watts of power per port*. IEEE802.3af- or IEEE802.3at-compliant devices attached to the switch require no additional power, thus eliminating the time and expense of electrical rewiring and minimizing the unsightly clutter caused by power supplies and adapters in awkward places such as ceilings and walls. Any mix of PoE and non-PoE devices is supported, and thanks to its short circuit, overload and high-voltage protection function, your equipment is well-protected. For devices that are not 802.3at/af compliant (e.g., legacy wireless access points or network cameras), we suggest the use of an Intellinet Network Solutions PoE/PoE+ Splitter.

* Total PoE budget for this switch is 140 watts. Per-port average power distribution is 17.5 watts; maximum per-port power usage cannot exceed 30 watts.

24-Port Gigabit Ethernet PoE+ Web-Managed Switch with 2 SFP Ports

24 x PoE ports, IEEE 802.3at/af Power over Ethernet (PoE+/PoE), 2 x SFP, Endspan, 19" Rackmount

Save installation time and money with Power over Ethernet.

The Intellinet Network Solutions 24-Port Gigabit Ethernet PoE+ Web-Managed Switch with 2 SFP Ports (560559) is designed to pass both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with 24 Gigabit Ethernet ports, all of which support 802.3at/af Power over Ethernet (PoE/PoE+), this switch can power Wireless LAN access points and bridges, VoIP (Voice over Internet Protocol) telephones, IP surveillance cameras and more while delivering network speeds of up to 1000 Mbps.

Self-Healing Network with increased reliability and stability - Intellinet Powered Device Monitor (PDM)

This Power over Ethernet switch is equipped with Powered Device Monitoring, a self-healing PoE function. This PoE watchdog performs a PD alive check to all connected PDs and automatically resets unresponsive devices, such as PoE security surveillance cameras, by cutting off and then restoring power. The PDM function is especially useful in applications where connected devices are critical to network operation, such as in industrial or surveillance settings. As an added benefit, the PD Alive function helps eliminate unnecessary technical support calls and costly field trips by field-support engineers because the functional reboot can often bring the unresponsive device back online.

Power over Ethernet 802.3at

The Intellinet Network Solutions 24-Port Gigabit Ethernet PoE+ Web-Managed Switch with 2 SFP Ports supports the IEEE 802.3at protocol and is designed to inject up to 30 watts of power per port*. IEEE802.3af or IEEE802.3at compliant devices attached to the switch require no additional power, thus eliminating the time and expense of electrical rewiring and minimizing the unsightly clutter caused by power supplies and adapters in awkward places such as ceilings and walls. Any mix of PoE and non-PoE devices is supported, and thanks to its short circuit, overload and high-voltage protection function, your equipment is well-protected. For devices that are not 802.3at/af compliant (legacy wireless access points or network cameras), we suggest the use of an Intellinet Network Solutions PoE/PoE+ Splitter.

Eliminate Bottlenecks with Gigabit Speeds

Equipped with 24 auto-sensing 10/100/1000 Mbps RJ45 Gigabit Ethernet ports, the 24-Port Gigabit Ethernet PoE+ Web-Managed Switch with 2 SFP Ports offers plenty of performance for your computers, servers and other networking devices. In addition, two small form-factor pluggable GBIC module slots (SFP) provide fiber connectivity for greater distances.

Web-Management

This PoE switch is equipped with an impressive array of advanced management functions that allow you to be in full control over your network. The 24-Port Gigabit Ethernet PoE+ Web-Managed Switch with 2 SFP Ports supports VLAN, port aggregation, QoS, port mirroring, SNMP V1 and the popular SNMP V2c, just to name a few.

* Total PoE budget for this switch is 240 watts. Per-port average power distribution is 10 watts; maximum per-port power usage cannot exceed 30 watts.

8-Port Gigabit Ethernet Switch

Desktop size, Metal Housing, IEEE 802.3az (Energy Efficient Ethernet)

Easy to install, with auto-learning capabilities

The Intellinet Network Solutions Gigabit Ethernet Switch is perfect for the home or small office, delivering top speeds to the desktop to satisfy your demanding network needs.

High-Speed Performance

This desktop switch includes eight Gigabit Ethernet ports, providing you with high performance on your network to handle quick transfer speeds that support disk mirroring, data backup, graphics image file transfers and other bandwidth-intensive applications.

Auto Features

This network LAN switch includes many automatic features that make it easy to use. No configuration is required, so installation is Plug and Play and hassle free. Auto-MDI/MDI-X crossover on all ports eliminates the need for any crossover cables. Each of the eight ports on this network LAN switch automatically senses the link speed of the connected network device and adjusts to 10, 100 or 1000 Mbps for compatibility and maximum performance.

Reliable Operation

The Intellinet Network Solutions Gigabit Ethernet Switch supports flow control when operating in half duplex mode and IEEE 802.3ab in full duplex mode to ensure that data transfer and network connectivity run smoothly and uninterrupted. In conjunction with the broadcast storm control and the store and forward switching method, full and half duplex modes further ensure that your connections remain active even under extremely busy conditions.

Intellinet Gigabit Ethernet Switch 5-Port

Desktop Size, Metal Housing, IEEE 802.3az (Energy Efficient Ethernet)

Easy to install, with auto-learning capabilities

The Intellinet Network Solutions Gigabit Ethernet Switch is perfect for the home or small office, delivering top speeds to the desktop to satisfy your demanding network needs.

High-Speed Performance

This desktop switch includes five Gigabit Ethernet ports, providing you with high performance on your network to handle quick transfer speeds that support disk mirroring, data backup, graphics image file transfers and other bandwidth-intensive applications.

Auto Features

This network LAN switch includes many automatic features that make it easy to use. No configuration is required, so installation is Plug and Play and hassle free. Auto-MDI/MDI-X crossover on all ports eliminates the need for any crossover cables. Each of the five ports on this network LAN switch automatically senses the link speed of the connected network device and adjusts to 10, 100 or 1000 Mbps for compatibility and maximum performance.

Reliable Operation

The Intellinet Network Solutions Gigabit Ethernet Switch supports flow control when operating in half duplex mode and IEEE 802.3ab in full duplex mode to ensure that data transfer and network connectivity run smoothly and uninterrupted. In conjunction with the broadcast storm control and the store and forward switching method, flow control further ensures that your connections remain active even under extremely busy conditions.

Manhattan 8-Port Gigabit Ethernet Switch

Desktop Size, Plastic, IEEE 802.3az (Energy Efficient Ethernet)

Easily add Ethernet-ready devices to your home or office network at Gigabit speeds

The Manhattan 8-Port Gigabit Ethernet Switch is perfect for home office or entertainment system use, as well as many small office applications. Small, powerful and reliable, this Gigabit Ethernet Switch is easy to install and connects up to eight Ethernet-ready devices — computers, gaming systems, network printers, media streamers, network attached storage, Smart TVs ... you name it — at speeds of up to 1000 Mbps (1 Gigabit) over standard Cat5e or Cat6 Ethernet cables.

The auto features of this switch make installation plug-and-play and hassle free. Plus, it has Green Ethernet technology, allowing it to monitor power usage and turn off unused ports to save electricity.

Manhattan 5-Port Gigabit Ethernet Switch

Desktop Size, Plastic, IEEE 802.3az (Energy Efficient Ethernet)

Easily add Ethernet-ready devices to your home or office network at Gigabit speeds

The Manhattan 5-Port Gigabit Ethernet Switch is perfect for home office or entertainment system use, as well as many small office applications. Small, powerful and reliable, this Gigabit Ethernet Switch is easy to install and connects up to five Ethernet-ready devices — computers, gaming systems, network printers, media streamers, network attached storage, Smart TVs ... you name it — at speeds of up to 1000 Mbps (1 Gigabit) over standard Cat5e or Cat6 Ethernet cables. The auto features of this switch make installation plug and play and hassle free. Plus, it has Green Ethernet technology, allowing it to monitor power usage and turn off unused ports to save electricity.

Intellinet 16-Port 2.5G Ethernet PoE+ Switch

IEEE 802.3at/af (PoE+/PoE) Compliant, 250 W PoE Power Budget, Two 1G SFP Slots, Powered Device Monitor (PDM), 19" Rackmount

Power over Ethernet Switch with 18 ports - 16 RJ45 and Two SFP, VLAN and PoE Extend Mode, Unmanaged with Self-Healing Network Feature

The Intellinet Network Solutions 16-Port Gigabit Ethernet PoE+ Switch with 2 SFP Ports passes both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with 16 Gigabit Ethernet ports, this switch can power wireless LAN access points and bridges, VoIP phones, IP video cameras and more while delivering network speeds up to 1,000 Mbps.

High-Power PoE+ 802.3at

This high-powered switch supports the IEEE 802.3at protocol and can inject up to 30 watts of power per port. IEEE802.3af- or IEEE802.3at-compliant devices attached to the switch need no additional power, which helps avoid the time and expense of electrical rewiring and minimizes the unsightly clutter of power supplies and adapters on ceilings and walls. Any mix of PoE and non-PoE devices is supported, and thanks to its short-circuit, overload and high-voltage protection function, your equipment is well-protected. For devices that are not 802.3at/af compliant (legacy wireless access points or network cameras), we suggest the use of an Intellinet Network Solutions PoE/PoE+ Splitter.

Self-Healing Network - Powered Device Monitor (PDM) for quick self-recovery of your network devices

Despite being an unmanaged switch, the included PDM feature (PD Alive, PoE Watchdog) keeps an eye on connected PoE devices such as surveillance cameras and restarts them in case they stop responding. This will reduce your service calls and management burdens significantly.

Eliminate Bottlenecks with 18 Gigabit Ports

Equipped with 16 auto-sensing 10/100/1000 Mbps RJ45 Gigabit Ethernet ports, this switch offers plenty of performance for your computers, servers and other networking devices. In addition, two small form-factor pluggable (SFP) GBIC module slots provide fiber connectivity for greater distances. These are not shared combo-ports but true Gigabit ports, pushing the total available bandwidth up to 36 Gbps.

PoE Extend Mode, ideal for IP cameras

Selectable with a convenient slide switch on the front panel, you can manually activate a "PoE Extend Mode" that reduces your network speed and extends your PoE range up to 250 m (820 ft.), which is ideal to deliver power and data to IP cameras over longer distances.

Intellinet 8-Port 2.5G Ethernet PoE+ Switch

Eight 10/100/1000/2500 Mbps PSE PoE+ Ports, 100 W PoE Power Budget, Unmanaged, Desktop Format, Wall-mount Option

Next-gen 2.5 Gbps Desktop 8-Port PoE Switch - Supports 10/100/1000/2500 Mbps, Power over Ethernet 802.3at

The 8-Port 2.5G Ethernet Unmanaged PoE+ Switch from Intellinet Network Solutions passes both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with eight multi-gigabit Ethernet PoE+ copper ports, this Switch can power wireless LAN bridges, VoIP phones and more while delivering network speeds up to 2500 Mbps.

Eliminate bottlenecks with 2.5G capability - great for high-bandwidth Wi-Fi 6 IEEE 802.11ax Access Points and more

Since at least the arrival of Wi-Fi 6 (but even with legacy Wi-Fi 5 [802.11ac]), "regular" Gigabit Ethernet ports have been at their bandwidth limits when connecting to wireless networks. This Switch's ability to support 2.5GBASE-T means it can deliver data to wireless APs faster and better accommodate other higher-bandwidth devices in your enterprise network.

High-power PoE+ with output up to 30 watts

This switch supports the IEEE 802.3at protocol and can inject up to 30 watts of power per port. IEEE802.3af- or IEEE802.3at-compliant devices attached to the switch require no additional power, which eliminates the time and expense of electrical rewiring and minimizes the unsightly clutter caused by power supplies and adapters in awkward places such as ceilings and walls. Any mix of PoE and non-PoE devices is supported, and thanks to its short circuit, overload and high-voltage protection function, your equipment is well-protected.

Intellinet Gigabit Ethernet PoE+ Switch 24-Port

IEEE 802.3at/af (PoE+/PoE) Compliant, PoE Power Budget of 370 W, Four 10G SFP+ Open Slots, 19" Rackmount

Robust 24-Port 370 W PoE+ Switch with 4 x 10G Uplinks - the new backbone for your video surveillance and more

The 24-Port Gigabit Ethernet PoE+ Switch with Four 10G SFP+ Uplinks from Intellinet Network Solutions can pass both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with a PoE power budget of 370 watts and 24 Gigabit Ethernet ports, all of which support 802.3at/af Power over Ethernet (PoE/PoE+), this switch can power IP surveillance cameras, wireless LAN access points and bridges, VoIP (Voice over Internet Protocol) telephones and more while providing a total switching capacity of 128 Gbps for your network.

Power over Ethernet 802.3at

Supporting the IEEE 802.3at protocol, this switch can inject up to 30 watts of power per port. IEEE802.3af or IEEE802.3at compliant devices attached to the switch require no additional power, thus eliminating the time and expense of electrical rewiring and minimizing the unsightly clutter caused by power supplies and adapters in awkward places such as ceilings and walls. Any mix of PoE and non-PoE devices is supported, and thanks to its short circuit, overload and high-voltage protection function, your equipment is well-protected. For devices that are not 802.3at/af compliant (legacy wireless access points or network cameras), we suggest the use of an Intellinet Network Solutions PoE/PoE+ Splitter.

Eliminate Bottlenecks with Gigabit Speeds

Equipped with 24 auto-sensing 10/100/1000 Mbps RJ45 Gigabit Ethernet ports, it offers plenty of performance for your computers, servers and other networking devices.

Future-Proof with 10 Gigabit Ethernet (IEEE 802.3ae)

Equipped with four 10G SFP+ open slots, this switch is the ideal solution for cost-sensitive organizations considering 10 Gigabit Ethernet. With 10G technology going mainstream and becoming ever more popular, the need for additional bandwidth has become more urgent than ever before - even in smaller networks. Whether you wish to connect servers, network attached storage units or NVRs at 10 Gbps, or perhaps you simply want to connect to another gigabit switch without resorting to LACP techniques, 10G provides the solution. And in case you are not quite ready for 10G just yet, it will happily take standard 1G SFP transceiver modules until the time is right for you to make the switch.

Intellinet 5-Port PoE-Powered Gigabit Switch

One PoE PD Port, Four PSE PoE ports, IEEE 802.3at/af (PoE+/PoE) Compliant, PoE Power Budget up to 60 W, Desktop Format, Wall-mount Option

Save installation time and money with PoE and get the most out each PoE connection with PoE passthrough!

The Intellinet Network Solutions PoE-Powered 5-Port Gigabit Switch with PoE Passthrough is designed to take power from a PoE switch and pass both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with five Gigabit Ethernet ports, this switch can power up to four wireless LAN access points and bridges, VoIP phones or IP video cameras, draw its own power from the PoE switch it is connected to, and deliver network speeds of up to 1,000 Mbps.

The Perfect Workgroup Switch

When you connect the PD port (port 1) to a PoE+ enabled IEEE 802.3af/at compliant PoE switch, the Intellinet Network Solutions PoE Passthrough Switch uses some of the electric current to power itself and passes the available surplus power to up to four PoE edge devices, such as VoIP phones, allowing you to realize the full potential of each of the PSE ports in your data center.

Power over Ethernet 802.3at

The Intellinet Network Solutions PoE Passthrough Switch supports the IEEE 802.3at protocol and is designed to inject up to 25 watts of power per port*. IEEE802.3af- or IEEE802.3at-compliant devices attached to the switch require no additional power, thus eliminating the time and expense of electrical rewiring and minimizing the unsightly clutter caused by power supplies and adapters in awkward places such as ceilings and walls. Any mix of PoE and non-PoE devices is supported, and thanks to its short-circuit, overload and high-voltage protection function, your equipment is well-protected. For devices that are not 802.3at/af compliant (legacy wireless access points or network cameras), we suggest the use of an Intellinet Network Solutions PoE/PoE+ Splitter.

Eliminate Bottlenecks with Gigabit Speeds

Equipped with five auto-sensing 10/100/1000 Mbps RJ45 Gigabit Ethernet ports, the Intellinet Network Solutions PoE Switch with PoE Passthrough with its 10 Gbps switch fabric provides plenty of of performance for your computers and other networking devices.

Green Ethernet Technology

More often than not, a network switch does not utilize all its ports at all times. When a computer, notebook, network printer or other network device is powered down, the switch continues to consume the same amount of power as if it were active. Thanks to the new energy-efficient IEEE 802.3az technology, the Intellinet Network Solutions PoE-Powered 5-Port Gigabit Switch with PoE Passthrough detects link status to all connected devices and reduces the power usage of ports not in use. In addition, the Intellinet Network Solutions switch can adjust the level of power output based on the length of the network cable connected to a particular port. With the Intellinet Network Solutions PoE Switch with PoE Passthrough you will enjoy maximum network performance, but when things slow down it automatically scales back power usage to conserve energy and save money.

* Total PoE budget for this switch is 68 watts when using the included AC power adapter. This brings the maximum per-port power distribution to 17 watts. When using the PD port to provide power, the total power budget is 26 watts (6.5 watts per port). The maximum per-port power usage cannot exceed 30 watts.

Evolution 4K HDR 1×4 HDMI Splitter over Cat6 Cable

The EV4K7014 is an HDMI splitter that allows one HDMI input to be split and sent to up to five displays simultaneously. With four outputs over UTP, and one output over HDMI, the EV4K7014 allows for a local display connected, or to daisy chain additional units to gain more outputs. The EV4K7014 includes four receivers (EV4K7014-RX) as a kit, which are PoE, and do not require any power supplies at the display end. Extends 4K@60Hz 4:4:4 with HDR10 and IR control up to 230ft/70m over a single Cat6 cable. IR accessories are included to allow IR pass-through for controlling the source at each UTP display location. For splitting and distributing one single source to multiple displays, while extending over Cat6, the EV4K7014 is a great solution for any application with the ability to expand.

*NOTE - All specifications and ratings for the EV4K7014 have been tested and confirmed using Cat6 cabling. Cat6 or better is strongly recommended for optimum performance, achieving rated distance, and maximizing the resolution capabilities of this product. Cat5e is not recommended and may not achieve distance and/or resolution expectations.

Evolution 4K Multi-Format Wireless Collaboration Switcher

The EVSW4K41 Evolution by Vanco 4K 4x1 wired and wireless collaboration switcher features a wireless Miracast/Airplay input, two HDMI inputs, and one USB-C input to a single HDMI output. Switch from multiple presenters to one display wired or wirelessly. With both Miracast and Airplay support, cast wirelessly from computers, tablets, and mobile devices to the display with ease. Supports HDMI 2.0b, 4K@60Hz, 4:4:4, HDR and HDCP 2.3. HDMI audio de-embedding built in to break out audio to an amplifier or audio distribution system. USB 3.0 device extension by providing two type-B USB ports for host connection, and two type-A USB ports for USB devices such as camera, microphone, keyboard etc., as well as soft codec capabilities to easily integrate with video conferencing software. Control with 3rd party systems via RS232 commands, in addition to manual and “auto” switching modes. For any presentation and collaboration needs that requires multiple presenters to switch to and from wired and wirelessly, with options for audio and USB, the EVSW4K41 is the perfect solution.

Evolution 10 Button Programmable Control Keypad

The Evolution by Vanco EVCTL10B is a 10-button IP-enabled keypad controller aimed at providing a simple and easy control solution for specific actions. Able to control wall presentation switchers, matrices, HDMI over IP solutions, and more over TCP/IP or RS232 protocols and can be powered over PoE, or with the Vanco 110018 Universal Power Supply (sold separately). Mount as a single gang wall plate into the wall or a box in a conference room table, and with a press of a button commands are automatically sent to other components. With up to 10 presets, the EVCTL10B is a perfect solution to automate different actions and themes for any space. Automate multiple actions to create a theme or setting for a conference room or home theater with a press of a button.

8K HDMI 2×2 Switching Splitter, EVSP8K22

The Evolution by Vanco EVSP8K22 HDMI Splitter with 8K HDR pass-through, splits one source at a time to two displays. With two HDMI inputs, two 8K sources can be switched and split at the same time. Supports video resolutions up to 8K@60Hz and 4K@120Hz over 4 channels of 10Gbps FRL for 40Gbps bandwidth. Features advanced EDID management and automatically adjusts for EQ based on the HDMI cables connected. Includes an IR remote for control with the option of front panel switching. Able to be used either as a splitter or a switcher, and is a great solution for gaming, video conferencing, education, and more!

*To maintain 8K resolution, both displays must have 8K resolution capability as the splitter does not downscale on individual outputs.

HDMI® 1×3 Splitter over Cat5e/Cat6 Cable

The Evolution EVSP1013 is a HDMI splitter that allows for 1 HDMI input to be split and sent to 4 different displays. The 3-UTP output ports can connect to the EVRX2006 POE receiver (sold Separately) over Cat5e/6 cable to transmit 1080p60 video with audio and control up to 50m. The single HDMI output can be used for a local display or cascaded into another splitter for an even larger distribution system. It supports 20k - 60K wideband bi-direction IR communication and dynamic or manual EDID management. The user can manually select the best compatible EDID or automatically blend EDID of 4 connected HDMI sinks. It also provides power over the Cat5e/6 so that the EVRX2006 do not require a power supply.

Compatible Receiver: EVRX2006 

Tech Support Tips:

• With recent changes to many new source and display components, we have updated the EVSP1013, EVSP1017, and EVRX2006 to improve compatibility. There are now “2nd Generation” versions of each of these products for improved compatibility

• Ensure that both the splitter(s) (EVSP1013 and EVSP1017) and receiver(s) (EVRX2006) match generation versions. For example, if using a “2nd Generation” splitter, a “2nd Generation” EVRX2006 receiver must be used. All “2nd Generation” Products are marked as such on the product and box. If no version or version number is listed, this would be a “1st Generation” unit

BZBGEAR 1X8 4K 18Gbps UHD HDMI HDBaset Splitter

The BG-UDA-E18 is a 1x8 4K HDBaseT splitter/extender kit. Supporting resolutions up to 4K@60Hz, users can extend HDMI sources over category 6 cabling at distances up to 390 feet, or up to 490 feet at 1080P@60Hz with the included HDBaseT extenders. With the ability to connect to one local and eight remote displays, this unit is ideally suited for use in restaurants, sports bars, retail spaces, and auditoriums.

Connectivity and Features

The BG-UDA-E18 supports a maximum resolution of 4K@60Hz 4:4:4. Compliant with HDMI 2.0b, HDCP 2.2, and HDCP 1.x, the transmitter offers EDID management to eliminate HDMI connection problems. The transmitter is equipped with an HDMI loop out connection for connection to a local display. One digital coax and one analog audio phoenix connector provide audio extraction from the source for connection to an external sound system.

Each receiver features Power over Ethernet, eliminating the need for a power supply at the display-end and enabling a clean installation. Each receiver has a 3.5mm stereo output for connection to a local sound source. The slim design of the receivers helps them fit behind the displays, and each one is equipped with RS-232 passthrough and bi-directional IR passthrough for integration with control systems.

BZBGEAR 1X4 4K 18Gbps UHD HDMI HDBaset Splitter

The BG-UDA-E14 is a 1x4 4K HDBaseT splitter/extender kit. Supporting resolutions up to 4K@60Hz, users can extend HDMI sources over category 6 cabling at distances up to 390 feet, or up to 490 feet at 1080P@60Hz with the included HDBaseT extenders. With the ability to connect to one local and four remote displays, this unit is ideally suited for use in restaurants, sports bars, retail spaces, and auditoriums.

Connectivity and Features

The BG-UDA-E14 supports a maximum resolution of 4K@60Hz 4:4:4. Compliant with HDMI 2.0b, HDCP 2.2, and HDCP 1.x, the transmitter offers EDID management to eliminate HDMI connection problems. The transmitter is equipped with an HDMI loop out connection for connection to a local display. One digital coax and one analog audio phoenix connector provide audio extraction from the source for connection to an external sound system.

Each receiver features Power over Ethernet, eliminating the need for a power supply at the display-end and enabling a clean installation. Each receiver has a 3.5mm stereo output for connection to a local sound source. The slim design of the receivers helps them fit behind the displays, and each one is equipped with RS-232 passthrough and bi-directional IR passthrough for integration with control systems.

BZBGEAR HDMI Video Wall Processor & Seamless Matrix Switcher

The BZBGEAR BZ-MVS4X4-4K is a matrix video wall controller that seamlessly switches signals from any of the four HDMI sources to any of the four connected HDMI displays. The four outputs can be configured to create a variety of video wall displays such as a 2x2, 1x4, 1x2, 2x1, and 4x1 video wall. Ideal for integrators, professional broadcasters, restaurant owners, and home theater enthusiasts seeking to create high-end video walls, or control multiple video sources and displays with one device.

Connectivity

The four HDMI ports support video bandwidths of 18Gbps and resolutions up to 4K@60Hz (4:4:4). The HDMI ports are HDMI 2.0 and HDCP 2.2 compliant. Each HDMI input features stereo audio embedding via the phoenix connectors on the back panel. The device is equipped with four stereo audio outputs and four TOSLINK S/PDIF ports for analog and digital audio de-embedding.

Control

The BZ-MVS4X4-4K can be configured and controlled using the PC Tool software via the LAN or RS-232 connections. Smart EDID management via the front panel buttons or web interface eliminate HDMI handshake issues for fast and reliable input switching. The HDMI CEC provides power and volume control of compatible monitors. Access basic control of the matrix switcher and network settings with the conveniently built-in WebGUI interface.

Complete with front panel buttons for quick and handy operation, the BZ-MVS4X4-4K’s flexible features make it an exceptional choice for designing outstanding video walls with flexible display control and connectivity.

BZBGEAR 8X8 4K 18Gpbs UHD HDMI/HDBaseT Matrix Switcher

This HDMI matrix extender can connect eight HDMI sources to sixteen output displays. This is accomplished using four HDMI outputs mirrored to four HDBaseT outputs that run simultaneously. The HDBaseT output allows video signals to be extended to longer ranges than a standard HDMI cable. When using 1080p resolution, the signal can travel up to 492ft / 150m and 394ft / 120m at 4K.

Connectivity

The maximum resolution of this matrix is 4K@60Hz (YUV 4:4:4) on all HDMI and HDBaseT ports. Data transmission is lossless and uncompressed, having a maximum bandwidth of 18Gbps, ensuring pure signal transfer for maximum image quality. The BG-UM88-150L-KIT utilizes HDMI 2.0b. The device is also HDCP 2.2 and HDCP 1.x compliant.

Operators also have the ability to downscale video from 4K to 1080p if necessary for each output port. Power over cable is supported on all HDBaseT ports, eliminating the need for an external power supply at the HDBaseT receiver.

HDMI audio pass-through allows operators to handle high quality sound up to 7.1 CH HD audio. Various audio codecs are also supported, including LPCM, Dolby TrueHD, and DTS-HD Master Audio. Audio can be de-embedded from the unit as well via analog and digital coax ports.

Control

The BG-UM88-150L-KIT can be controlled via buttons on the front panel, an IR remote, RS-232, LAN, and a web GUI. Advanced EDID management and CEC control are also available with this matrix. Bi-directional IR matrix routing is also supported, ensuring simple remote control of the currently selected video source as well as remote control of displays from the source location.

BZBGEAR 4X4 4K 18Gbps UHD HDMI/HDBaseT Matrix Switcher

This HDMI matrix extender enables operators to connect four HDMI sources to up to eight displays. This is accomplished using four HDMI outputs mirrored to four HDBaseT outputs that run simultaneously. The HDBaseT output allows video signals to be extended to longer ranges than a standard HDMI cable. When using 1080p resolution, the signal can travel up to 492ft / 150m and 394ft / 120m at 4K.

Connectivity and Quality

The maximum resolution of this matrix is 4K@60Hz (YUV 4:4:4) on all HDMI and HDBaseT ports. Data transmission is lossless and uncompressed, having a maximum bandwidth of 18Gbps, ensuring pure signal transfer for maximum image quality. The BG-UM44-150L-KIT utilizes HDMI 2.0b. The device is also HDCP 2.2 and HDCP 1.x compliant.

Operators also have the ability to downscale video from 4K to 1080p if necessary for each output port. Power over cable is supported on all HDBaseT ports, eliminating the need for an external power supply at the HDBaseT receiver.

HDMI audio pass-through allows operators to handle high quality sound up to 7.1 CH HD audio. Various audio codecs are also supported, including LPCM, Dolby TrueHD, and DTS-HD Master Audio. Audio can be de-embedded from the unit as well via analog and digital coax ports.

Control

The BG-UM44-150L-KIT can be controlled via buttons on the front panel, an IR remote, RS-232, LAN, and a web GUI. Advanced EDID management and CEC control are also available with this matrix. Bi-directional IR matrix routing is also supported, ensuring simple remote control of the currently selected video source as well as remote control of displays from the source location.

 2.0 HDBaseT 4x4 Matrix w/HDMI mirroring outputs & Downscaling, 4K/60Hz

EVMX44PRO

The Evolution by Vanco EVMX44PRO 4K 4x4 HDBaseT™ Audio and Video Matrix Switcher with ARC, IR, IP and RS-232 allows 4 HDMI sources to be distributed to up to 4 displays simultaneously, with mirrored HDMI outputs for a total of 8 outputs! The EVMX44PRO is capable of transmitting 4K@60Hz, 4:4:4 Chroma Subsampling, and HDR up to 131ft/40m over a single Cat6 cable, and 4K@60Hz, 4:4:4 Chroma Subsampling with HDR10 and Dolby Vision on the HDMI inputs and HDMI outputs. For control, the EVMX44PRO features multiple methods including simple control using the front panel control, IR control, RS-232, and an easy to use UI accessible via IP. Control switching sources to displays from a computer or a wireless device such as a tablet or mobile phone. Need an audio matrix as well? The EVMX44PRO also features the ability to send any HDMI audio input to up to 4 zones. Compatible with both the EVRXHD2 and EVRXDSC HDBaseT receivers to create a modular matrix unit, add downscaling, ARC, audio extraction, and RS-232 to any HDBaseT output. For switching multiple sources to multiple displays using HDBaseT technology, with many features for control, audio switching, ARC, 4K HDR resolution, and scaling, the EVMX44PRO is a great choice for any application.

EVMX88PRO

The Evolution by Vanco EVMX88PRO 4K 8x8 HDBaseT™ Audio and Video Matrix Switcher with ARC, IR, IP and RS-232 allows 8 HDMI sources to be distributed to up to 8 displays simultaneously, with mirrored HDMI outputs for a total of 16 outputs! The EVMX88PRO is capable of transmitting 4K@60Hz, 4:4:4 Chroma Subsampling, and HDR up to 131ft/40m over a single Cat6 cable, and 4K@60Hz, 4:4:4 Chroma Subsampling with HDR10 and Dolby Vision on the HDMI inputs and HDMI outputs. For control, the EVMX88PRO features multiple methods including simple control using the front panel control, IR control, RS232, and an easy to use UI accessible via IP. Control switching sources to displays from a computer or a wireless device such as a tablet or mobile phone. Need an audio matrix as well? The EVMX88PRO also features the ability to send any HDMI audio input to up to 8 zones. Compatible with both the EVRXHD2 and EVRXDSC HDBaseT receivers to create a modular matrix unit, add downscaling, ARC, audio extraction, and RS-232 to any HDBaseT output. For switching multiple sources to multiple displays using HDBaseT technology, with many features for control, audio switching, ARC, 4K HDR resolution, and scaling, the EVMX88PRO is a great choice for any application.

The BG-UHD-QVP-4X2 is a 4K Quad-View/Multi-Viewer Video Processor suitable for digital signage, presentation spaces, conference rooms, and live or recorded broadcasting. The integrated USB 3.0 capture and auto-scaling outputs at resolutions up to 1080p with 2 channel for use with online conferencing apps like Skype, Zoom, vMix, or OBS Studio. The unit is capable of routing ultra-high definition video sources from four UHD HDMI input sources to the two HDMI display outputs and one HDMI loop output simultaneously while delivering resolutions up to 4K2K@60Hz 4:4:4 using HDMI 2.0a technology. It can also extract audio via the 3.5mm output.

Control options include the front panel, a built-in web interface, and third-party control via RS-232 and IR. Simply select a customizable layout, choose your inputs and route them to the desired display windows. Packed with options including PIP, PBP, fade-in/out, blend, zoom, and more the BG-UHD-QVP-4X2 gives you studio-quality results with every presentation.

The 4X4 HDMI and HDBaseT Matrix Switch can connect four HDMI sources to eight displays. It features four HDMI outputs with each HDMI output mirrored to a simultaneous HDBaseT output. The HDBaseT output can extend video transmission distance up to 328ft / 100 meters via a single cat5e/6/7 cable at resolutions up to 4K@60Hz 4:4:4.
This product performs full IR and audio matrix switching. With the ARC function, it can return the audio signal from an HDMI or HDBaseT display device to the coaxial audio output. It can also extract the audio signal from HDMI source devices to the analog audio output. Each extender features bi-directional IR, RS232, and 2 LAN ports for IP Control. The base unit has an intuitive set of front panel controls with OLED screen and also supports control using IR, RS-232, IP, and Web GUI.
The BG-UM44-100M-KIT is loaded with all the features you need to form the core of a future-proof A/V Distribution system. Contact a friendly BZB sales engineer today to order yours!

The BG-UHD-42M 4x2 HDMI Matrix Switch is the perfect solution for distributing high definition audio and video sources at resolutions up to 4k@60Hz 4:4:4 8 bits with HDR. HDCP 2.2 compliant, this unit offers 4 HDMI 2.0a inputs and 2 HDMI 2.0a outputs with full multi-channel audio support. This switch is capable of downscaling from 4K to 1080P, ensuring that legacy displays are supported. It is ideal for use in environments such as conference rooms, restaurants, and home A/V systems. Integration-friendly features include IR control (remote included), external IR input, RS-232, IP, and Cloud Control ability. High-quality, cost-effective, and only available from BZBGEAR!

The BG-UHD-DA1X16 can distribute one HDMI input to sixteen HDMI outputs. The splitter supports 4K signals up to 4K@60Hz 4:4:4, HDR 10, Dolby Vision and features advanced EDID management option using 4-pin DIP switch on the front panel of the unit. It also supports downscaling so a 4K video input can automatically be down scaled to a 1080p output when connecting a display that only supports resolution up to 1080p. Stereo analog L/R audio output is provided for audio de-embedding from HDMI input and the splitter supports CEC and RS232 control.

The BG-DA-12GS1x2 is a compact 1x2 SDI Splitter. It features 2 separately buffered and re-clocked outputs to help eliminate jitter and extend transmission distances. It provides automatic input cable equalization up to 180m (3G), 100m (6G), or 70m (12G). LED indicators show signal lock and current video rate, and the inter-locked power supply ensures you always have a solid connection.

The BG-3GS12 is a compact and reliable 2-way SDI splitter. It is the perfect solution for dividing your SDI feed to run 2 displays. The combination of its small size and budget-friendly price make it an essential part of any video production tool kit. It supports SD to 200m, HD to 120m, and 3G to 80m, and resolutions up to 1080p@60fps.

Metra 1 X 4 HDMI® Splitter Extender

Supporting 1080P over category cable, the Metra Home Theater CS-1X4HDSPLEXT is a great way to share ah HDMI based source to 4 displays with category cable wiring.

Tenda 16-Port Gigabit Ethernet Switch

16*10/100/1000 Mbps auto-negotiation RJ45 ports, up to 2000 Mbps of full duplex transmission rate, line-speed forwarding by all ports, and large cache capacity ensure the timely transfer of large files and stable streaming video. Stay connected for 7*24.

Excellent lightning protection of ports

Professional integrated lightning protection circuit enables all the 16 ports to provide IV-class (6 kV in common mode) lightning protection, effectively decreasing the damage rate to the ports by lightning surge.

Professional lightning protection for power supply

The built-in power supply module is designed with enhanced lightning protection, which can withstand 6 kV lightning surge, 3 times higher than other ordinary switches, effectively protecting the switch from being damaged by adverse thunderstorm.

Innovative design

Full steel housing and plating through holes in three faces allow higher-efficient heat dissipation; fanless design ensures the noiselessness and dust free, harmoniously fitting into the offices; 13-inch size makes it mountable both on desktop and rack and plug and play function makes it easy for use.

Tenda 10/100/1000Mbps Gigabit Ethernet Switch

TEG1008D is an unmanaged gigabit switch with 5-8 10/100/1000Mbps auto-negotiation RJ45 ports. Wire-speed forwarding rate of each port is up to 1000Mbps. This switch supports 9k Jumbo Frame to increase the forwarding rate of large files in order to boost network performance . Lightning proof level is up to 4KV to ensure the stability and safety when you surf the internet. With bulit -in latest Broadcom chip , fanless and greenlumi design , this switch is the ideal choice for small & medium enterprises?schools , small offices to upgrade gigabit network.

Improve transmission efficiency

Support 9K jumbo Frame to speed up the transmission of large files and improve transmission efficiency.

Tenda 24-Port With 4 Shared SFP PoE Managed Switch

TEG3224P, launched by Tenda, is designed for building more secure and smart wireless network. Providing 24 10/100/1000 auto-negotiation RJ-45 ports and 4 reusable Base-X SFP ports, its RJ45 ports support both IEEE 802.3af (15.4W) and 802.3at (30 W) standard. In addition, it provides ARP attack defense, worm attack defense, IP+MAC+PORT+VLAN Bind, MAC filter and other safety settings through visual WEB interface operations. On the basis of high performance access, it provides a protective system with security of high level, perfect QoS strategy, rich VLAN function and greater ease of use of network administration and maintenance. It is best choice for your network.

Tenda 9 Port 10/100Mbps Desktop Switch With 8-Port PoE

Due to the complex monitoring environment, when making cabling and networking, it is usual to encounter the problem of inadequate network transmission distance, the distance of each camera terminal to the monitoring center is different, some are only a few meters, some are a hundred meters, while others are more than kilometers. Tenda TEF11 series PoE monitoring switches, exclusive patent network extension technology, use the common existing twisted pair, can support 250 meters data transmission, break the transmission limit of the existing twisted pair only for one hundred meters; Provide gigabit linked SFP port, can meet the demand of transmission to a few tens of kilometers.

6KV lighting protection PoE switch is the real monitoring private switch

In real monitoring project, cameras are often installed outdoor or in a higher position, which also increases the probability of lightning shock toward the cameras and PoE switches. Therefore, some of the equipment may be damaged and even the whole local area network (LAN) may be paralyzed.
Tenda TEF11 series switches have a professional lightning protection design – a 6kV port and power supply thunder prevent. These two protection designs can effectively inhibit the lightning current from the network cable and power supply, which is equivalent to adding a security Wall to the entire network monitoring system. And the test standards are far higher than the requirements of the state CCC. In thunderstorms, the monitoring network can also provide stable and reliable services to the monitoring network and ensure the normal transmission of the images.

Outstanding PoE Power Supply

Ports 1-8 support IEEE 802.3at and IEEE 802.3af PoE standard. It provides a maximum power supply of 30W to each port and 58W to the whole device.

Tenda 16-Port + 2 Gigabit Web Smart PoE Switch

Tenda Gigabit smart PoE switch TEF1218P-16-250W, with intelligent web network management functions, provides a more intuitive and user-friendly interface. It supports 250 meters long distance power supply, QVLAN, link aggregation, QoS, MAC address binding, etc., which greatly reduces construction difficulty and saves time, maximizing cost savings for engineerings.

GE & SFP uplink ports?Large Buffer of Nearly 3M

With one 10/100/1000 Mbps combo SFP slot, the switch can meet the current demand for uplink bandwidth of Gigabit WLAN and HD digital surveillance. Working with Tenda optical fiber module TEG311SM, the switch supports a maximum transmission distance up to 20km.

6KV Excellent Lightning Protection

The switch offers various safety and protection types, including 6 kV lightning protection, PSE short-circuit protection, PoE overload protection, surge current protection etc., and these greatly protect the switch from being damaged by thunderstorm. Besides, it supports wide voltage input, AC?100-240V~50/60Hz.

Up to 250 meters long distance transmission under the Extend Mode beyond hundred meters transfer limitation

Due to the complex monitoring environment, the distance from each terminal to the monitoring center is different, some even more than hundred meters. TEF1218-16-250W can support 250 meters long distance transmission, which can save the cost of your project with less devices used.

230 W PoE power supply

The switch features 16 RJ45 ports being compliant with IEEE 802.3af/at standard. The entire switch offers a maximum PoE power output of 230 W, and 30 W for a single port, to supply power to data transmission with 16 PoE-devices such as APs and IP cameras.

Tenda 10/100/1000Mbps Desktop Gigabit Switch

Gigabit speed: In full duplex mode, the transmission speed can be 2000Mbps, 10x speed of fast Ethernet , and data packets are forwarded at full wire speed.

Stay Online for 7*24 Hours and No Packet Loss

With store and forwarding mode, MAC address auto learning and auto aging ,this switch can transfer data without loss to ensure stable and blazing fast Wired network performance.

Stylish and Exquisite Design

Tenda SOHO Gigabit switches are nice and small and won't take up much desk or floor space. With desktop or wall-mounting design, you can put Tenda SOHO Gigabit switches anywhere you want and move flexibly. They come in a pretty dome-shaped pattern Plastic case. They will fit equally well in any desktop decor. Not only for Wired network use, but also for a homet.

Plug and Play, No Configuration Required

Wired network is available after plug Ethernet cable in no time effortlessly. Whether you are a tech-savvy enthusiast or a first-time user, Tenda SOHO Gigabit Switches are super easy and intuitive to setup without time-consuming operations. It is easy for us to setup the Internet in order to make you enjoy it with Tenda SOHO Gigabit Switches.

Tenda 24-Port Gigabit Ethernet Switch

24*10/100/1000 Mbps auto-negotiation RJ45 ports, up to 2000 Mbps of full duplex transmission rate, line-speed forwarding by all ports, and large cache capacity ensure the timely transfer of large files and stable streaming video. Stay connected for 7*24.

Excellent lightning protection of ports

Professional integrated lightning protection circuit enables all the 24 ports to provide IV-class (6 kV in common mode) lightning protection, effectively decreasing the damage rate to the ports by lightning surge.

Professional lightning protection for power supply

The built-in power supply module is designed with enhanced lightning protection, which can withstand 6 kV lightning surge, 3 times higher than other ordinary switches, effectively protecting the switch from being damaged by adverse thunderstorm.

Innovative design

Full steel housing and plating through holes in three faces allow higher-efficient heat dissipation; fanless design ensures the noiselessness and dust free, harmoniously fitting into the offices; 13-inch size makes it mountable both on desktop and rack and plug and play function makes it easy for use.

Quest Toslink 3X1 Switch W/Remote  & Ir Receiver

Quest offers a Toslink Audio Switcher to meet all Toslink applications.

4x2 HDMI Matrix Switch

The 4K HDMI Matrix Switch allows you share up to 4 distinct HDMI with audio, between 2 independent displays or projectors. This matrix switch allows each input and the corresponding audio to be switched individually, meaning that different two A/V sources can be shown on each output, or a single source can be output to two, offering maximum flexibility.

Composite 3 RCA Audio Video Switch | Tp-Link Switch

To select two or four A/V input sources (VCR, Stereo CD player or DVD) to TV output.

4 x 1 VGA Switch with 3.5mm Audio

Connect up to four computers to one monitor with this 4 x 1 VGA Switch with 3.5mm audio. It's easy to use, just plug and play. No external power is required.

Composite 3 RCA Audio Video Splitter