Switches & Splitters

Metra HDMI 2.0 Splitter

The Metra HDMI splitter with built-in scaling provides the ability to take any standard resolution and downscale it to match each of the connected displays (up to 2), simultaneously. For example, show 4K@60Hz content on a 4K display while also showing the same content scaled down on a 1080p display. Unlike traditional splitters, this built-in scaling allows legacy devices to work with newer higher resolution displays in the system, without automatically defaulting to the lowest resolution. Video quality on newer TVs is no longer sacrificed by having an older model in the mix.

Intellinet 54-Port L2+ Fully Managed PoE+ Switch

IEEE 802.3at/af (PoE+/PoE) Compliant, 450 W PoE Power Budget, Layer 2+/Layer 3 Lite, 6 x 10G SFP+ Open Slots, 19" Rackmount

54-port 450 W Gigabit Ethernet PoE+ Layer 2+ Managed Switch with Six 10G Uplinks - a powerhouse of Power over Ethernet, ports and Self-Healing Network features

This 54-Port L2+ Fully Managed PoE+ Switch with 48 Gigabit Ports and 6 SFP+ Uplinks is one of the flagship switches from Intellinet Network Solutions. With six 10G SFP/SFP+ module slots, a PoE power budget of 450 watts, 48 Gigabit Ethernet ports and several features like VLAN, QoS, SNMP and IGMP, it is a feature-rich installer’s choice for medium-sized businesses.

Save installation time and money with PoE

This switch is designed to pass both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with 48 Gigabit Ethernet ports, all of which support 802.3at/af Power over Ethernet (PoE/PoE+), it can power wireless LAN access points and bridges, VoIP (Voice over Internet Protocol) telephones, IP surveillance cameras and more while providing a total switching capacity of 216 Gbps in for your network.

Power over Ethernet 802.3at

Supporting the IEEE 802.3at protocol, this switch is designed to inject up to 30 watts of power per port*. IEEE802.3af or IEEE802.3at compliant devices attached to the switch require no additional power, thus eliminating the time and expense of electrical rewiring and minimizing the unsightly clutter caused by power supplies and adapters in awkward places such as ceilings and walls. Any mix of PoE and non-PoE devices is supported, and thanks to its short circuit, overload and high-voltage protection function, your equipment is well-protected. For devices that are not 802.3at/af compliant (legacy wireless access points or network cameras), we suggest the use of an Intellinet Network Solutions PoE/PoE+ Splitter.

10 Gigabit Ethernet (IEEE 802.3ae)

Equipped with four 10G SFP+ open slots, this switch is the ideal solution for cost-sensitive organizations considering 10 Gigabit Ethernet. With 10G technology going mainstream and becoming ever more popular, the need for additional bandwidth has become more urgent than ever before - even in smaller networks. Whether you wish to connect servers, network-attached-storage units or NVRs at 10 Gbps, or even simply connect to another gigabit switch without resorting to LACP techniques, 10G provides the solution. And in case you are not quite ready for 10G just yet, it will happily take standard 1G SFP transceiver modules until the time is right for you to make the switch.

Self-Healing Network with increased reliability and stability - Intellinet Powered Device Monitor (PDM)

This Power over Ethernet switch is equipped with Powered Device Monitoring, a self-healing PoE function. This PoE watchdog performs a PD alive check to all connected PDs and automatically resets unresponsive devices, such as PoE security surveillance cameras, by cutting off and then restoring power. The PDM function is especially useful in applications where connected devices are critical to network operation, such as in industrial or surveillance settings. As an added benefit, the PD Alive function helps eliminate unnecessary technical support calls and costly field trips by field-support engineers because the functional reboot can often bring the unresponsive device back online.

Eliminate Bottlenecks with Gigabit Speeds

Equipped with 48 auto-sensing 10/100/1000 Mbps RJ45 Gigabit Ethernet ports, it offers plenty of performance for your computers, servers and other networking devices.

* Total PoE budget for this switch is 450 watts. Per-port average power distribution is 9.4 watts; maximum per-port power usage cannot exceed 30 watts.

48-Port 1G L3 Switch with (4) 10G SFP+

The VIP-NET-4804PL3-1G is a next-generation L3 managed switch, expertly engineered for AV over IP applications. This advanced switch combines a comprehensive suite of L3 features to enhance performance while reducing total cost of ownership.

Equipped with (48) 1G ports and (4) 10GbE SFP ports, the VIP-NET-4804PL3-1G supports LACP and Is TAA Compliant, perfectly complementing our VIP product line.

24-Port 1G L3 Switch with (4) 10G SFP+

The VIP-NET-2404PL3-1G is a next-generation L3 managed switch purposed-designed and ready to go for AV over IP applications. The VIP-NET-2404PL3-1G o?ers a full suite of L3 features that deliver better performance and lower total cost of ownership. The VIP-NET-2404PL3-1G features (24) 1G ports and (4) 10GbE SFP ports with LACP, and TAA compliance. A perfect fit with any of our VIP products.

8×8 HDMI 2.0b Matrix Switcher

6×1 HDMI / USB-C 4K60 Seamless Presentation Switcher with Dante

The PS-610 is a 6×1 HDMI/USB-C 4K60 Seamless Presentation Switch, featuring versatile input options including USB-C, HDMI, Analog, and Dante™ 2ch in/out audio. Additionally, it offers balanced analog audio embedding and de-embedding capabilities. Any five sources can be output in a Multiview configuration four at a time (sixth local RX HDMI input is not available for multiview). Equipped with user-friendly control options including Front Panel, IR control, RS-232, TCP/IP, Web GUI control, iCON™ and other third party control drivers for popular control systems are also available. The PS-610 is rich with commands including, switching, multiview, audio adjustments, front panel lockout, and more. Please contact us today to learn about this exciting new collaboration and presentation product.

Couple the PS-610 with the iCON Control System for easy implementation of Video/Audio/IR/RS232 matrixing and control of your space.

4K60 HDMI 4×1 Switch with Motore Up/Down Scaling, Audio De-Embed, and Multiview

The HDTools™ MVS-41 provides Don’t Blink Seamless switching via the industry renowned Motore scaling engine. Fourteen different output resolutions can be easily set from either the front panel controls, or the RS232 API. The MVS-41 also features de-embedding of balanced stereo analog audio and SPDIF, seventeen (17) preloaded EDID tables with display EDID acquisition, and a number of Multiview layouts, including quad view for displaying all inputs simultaneously.

The MVS-41is HDCP 1.n and 2.2 compliant, and includes an infrared remote control with IR extender

The MVS-41is perfect for:

• Conference Rooms
• Hospitality and Convention Halls
• Corporate
• Entertainment
• Retail
• Home Theater
• and much more…

Couple the MVS-41with the iCON-10W 10 button controller for easy implementation of switching, layouts, and control of other devices in your application.

The MVS-41 can easily be controlled by other third party control devices from Crestron and QSC and more.

4K60 HDMI 2×1 Switch with Motore Up/Down Scaling, Audio De-Embed, and Multiview

The HDTools™ MVS-21 provides Don’t Blink Seamless switching via the industry renowned Motore scaling engine. Fourteen different output resolutions can be easily set from either the front panel controls, or the RS232 API. The MVS-21 also features de-embedding of balanced stereo analog audio and SPDIF, seventeen (17) preloaded EDID tables with display EDID acquisition, and a number of Multiview layouts for displaying both inputs simultaneously.

The MVS-21is HDCP 1.n and 2.2 compliant, and includes an infrared remote control with IR extender

The MVS-21is perfect for:

• Conference Rooms
• Hospitality and Convention Halls
• Corporate
• Entertainment
• Retail
• Home Theater
• and much more…

Couple the MVS-21with the iCON-10W 10 button controller for easy implementation of switching, layouts, and control of other devices in your application.

The MVS-21 can easily be controlled by other third party control devices from Crestron and QSC and more.

8×8 4K60 HDMI to HDBaseT/HDMI Matrix Switcher with Audio De-Embed and PoC

The HDTools™ HTX III-8800 provides matrix switching and extension up to 150 meters (492 feet) of (8) Ultra HD/4K sources via HDBaseT™ (with HTX III-RX receivers, sold separately). Each HDBaseT output includes a mirrored local HDMI output on the matrix. The HTX III-8800 also features de-embedding of balanced stereo analog audio and SPDIF on the switch for each output, and unbalanced stereo analog de-embedding on each Receiver.

The HTX III-8800 is HDCP 2.2 compliant, provides IR and RS232 extension, and offers PoC power for all HDBaseT Receivers.

The HTX III-8800 is perfect for:

• Conference Rooms
• Hospitality and Convention Halls
• Corporate
• Entertainment
• Retail
• Home Theater
• and much more…

Couple the HTX III-8800 with the iCON Control System for easy implementation of Video/Audio/IR/RS232 matrixing and control of your space.

Crestron and QSC modules are also available for the HTX III-8800 as well as an intuitive API for developing control modules for other third party control systems.

4×4 4K60 HDMI to HDBaseT/HDMI Matrix Switcher with Audio De-Embed and PoC

The HDTools™ HTX III-4400 provides matrix switching and extension up to 150 meters (492 feet) of (4) Ultra HD/4K sources via HDBaseT™ (with HTX III-RX receivers, sold separately). Each HDBaseT output includes a mirrored local HDMI output on the matrix. The HTX III-4400 also features de-embedding of balanced stereo analog audio and SPDIF on the switch for each output, and unbalanced stereo analog de-embedding on each Receiver.

The HTX III-4400 is HDCP 2.2 compliant, provides IR and RS232 extension, and offers PoC power for all HDBaseT Receivers.

The HTX III-4400 is perfect for:

• Conference Rooms
• Hospitality and Convention Halls
• Corporate
• Entertainment
• Retail
• Home Theater
• and much more…

Couple the HTX III-4400 with the iCON-10W 10 button controller for easy implementation of Video/Audio/IR/RS232 matrixing and control of your space.

Crestron and QSC modules are available for the HTX III-4400 as well as an intuitive API for developing control modules for other third party control systems.

8-Source UHD 4K Multiviewer with Airplay, Miracast, HDMI, USB-C, VGA

Introducing the new 4K Collaboration Hub with multiview and support for virtually any type of source making huddling and collaborating simple. Easily connect and show up to 8 devices simultaneously including iPhones, iPads, Android phones, Windows or Mac laptops, and local sources such as HDMI, USB-C and VGA. Connect over WiFi, wireless dongle, or direct connection. It’s that simple, not a lot of conversation needed, just get up and running.

Alongside any of our products is PureLink’s industry famous technical support to assist you along with way if needed.

The Collabora 8 4K Multiviewer provides easy display of up to eight sources simultaneously, including Apple Airplay (iPhone, iPad), Google Miracast (Android phones, Chrome devices), USB dongle (Windows, Mac laptops), along with two HDMI inputs, one USB-C input, and one VGA input. 

Work and collaborate with others easily. The Collabora 8 4K is an excellent fit for:

• Huddle Rooms
• Conference Rooms
• Presentation
• House of Worship
• Higher Education

4K UHD HDMI Video Wall Processor/Switcher with IP/Audio/RS-232

Introducing the BG-UHD-VW24 HDMI 2.0 video wall controller from BZBGEAR, an innovative solution for all your video wall processing needs. This powerful controller features 2 HDMI inputs and 2 HDMI loop outs, as well as 4 HDMI scaling outputs, providing seamless and efficient video processing.

With support for resolutions up to 3840x2160@60Hz, this HDMI 2.0 device ensures stunning video quality and optimal viewing experience. The BG-UHD-VW24 also supports HDCP 2.2, ensuring that it is fully compatible with the latest content protection standards.

One of the unique features of the BG-UHD-VW24 is its ability to compensate for bezels in two modes, allowing for optimal display of content across multiple displays. Ability to control resolutions of the output displays and configure the brightness, contrast, saturation, and sharpness of each output further enhancing the viewing experience. Additionally, the controller provides the flexibility of 180° display rotation.

The BG-UHD-VW24 is controllable via PC software, webGUI, and RS232, giving users the freedom to choose the most convenient control option. The device also includes a de-embedding audio feature, which allows audio to be sent to an Analog L/R audio output via 3.5mm Stereo Jack or a balanced audio output port using a 5-pin phoenix connector.

Overall, the BG-UHD-VW24 video wall controller from BZBGEAR is an excellent choice for anyone looking for a reliable, efficient, and versatile video processing solution. Whether you're in the digital signage business or require video processing to improve your entertainment systems, the BG-UHD-VW24 is the perfect choice.

INTERFACES

1. CONTROL:
   RS232: Loop out RS232-CTL control command.
   RS232-CTL: External RS232 control, Baud Rate: 57600, Data Bits: 8, Parity: None Stop Bits: 1.
   LAN: Network port for TCP/IP control. Connect to an active Ethernet link with an RJ45 cable.
2. SERVICE: Firmware update port.
3. AUDIO OUTPUTS:
   Analog L/R audio output: 3.5mm Stereo Jack. 20Hz ~ 20kHz, 1.5Vrms max.
   BALANCED OUT: Balanced audio output port. 5-pin phoenix connector, 20Hz ~ 20kHz, 1.5Vrms max.
4. GND: Ground the product housing.
5. 12V/3A: DC 12V/3A power supply port.
6. OUTPUTS: HDMI output for the video wall.
7. LOOP OUT: Loop out the HDMI A/B signal to a local display connected to each output.
8. INPUTS: Connect HDMI source devices such as a DVD player or gaming console with an HDMI cable.
9. Power LED indicator: The power LED will illuminate when the unit is powered on.
10. INPUT LED indicators: The LED will illuminate when the corresponding HDMI input port is connected to an active HDMI source device.
11. LOOP LED indicators: The LED will illuminate when the corresponding LOOPOUT port is connected to an HDMI display device.
12. OUTPUT LED Indicators: The LED will illuminate when the corresponding HDMI output port is connected to an HDMI display device.

4×4 4K UHD Seamless HDMI Matrix Switcher/Video Wall Processor/MultiViewer Over Cat5/6/7 with 4xReceiver Kit

Introducing the BG-4K-VP44PRO: Your Ultimate 4x4 HDMI 2.0 CAT5/6/7 Seamless Matrix. Experience the next level of video distribution with the BG-4K-VP44PRO, a versatile all-in-one solution that's redefining the audiovisual landscape. Packed with advanced features like video wall and multi-view modes, this device unleashes a new era of flexibility, empowering your audiovisual setup with unmatched signal extension capabilities for even the most expansive spaces. Its sophisticated audio matrixing ensures crystal-clear sound, while the Power over Cable (PoC) functionality eliminates cable clutter, streamlining your setup and providing a cleaner, more efficient solution. Upgrade your AV setup today with the BG-4K-VP44PRO and elevate your entertainment experience to new heights.

CONNECTIVITY AND QUALITY

Extend your HDMI 2.0 signals up to an impressive 70m(229ft) using a single CAT5/6/7 cable. Enjoy the flexibility to position your devices exactly where you desire, without compromising on signal quality. Immerse yourself in stunning visuals and crystal-clear audio, whether it's for a home theater, corporate environment, or event space.

The BG-4K-VP44PRO's audio matrix capabilities offer unparalleled versatility. Seamlessly distribute audio signals to multiple zones or rooms, creating the perfect soundscape throughout your venue. Host unforgettable events, deliver impactful presentations, or enjoy your favorite music with a level of control that ensures every corner of your space is filled with pristine sound.

Equipped with HDMI inputs, RJ45 outputs, and an HDMI loop-out functionality, this seamless matrix provides extensive connectivity options. Immerse yourself in the brilliance of 4K resolution, 4:4:4 color sampling, and 8-bit color depth, all while maintaining HDCP 2.2 compliance and efficient EDID management. Experience your audiovisual content with remarkable clarity, accuracy, and fidelity, captivating your audience like never before.

SIMPLE INSTALLATION AND CONTROL

Installing and controlling the BG-4K-VP44PRO is a breeze. With multiple control options—including panel buttons, remote control, RS232, TCP/IP, and the BG-SWITCH-CONTROL app, a free BZBGEAR proprietary matrix switcher control software for Windows, Mac, iOS, and Android—you can effortlessly manage the device according to your preferences. The inclusion of PoC functionality optimizes power distribution to receiver units, simplifying the installation process and enhancing overall system reliability. Say goodbye to cable clutter and hello to a streamlined setup that maximizes efficiency without compromising performance.

INTERFACES

4x4 8K UHD HDMI 2.1 Matrix Switcher with Audio De-embedder (8K60, 4K120 4:4:4 10bit VRR, FVA, ALLM support)

With four HDMI 2.1a inputs and four HDMI 2.1a outputs, the BG-8K-44MA 8K HDMI matrix switch allows users to share up to four HDMI sources with up to four displays. Perfect for when you need to change multiple sources to show on various displays or even select just one source to show on all displays with the press of a button. Professional-grade picture and audio quality are achieved with support for 8K resolutions and various high-quality audio formats.

PLAY GAMES AT 4K@120HZ!

For gamers, the ability to display high-resolution graphics at high frame rates is crucial for a smooth and immersive gaming experience. With support for 4K resolution at 120Hz, the BG-8K-44MA can help ensure that your games are displayed with the highest level of detail and fluidity. This is particularly important for fast-paced games where a high frame rate can make a significant difference in your ability to react to in-game events. Whether you're playing competitively or just looking for the most realistic and engaging gaming experience possible, the 8K HDMI 4x4 matrix switcher's support for 4K at 120Hz can help you get the most out of your favorite games.

CONNECTIVITY AND QUALITY

The BG-8K-44MA supports high resolutions up to 8K@60Hz 4:2:0, 8K@30Hz 4:4:4, and 4K@120Hz 4:4:4 with HDR. With 48 Gbps of uncompressed bandwidth, HDMI signals are routed with no loss of quality. All HDMI ports on this matrix are HDCP 2.3 compliant. This device is also equipped with auto Downscaling on all outputs, ensuring compatibility with legacy displays.

The BG-8K-44MA supports Digital S/PDIF and Balanced audio output formats.

CONTROL

The BG-8K-44MA offers multiple control methods including front panel controls, IR remote control, RS-232, or TCP/IP(Web GUI). The included IR receiver allows the unit to be controlled with the included remote while located out of sight for a clean installation.

In addition to a full-featured web interface, the BG-8K-44MA includes control software that can be operated via the RS-232 connection. These interfaces allow users to adjust advanced features like EDID management, mapping, and network settings.

8x8 UHD HDMI 2.1 Matrix Switcher with Audio De-embedder (8K60, 4K120 4:4:4 10bit VRR, FVA, ALLM support)

With eight HDMI 2.1a inputs and eight HDMI 2.1a outputs, the BG-8K-88MA 8K HDMI matrix switch allows users to share up to eight HDMI sources with up to eight displays. Perfect for when you need to change multiple sources to show on various displays or even select just one source to show on all displays with the press of a button. Professional-grade picture and audio quality are achieved with support for 8K resolutions and various high-quality audio formats.

PLAY GAMES AT 4K@120HZ!

For gamers, the ability to display high-resolution graphics at high frame rates is crucial for a smooth and immersive gaming experience. With support for 4K resolution at 120Hz, the BG-8K-88MA can help ensure that your games are displayed with the highest level of detail and fluidity. This is particularly important for fast-paced games where a high frame rate can make a significant difference in your ability to react to in-game events. Whether you're playing competitively or just looking for the most realistic and engaging gaming experience possible, the 8K HDMI 8x8 matrix switcher's support for 4K at 120Hz can help you get the most out of your favorite games.

CONNECTIVITY AND QUALITY

The BG-8K-88MA supports high resolutions up to 8K@60Hz 4:2:0, 8K@30Hz 4:4:4, and 4K@120Hz 4:4:4 with HDR. With 48 Gbps of uncompressed bandwidth, HDMI signals are routed with no loss of quality. All HDMI ports on this matrix are HDCP 2.3 compliant. This device is also equipped with auto Downscaling on all outputs, ensuring compatibility with legacy displays.

The BG-8K-88MA supports Digital S/PDIF and Balanced audio output formats.

4X4 4K UHD Seamless HDMI Matrix Switcher/Video Wall Processor/MultiViewer with Scaler/IR/Audio/IP and RS-232

The BG-4K-VP44 is a powerful video processor and supports four HDMI inputs that can be independently routed to HDMI Outputs. This unit can create video walls, act as a multi-viewer and perform matrix functions! The BG-4K-VP44 supports Video Wall configurations of up to 7 different modes with each monitor. It can also display four pictures on the same screen and has multiple split display modes.

CONNECTIVITY AND QUALITY

With max resolutions up to 4K@60HZ 4:4:4, the BG-4K-VP44 is capable of producing high-quality imagery with pristine detailing and rich color. All HDMI ports on this unit are HDCP 2.2 compliant. This device also supports analog audio extraction, and audio channels can be switched independently.

CONTROL

The BG-4K-VP44 offers multiple control methods including front panel controls, IR remote control, RS-232, or IP control. The included IR receiver allows the unit to be controlled with the included remote while located out of sight for a clean installation.

In addition to a full-featured web interface, the BG-4K-VP44 includes control software that can be operated via the RS-232 connection. These interfaces allow users to adjust advanced features like EDID management, mapping, and network settings.

BZBGEAR 8X8 4K UHD Seamless HDMI Matrix Switcher/Video

The BG-4K-VP88 supports eight HDMI inputs that can be independently routed to HDMI Outputs. This unit can create video walls, act as a multi-viewer and perform matrix functions! The BG-4K-VP88 supports video wall configurations of up to 7 different modes with each monitor. It can also display eight pictures on the same screen and has multiple split display modes.

CONNECTIVITY AND QUALITY

With max resolutions up to 4K@60Hz 4:4:4, the BG-4K-VP88 is capable of producing high-quality imagery with pristine detailing and rich color. All HDMI ports on this unit are HDCP 2.2 compliant. This device also supports analog audio extraction, and audio channels can be switched independently.

CONTROL

The BG-4K-VP88 provides various control methods, including front panel controls, IR remote control, RS-232, and IP control. With the included IR receiver, the unit can be controlled using the provided remote even when placed out of sight, ensuring a neat installation. Additionally, users have the option to utilize the BG-SWITCH-CONTROL app, a proprietary matrix switcher control and management application available for Windows, iOS, Mac, and Android platforms. This software empowers you to effortlessly route sources, manage displays, configure image settings, adjust network settings, and more.

Alongside a comprehensive web interface, the BG-4K-VP88 features control software that can be operated via the RS-232 connection. These interfaces enable users to fine-tune advanced features such as EDID management, mapping, and network settings.

9×9 4K UHD Seamless HDMI Matrix Switcher

The BG-4K-VP99PRO is a highly versatile HDMI matrix switcher/video wall processor/ multiviewer, perfect for professional AV installations. Offering exceptional connectivity with 9 HDMI inputs, outputs, and loopouts, it extends HDMI signals up to 70 meters over CAT5. With support for resolutions up to 4K60Hz 4:4:4 and advanced video processing, it enables seamless switching between video sources, 3x3 video wall creation, and the display of up to 9 sources on one screen. Balanced audio extraction and multiple control options ensure an immersive experience, making it ideal for presentations and conferences. This award-winning product offers a future-proof design with HDCP compliance and firmware updates via a micro-USB port, making it a comprehensive solution for professional AV setups.

UNPARALLELED CONNECTIVITY AND QUALITY

The BG-4K-VP99PRO offers an impressive array of connectivity options to cater to your diverse needs. With 9 HDMI inputs, 9 HDMI loop outs, 9 HDMI outputs, and 9 DSC outputs featuring Power over Cable (POC) support, seamless integration with multiple sources, displays, and audio systems is guaranteed. Additionally, for large-scale AV projects and installations, all HDMI sources can be extended up to 70m(229ft) over CAT5/6/7.

Delivering stunning visuals with exceptional clarity and color reproduction, the BG-4K-VP99PRO supports resolutions up to 4K60Hz 4:4:4. Its impressive bandwidth of 18Gbps ensures the smooth transmission of high-quality content.

SEAMLESS CONNECTIVITY AND FUTURE-PROOF DESIGN

Built-in EDID settings optimize communication between your source devices and displays, ensuring a seamless and reliable connection. HDCP 2.2/1.4 compliance guarantees compatibility with a wide range of devices while protecting your content against unauthorized duplication. Stay up-to-date with the latest features and improvements through the convenient micro-USB port, enabling firmware updates and future enhancements. Enjoy precise and visually appealing video wall configurations with screen edge adjustments. Expand your creative possibilities with 180° rotation and mirror functions offered by the BG-4K-VP99PRO.

ADVANCED VIDEO PROCESSING CAPABILITIES

The BG-4K-VP99PRO offers a range of advanced video processing capabilities, including video signal seamless switching, video wall creation, multiview, and preset settings. Seamlessly switch between video sources for uninterrupted viewing experiences. Create captivating video walls with a maximum configuration of 3x3 screens, allowing you to showcase content across a larger canvas. Display up to 9 sources on a single screen. Save and recall your preferred configurations effortlessly with the matrix switcher’s support for preset settings.

IMMERSIVE AUDIO AND USER-FRIENDLY CONTROL

Experience immersive audio alongside stunning visuals with the BG-4K-VP99PRO's balanced audio extraction support. Ideal for professional presentations, conferences, and professional AV installations, this feature ensures a complete sensory experience.

Installation and control are made convenient and flexible with multiple options. Take advantage of panel buttons, IR remote control, TCP/IP control, RS232 commands, and the BG-SWITCH-CONTROL app, a free BZBGEAR proprietary matrix switcher control software for Windows, Mac, iOS, and Android to easily manage and adjust the matrix switcher’s settings to suit your requirements.

INTERFACES

4K 4×2 Seamless Audio and Video Matrix with Multiview

Evolution Premium 4K HDMI® Splitter

The Evolution by Vanco EVSP4K12, EVSP4K14 and EVSP4K18 with HDCP 2.2, 4K/60Hz, and 4:4:4 chroma capability, are the most up to date HDMI splitters that are compliant with HDCP 2.2 displays and sources. Also features EDID management, with different modes to ensure compatibility with source and display combinations. Supports LPCM 7.1CH, Dolby TrueHD, and DTS-HD Master Audio for advanced audio setups. Take any 4K source and split the signal to multiple 4K displays to ensure the highest quality possible with the Evolution 4K HDMI Splitters!

Note: To achieve 4K video quality, all connected displays must be able to handle 4K resolution. Any lower resolution display connected, will affect the overall resolution the splitters output to all ports.

Evolution 4K HDR 1×4 HDMI Splitter over Cat6 Cable

The EV4K7014 is an HDMI splitter that allows one HDMI input to be split and sent to up to five displays simultaneously. With four outputs over UTP, and one output over HDMI, the EV4K7014 allows for a local display connected, or to daisy chain additional units to gain more outputs. The EV4K7014 includes four receivers (EV4K7014-RX) as a kit, which are PoE, and do not require any power supplies at the display end. Extends 4K@60Hz 4:4:4 with HDR10 and IR control up to 230ft/70m over a single Cat6 cable. IR accessories are included to allow IR pass-through for controlling the source at each UTP display location. For splitting and distributing one single source to multiple displays, while extending over Cat6, the EV4K7014 is a great solution for any application with the ability to expand.

*NOTE - All specifications and ratings for the EV4K7014 have been tested and confirmed using Cat6 cabling. Cat6 or better is strongly recommended for optimum performance, achieving rated distance, and maximizing the resolution capabilities of this product. Cat5e is not recommended and may not achieve distance and/or resolution expectations.

Evolution 4K Multi-Format Wireless Collaboration Switcher

The EVSW4K41 Evolution by Vanco 4K 4x1 wired and wireless collaboration switcher features a wireless Miracast/Airplay input, two HDMI inputs, and one USB-C input to a single HDMI output. Switch from multiple presenters to one display wired or wirelessly. With both Miracast and Airplay support, cast wirelessly from computers, tablets, and mobile devices to the display with ease. Supports HDMI 2.0b, 4K@60Hz, 4:4:4, HDR and HDCP 2.3. HDMI audio de-embedding built in to break out audio to an amplifier or audio distribution system. USB 3.0 device extension by providing two type-B USB ports for host connection, and two type-A USB ports for USB devices such as camera, microphone, keyboard etc., as well as soft codec capabilities to easily integrate with video conferencing software. Control with 3rd party systems via RS232 commands, in addition to manual and “auto” switching modes. For any presentation and collaboration needs that requires multiple presenters to switch to and from wired and wirelessly, with options for audio and USB, the EVSW4K41 is the perfect solution.

BZBGEAR 1X8 4K 18Gbps UHD HDMI HDBaset Splitter

The BG-UDA-E18 is a 1x8 4K HDBaseT splitter/extender kit. Supporting resolutions up to 4K@60Hz, users can extend HDMI sources over category 6 cabling at distances up to 390 feet, or up to 490 feet at 1080P@60Hz with the included HDBaseT extenders. With the ability to connect to one local and eight remote displays, this unit is ideally suited for use in restaurants, sports bars, retail spaces, and auditoriums.

Connectivity and Features

The BG-UDA-E18 supports a maximum resolution of 4K@60Hz 4:4:4. Compliant with HDMI 2.0b, HDCP 2.2, and HDCP 1.x, the transmitter offers EDID management to eliminate HDMI connection problems. The transmitter is equipped with an HDMI loop out connection for connection to a local display. One digital coax and one analog audio phoenix connector provide audio extraction from the source for connection to an external sound system.

Each receiver features Power over Ethernet, eliminating the need for a power supply at the display-end and enabling a clean installation. Each receiver has a 3.5mm stereo output for connection to a local sound source. The slim design of the receivers helps them fit behind the displays, and each one is equipped with RS-232 passthrough and bi-directional IR passthrough for integration with control systems.

BZBGEAR 1X4 4K 18Gbps UHD HDMI HDBaset Splitter

The BG-UDA-E14 is a 1x4 4K HDBaseT splitter/extender kit. Supporting resolutions up to 4K@60Hz, users can extend HDMI sources over category 6 cabling at distances up to 390 feet, or up to 490 feet at 1080P@60Hz with the included HDBaseT extenders. With the ability to connect to one local and four remote displays, this unit is ideally suited for use in restaurants, sports bars, retail spaces, and auditoriums.

Connectivity and Features

The BG-UDA-E14 supports a maximum resolution of 4K@60Hz 4:4:4. Compliant with HDMI 2.0b, HDCP 2.2, and HDCP 1.x, the transmitter offers EDID management to eliminate HDMI connection problems. The transmitter is equipped with an HDMI loop out connection for connection to a local display. One digital coax and one analog audio phoenix connector provide audio extraction from the source for connection to an external sound system.

Each receiver features Power over Ethernet, eliminating the need for a power supply at the display-end and enabling a clean installation. Each receiver has a 3.5mm stereo output for connection to a local sound source. The slim design of the receivers helps them fit behind the displays, and each one is equipped with RS-232 passthrough and bi-directional IR passthrough for integration with control systems.

BZBGEAR HDMI Video Wall Processor & Seamless Matrix Switcher

The BZBGEAR BZ-MVS4X4-4K is a matrix video wall controller that seamlessly switches signals from any of the four HDMI sources to any of the four connected HDMI displays. The four outputs can be configured to create a variety of video wall displays such as a 2x2, 1x4, 1x2, 2x1, and 4x1 video wall. Ideal for integrators, professional broadcasters, restaurant owners, and home theater enthusiasts seeking to create high-end video walls, or control multiple video sources and displays with one device.

Connectivity

The four HDMI ports support video bandwidths of 18Gbps and resolutions up to 4K@60Hz (4:4:4). The HDMI ports are HDMI 2.0 and HDCP 2.2 compliant. Each HDMI input features stereo audio embedding via the phoenix connectors on the back panel. The device is equipped with four stereo audio outputs and four TOSLINK S/PDIF ports for analog and digital audio de-embedding.

Control

The BZ-MVS4X4-4K can be configured and controlled using the PC Tool software via the LAN or RS-232 connections. Smart EDID management via the front panel buttons or web interface eliminate HDMI handshake issues for fast and reliable input switching. The HDMI CEC provides power and volume control of compatible monitors. Access basic control of the matrix switcher and network settings with the conveniently built-in WebGUI interface.

Complete with front panel buttons for quick and handy operation, the BZ-MVS4X4-4K’s flexible features make it an exceptional choice for designing outstanding video walls with flexible display control and connectivity.

BZBGEAR 8X8 4K 18Gpbs UHD HDMI/HDBaseT Matrix Switcher

This HDMI matrix extender can connect eight HDMI sources to sixteen output displays. This is accomplished using four HDMI outputs mirrored to four HDBaseT outputs that run simultaneously. The HDBaseT output allows video signals to be extended to longer ranges than a standard HDMI cable. When using 1080p resolution, the signal can travel up to 492ft / 150m and 394ft / 120m at 4K.

Connectivity

The maximum resolution of this matrix is 4K@60Hz (YUV 4:4:4) on all HDMI and HDBaseT ports. Data transmission is lossless and uncompressed, having a maximum bandwidth of 18Gbps, ensuring pure signal transfer for maximum image quality. The BG-UM88-150L-KIT utilizes HDMI 2.0b. The device is also HDCP 2.2 and HDCP 1.x compliant.

Operators also have the ability to downscale video from 4K to 1080p if necessary for each output port. Power over cable is supported on all HDBaseT ports, eliminating the need for an external power supply at the HDBaseT receiver.

HDMI audio pass-through allows operators to handle high quality sound up to 7.1 CH HD audio. Various audio codecs are also supported, including LPCM, Dolby TrueHD, and DTS-HD Master Audio. Audio can be de-embedded from the unit as well via analog and digital coax ports.

Control

The BG-UM88-150L-KIT can be controlled via buttons on the front panel, an IR remote, RS-232, LAN, and a web GUI. Advanced EDID management and CEC control are also available with this matrix. Bi-directional IR matrix routing is also supported, ensuring simple remote control of the currently selected video source as well as remote control of displays from the source location.

BZBGEAR 4X4 4K 18Gbps UHD HDMI/HDBaseT Matrix Switcher

This HDMI matrix extender enables operators to connect four HDMI sources to up to eight displays. This is accomplished using four HDMI outputs mirrored to four HDBaseT outputs that run simultaneously. The HDBaseT output allows video signals to be extended to longer ranges than a standard HDMI cable. When using 1080p resolution, the signal can travel up to 492ft / 150m and 394ft / 120m at 4K.

Connectivity and Quality

The maximum resolution of this matrix is 4K@60Hz (YUV 4:4:4) on all HDMI and HDBaseT ports. Data transmission is lossless and uncompressed, having a maximum bandwidth of 18Gbps, ensuring pure signal transfer for maximum image quality. The BG-UM44-150L-KIT utilizes HDMI 2.0b. The device is also HDCP 2.2 and HDCP 1.x compliant.

Operators also have the ability to downscale video from 4K to 1080p if necessary for each output port. Power over cable is supported on all HDBaseT ports, eliminating the need for an external power supply at the HDBaseT receiver.

HDMI audio pass-through allows operators to handle high quality sound up to 7.1 CH HD audio. Various audio codecs are also supported, including LPCM, Dolby TrueHD, and DTS-HD Master Audio. Audio can be de-embedded from the unit as well via analog and digital coax ports.

Control

The BG-UM44-150L-KIT can be controlled via buttons on the front panel, an IR remote, RS-232, LAN, and a web GUI. Advanced EDID management and CEC control are also available with this matrix. Bi-directional IR matrix routing is also supported, ensuring simple remote control of the currently selected video source as well as remote control of displays from the source location.

 2.0 HDBaseT 4x4 Matrix w/HDMI mirroring outputs & Downscaling, 4K/60Hz

EVMX44PRO

The Evolution by Vanco EVMX44PRO 4K 4x4 HDBaseT™ Audio and Video Matrix Switcher with ARC, IR, IP and RS-232 allows 4 HDMI sources to be distributed to up to 4 displays simultaneously, with mirrored HDMI outputs for a total of 8 outputs! The EVMX44PRO is capable of transmitting 4K@60Hz, 4:4:4 Chroma Subsampling, and HDR up to 131ft/40m over a single Cat6 cable, and 4K@60Hz, 4:4:4 Chroma Subsampling with HDR10 and Dolby Vision on the HDMI inputs and HDMI outputs. For control, the EVMX44PRO features multiple methods including simple control using the front panel control, IR control, RS-232, and an easy to use UI accessible via IP. Control switching sources to displays from a computer or a wireless device such as a tablet or mobile phone. Need an audio matrix as well? The EVMX44PRO also features the ability to send any HDMI audio input to up to 4 zones. Compatible with both the EVRXHD2 and EVRXDSC HDBaseT receivers to create a modular matrix unit, add downscaling, ARC, audio extraction, and RS-232 to any HDBaseT output. For switching multiple sources to multiple displays using HDBaseT technology, with many features for control, audio switching, ARC, 4K HDR resolution, and scaling, the EVMX44PRO is a great choice for any application.

EVMX88PRO

The Evolution by Vanco EVMX88PRO 4K 8x8 HDBaseT™ Audio and Video Matrix Switcher with ARC, IR, IP and RS-232 allows 8 HDMI sources to be distributed to up to 8 displays simultaneously, with mirrored HDMI outputs for a total of 16 outputs! The EVMX88PRO is capable of transmitting 4K@60Hz, 4:4:4 Chroma Subsampling, and HDR up to 131ft/40m over a single Cat6 cable, and 4K@60Hz, 4:4:4 Chroma Subsampling with HDR10 and Dolby Vision on the HDMI inputs and HDMI outputs. For control, the EVMX88PRO features multiple methods including simple control using the front panel control, IR control, RS232, and an easy to use UI accessible via IP. Control switching sources to displays from a computer or a wireless device such as a tablet or mobile phone. Need an audio matrix as well? The EVMX88PRO also features the ability to send any HDMI audio input to up to 8 zones. Compatible with both the EVRXHD2 and EVRXDSC HDBaseT receivers to create a modular matrix unit, add downscaling, ARC, audio extraction, and RS-232 to any HDBaseT output. For switching multiple sources to multiple displays using HDBaseT technology, with many features for control, audio switching, ARC, 4K HDR resolution, and scaling, the EVMX88PRO is a great choice for any application.

The BG-UHD-QVP-4X2 is a 4K Quad-View/Multi-Viewer Video Processor suitable for digital signage, presentation spaces, conference rooms, and live or recorded broadcasting. The integrated USB 3.0 capture and auto-scaling outputs at resolutions up to 1080p with 2 channel for use with online conferencing apps like Skype, Zoom, vMix, or OBS Studio. The unit is capable of routing ultra-high definition video sources from four UHD HDMI input sources to the two HDMI display outputs and one HDMI loop output simultaneously while delivering resolutions up to 4K2K@60Hz 4:4:4 using HDMI 2.0a technology. It can also extract audio via the 3.5mm output.

Control options include the front panel, a built-in web interface, and third-party control via RS-232 and IR. Simply select a customizable layout, choose your inputs and route them to the desired display windows. Packed with options including PIP, PBP, fade-in/out, blend, zoom, and more the BG-UHD-QVP-4X2 gives you studio-quality results with every presentation.

The 4X4 HDMI and HDBaseT Matrix Switch can connect four HDMI sources to eight displays. It features four HDMI outputs with each HDMI output mirrored to a simultaneous HDBaseT output. The HDBaseT output can extend video transmission distance up to 328ft / 100 meters via a single cat5e/6/7 cable at resolutions up to 4K@60Hz 4:4:4.
This product performs full IR and audio matrix switching. With the ARC function, it can return the audio signal from an HDMI or HDBaseT display device to the coaxial audio output. It can also extract the audio signal from HDMI source devices to the analog audio output. Each extender features bi-directional IR, RS232, and 2 LAN ports for IP Control. The base unit has an intuitive set of front panel controls with OLED screen and also supports control using IR, RS-232, IP, and Web GUI.
The BG-UM44-100M-KIT is loaded with all the features you need to form the core of a future-proof A/V Distribution system. Contact a friendly BZB sales engineer today to order yours!

The BG-UHD-DA1X16 can distribute one HDMI input to sixteen HDMI outputs. The splitter supports 4K signals up to 4K@60Hz 4:4:4, HDR 10, Dolby Vision and features advanced EDID management option using 4-pin DIP switch on the front panel of the unit. It also supports downscaling so a 4K video input can automatically be down scaled to a 1080p output when connecting a display that only supports resolution up to 1080p. Stereo analog L/R audio output is provided for audio de-embedding from HDMI input and the splitter supports CEC and RS232 control.

Metra 1 X 4 HDMI® Splitter Extender

Supporting 1080P over category cable, the Metra Home Theater CS-1X4HDSPLEXT is a great way to share ah HDMI based source to 4 displays with category cable wiring.

Tenda 24-Port With 4 Shared SFP PoE Managed Switch

TEG3224P, launched by Tenda, is designed for building more secure and smart wireless network. Providing 24 10/100/1000 auto-negotiation RJ-45 ports and 4 reusable Base-X SFP ports, its RJ45 ports support both IEEE 802.3af (15.4W) and 802.3at (30 W) standard. In addition, it provides ARP attack defense, worm attack defense, IP+MAC+PORT+VLAN Bind, MAC filter and other safety settings through visual WEB interface operations. On the basis of high performance access, it provides a protective system with security of high level, perfect QoS strategy, rich VLAN function and greater ease of use of network administration and maintenance. It is best choice for your network.