1U

Quest 19 Inch Horizontal Power Strip with 10 Outlet

Power strips are needed in any setup, it's just a fact of life. This particular necessity will work great for a networking setup, telecommunications installation, or as part of a terminal. It can be configured to a 19" rack and takes up only 1U (unit). There are 10 outlets with 2 in the front and 8 in the back for accessibility and a 15 Amp circuit breaker as a precaution to overload or short circuiting.

19" racks are essentially the standard size that most racks come in, and since this rack is 19" itself, there is no surprise that it is configurable to a rack. It takes up only 1U on a rack so your monster server or patch panel can take up 5. Take your rack with you by having a power strip available when you need it.

Certain cords aren't going to be removed very often; we're talking about power cords to the servers, monitors, patch panels, etc. Not only don't you want to remove them, but you likely don't want to see them, and so that is why there are outlets in the back; there are also outlets in the front. These front outlets allow you to quickly plug in a device (such as a diagnostic tool) to be used immediately where it is needed and then put it away. While simply having a power strip on a rack will allow you to do this, if all of the outlets were on the back it would be inconsiderate on the part of the designers to make you go back there and sift through cables and such.

These devices are made to take on some excess voltage that may overload, short circuit, or otherwise damage the system via an overcurrent. The nice part of a circuit breaker is that once it has done its job you can simply reset the switch and it will serve you again.

Vertical Cable 1U PDU with 8 Outlets

Vertical Cable 047-wps-2000 8 Way PDU with Main Switch and Breaker - 1U Power Distribution Unit

Quest HPS-E12P 12 Outlet Power Strip

If power is what you're looking for then you have arrived at the right place. This horizontal rack mount power strip is sure to give your installation a surplus of power that is supplied by 12 outlets. It is paired up with an illuminated rocker power switch and 15 amp circuit breaker and is UL certified. The power strip is a cold rolled steel 14 AWG that is painted in a black micro-finish.

Middle Atlantic Rackmount Power Strip PD-815R-PL

The PD-815R-PL from Middle Atlantic provides 8 rear outlets and a 9ft power cord, with plenty of power for all your rackmounted components. All outlets are designated for NEMA 5-15R plugs and have a maximum derated load of 12 Amps.

The PD-815R-PL carries a single-stage surge and spike protector and EMI filtering, giving you an uninterrupted signal and added safety against surge events. It also has an instantaneous response time (1 nanosecond) to surge events.

Middle Atlantic Rackmount Power Strip PD-915R 

The PD-915R from Middle Atlantic provides 8 rear outlets with one front convenience outlet and a 9ft power cord, with plenty of power for all your rackmounted components. All outlets are designated for NEMA 5-15R plugs and have a maximum derated load of 12 Amps.

The PD-915R carries a single-stage surge and spike protector and EMI filtering, giving you an uninterrupted signal and added safety against surge events. It also has an instantaneous response time (1 nanosecond) to surge events.

Tripp-Lite 1U Rack-Mount Power Strip RS-1215-RA

1U Rack-Mount Power Strip, 120V, 15A, 5-15P, 12 Outlets (Right-Angled Widely Spaced), 15-ft. Cord

• 12 NEMA 5-15R outlets are spaced apart to accommodate bulky transformers
• Lighted on/off switch with plastic cover is protected against accidental turn-off
• 15 ft. cord with NEMA 5-15P plug is long enough to reach distant AC outlet
• Versatile installation on wall, under counter or in 1U of rack space

Tripp-Lite Rackmount Server Power Strip RS-0615-R 1U

Tripp Lite's RS-0615-R power strip offers 15 amp capacity AC power distribution in a versatile multi-mount cabinet. Detachable mounting flanges are configurable for rackmount, wallmount and under-counter installation. Uses only 1 rack space (1U) when installed in any 19 inch rack meeting EIA standards. Unfiltered electrical pass-through makes RS-0615-R ideal for distributing alternate waveform UPS or generator power in rack enclosures, network closets and more. Includes 6 rear-facing NEMA5-15R outlets, 15 ft AC power cord and lighted switch with latching safety cover prevents risk of accidental turn-off.

PLUG/OUTLETS: Input: NEMA 5-15P/Output: 6 Rear-facing NEMA5-15R

ELECTRICAL: 120V AC, 50/60Hz, 15A (Requires standard NEMA 5-15R wall receptacle)

FORMAT: Supports 19 in. rackmount (uses 1 rack space/1U), wallmount, under-counter and more

Tripp-Lite Single-Phase Basic PDU1.8 kW PDU1215

The PDU1215 1.8kW Single-Phase 120V Basic PDU is the perfect no-frills unit for networking, telecom, security, audio/video and sound reinforcement applications. Perfectly suited for high-density IT environments, the PDU1215 features a single breakered load bank with 13 NEMA 5-15R outlets—12 in the rear and one in front. The NEMA 5-15P input plug with long 15-ft. (4.57 m) cord connects to your facility's compatible AC power source, generator or protected UPS to distribute power to connected equipment.

The switchless design prevents an accidental shutdown, which could lead to costly downtime. A 15A circuit breaker protects connected equipment from dangerous overloads. The reversible all-metal housing mounts in 1U of space in EIA-standard 19-inch racks, as well as on a wall or workbench or under a counter. With a compatible rack and Tripp Lite's PDUSIDEBRKT accessory (sold separately), you can adapt the PDU1215 for vertical 0U rack-mounting.

1.4kW Single-Phase Metered PDU, 120V Outlets (13 5-15R), 5-15P, 100-127V input, 6ft Cord, 1U Rack-Mount

•  Local metered single phase 12A 100-127V PDU
• 1U horizontal rackmount, Digital current meter
• NEMA 5-15P input with 6ft / 1.8m line cord
• 13 NEMA 5-15R outlets (1 front / 12 rear)
• Reversible housing, 4.5 in / 11.4cm depth

Tripp-Lite 14-Outlet Server Surge Protector DRS-1215

DRS-1215 offers surge and noise suppression in a versatile all-metal multi-mount cabinet. Detachable mounting flanges are configurable for rack-mount, wall-mount and under-counter installation. Uses only 1U when installed in any 19-inch EIA-standard rack. Includes 14 outlets (6 front/8 rear), 15-foot (4.6-meter) cord and guarded power switch to reduce the risk of accidental shutoff. Diagnostic LED indicates surge protection status.

• 14 outlets / 15-ft. (4.57 m) cord
  
• 3000 joule rating
  
• Adjustable rackmount hardware

Tripp-Lite RS-1215-20T 1U Rack-Mount Power Strip

Tripp Lite's RS-1215-20T Power Strip offers 20A capacity AC power distribution in a versatile multi-mount cabinet. Detachable mounting flanges are configurable for rackmount, wallmount and under-counter installation. Uses only 1 rack space (1U) when installed in any 19-in. rack meeting EIA standards. Unfiltered electrical pass-through makes RS-1215-20T ideal for distributing alternate waveform UPS or generator power in rack enclosures, network closets and more. Includes 12 NEMA5-15/20R outlets (6 front/6 rear), 15-ft. AC power cord with locking NEMA L5-20P input plug and lighted switch with cover that prevents risk of accidental turn-off.

1U Rack-Mount Power Strip, 120V, 15A, 5-15P, 12 Outlets (6 Front-Facing, 6-Rear-Facing), 15-ft. Cord

The RS-1215 Power Strip offers 15A capacity AC power distribution in a versatile multi-mount cabinet. Detachable mounting flanges are configurable for rack-mount, wall-mount and under-counter installation. Uses only 1U when installed in any 19-inch rack meeting EIA standards. Unfiltered electrical pass-through makes RS-1215 ideal for distributing alternate waveform UPS or generator power in rack enclosures, network closets and more. Includes 12 NEMA 5-15R outlets (six front/six rear), 15-foot (4.6-meter) cord and lighted switch with cover prevents risk of accidental turn-off.

• Designed for standard 19-inch racks (1U high)
• 12 outlets (6 front / 6 rear)
• 15-amp circuit breaker
• 15-ft. (4.57 m) cord

Middle Atlantic Rackmount Power PD-915RC-20

The PD-915RC-20 from Middle Atlantic provides 8 rear outlets with one front convenience outlet and a 20ft power cord, giving you the opportunity to run a longer distance to the wall. All outlets are designated for NEMA 5-15R plugs and have a maximum derated load of 12 Amps.

The PD-915RC-20 carries a single-stage surge and spike protector and EMI filtering, giving you an uninterrupted signal and added safety against surge events. It also has an instantaneous response time (1 nanosecond) to surge events.

Tripp Lite Metered PDU / Power Distribution Units offer real-time local reporting of load level in amps via built-in digital meter. Enables visual current monitoring of PDU output current to prevent circuit overloads as additional equipment is added. Offers reliable rackmount multi-outlet power distribution from any protected UPS, generator or mains input power source. High quality design includes rugged all-metal housing and secure rackmount installation with included mounting accessories.

1U Rack-Mount Power Strip, 120V, 20A, 5-20P, 12 Outlets (6 Front-Facing, 6-Rear-Facing) 15 ft. (4.57 m) Cord

The RS-1215-20 Power Strip offers 20A capacity AC power distribution in a versatile multi-mount cabinet. Detachable mounting flanges are configurable for rack-mount, wall-mount and under-counter installation. Uses only 1U when installed in any 19-inch rack, meeting EIA standards. Unfiltered electrical pass-through makes RS-1215-20 ideal for distributing alternate waveform UPS or generator power in rack enclosures, network closets and more. Includes 12 NEMA 5-20R outlets (six front/six rear), 15-foot (4.6-meter) cord and lighted switch with cover prevents risk of accidental turn-off.

• Designed for standard 19-inch racks (1U high)
• 12 outlets (6 front / 6 rear)
• 15-ft. (4.57 m) cord
• 20-amp circuit breaker

500VA 300W 120V Line-Interactive UPS - 6 NEMA 5-15R Outlets, USB, DB9, Network Card Option, 1U Rack/Tower

Tripp Lite's SMART500RT1U intelligent, line-interactive rack/tower uninterruptible power supply prevents data loss, downtime and equipment damage due to power outages, voltage fluctuations and transient surges. Requires only one rack space (1U) in a 2 or 4 post rack, with included accessories for upright tower placement. Large internal batteries offer 14.6 minutes half load runtime and 3.2 minutes at full load. Maintains regulated 120V nominal output without using battery power during brownouts as low as 90V. 500VA/300 watt power handling capability is compatible with networking, telecom and other sensitive electronic applications. Includes 6 UPS supported outlets with a single outlet load bank that can be individually controlled via software interface to reboot select equipment on demand or shed less significant loads to extend battery runtime for more critical equipment. Includes 1 surge-only outlet for peripherals not requiring battery backup.

Supports simultaneous remote monitoring of UPS and site power conditions via built-in USB and DB9 monitoring ports. PowerAlert UPS monitoring and unattended shutdown software is available for free download. Emergency Power Off (EPO) interface offers option for instantaneous power-off of UPS and connected equipment in the case of fire or emergency situation. Multi-function audible alarms and set of 5 front panel LEDs offer at-a-glance notification of UPS and line power status. Network-grade AC surge suppression protects equipment from damage and performance problems resulting from transient surges and line noise. Attractive all-black color scheme.

2kW Single-Phase Local Metered PDU + ISOBAR Surge Suppression, 3840 Joules, 100-127V Outlets

• Local Metered single phase 16A 120V PDU with ISOBAR Surge Suppression
• 1U Horizontal rackmount, Digital current meter
• 3840 Joule suppression rating, Diagnostic LEDs
• NEMA L5-20P input with 5-20P adapter; 15-ft. / 4.57 m line cord
• 12 NEMA 5-20R outlets (rear), 2 5-15R outlets (front)
• Reversible housing; 4.5in /11.4cm depth

Middle Atlantic Power Strip PDCOOL-1115R

The PowerCool™ Series from Middle Atlantic offers a space saving integrated power and cooling solution all in one rack unit sized mount. With a smart fan, the speed is proportional to the temperature of the enclosure to extend fan life and eliminate dust and debris allowing less maintenance.

With a 50 CFM fan operating at a quite 29dB, the PDCOOL-1115R exhausts heat from hot equipment only when needed, making this model highly energy efficient.

The PDLT Series from Middle Atlantic features an onboard dimmable LED bar perfect for viewing components mounted below. As well as providing light, the PDLT-815RV-RN gives you 8 2 stage surge protected outlets in the rear for plugging up all your equipment neatly and safely. With a "clean ground" surge suppressor design, you can rest assured that no noise contamination will pass through to the ground.

As well as the front lighting, the rear of the PDLT-815RV-RN features 2 USB ports, perfect for additional LED gooseneck lights to be plugged in.

The Great Lakes 7219-20AR Rackmount Power Strip features 6 receptacles and is designed for 19 inch rack mounting.

Case and Cabinet

Great Lakes Case & Cabinet is a leading manufacturer of racks, wall mount and free-standing enclosures, technical furniture, and command center systems. Their influence stretches through the data, communication, broadcast, sound and security industries. They have been industry leaders for more than 25 years, so you know that you are getting quality products when you make a purchase. We are proud here at FireFold to bring you this great company as an option for your home or business networking needs.

Your Powers Combined

Once you get your rack setup and configured, you sometimes just want power that is directly on it. That is no problem! The Great Lakes 7219 is a six position power strip that is designed for 20 amps. It is a 125V strip with a built-in circuit breaker for 19″ server rack mounting. The 15' power cable gives you plenty of distance to work with just in case your power receptacle is not right next to your rack.

This sturdy, UL listed product comes with a one year manufacturer warranty. Although you won’t get some sort of miracle out of this product, you will feel like you’ve been blessed with the simplicity it provides. You could easily buy several of these, properly spaced, and perhaps make an entire rack of them if you really wanted. Have a power party!

Orion's Power Systems Basic PDU 15A 120V 5-15R input plug with (10) 5-15R receptacles PDU can be mounted 1U horitzontal. Constructed of steel case with covered on/off switch UL listed Dimensions: 1.7"W x 3.5"D x 19" H Weight: 3.6 lbs.

Orion's Power Systems Basic PDU 20A 120V L5-20R input plug with (12) 5-15R receptacles PDU can be mounted 1U horitzontal. Constructed of steel case with covered on/off switch UL listed Includes adapter to convert L5-20P to straight blade 5-20P input plug Dimensions: 1.7"W x 3.5"D x 19" H Weight: 3.6 lbs.

FORGE L-Brackets for Universal Shelves

Used to prevent shelf-mounted equipment from being pushed back into the rack as front buttons are pressed. Sold in plastic bottle containing 20 pcs.

Techlogix Networx 12 Port Rack-Mount Power Hub

Audio-visual equipment typically ships with one of two different external power supply types: either a “line lump” or a “wall wart”. Both conjure negative mental imagery, and the reality isn’t much different—AV racks are often filled with ugly power supplies squeezed together in bumpy clusters generating heat and gobbling up precious space.

Line lumps and wall warts are the banes of integrators tasked with wiring a clean rack.

Enter the TechLogix TL-RKPS-01. This compact hub replaces up to twelve 5V, 12V, and/or 24V power supplies with a single, easily mounted rack chassis. Each channel is selectable, thereby accommodating various makes and models of equipment—everything from extenders to splitters to switchers. Plus, the remote control allows individual channels to be cycled from any remote location, and 100ms startup sequencing ensures smooth power reboots.

The TL-RKPS-01 is the ultimate tool for clean integrations and hassle-free maintenance.

1.9kW Single-Phase ATS / Switched PDU, 120V (16 5-15/20R), 2 L5-20P / 5-20P Inputs, 2 12ft Cords, 1U Rack-Mount, TAA

This Switched Automatic Transfer Switch / ATS PDU provides a redundant power option for single-corded network devices. Dual input cords support separate connection to primary and secondary power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. The Java-free LX Platform HTML5-based network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP. Switched PDU features include individually controllable output receptacles and built-in network interface. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. The SmartOnline® series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LEDs display primary or secondary power availability.

• 1.9kW 120V ATS / Switched PDU, Single phase 20A 120V
• Enables redundant A/B power option for single-corded network devices
• Separate primary & secondary inputs connect to any two compatible power sources
• 1U horizontal rackmount; 2 L5-20P / 5-20P inputs; 16 5-15/20R outlets
• Pre-installed WEBCARDLX with latest version of PADM20 for IP-based Auto Probe feature

1.4kW Single-Phase Metered PDU, 120V Outlets (13 5-15R), 5-15P, 100-127V Input, 15ft Cord, 1U Rack-Mount

• Local metered single phase 12A 120V PDU
• 1U horizontal rackmount, Digital current meter
• NEMA 5-15P input with 15-ft. (4.57 m) line cord
• 13 NEMA 5-15R outlets (1 front / 12 rear)
• Reversible housing, 4.5 in. / 11.4 cm depth

Isobar 12-Outlet Surge Protector, 15 ft. Cord, 3840 Joules, Diagnostic LEDs, 1U Rack-Mount

Rack-mount protection for A/V components, network hardware, retail displays, appliances, power tools and other expensive electronics against dangerous surges, spikes and line noise in home, office and industrial environments.

• 12 NEMA 5-15R outlets in exclusive isolated filter banks
• Network-grade 3840-joule surge protection rating
• Durable metal housing designed for tough environments
• 15A resettable circuit breaker prevents dangerous overloads
• 15-ft. (4.57 m) AC power cord with NEMA 5-15P plug

1.92kW Single-Phase Metered PDU, 120V (12 5-15/20R), L5-20P / 5-20P, 110-127V Input, 15ft Cord, 1U Rack-Mount

Tripp Lite's PDUMH20 provides network-grade power distribution from a UPS, generator or utility source for servers, switches and other rack-mount equipment. The PDU's durable metal housing and industrial-strength components are built for years of reliable service in high-availability environments, like network closets, server rooms and data centers.

Middle Atlantic PDS-1620R-NS - 16 Outlet 20A Multi-Mount Power, 3-Step Sequencing

Middle Atlantic 16 Outlet 15A Multi-Mount Power, 3-Step Sequencing

Designed to optimize space and efficiency in power management, this rackmount power distribution system provides up to 16 total outlets within a shallow depth

The PowerCool™ Series from Middle Atlantic offers a space saving integrated power and cooling solution all in one rack unit sized mount. With a smart fan, the speed is proportional to the temperature of the enclosure to extend fan life and eliminate dust and debris allowing less maintenance.

With a 50 CFM fan operating at a quite 29dB, the PDCOOL-1020RK exhausts heat from hot equipment only when needed, making this model highly energy efficient.

The PowerCool™ Series from Middle Atlantic offers a space saving integrated power and cooling solution all in one rack unit sized mount. With a smart fan, the speed is proportional to the temperature of the enclosure to extend fan life and eliminate dust and debris allowing less maintenance.

With a 50 CFM fan operating at a quite 29dB, the PDCOOL-1120R exhausts heat from hot equipment only when needed, making this model highly energy efficient.

The PDLT Series from Middle Atlantic features an onboard dimmable LED bar perfect for viewing components mounted below. As well as providing light, the PDLT-815RVA gives you 8 2 stage surge protected outlets in the rear for plugging up all your equipment neatly and safely. With a "clean ground" surge suppressor design, you can rest assured that no noise contamination will pass through to the ground.

As well as the front lighting, the rear of the PDLT-815RVA features 2 USB ports, perfect for additional LED gooseneck lights to be plugged in.

The PD-915R-PL from Middle Atlantic provides 8 rear outlets and one front convenience outlet with a 9ft power cord, giving you plenty of power for all your rackmounted components. All outlets are designated for NEMA 5-15R plugs and have a maximum derated load of 12 Amps.

The PD-915R-PL carries a single-stage surge and spike protector and EMI filtering, giving you an uninterrupted signal and added safety against surge events. It also has an instantaneous response time (1 nanosecond) to surge events.

The Great Lakes 7219-20ARTLP Rackmount Power Strip features 16 receptacles and is designed for 19 inch rack mounting.

Case and Cabinet

Great Lakes Case & Cabinet is a leading manufacturer of racks, wall mount and free-standing enclosures, technical furniture, and command center systems. Their influence stretches through the data, communication, broadcast, sound and security industries. They have been industry leaders for more than 25 years, so you know that you are getting quality products when you make a purchase. We are proud here at FireFold to bring you this great company as an option for your home or business networking needs.

Your Powers Combined

Once you get your rack set up and configured, you sometimes just want power that is directly on it. That is no problem! The Great Lakes 7219-SR14 is a 14 Position Horizontal Power Strip with Circuit Breaker and Surge Suppressor that is designed for 20 amps. It is a 125V strip with a built-in circuit breaker for 19″ server rack mounting. The 15' power cable gives you plenty of distance to work with in case your power receptacle is not nearby. It has six front plugs in the front and eight in the back.

This sturdy, UL listed product comes with a one year manufacturer warranty. Although you won’t get some sort of miracle out of this product, you will feel like you’ve been blessed with the simplicity it provides. You could easily buy several of these, properly spaced, and perhaps make an entire rack of them if you really wanted. Have a power party!

1U Rack Mount Power Distribution Unit with 12 Outlets

Add extra power sources to any standard 19 inch rack or cabinet with this 1U rack mount power distribution unit. This power strip installs easily to provide 2 front panel AC outlets and 10 back panel AC outlets. A lighted on/off switch and 3 status indicator lights.

19 Inch 1U Rackmount PDU with 8 Outlets - Overload Protection, 15A

Rackmounts are an essential part to any business system, as it provides an organized setup for all of your devices. FireFold provides quality controlled rackmount power strips that effectively makes your business run smoother with less down time. This power strip provides a 15 amp power output and features outlets with overload protection.

Manufactured with precision engineering, these rackmount power strips will make a significant difference to your business.

• 15A Max
• 14AWG power cord
• On / Off switch

Note: Mounting screws not included

The PDU1230 4.8/5.8kW Single-Phase 200/208/240V Basic PDU is the perfect no-frills unit for networking, telecom, security, audio/video and sound reinforcement applications. Perfectly suited for high-density IT environments, the PDU1230 features 20 total outlets—12 rear C13, four front C13 and four front C19. The NEMA L6-30P input plug with long 15-foot (4.5 m) cord connects to your facility’s compatible AC power source, generator or protected UPS to distribute power to connected equipment.

The switchless design prevents an accidental shutdown, which could lead to costly downtime. Built-in circuit breakers protect connected equipment from dangerous overloads. The reversible all-metal housing mounts in 1U of space in EIA-standard 19-inch racks, as well as on a wall or workbench or under a counter. With a compatible rack and Tripp Lite’s PDUSIDEBRKT accessory (sold separately), you can adapt the PDU1230 for vertical 0U rack-mounting.