Specialty Testers

Jonard Tools Fiber Power Meter & Optical Light Source Kit

This tool kit provides everything you need to measure power and provide a stable light source for fiber optic cable testing.

Jonard Tools Fiber Power Meter With Data Storage

This tool kit provides everything you need to measure power and provide a stable light source for fiber optic cable testing. This kit includes:

• The FPM-55 Fiber Optic Power Meter for measuring wavelengths from 800-1650 nm, with a mere 0.01 dB resolution
  • Measures 6 preset calibrated wavelengths with high precision to determine absolute or relative power
  • Stores up to 1,000 data entries which can be downloaded via USB
  • Includes FC/SC adapters for APC/PC/UPC connectors and an LC adapter for PC/UPC connectors only
• The FLS-55 Fiber Optic Light Source for providing a stable light source at 850/1300 nm for multimode or 1310/1550 nm wavelengths singlemode fiber measurements
  • Has four different modulation outputs (CW, 270 Hz, 1 kHz, 2 kHz) at 1310 nm and 1550 nm wavelengths
  • Includes FC, SC, and LC adapters to directly connect to UPC/PC FC, SC, and LC fiber connectors
• A FREE BAG! The H-22 Rugged Carrying Case with Straps ($35 value)!
• Nylon Carry Case (FPM-55)
• Storage Pouch (FLS-55)
• With both the FPM-55 and FLS-55
  • Instruction Manuals
  • (3) AA Batteries each (required for operation)
  • (2) Cleaning Swabs each
  • FC Adapter, LC Adapter, and SC Adapters

Broad Range Non-Contact Voltage Tester

Klein's Broad-Range High-Voltage Non-Contact Tester detects voltage up to 230kV AC in overhead conductors. The tester indicates the presence of voltage through multiple sensitivity levels with both audible and visual signals. Attach the tester directly to a hot stick or use the universal adapter to attach it to your shotgun.

Basic Fiber Testing Kit

The SSF-TKITE-200 from Cleerline Technology Group is a versatile and user-friendly fiber testing kit designed to support efficient optical link qualification and troubleshooting for both single-mode and multimode fiber networks. This compact and comprehensive solution includes an optical power meter and two optical light sources to provide all the essential tools for accurate testing, power loss calculation, and maintenance of installed fiber.

Enclosed in a rugged carrying case and equipped with various adapters and reference cables, the SSF-TKITE-200 is ideal for field technicians and network installers seeking a reliable and portable solution.

Underground Wire Tracer and Circuit Finder

Perfect for tracing cables up to 7 ft underground, locating breaks, or tracing a circuit back to the breaker; the WCT-700 is an all in one solution for any cable tracing task.

Jonard Tools Fiber Optic Light Source Multimode & Singlemode

Designed to provide 850/1300 nm or 1310/1550 nm wavelengths, this optical light source is the perfect tool for providing a stable light source for multimode or single mode fiber measurements.

Fiber Optic Inspection Probe Kit

The OPTIX America FIP-82 handheld fiber optic inspection probe is a portable video microscope used to examine installed fiber terminations and verify that they are smooth and clean. With the appropriate adapters, it can inspect virtually any type of fiber optic termination. This kit includes six precision adapter tips for multimode and singlemode fiber end-face analysis, which attach easily to the end of the probe. Additional adapter tips are available for other termination types. The monitor provides a 3.5" high-precision LCD display that delivers real-time, high-resolution images of the connector end face at 250x magnification with no latency. The monitor and probe feature intuitive controls for image focus, brightness level and battery indicator. A protective elastomeric shell surrounds the monitor to guard against drops.

WiFi Inspection Probe with Rechargeable Battery

The Optix America WiFi Fiber Optic Inspection Probe is a portable inspection system that pairs seamlessly with iOS and Android smart devices, enabling fast and accurate analysis of fiber optic connector end-face cleanliness. With a single press of a button, the probe captures, centers, and evaluates the end-face image based on user-defined criteria, streamlining the inspection process. Equipped with a high-definition CCD camera and precision optics, the probe delivers sharp, detailed images directly to a mobile device. Users can magnify images up to 200×, capture photos, and record inspection results for documentation and analysis. The system includes six interchangeable adapter tips to support a wide range of fiber inspection applications. Additional optional tips are available, including configurations for MPO/APC female and MPO/UPC female connectors.The WIFI-P8 inspection kit comes complete with a WiFi-enabled inspection probe featuring a rechargeable battery, six precision adapter tips, power adapter, user guide, and a protective soft carrying case.

Visual Fault Locator for MPO Fiber

As demand for MPO fiber optic cabling continues to grow, OPTIX America is proud to introduce the MPO Visual Fault Locator — an essential troubleshooting tool for continuity verification and macro-bend detection in MPO optical systems. Rugged, weather-resistant, and shock-resistant, this unit delivers 10mW of output power and is available in 12,16, or 24 channel configurations. Transition cables are also available in 24 to 16, 24 to 12, and 16 to12 fiber configurations, ensuring compatibility across a range of setups. The MPO Visual Fault Locator works with both singlemode and multimode fiber and is powered by a rechargeable 5V lithium battery with USB Type-C charging for fast, convenient charging in the field.

Optical Fiber Identifier

The Optix America OFI-28 Optical Fiber Identifier with integrated VFL and Optical Power Meter utilizes advanced macro-bending technology to perform non-destructive live fiber detection. It enables users to identify signal presence, direction, and relative power levels at any point along singlemode or multimode fibers, supporting cable diameters of 250µm, 900µm, 2mm, and 3mm. The universal adapter design accommodates multiple fiber sizes without the need to change clamp blocks, improving efficiency in the field.

Equipped with a built-in 10mW Visual Fault Locator (VFL) and optical power meter, the OFI-28 allows for quick fault location and accurate optical power measurement on the tested fiber. Additionally, the unit features a low battery monitoring function that alerts users when battery replacement is required, ensuring reliable operation during critical tasks.

SM+MM Optical Light Source

The WRX281 Optical Light Source is a precision fiber optic test instrument designed for fiber link continuity verification, fault diagnosis, and insertion loss testing. Supporting multimode and singlemode operation at 850nm, 1300nm, 1310nm, and 1550nm wavelengths, it features adjustable optical output power up to 6 dB, continuous wave and modulated output modes, automatic power-off, wavelength memory, and a backlit LCD display. Powered by a 1500 mAh rechargeable lithium battery, it provides up to 24 hours of operation and includes a universal 2.5 mm interface with a 1.25 mm adapter. When used with the WRX280 Optical Power Meter, it enables accurate bidirectional loss and continuity testing of optical fiber links.

OLTS Fiber Test Kit

The OPTIX Fiber Link Test Kit is the comprehensive, all-in-one solution for testing and qualifying optical links, as well as verifying fiber cables before deployment. Combining an Optical Power Meter and Optical Light Source, it enables fast, accurate troubleshooting of both single-mode and multimode fibers across four key wavelengths - 850, 1300, 1310, and 1550 nm. It simplifies optical power loss measurements and supports storage of up to 500 test records with seamless PC software export. The complete kit includes SC and LC adapters, reference cords, bare fiber adapters, a scribe tool, a visual fault locator, connector cleaning pens, and a rugged carrying case - ensuring reliable and efficient field testing.

WRX1000H Handheld OTDR Singlemode

The WRX1000H series handheld optical time domain reflectometer (OTDR) offers precise measurement of fiber length, splice loss, and the location of fiber faults. It features a 3.5-inch capacitive touch screen and integrates multiple functions, including OTDR, event map, OPM, LS, VFL, RJ45 sequence test, optical loss test, and flashlight. The touchscreen allows for simple and efficient operation through single parameter setting and intelligent measurement. Key specifications of the WRX1000H include a dynamic range of 24dB or 22dB, an event dead zone of less than 2.5m, and an attenuation dead zone of less than 8.0m, ensuring accuracy and reliability in field use. With a high sampling rate of 128k, it can detect defects as small as 1 meter. It supports external USB storage, capable of storing up to 1000 test curves, and is equipped with a 4000mAh high-density lithium battery that provides up to ten hours of testing time and twenty hours of standby time with intelligent power saving management. Additionally, the filter model supports online testing with a maximum online power of -2dB.

WRX3000 OTDR Singlemode

The WRX3000 series optical time domain reflectometer (OTDR) adopts a 4.3 inch capacitive touch screen and integrates twelve functions including auto OTDR, expert OTDR, event map, OPM, RJ45 cable tracker, and “computer level” file management to meet various test requirements. The OTDR has a maximum dynamic range of 26dB, 8G memory, and can store more than 200,000 curves. It is also equipped with a 4000mAh high density polymer lithium battery with intelligent power saving management providing up to twelve hours testing time.

The WRX3000 series is used to measure the length, loss, and connection quality of optical fiber used in engineering construction, line maintenance & testing, emergency repair, and the development and production of optical fiber cables.

WRX5000 OTDR Singlemode + Multimode

The WRX5000 series single mode + multi mode optical time domain reflectometer (OTDR) is the new generation of intelligent tester for the detection of fiber communications systems and optical network construction for outstanding performance and is specially designed for long haul application. This specially designed unit offers a seven inch capacitive touch screen which integrates nine modules. It has excellent accuracy of short fiber test and automatic test and is equipped with a rich ethernet test (Ping/PPOE, etc) and supports APP control. The WRX5000 series is used to measure the length, loss, and connection quality of optical fiber used in engineering construction, line maintenance & testing, emergency repair, and the development and production of optical fiber cables.

Mini OTDR/Copper Tester (1310/1550nm)

The PT-OTDR-100 mini OTDR tester provides a simple to setup and easy to use solution for OTDR testing. Includes a 5.5 inch OLED touch screen for easy viewing of cable tests and can save and export your OTDR tests. This unit will perform OTDR tests, OPM, VFL and laser source functionality for fiber optic cable, and will also perform continuity testing and TDR for Category cable

MULTI-FUNCTIONAL TESTING

Multiple tests offered for both Fiber and Copper testing

COMPACT FORM FACTOR

Ruggedized form factor with a 4-6hr battery life, or charge on the go!

ACTIVE NETWORK TESTING

LLDP, PPPoE, IP Scan, & Ping testing all-in-one.

ACCESSIBLE PRICING

Priced to supply every truck and technician.

ST-R301HOLDERKIT – 3 x 250um, 2 x 900um fiber holders

SimplyTEST™ – Fiber Holder Kit: Precision & Speed for Splicing – 5 x 250um, 2 x 900um fiber holders

Maximize your splicing efficiency and consistency with the Fiber Holder Kit. Designed for seamless integration with your cleavers and fusion splicers, these holders ensure perfect fiber placement every time.

ST-R240VIP – FiberMASTER Video Inspection Probe

FiberMASTER Video Inspection Probe

ST-R240SIPV – FiberMASTER Single-mode OTDR

FiberMASTER Single-mode OTDR (1310/1550) with SC connector, Inspection port, Power meter

Test, Troubleshoot and Certify cabling faster with the FiberMASTER OTDR.

The FiberMASTER OTDR is available in 4 options, Quad, multimode, singlemode and PON.

The OTDRs feature both high dynamic range and small dead zones providing the precision required for installation and troubleshooting alike. The software simplifies certification of cabling to meet TIA/ISO/IEC/IEEE requirements with simple pass/fail results. Additionally custom test parameters are easily set to accommodate any application.

OTDRs can be complicated to configure and achieve accurate results. FiberMASTER automates testing and steps you through the process as shown below.

For FTTx/FTTH applications the PON OTDR identifies split ratios for easy testing and troubleshooting of inactive and active networks. The 1625nm wavelength allows in-service testing of networks without interrupting existing subscribers.

Why do I need a FiberMASTER?

It depends how important speed and accuracy are to you.

FiberMASTER – size, simplicity and value without compromise, made in the USA, tested in Germany.

The new FiberMASTER series of fiber optic testers will make it easier and faster to verify, troubleshoot and certify fiber optic cabling.
The OTDR, PON OTDR, Power Meter and Light Source, and Inspection Probe will enable cable installers to get the dependable test results needed, while saving thousands of dollars.
As one of the smallest OTDRs in the world you will find them easier to carry and operate while the rubberized housing will protect your investment. The simplified setup options makes them easy to use, saving you time on training and reducing the likelihood of errors.

Our New York Research and Development center of excellence has over 30 years experience designing OTDRs providing you with the most advanced, compact optical test systems available.

ST-R240QIP – FiberMASTER Quad OTDR

FiberMASTER Quad OTDR (850/1300/1310/1550) with SC connectors, Inspection port, Power meter

Test, Troubleshoot and Certify cabling faster with the FiberMASTER OTDR.

The FiberMASTER OTDR is available in 4 options, Quad, multimode, singlemode and PON.

The OTDRs feature both high dynamic range and small dead zones providing the precision required for installation and troubleshooting alike. The software simplifies certification of cabling to meet TIA/ISO/IEC/IEEE requirements with simple pass/fail results. Additionally custom test parameters are easily set to accommodate any application.

OTDRs can be complicated to configure and achieve accurate results. FiberMASTER automates testing and steps you through the process as shown below.

For FTTx/FTTH applications the PON OTDR identifies split ratios for easy testing and troubleshooting of inactive and active networks. The 1625nm wavelength allows in-service testing of networks without interrupting existing subscribers.

Why do I need a FiberMASTER?

It depends how important speed and accuracy are to you.

FiberMASTER – size, simplicity and value without compromise, made in the USA, tested in Germany.

The new FiberMASTER series of fiber optic testers will make it easier and faster to verify, troubleshoot and certify fiber optic cabling.
The OTDR, PON OTDR, Power Meter and Light Source, and Inspection Probe will enable cable installers to get the dependable test results needed, while saving thousands of dollars.
As one of the smallest OTDRs in the world you will find them easier to carry and operate while the rubberized housing will protect your investment. The simplified setup options makes them easy to use, saving you time on training and reducing the likelihood of errors.

Our New York Research and Development center of excellence has over 30 years experience designing OTDRs providing you with the most advanced, compact optical test systems available.

ST-R240PMLS – FiberMASTER Power Meter and Light Source

FiberMASTER Multimode/single-mode power meter and quad light source kit, with Inspection port, VFL

Test, Troubleshoot and Certify cabling faster with the FiberMASTER OTDR.

The FiberMASTER OTDR is available in 4 options, Quad, multimode, singlemode and PON.

The OTDRs feature both high dynamic range and small dead zones providing the precision required for installation and troubleshooting alike. The software simplifies certification of cabling to meet TIA/ISO/IEC/IEEE requirements with simple pass/fail results. Additionally custom test parameters are easily set to accommodate any application.

OTDRs can be complicated to configure and achieve accurate results. FiberMASTER automates testing and steps you through the process as shown below.

For FTTx/FTTH applications the PON OTDR identifies split ratios for easy testing and troubleshooting of inactive and active networks. The 1625nm wavelength allows in-service testing of networks without interrupting existing subscribers.

Why do I need a FiberMASTER?

It depends how important speed and accuracy are to you.

FiberMASTER – size, simplicity and value without compromise, made in the USA, tested in Germany.

The new FiberMASTER series of fiber optic testers will make it easier and faster to verify, troubleshoot and certify fiber optic cabling.
The OTDR, PON OTDR, Power Meter and Light Source, and Inspection Probe will enable cable installers to get the dependable test results needed, while saving thousands of dollars.
As one of the smallest OTDRs in the world you will find them easier to carry and operate while the rubberized housing will protect your investment. The simplified setup options makes them easy to use, saving you time on training and reducing the likelihood of errors.

Our New York Research and Development center of excellence has over 30 years experience designing OTDRs providing you with the most advanced, compact optical test systems available.

ST-R240PMIV – FiberMASTER MM/SM Power Meter

FiberMASTER Multimode/single-mode power meter with interchangable SC/SC/FC connectors, Inspection port, VFL

ST-R240PIP – FiberMASTER PON OTDR

FiberMASTER PON OTDR (1310/1550/1625) with SC-APC connectors, Inspection port, Power meter

Test, Troubleshoot and Certify cabling faster with the FiberMASTER OTDR.

The FiberMASTER OTDR is available in 4 options, Quad, multimode, singlemode and PON.

The OTDRs feature both high dynamic range and small dead zones providing the precision required for installation and troubleshooting alike. The software simplifies certification of cabling to meet TIA/ISO/IEC/IEEE requirements with simple pass/fail results. Additionally custom test parameters are easily set to accommodate any application.

OTDRs can be complicated to configure and achieve accurate results. FiberMASTER automates testing and steps you through the process as shown below.

For FTTx/FTTH applications the PON OTDR identifies split ratios for easy testing and troubleshooting of inactive and active networks. The 1625nm wavelength allows in-service testing of networks without interrupting existing subscribers.

Why do I need a FiberMASTER?

It depends how important speed and accuracy are to you.

FiberMASTER – size, simplicity and value without compromise, made in the USA, tested in Germany.

The new FiberMASTER series of fiber optic testers will make it easier and faster to verify, troubleshoot and certify fiber optic cabling.
The OTDR, PON OTDR, Power Meter and Light Source, and Inspection Probe will enable cable installers to get the dependable test results needed, while saving thousands of dollars.
As one of the smallest OTDRs in the world you will find them easier to carry and operate while the rubberized housing will protect your investment. The simplified setup options makes them easy to use, saving you time on training and reducing the likelihood of errors.

Our New York Research and Development center of excellence has over 30 years experience designing OTDRs providing you with the most advanced, compact optical test systems available.

ST-R240MIPV – FiberMASTER Multimode OTDR

FiberMASTER Multimode OTDR (850/1300) with SC connector, Inspection port, Power meter

Test, Troubleshoot and Certify cabling faster with the FiberMASTER OTDR.

The FiberMASTER OTDR is available in 4 options, Quad, multimode, singlemode and PON.

The OTDRs feature both high dynamic range and small dead zones providing the precision required for installation and troubleshooting alike. The software simplifies certification of cabling to meet TIA/ISO/IEC/IEEE requirements with simple pass/fail results. Additionally custom test parameters are easily set to accommodate any application.

OTDRs can be complicated to configure and achieve accurate results. FiberMASTER automates testing and steps you through the process as shown below.

For FTTx/FTTH applications the PON OTDR identifies split ratios for easy testing and troubleshooting of inactive and active networks. The 1625nm wavelength allows in-service testing of networks without interrupting existing subscribers.

Why do I need a FiberMASTER?

It depends how important speed and accuracy are to you.

FiberMASTER – size, simplicity and value without compromise, made in the USA, tested in Germany.

The new FiberMASTER series of fiber optic testers will make it easier and faster to verify, troubleshoot and certify fiber optic cabling.
The OTDR, PON OTDR, Power Meter and Light Source, and Inspection Probe will enable cable installers to get the dependable test results needed, while saving thousands of dollars.
As one of the smallest OTDRs in the world you will find them easier to carry and operate while the rubberized housing will protect your investment. The simplified setup options makes them easy to use, saving you time on training and reducing the likelihood of errors.

Our New York Research and Development center of excellence has over 30 years experience designing OTDRs providing you with the most advanced, compact optical test systems available.

Professional Fiber Testing Kit With Data

The SSF-TKITP-500 Professional Fiber Testing Kit is a high-quality solution for fiber certification in accordance with TIA-568-C standards. This kit includes an Optical Power Meter and Light Source to test both multimode and single-mode installed fibers. Four wavelengths, with a range of 70 decibels (dB). The Light Source and Power Meter measure link loss, allowing calculation of the link loss budget.

The test kit is designed for efficiency and ease of operation. Features include storage of up to 1000 test records. Data can be exported to CSV via downloadable software (PC only).

The test kit provides SC testing by default. LC testing is available with use of the included LC adapter and reference cables in the full reference cable pack. Adapters for FC-ST terminated cables are also included. All kit items are contained in a sturdy case for easy access in the field.

The SSF-TKITP-500 provides detailed fiber certification in accordance with TIA-568-C standards.

Wireless Fiber Inspection Microscope

This portable Wi-Fi end-face probe provides clear high-resolution images of fiber optic connector ferrules in real time on a smart mobile device or tablet. It also features a One Press automatic analyze function, which automatically generates and records a Pass/Fail report.

Advanced Optical Fiber Identifier w/ Power Meter & VFL

Designed to quickly identify the direction of light being transmitted in the fiber and display the relative core power without damaging the fiber. This fiber identifier is the perfect tool for identifying fiber in network systems without disrupting the network and includes a built-in VFL and Power Meter for convenience. This fiber identifier also features the following:

Professional Multi-Function OTDR, 1310/1550 nm

Jonard Tools’ Professional Multi-Function OTDR is the perfect all-in-one handheld device for evaluating FTTx and access network construction and maintenance, identifying fiber breakpoints, measuring cable length, and calculating relative optical power losses

Jonard Tools Multi-Function OTDR

Jonard Tools’ Mini Pro OTDR is the perfect all-in-one handheld device for evaluating FTTx and access network construction and maintenance, identifying fiber breakpoints, measuring cable length, and calculating relative optical power losses.

Jonard Tools Optical Fiber Identifier

Designed to quickly identify the direction of transmitted fiber and display the relative core power without damaging the fiber, this fiber identifier is the perfect tool for identifying fiber in network systems without disrupting the network.

Jonard Tools Dynamometer Force Gauge, 700-4000 g

The Jonard Tools Dial Force Gauges (also referred to as Dynamometer Gauges or Tension Gauges) are all ergonomically designed and have become the industry standard for measuring force.

Innovative FI-60 Design Gives You Two Essential Fiber Tools in One Device

Inadvertently disconnecting active fiber during installation, test and troubleshooting is a common cause of dropped service. The new FI-60 LFI enables users to easily detect the optical signal without having to disconnect the fiber or disrupt network traffic. The unique Viavi Solution® SafeChekTM system ensures safe and repeatable engagement with most fiber types, without the hassle of changing out costly dies.

The FI-60 easily converts to an Optical Power Meter (OPM), providing twice the value for your investment and reducing the number of tools you have to carry on the job. Simply remove the LFI head attachment, connect the corresponding adapter (2.5 or 1.5mm) and insert a connector to measure power. This versatile tool can display, store, and recall optical power measurements for each of the selectable wavelengths. Users can download the stored data onto a PC via USB. The FI-60 also interfaces with FiberChek2, providing integrated inspection and OPM testing and reporting capabilities.

Digital Fiber Inspection Just Got a Whole Lot Easier

Any seasoned veteran of the industry can tell you that setting up a fiber optic network is only one small part of a much larger story. Maintaining and overseeing that network for the long haul is equally important, as this is what will make sure that the network itself is as reliable and as versatile as it needs to be for years to come. Whether you're concerned about routine maintenance or are trying to fix a major problem, your ability to succeed will ultimately rest on the quality of the tools you choose to bring with you... which is why the Viavi FIT-82P01-PRO Digital Fiber Inspection Kit is such an important addition to your existing arsenal.

Even with a quick glance, there's a lot to like about this Viavi Fiber Inspection Kit. It offers you automated (and effortless) pass/fail analysis for all fiber inspection and testing. Not only that, but you can also store ALL fiber inspection and test results on board, giving you access to comprehensive historical logs that allow you to identify trends, patterns and other opportunities for improvement that would have otherwise gone undiscovered. Truly, generating all of the fiber certification reports that you need has never been easier.

This, complete with the simple user interface and the sophisticated 3.5" color touch screen, make the Viavi Fiber Inspection Kit a worth addition to your day-to-day life. You get the peace-of-mind that only comes with knowing you can complete jobs faster, correctly and on time - the first time - all while unlocking the flexibility of a device that is suitable for use anywhere.

Note that when you order directly from FireFold, you also get access to a number of unique advantages that you aren't going to be able to find anywhere else. Not only have we gone to great lengths to guarantee a 100% safe and easy shopping experience, but you also get same day shipping in most situations. Not only that, but you can also enjoy a full lifetime warranty, a 60 day money back guarantee and fast and easy returns should the need arise. You'll also be backed by the full might of one of the best customer service teams in the business, all pointing to the fact that this is one investment that is more than worth making.