OS2

Adapter Plate, 12 Fiber, Duplex, SC/APC, 9 µm OS2, Green

Cleerline™ 12 port SC/APC single-mode adapter plate has a simple push-in design. These adapter plates fit any LGX compatible Rack Mount and Wall Mount enclosures, making it easy to add additional ports as needed.

Adapter Plate, 12 Fiber, Duplex, SC/UPC, 9 µm OS2, Blue

Cleerline™ 12 port SC single-mode adapter plate has a simple push-in design. These adapter plates fit any LGX compatible Rack Mount and Wall Mount enclosures, making it easy to add additional ports as needed.

Adapter Plate, 06 Fiber, Simplex, SC/APC, 9 µm OS2, Green

Cleerline™ 6 port SC/APC single-mode adapter plate has a simple push-in design. These adapter plates fit any LGX compatible Rack Mount and Wall Mount enclosures, making it easy to add additional ports as needed.

Adapter Plate, 24 Fiber, Quad, LC/APC, 9 µm OS2, Green

Cleerline™ 24 port LC/APC single-mode adapter plate has a simple push-in design. These adapter plates fit any LGX compatible Rack Mount and Wall Mount enclosures, making it easy to add additional ports as needed.

Adapter Plate, 24 Fiber, Quad, LC/UPC, 9 µm OS2, Blue

Cleerline™ 24 port LC single-mode adapter plate has a simple push-in design. These adapter plates fit any LGX compatible Rack Mount and Wall Mount enclosures, making it easy to add additional ports as needed.

Adapter Plate, 12 Fiber, Duplex, LC/APC, 9 µm OS2, Green

Cleerline™ 12 port LC/APC single-mode adapter plate has a simple push-in design. These adapter plates fit any LGX compatible Rack Mount and Wall Mount enclosures, making it easy to add additional ports as needed.

Fiber Optic Keystone Insert, Simplex SC to SC, Single-mode

Cleerline™ Fiber Optic Keystone Insert provides easy cable connections. Simplex SC to SC single-mode adapter provides a simple solution for fiber to the plate.

Fiber Optic Keystone Insert, Simplex SC to SC, Single-mode

Cleerline™ Fiber Optic Keystone Insert provides easy cable connections. Simplex SC to SC single-mode adapter provides a simple solution for fiber to the plate.

Singlemode Duplex Patch Cable, 3.0 mm Riser

Cleerline XD fiber optic patch cords deliver extreme performance and reliability for all system connections. XD series patch cords incorporate Cleerline’s BendSafe® technology.

Designed for reliability in all applications, XD series patch cords provide flexible interconnection to active equipment, passive optical devices, and cross-connects. XD series patch cords exhibit lower optical power loss under bend than standard cables and are compatible with all conventional cabling.

Available in duplex configuration OM3, OM4 (multimode), and OS2 (single-mode) type fibers. LC style are clipped.

Vertical Cable Optical Fiber Plenum Cable, Tight Buffer, Singemode, OS2, Plenum, Indoor/Outdoor

West Penn Interlocked Armor Distribution Cable - 12 Fiber OS2 OFCP, By the Foot

OS2 9/125 Singlemode BRIGHT Traceable Duplex Fiber Cable, LC/LC

One of the world’s first self-powered traceable fiber jumpers. Each end contains an LED and a button to activate, once activated your Bright jumper will light up at each connector end for easy traceability. Every Bright fiber jumper utilizes a switchable Uniboot connector and Corning ClearCurve glass.

Smart and cost-effective solution for long distance transmission

Superior solution for long distance transmission in data centers, telecommunications, Fiber to the Home, video transmission, Fiber Optic Sensing, etc. Includes flammability rating OFNR (Riser) jacket with heat shrink to prevent the zipcord from separating from the connector.

Bend Insensitive Fiber

Constructed with the highest quality Corning Clearcurve Bend Insensitive Fiber (BIF) glass. This premium construction allows us to deliver the best macro-bending performance in the industry – up to 10x less signal loss in tight bend scenarios.

Designed for High-Density Environments

Fiber patch cable can be installed in loops less than an 7.5 mm radius producing less than 0.2 dB bending loss at 850nm to meet the demands for today’s hyper-scale data centers.

Tested to Meet Industry Standards

Each cable is tested to meet industry standards. Test results are included in a sticker in the bag for every cable for easy documentation.

Approvals: Telcordia GR-326-CORE, TIA/EIA-568-C.3, IEEE802.3z, RoHS Compliant. Manufacturing Facility: ISO-9001 and TUV Certified.

• Insertion Loss: ≤0.25dB
• Return Loss: ≥55dB

Barcodes for Asset Management Tracking

Document your new fiber patch cables in your infrastructure with a simple scan eliminating paper and manual processes. Labels are printed on both sides of the cable including the serial number, product number and barcode for asset management tracking.

Audit Proof Your Network

No data center is static or simple. With large volumes of equipment moving in and out for maintenance or reconfiguration our barcodes allow you to track, manage and monitor your cable throughout their life cycle with complete ease and efficiency.

SCP Duplex LC(F)/SC(M) Single-Mode In-Line Style Coupler

SCP Duplex LC(F)/SC(M) Single-Mode In-Line Style Coupler - OS2 (Blue), UPC Polish Type

SCP Simplex SC(F)/LC(M) Single-Mode Panel Mount Coupler

SCP Simplex SC(F)/LC(M) Single-Mode Panel Mount Coupler 13mm Female/Male - OS2 (Blue), UPC Polish Type

SCP Simplex SC/SC Single-Mode Panel Mount Coupler

SCP Simplex SC/SC Single-Mode Panel Mount Coupler 13mm Female/Female - OS2 (Blue), UPC Polish Type

SCP Simplex LC/SC Single-Mode Panel Mount Coupler

SCP Simplex LC/SC Single-Mode Panel Mount Coupler 13mm Female/Female - OS2 (Blue), UPC Polish Type

SCP Duplex LC/LC Single-Mode Panel Mount Coupler

Panel Mount Couplers / 13mm Panel Mount Couplers - Single Mode

SCP 6 Simplex SC/APC Single-Mode Fiber LGX Adapter Plate

The 6 single mode simplex SC/APC enclosure panel populates open panel slots in compatible wall-mount enclosures and rack trays. The panel is compatible with LGX-118 panel slots and features push-pin style mounting tabs for quick installation.

LC/UPC SM Mechanical Connector, blue - 1ea/Bag

Simply – LC/UPC Premium single-mode mechanical reusable connector with high clarity matching gel for 250/900µm fiber, blue – 1ea/Bag

SCP Simplex SC/APC Single-Mode Fiber Keystone Jack

SCP Snap-In Fiber Keystone Jack Couplers (female to female) are compact designed allowing 24 fiber keystone jack couplers to comfortably fit side by side in a 1RU 24 port patch panel. Compatible with most Keystone wall plates, patch panels, surface mount and media outlet boxes. UL listed.

Single Mode SCP-EasyFiber™ with Corning® SMF-28® Ultra OS2 9/125

EF-OS2R-DUP-YL - Duplex Zip OS2 Riser Bend Insensitive SCP-EasyFiber™ w/Corning® SMF-28® Ultra - Duplex Zip Single Mode OS2 9/125, 2.0mm, UL Riser OFNR, Yellow Jacket, 2000ft/610m Reel In Box

SCP-EasyFiber™ Single Mode OS2 Cables - OS2 9/125, UL Riser OFNR

SCP-EasyFiber™ Single Mode with Corning® SMF-28® Ultra delivers the best installation and macrobending performance for Single Mode fiber. SCP-EasyFiber™ Single Mode is a full-spectrum single mode fiber that experiences virtually no signal loss in tight bends and challenging cable routes. Installs "Like Copper"; Saves on Installation Costs. Compatible with conventional industry equipment & standards. Indoor/Outdoor - Plenum OFNP; Riser OFNR; and LSZH EN50575 EuroClass Dca-s1,d1,a1 (EU only).

Part No. Explanation: EF= SCP-EasyFiber™ with special Corning Glass Fibers (Higher Performing and Bend Insensitive); DUP= Duplex (2 Strand Siamese Side x Side); SIMPLEX= 1 Fiber Strand; DIST= Tight Buffered Distribution Cable (Fiber strands inside Overall Jacket); Drop= Rugged Simplex Indoor/Outdoor; OS2= Single Mode 9/125; P= Plenum OFNP; OFNP= Optical Fiber Non-Conductive Plenum; LSZH= Low Smoke Zero

ALTOS® Lite™ Loose Tube, Gel-Free, SingleJacket, Single-Armored Cable

6 F, Single-mode (OS2)

Corning Cable Systems ALTOS® Lite™Gel-Free, SingleJacket, Single-Armored Cables are designed for campus backbones in direct-buried installations. The loose tube design provides stable and highly reliable transmission parameters for a variety of voice, data, video and imaging applications. These cables also provide high-fiber density within a given cable diameter while allowing flexibility to suit many system configurations. The single armored construction provides additional crush and rodent protection with a high-strength ripcord under the armor for easy stripping. Gel-free means the cables are fully waterblocked using craft-friendly, water -swellable materials which make cable access simple and require no clean up. The flexible, craft-friendly buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation and environmental rigors while allowing easy midspan access. These cables have a medium density polyethylene jacket that is rugged, durable and easy to strip.

ALTOS Lite Loose Tube, Gel-Free, Single-Jacket, Single-Armored Cables w/ FastAccess Technology12 F, SMF-28 Ultra fiber, Single-mode (OS2)

Applications: Aerial, Direct Buried, Duct

Corning ALTOS Lite gel-free, single-jacket, single-armored cables with FastAccess technology are designed for direct-buried installations. The innovative FastAccess technology feature combined with the gel-free loose tube design simplifies removal of t he cable jacket and accessing the buffer tubes. The gel-free design means the cables are fully waterblocked using craft-friendly water-swellable materials which makes cable access simple and require no clean up. The loose tube design uses Corning's SMF- 28 Ultra fiber to provide reliable transmission parameters for a variety of voice, data, video and imaging applications. The flexible buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation a nd environmental rigors while allowing easy midspan access. The single-armored construction provides additional crush and rodent protection. These cables have a medium-density polyethylene jacket that is rugged, durable and easy to strip.

ALTOS® Loose Tube, Gel-Free, All-Dielectric Cable

Common Installations: Outdoor lashed aerial and duct; indoor when installed according to National Electrical Code (NEC) Article 770; Design and Test Criteria: ANSI/ICEA S-87-640; Free of hazardous substances according to RoHS 2002/95/EG

Applications: Aerial, Duct

Corning ALTOS cable with FastAccess technology is an all-dielectric gel-free cable designed for outdoor and limited indoor use for campus backbones in lashed aerial and duct installations. The innovative FastAccess technology feature combined with the all-dielectric gel-free loose tube design simplifies removal of the cable jacket reducing cable end access time by at least 50 percent. Equally important is the overall reduction in risk of inadvertent fiber damage and risk to installers from sharp cab le access tools. The cable is fully waterblocked using craft-friendly, water-swellable materials, which means no clean up is required. The flexible buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation and environmental rigors while allowing easy mid-span access. The all-dielectric gel-free cable construction requires no bonding or grounding, and these cables have a medium-density polyethylene jacket that is rugged, durable and easy to handle. A variety of fiber types are available including 62.5 um and 50 um, single-mode and hybrid versions, as well as fibers with Gigabit and 10 Gigabit Ethernet performance.

Attributes

• Fiber Type: OS2 SINGLE-MODE
• Cable Type: LOOSE TUBE
• Fiber Count: 6
• All-Dielectric: YES
• Armored: NO
• Rodent Protected: NO
• Self-Support: NO
• Cable O.D. (in.): 0.41
• Cable O.D. (mm): 10.5
• Max. Tensile Load Installation N: 2700
• Max. Tensile Load Long Term. N: 890
• Min. Bend Radius Installation (cm): 15.8
• Min. Bend Radius Installation (in.): 6.2
• Min. Bend Radius Long Term (cm): 10.5
• Min. Bend Radius Long Term (in.): 4.1
• No. of Fibers: 6
• Max. Tensile Load Installation (lb.): 600
• Max. Tensile Load Long Term. (lb.): 200
• Unspsc Code: 26121637

24-F OS2 LT ALTOS BINDERLESS FAST ACCESS CABLE

This is Corning Cable Systems Altos 24 strand fiber optic cable part number 024ZU4-T4F22D20 and is designed for outdoor and limited indoor use for campus backbones in lashed aerial and duct installations.

The loose tube gel-free design is fully water blocked using craft-friendly, water-swellable materials, which means cable access is simple and no clean up is required. The flexible craft-friendly buffer tubes are easy to route in closures and the SZ-stranded,loose tube design isolates fibers from installation and environmental rigors while allowing easy midspan access. The all-dielectric cable construction requires no bonding or grounding and these cables have a medium-density polyethylene jacket that is rugged, durable and easy to strip.

Attributes

• Fiber Type: OS2 SINGLE-MODE
• Cable Type: LOOSE TUBE
• Fiber Count: 24
• All-Dielectric: YES
• Armored: NO
• Rodent Protected: NO
• Self-Support: NO
• Unspsc Code: 26121637

ALTOS® Loose Tube, Gel-Free, All-Dielectric 144 fiber Cable

FastAccess(TM) Technology, Single-mode (OS2), max. attenuation 0.4 dB/km

Common Installations: Outdoor lashed aerial and duct; indoor when installed according to National Electrical Code (NEC) Article 770; Design and Test Criteria: ANSI/ICEA S-87-640; Free of hazardous substances according to RoHS 2002/95/EG

Applications: Aerial, Duct

Corning ALTOS cable with FastAccess technology is an all-dielectric gel-free cable designed for outdoor and limited indoor use for campus backbones in lashed aerial and duct installations. The innovative FastAccess technology feature combined with the all-dielectric gel-free loose tube design simplifies removal of the cable jacket reducing cable end access time by at least 50 percent. Equally important is the overall reduction in risk of inadvertent fiber damage and risk to installers from sharp cab le access tools. The cable is fully waterblocked using craft-friendly, water-swellable materials, which means no clean up is required. The flexible buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation and environmental rigors while allowing easy mid-span access. The all-dielectric gel-free cable construction requires no bonding or grounding, and these cables have a medium-density polyethylene jacket that is rugged, durable and easy to handle. A variety of fiber types are available including 62.5 um and 50 um, single-mode and hybrid versions, as well as fibers with Gigabit and 10 Gigabit Ethernet performance.

Attributes

• Fiber Type: OS2 SINGLE-MODE
• Cable Type: LOOSE TUBE
• Fiber Count: 144
• All-Dielectric: YES
• Armored: NO
• Rodent Protected: NO
• Self-Support: NO
• Cable O.D. (in.): 0.62
• Cable O.D. (mm): 15.8
• Max. Tensile Load Installation N: 2700
• Max. Tensile Load Long Term. N: 890
• Min. Bend Radius Installation (cm): 23.7
• Min. Bend Radius Installation (in.): 9.3
• Min. Bend Radius Long Term (cm): 15.8
• Min. Bend Radius Long Term (in.): 6.2
• No. of Fibers: 144
• Max. Tensile Load Installation (lb.): 600
• Max. Tensile Load Long Term. (lb.): 200
• Unspsc Code: 26121637

ALTOS® Loose Tube, Gel-Free, All-Dielectric Cable

Common Installations: Outdoor lashed aerial and duct; indoor when installed according to National Electrical Code (NEC) Article 770; Design and Test Criteria: ANSI/ICEA S-87-640; Free of hazardous substances according to RoHS 2002/95/EG

Applications: Aerial, Duct

Corning ALTOS cable with FastAccess technology is an all-dielectric gel-free cable designed for outdoor and limited indoor use for campus backbones in lashed aerial and duct installations. The innovative FastAccess technology feature combined with the all-dielectric gel-free loose tube design simplifies removal of the cable jacket reducing cable end access time by at least 50 percent. Equally important is the overall reduction in risk of inadvertent fiber damage and risk to installers from sharp cab le access tools. The cable is fully waterblocked using craft-friendly, water-swellable materials, which means no clean up is required. The flexible buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation and environmental rigors while allowing easy mid-span access. The all-dielectric gel-free cable construction requires no bonding or grounding, and these cables have a medium-density polyethylene jacket that is rugged, durable and easy to handle. A variety of fiber types are available including 62.5 um and 50 um, single-mode and hybrid versions, as well as fibers with Gigabit and 10 Gigabit Ethernet performance.

Attributes

• Fiber Type: OS2 SINGLE-MODE
• Cable Type: LOOSE TUBE
• Fiber Count: 96
• All-Dielectric: YES
• Armored: NO
• Rodent Protected: NO
• Self-Support: NO
• Cable O.D. (in.): 0.48
• Cable O.D. (mm): 12.1
• Max. Tensile Load Installation N: 2700
• Max. Tensile Load Long Term. N: 890
• Min. Bend Radius Installation (cm): 18.2
• Min. Bend Radius Installation (in.): 7.2
• Min. Bend Radius Long Term (cm): 12.1
• Min. Bend Radius Long Term (in.): 4.8
• No. of Fibers: 96
• Max. Tensile Load Installation (lb.): 600
• Max. Tensile Load Long Term. (lb.): 200
• Unspsc Code: 26121637

FREEDM® One Tight-Buffered Cable - Single-mode (OS2)

Applications: Aerial, Direct Buried, Duct, General Purpose Horizontal, Vertical Riser

Corning FREEDM One riser cables are flame-retardant, UV-resistant, indoor/outdoor cables designed for aerial and duct applications with no need for a transition splice when entering the building. The tight-buffered construction facilitates easier termination for low-fiber-count applications in the local area network (LAN) and eliminates the need for fan-out kits. The design features TIA-598 color-coded 900 Um buffered fibers for easy identification, consistent stripping and direct termination. The s mall diameter and bend radius of the cable allow for easy installation in space-constrained areas while the innovative waterblocking technology is ideal for outside plant (OSP) applications. The all-dielectric cable construction requires no grounding o r bonding, and the UV-resistant, flame-retardant jacket is rugged, durable and easy to strip.

Attributes

• Fiber Type: OS2 SINGLE-MODE
• Cable Type: TIGHT BUFFERED
• Fiber Count: 12
• Fire Rating: RISER
• All-Dielectric: YES
• Armored: NO
• Rodent Protected: NO
• Cable O.D. (in.): 0.36
• Cable O.D. (mm): 6.5
• Max. Tensile Load Installation N: 675
• Max. Tensile Load Long Term. N: 200
• Min. Bend Radius Installation (cm): 9.8
• Min. Bend Radius Installation (in.): 3.8
• Min. Bend Radius Long Term (cm): 6.5
• Min. Bend Radius Long Term (in.): 2.6
• No. of Fibers: 12
• Max. Tensile Load Installation (lb.): 150
• Max. Tensile Load Long Term. (lb.): 45
• Unspsc Code: 26121607

FREEDM® One Tight-Buffered Cable - Single-mode (OS2)

Applications: Aerial, Direct Buried, Duct, General Purpose Horizontal, Vertical Riser, Plenum

Corning FREEDM One plenum cables are flame-retardant, UV-resistant, indoor/outdoor cables designed for aerial and duct applications with no need for a transition splice when entering the building. The tight-buffered construction facilitates easier termination for low-fiber-count applications in the local area network (LAN) and eliminates the need for fan-out kits. The design features TIA-598 color-coded 900 Um buffered fibers for easy identification, consistent stripping and direct termination. The small diameter and bend radius of the cable allow for easy installation in space-constrained areas while the innovative waterblocking technology is ideal for outside plant (OSP) applications. The all-dielectric cable construction requires no grounding or bonding, and the UV-resistant, flame-retardant jacket is rugged, durable and easy to strip.

Attributes

• Fiber Type: OS2 SINGLE-MODE
• Cable Type: TIGHT BUFFERED
• Fiber Count: 6
• Fire Rating: PLENUM
• All-Dielectric: YES
• Armored: NO
• Rodent Protected: NO
• Cable O.D. (in.): 0.21
• Cable O.D. (mm): 5.3
• Max. Tensile Load Installation N: 675
• Max. Tensile Load Long Term. N: 200
• Min. Bend Radius Installation (cm): 8.0
• Min. Bend Radius Installation (in.): 3.0
• Min. Bend Radius Long Term (cm): 2.7
• Min. Bend Radius Long Term (in.): 1.0
• No. of Fibers: 6
• Max. Tensile Load Installation (lb.): 150
• Max. Tensile Load Long Term. (lb.): 45
• Unspsc Code: 26121607

FREEDM® One Tight-Buffered Cable -  Single-mode (OS2)

Applications: Aerial, Direct Buried, Duct, General Purpose Horizontal, Vertical Riser

Corning FREEDM One riser cables are flame-retardant, UV-resistant, indoor/outdoor cables designed for aerial and duct applications with no need for a transition splice when entering the building. The tight-buffered construction facilitates easier termination for low-fiber-count applications in the local area network (LAN) and eliminates the need for fan-out kits. The design features TIA-598 color-coded 900 Um buffered fibers for easy identification, consistent stripping and direct termination. The s mall diameter and bend radius of the cable allow for easy installation in space-constrained areas while the innovative waterblocking technology is ideal for outside plant (OSP) applications. The all-dielectric cable construction requires no grounding o r bonding, and the UV-resistant, flame-retardant jacket is rugged, durable and easy to strip.

Attributes

• Fiber Type: OS2 SINGLE-MODE
• Cable Type: TIGHT BUFFERED
• Fiber Count: 6
• Fire Rating: RISER
• All-Dielectric: YES
• Armored: NO
• Rodent Protected: NO
• Cable O.D. (in.): 0.22
• Cable O.D. (mm): 5.5
• Max. Tensile Load Installation N: 675
• Max. Tensile Load Long Term. N: 200
• Min. Bend Radius Installation (cm): 8.3
• Min. Bend Radius Installation (in.): 3.2
• Min. Bend Radius Long Term (cm): 5.5
• Min. Bend Radius Long Term (in.): 2.2
• No. of Fibers: 6
• Max. Tensile Load Installation (lb.): 150
• Max. Tensile Load Long Term. (lb.): 45
• Unspsc Code: 26121607

MIC® Tight-Buffered Plenum Cable - Single-mode (OS2)

Applications: General Purpose Horizontal, Vertical Riser, Plenum

Corning MIC interlocking armored plenum cables are designed for use in plenum, riser and general purpose environments for intrabuilding backbone and horizontal installations. These multifiber cables use individually jacketed 900 um buffered fibers enabling easy, consistent stripping and facilitating termination. The fibers are grouped into jacketed subunits and surrounded by a dielectric central member.

The core is protected by a flexible, spirally wrapped, aluminum interlocking armor that offers easy, one-step installation and up to seven times the crush protection of unarmored cables. With a flame-retardant outer jacket, this cable is particularly useful for heavy traffic or more challenging mechanical exposure conditions and applications requiring extra rugged cables.

Attributes

• Fiber Type: OS2 SINGLE-MODE
• Cable Type: TIGHT BUFFERED
• Fiber Count: 6
• Fire Rating: PLENUM
• Armored: YES
• Cable O.D. (in.): 0.48
• Cable O.D. (mm): 12.2
• Max. Tensile Load Installation N: 440
• Max. Tensile Load Long Term. N: 132
• Min. Bend Radius Installation (cm): 18.3
• Min. Bend Radius Installation (in.): 7.2
• Min. Bend Radius Long Term (cm): 12.2
• Min. Bend Radius Long Term (in.): 4.8
• No. of Fibers: 6
• Max. Tensile Load Installation (lb.): 100
• Max. Tensile Load Long Term. (lb.): 30
• Unspsc Code: 26121607

Altos loose Tube, Gel-free - Single-mode (OS2)

Corning ALTOS cable with Binderless FastAccess technology is an all-dielectric gel-free cable designed for outdoor and limited indoor use for lashed aerial and duct installations. The innovative FastAccess technology feature combined with the gel-free binderless loose tube design simplifies removal of the cable jacket and accessing the buffer tubes. The loose tube design uses Corning's SMF-28 Ultra fiber to provide reliable transmission parameters for a variety of voice, data, video and imaging applications. The cable is fully waterblocked using craft-friendly, water-swellable materials, which means no cleanup is required. The flexible buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation and environmental rigors while allowing easy midspan access. The all-dielectric gel-free cable construction requires no bonding or grounding, and these cables have a medium-density polyethylene jacket that is rugged, durable and easy to handle. Corning's patented Binderless FastAccess Technology refers to the combination of a Corning FastAccess Technology jacket with an innovative technology used to bind cable construction through the manufacturing process, eliminating the use of binder yarns and waterblocking tapes.

Attributes

• Fiber Type: OS2 SINGLE-MODE
• Cable Type: LOOSE TUBE
• Fiber Count: 72
• All-Dielectric: YES
• Armored: NO
• Rodent Protected: NO
• Self-Support: NO
• Unspsc Code: 26121637

Altos loose Tube, Gel-free, All-dielectric, Non-armored Cables

Corning ALTOS cable with Binderless FastAccess technology is an all-dielectric gel-free cable designed for outdoor and limited indoor use for lashed aerial and duct installations. The innovative FastAccess technology feature combined with the gel-free binderless loose tube design simplifies removal of the cable jacket and accessing the buffer tubes. The loose tube design uses Corning's SMF-28 Ultra fiber to provide reliable transmission parameters for a variety of voice, data, video and imaging applications. The cable is fully waterblocked using craft-friendly, water-swellable materials, which means no cleanup is required. The flexible buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation and environmental rigors while allowing easy midspan access. The all-dielectric gel-free cable construction requires no bonding or grounding, and these cables have a medium-density polyethylene jacket that is rugged, durable and easy to handle. Corning's patented Binderless FastAccess Technology refers to the combination of a Corning FastAccess Technology jacket with an innovative technology used to bind cable construction through the manufacturing process, eliminating the use of binder yarns and waterblocking tapes.

Attributes

• Fiber Type: OS2 SINGLE-MODE
• Cable Type: LOOSE TUBE
• Fiber Count: 48
• All-Dielectric: YES
• Armored: NO
• Unspsc Code: 26121637

Altos loose Tube, Gel-free, All-dielectric, Non-armored Cables

Corning ALTOS cable with Binderless FastAccess technology is an all-dielectric gel-free cable designed for outdoor and limited indoor use for lashed aerial and duct installations. The innovative FastAccess technology feature combined with the gel-free binderless loose tube design simplifies removal of the cable jacket and accessing the buffer tubes. The loose tube design uses Corning's SMF-28 Ultra fiber to provide reliable transmission parameters for a variety of voice, data, video and imaging applications. The cable is fully waterblocked using craft-friendly, water-swellable materials, which means no cleanup is required. The flexible buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation and environmental rigors while allowing easy midspan access. The all-dielectric gel-free cable construction requires no bonding or grounding, and these cables have a medium-density polyethylene jacket that is rugged, durable and easy to handle. Corning's patented Binderless FastAccess Technology refers to the combination of a Corning FastAccess Technology jacket with an innovative technology used to bind cable construction through the manufacturing process, eliminating the use of binder yarns and waterblocking tapes.

Attributes

• Fiber Type: OS2 SINGLE-MODE
• Cable Type: LOOSE TUBE
• Fiber Count: 12
• All-Dielectric: YES
• Armored: NO
• Rodent Protected: NO
• Self-Support: NO
• Unspsc Code: 26121637

FREEDM One Tight-Buffered Cable 4 F Single-mode

4 F, Single-mode (OS2)

Corning FREEDM® One riser cables are flame-retardant, UV-resistant, indoor/outdoor cables designed for aerial, duct and direct-buried applications with no need for a transition splice when entering the building. The tight buffered construction facilitates easier termination for low -fiber-count applications in the local area network (LAN) and eliminates the need for fan-out kits. The design features TIA-598 color-coded 900 μm TBII® buffered fibers for easy identification, consistent stripping and direct termination. The small diameter and bend radius of the cable allow for easy installation in space-constrained areas while the innovative waterblocking technology is ideal for outside plant (OSP) applications. The all-dielectric cable construction requires no grounding or bonding, and the UV-resistant, flame-retardant jacket is rugged, durable and easy to strip.

Attributes

• Cable Type: TIGHT BUFFERED
• Fiber Count: 4
• Fire Rating: RISER
• All-Dielectric: NO
• Armored: NO
• Rodent Protected: NO
• Unspsc Code: 26121607

24-F ALTOS GEL-FREE CBL W/ FASTACCESS TECH CABLE

Corning Cable Systems ALTOS^® Lite™ Gel-Free, Single-Jacket, Single-Armored Cables are designed for campus backbones in direct-buried installations. The loose tube design provides stable and highly reliable transmission parameters for a variety of voice, data, video and imaging applications. These cables also provide high-fiber density within a given cable diameter while allowing flexibility to suit many system configurations.

The single armored construction provides additional crush and rodent protection with a high-strength ripcord under the armor for easy stripping. Gel-free means the cables are fully waterblocked using craft-friendly, water-swellable materials which make cable access simple and require no clean up. The flexible, craft-friendly buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation and environmental rigors while allowing easy midspan access. These cables have a medium density polyethylene jacket that is rugged, durable and easy to strip.

Attributes

• Fiber Type: OS2 SINGLE-MODE
• Cable Type: LOOSE TUBE
• Fiber Count: 24
• All-Dielectric: NO
• Armored: YES
• Rodent Protected: NO
• Self-Support: NO
• Unspsc Code: 26121637