Shop
Networking
Bulk Wire & Cable
Cables
Racks & Enclosures
Tools
Audio/Video/Home
HDMI
Mounts
Security
Adapters
Usb/Mobile/Tablet
Electrical
Technical Furniture
Shop Brands
FireFold
ICC
Intellinet Network Solutions
Jonard Tools
j5create
Kendall Howard
Netstrand
Paige Electric
Platinum Tools
Quest
Rhino Brackets
SimplyBrands
Structured Cable Products
Vanco
Vertical Cable
Wavenet
World Cord Sets
View All
About Us
Customer Service
Returns
Order Status
Shipping Policy
Customer Reviews
Contact Us
70497971000
Support@FireFold.com
Free Shipping on Orders > $99.99 - *Some Exclusions May Apply
Filter
Klein Tools Advanced Circuit Tracer Kit, ET450
The Klein Tools ET450 Advanced Circuit Tracer Kit is a professional tracer for energized and non-energized breakers, fuses, and wires. When the Transmitter is connected to a circuit, the Receiver’s sensitivity can easily be adjusted to detect the transmitted signal on breakers, fuses, and wire through drywall, cement block, and underground. Kit comes with transmitter, receiver, blade and ground prongs, alligator clips, 3-Foot and 20-Foot lead adapters, AC plug leads, instructions, all required batteries, and a hard carrying case with handle for convenient transportation and storage.
$299.99
5% offat checkout
Jonard Tools Mini Optical Power Meter, (-50 to +26dBm)
The Jonard Tools Mini Optical Power Meter is perfect for measuring both the absolute optical power and relative power loss in fiber optic cables. It also features a built-in visual fault locator and network cable tester and remote.
$219.95
Jonard Tools Fiber Power Meter & Optical Light Source Kit (-50 to +26 dBm, single-mode), FPL-5050
This tool kit provides everything you need to measure power and provide a stable light source for fiber optic cable testing.
$599.95
Klein Tools ET120 Combustible Gas Leak Detector
The ET120 is an easy-to-use tester that provides audible and visual alarms in the presence of methane, propane and other combustible gases at concentrations as low as 50 ppm, making it the perfect choice for HVAC professionals.
$129.97
Cleerline Visual Fault Locator for LC / 1.25mm
The Cleerline 1.25mm Visual Fault Locator includes a 650nm visual fault locator (VFL) for the verification of cables and connectors using visible light. Unlike most competitive products, the Cleerline VFL features a 1.25mm ferrule for direct compatibility with LC connectors -- no adapter required.
VFLs are essential for tracing fiber cable paths, checking optical continuity and verifying proper connector termination. They detect fiber breaks, fiber leaks, stress points and faulty connectors.
$45.36
Free Shipping
Jonard Tools Fiber Power Meter w/ Data Storage & SM/MM Optical Light Source Kit
This tool kit provides everything you need to measure power and provide a stable light source for fiber optic cable testing. This kit includes:
$1,049.95
Cleerline Visual Fault Locator with LC Adapter
The Cleerline Pocket Visual Fault Locator and Adapter includes a compact 650nm visual fault locator (VFL) for the verification of cables and connectors using visible light. A VFL adapter for compatibility with SC, ST, FC and LC connectors is included.
$166.33
Intellinet LED Ethernet Port Detector Tool
For RJ45 Keystone Jacks and Patch Panels with LEDs, Locates and Analyzes Port Connections, Yellow
Use this tool to effortlessly analyze RJ45 port connections in real time. You can check their trace status for an active connection (port LED lights red), a correctly cabled connection (port LED lights green), and a failure in cable termination (port LED is off). This works with select keystone jacks (#791267 & 791274) and patch panels (#721080) with built-in LEDs from Intellinet Network Solutions. For the best overall solution, we recommend using all these three components in conjunction.
Three distinctive modes give you flexibility at the touch of a button. Make the connected port LED light up, flash, or stay continuously illuminated, adapting to your specific information needs with ease.
NOTE: Requires one 9-volt battery (not included)
$26.99
Jonard Tools Fiber Optic Power Meter (-70 to +6 dBm) with FC/SC/LC Adapters
Primarily used in long haul applications, this fiber optic power meter is perfect for measuring both the absolute optical power and relative power loss in fiber optic cables.
$292.95
Jonard Tools Rugged Visual Fault Locator Kit, VFL-300
Designed to detect fiber breakpoints, fiber leaks, poor connections, and stress points, this rugged visual fault locator is perfect for field personnel detecting faults in fiber optic cables.
$229.95
Jonard Tools Fiber Inspection Microscope 400x Magnification, FIM-400
Jonard’s fiber inspection microscope has 400x magnification, a focus wheel, and features 2.5 mm (FC/SC/ST) and 1.25 mm (LC) adapters for use on most fiber connectors.
$239.95
Quest HDMI Cable Tester
Quest's HDMI Cable Tester is ideal for continuity testing of HDMI A and Mini C cables.
$49.89
Klein Tools HVNCVT-2 Broad Range Non-Contact Voltage Tester
Klein's Broad-Range High-Voltage Non-Contact Tester detects voltage up to 230kV AC in overhead conductors. The tester indicates the presence of voltage through multiple sensitivity levels with both audible and visual signals. Attach the tester directly to a hot stick or use the universal adapter to attach it to your shotgun.
$525.97
Cleerline Visual Fault Locator LC Adapter
The Cleerline 2.5mm to 1.25mm Visual Fault Locator Adapter is an essential tool for standard visual fault locators (VFLs). It adapts the standard 2.5mm ferrule used for SC, ST and FC connectors to a 1.25mm ferrule used by LC connectors.
Unlike most VFL adapters, the Cleerline VFL-ADP is a round barrel-style that is optimized for terminating and testing mechanical fiber connectors. Standard, click-over style adapters can obstruct mechanical connector locking tabs and buttons, whereas the Cleerline VFL-ADP provides access during the entire termination and test cycle.
$44.88
Cleerline Basic Fiber Testing Kit
The SSF-TKITE-200 from Cleerline Technology Group is a versatile and user-friendly fiber testing kit designed to support efficient optical link qualification and troubleshooting for both single-mode and multimode fiber networks. This compact and comprehensive solution includes an optical power meter and two optical light sources to provide all the essential tools for accurate testing, power loss calculation, and maintenance of installed fiber.
Enclosed in a rugged carrying case and equipped with various adapters and reference cables, the SSF-TKITE-200 is ideal for field technicians and network installers seeking a reliable and portable solution.
$1,056.00
Jonard Tools Underground Wire Tracer and Circuit Finder
Perfect for tracing cables up to 7 ft underground, locating breaks, or tracing a circuit back to the breaker; the WCT-700 is an all in one solution for any cable tracing task.
$548.95
Jonard Tools Digital Tone and Probe Set With Rechargeable Battery
The TETP-1000D is the fastest and easiest way to locate, test, and verify hard to find network cables in busy patch panels, wire bundles, and network closets. Featuring an easy-to-identify isolated digital signal perfect for testing on live networks, eliminating the need for downtime to diagnose any issues. With a long-lasting rechargeable LI-Ion battery for nonstop service.
$153.95
Jonard Tools Pocket Toner Replacement Speaker
This product is a replacement speaker for the PT-100 & PT-300 Pocket Continuity Tester and Toner.
$12.95
Jonard Tools Pocket Continuity Tester & Toner
Designed to identify cables in an MDU and detect troublesome short circuits, this pocket continuity tester and toner is perfect for testing cables up to 5,000 ft (1,500 m) on the go.
$18.95
Vertical Cable Optical Fiber Visual Fault Locator, Hand-Held, 1-mW, 2.5-mm Adapter
$46.94
Jonard Tools Multimode & Singlemode Fiber Optic Light Source with FC/LC/SC (PC/UPC) Adapters, FLS-55
Designed to provide 850/1300 nm or 1310/1550 nm wavelengths, this optical light source is the perfect tool for providing a stable light source for multimode or single mode fiber measurements.
$689.95
Jonard Tools HDMI Cable Tester, HDMI-100
Designed to test HDMI and Mini HDMI cables with ease, this HDMI Cable Tester is the perfect tool for evaluating HDMI cables that may have shorts, open circuits, or have wire pairs in the wrong order.
$59.95
SCP-EasyFiber™ Visual Fault Locator Adapter for LC connectors - 2.5mm to 1.25mm
The SCP EasyFiber Visual Fault Locator Adapter for LC Connectors adapts a visual fault locator's standard 2.5mm connection to a 1.25mm connection, making it compatible with LC-style connectors. The adapter is universally designed for 2.5mm connections and is an essential accessory for any fiber optic installer.
$33.81
PlatinumTools PoE++ Tester
Easy-to-use, pocket-sized tester for all varieties of PoE - up to 56 volts and 280 watts of power. Powered by the PoE circuit, the TPS200C requires no batteries, and can be used inline with an actual PoE device to measure current flow, or by itself in Powered Device (PD) Simulation mode to determine the maximum power available from the PoE power source.
$97.66
Klein Tools HVNCVT-1 Dual Range High Voltage Tester
The Dual-Range Non-Contact Tester checks for the presence of voltage in overhead conductors or finds faults in cables. The LOW range detects 50V AC to 1.5kV AC. The HIGH range detects 1.5kV AC to 132kV AC. The tester indicates the presence of voltage with both audible and visual signals.
$199.66
Platinum Tools Mini OTDR/Copper Tester (1310/1550nm)
The PT-OTDR-100 mini OTDR tester provides a simple to setup and easy to use solution for OTDR testing. Includes a 5.5 inch OLED touch screen for easy viewing of cable tests and can save and export your OTDR tests. This unit will perform OTDR tests, OPM, VFL and laser source functionality for fiber optic cable, and will also perform continuity testing and TDR for Category cable
MULTI-FUNCTIONAL TESTING
Multiple tests offered for both Fiber and Copper testing
COMPACT FORM FACTOR
Ruggedized form factor with a 4-6hr battery life, or charge on the go!
ACTIVE NETWORK TESTING
LLDP, PPPoE, IP Scan, & Ping testing all-in-one.
ACCESSIBLE PRICING
Priced to supply every truck and technician.
$931.77
SimplyTEST Fiber Optic Cable Visual Fault Finder with 2.5mm Universal Adapter for ST, SC & FC Connectors
The Visual Fault Finder is a visible laser light source used to check continuity, locate breaks, poor mechanical splices and damaged connectors in fiber optic cabling.
Used to verify continuity, test and find breaks in fiber links, locate pinched fiber strands in termination cabinets, or anywhere fiber optic cables are terminated and subject to mechanical damage.
The VFF5 is also an excellent aide to technicians terminating mechanical splices or pre-polished connectors where leaking light is an indicator of a poor fiber cleave or other misalignment.
$378.95
SimplyTEST 2 x 250um, 2 x 900um Fiber Holders
SimplyTEST™ – Fiber Holder Kit: Precision & Speed for Splicing – 5 x 250um, 2 x 900um fiber holders
Maximize your splicing efficiency and consistency with the Fiber Holder Kit. Designed for seamless integration with your cleavers and fusion splicers, these holders ensure perfect fiber placement every time.
$787.44
SimplyTEST FiberMASTER S60 Battery
SimplyTEST™ Replacement battery continuous splicing with FiberMASTER S60
Maximize your uptime and productivity with the ST-R301BATTS60 Li-ion battery for your FiberMASTER S60 fusion splicer. Engineered for extended use and ultimate flexibility, it ensures your work never stops.
$362.44
SimplyTEST FiberMASTER S40 Battery
Ensure uninterrupted performance for your FiberMASTER S40 fusion splicer with the R301-BATT-S40 Li-ion battery. Designed for long-lasting power and flexibility, it keeps your splicing operations running smoothly.
$306.19
SimplyTEST FiberMASTER Video Inspection Probe Tip - SC/APC
FiberMASTER Video Inspection Probe Tip – SC/APC
$249.94
SimplyTEST FiberMASTER Video Inspection Probe Tip - SC
FiberMASTER Video Inspection Probe Tip – SC
$206.19
SimplyTEST FiberMASTER Video Inspection Probe Tip - LC/APC
LC/APC port/bulkhead tip for FiberMASTER Video Inspection Probe
SimplyTEST FiberMASTER Video Inspection Probe Tip - LC
FiberMASTER Video Inspection Probe Tip – LC
SimplyTEST FiberMASTER Video Inspection Probe Tip - 2.5mm APC
2.5mm/APC universal port/bulkhead tip for FiberMASTER Video Inspection Probe
$312.44
SimplyTEST FiberMASTER Video Inspection Probe Tip - 2.5mm
FiberMASTER Video Inspection Probe Tip – 2.5mm
SimplyTEST FiberMASTER Video Inspection Probe Tip - 1.25mm APC
1.25mm/APC universal port/bulkhead tip for FiberMASTER Video Inspection Probe
SimplyTEST FiberMASTER Video Inspection Probe Tip - 1.25mm
FiberMASTER Video Inspection Probe Tip – 1.25mm
$218.69
SimplyTEST FiberMASTER Video Inspection Probe
FiberMASTER Video Inspection Probe
$1,518.69
SimplyTEST FiberMASTER Single-mode OTDR
FiberMASTER Single-mode OTDR (1310/1550) with SC connector, Inspection port, Power meter
Test, Troubleshoot and Certify cabling faster with the FiberMASTER OTDR.
The FiberMASTER OTDR is available in 4 options, Quad, multimode, singlemode and PON.
The OTDRs feature both high dynamic range and small dead zones providing the precision required for installation and troubleshooting alike. The software simplifies certification of cabling to meet TIA/ISO/IEC/IEEE requirements with simple pass/fail results. Additionally custom test parameters are easily set to accommodate any application.
OTDRs can be complicated to configure and achieve accurate results. FiberMASTER automates testing and steps you through the process as shown below.
For FTTx/FTTH applications the PON OTDR identifies split ratios for easy testing and troubleshooting of inactive and active networks. The 1625nm wavelength allows in-service testing of networks without interrupting existing subscribers.
Why do I need a FiberMASTER?
It depends how important speed and accuracy are to you.
FiberMASTER – size, simplicity and value without compromise, made in the USA, tested in Germany.
The new FiberMASTER series of fiber optic testers will make it easier and faster to verify, troubleshoot and certify fiber optic cabling.The OTDR, PON OTDR, Power Meter and Light Source, and Inspection Probe will enable cable installers to get the dependable test results needed, while saving thousands of dollars.As one of the smallest OTDRs in the world you will find them easier to carry and operate while the rubberized housing will protect your investment. The simplified setup options makes them easy to use, saving you time on training and reducing the likelihood of errors.
Our New York Research and Development center of excellence has over 30 years experience designing OTDRs providing you with the most advanced, compact optical test systems available.
$4,744.94
SimplyTEST FiberMASTER Quad OTDR
FiberMASTER Quad OTDR (850/1300/1310/1550) with SC connectors, Inspection port, Power meter
$6,812.44
SimplyTEST FiberMASTER Power Meter and Light Source
FiberMASTER Multimode/single-mode power meter and quad light source kit, with Inspection port, VFL
$4,557.44
SimplyTEST FiberMASTER MM/SM Power Meter
FiberMASTER Multimode/single-mode power meter with interchangable SC/SC/FC connectors, Inspection port, VFL
$1,556.19
SimplyTEST FiberMASTER PON OTDR
FiberMASTER PON OTDR (1310/1550/1625) with SC-APC connectors, Inspection port, Power meter
$7,119.94
SimplyTEST FiberMASTER Multimode OTDR
FiberMASTER Multimode OTDR (850/1300) with SC connector, Inspection port, Power meter
$3,744.94
Cleerline Visual Fault Locator for SC / 2.5mm
The Cleerline 2.5mm Visual Fault Locator includes a 650nm visual fault locator (VFL) for the verification of cables and connectors using visible light. The VFL features a 2.5mm ferrule for direct compatibility with SC, ST and FC connectors. An optional adapter can be used to adapt to 1.25mm LC connectors.
$50.40
Cleerline Professional Fiber Testing Kit With Data
The SSF-TKITP-500 Professional Fiber Testing Kit is a high-quality solution for fiber certification in accordance with TIA-568-C standards. This kit includes an Optical Power Meter and Light Source to test both multimode and single-mode installed fibers. Four wavelengths, with a range of 70 decibels (dB). The Light Source and Power Meter measure link loss, allowing calculation of the link loss budget.
The test kit is designed for efficiency and ease of operation. Features include storage of up to 1000 test records. Data can be exported to CSV via downloadable software (PC only).
The test kit provides SC testing by default. LC testing is available with use of the included LC adapter and reference cables in the full reference cable pack. Adapters for FC-ST terminated cables are also included. All kit items are contained in a sturdy case for easy access in the field.
The SSF-TKITP-500 provides detailed fiber certification in accordance with TIA-568-C standards.
$1,978.68
Jonard Tools Wireless Fiber Inspection Microscope, WFM-100
This portable Wi-Fi end-face probe provides clear high-resolution images of fiber optic connector ferrules in real time on a smart mobile device or tablet. It also features a One Press automatic analyze function, which automatically generates and records a Pass/Fail report.
$1,999.95
×
×