OS2

PATCHBOX Plus+ Fiber Optic

PATCHBOX is the state of the art cable management system; fast and neat. It replaces conventional cable management and patch cords completely with an all-in-one solution.

With its retractable cables the PATCHBOX provides the user with the exact cable length needed. No more overly long cables, creating a cabinet full of cable spaghetti. Installation time is dramatically reduced and due to the clean setup maintenance can even be done remotely further reducing costs.

ORGANISED. STRUCTURED.

With PATCHBOX you can achieve the impossible: a forever clean and neat network rack. Save money with faster troubleshooting, maintenance and restructuring messy network racks. PATCHBOX even brings logic to your network rack so you can replace a faulty network switch in 3 minutes. Say goodbye to expensive switches with redundant power supplies and get a PATCHBOX instead.

FASTEST TROUBLESHOOTING. EVER.

Not only replacing a network switch is child's play with PATCHBOX but also daily tasks like changing a network connection. Due to the integrated straight run cables it is much simpler to trace a patch cord - taking a fraction of the time compared to the conventional method. Adding a new connection? The patch cords in a PATCHBOX are always ready and waiting to be patched.

MODULAR. FLEXIBLE.

Have VLAN's or applications you would like to optically separate from each other for faster troubleshooting and interaction or just need a fibre optic uplink? Swap a cassette just by pressing both release buttons and removing it from the PATCHBOX Frame another cassette can then be slid in and secures itself in the frame.

SPACE SAVER & CORD KEEPER.

Save money thanks to the PATCHBOX. It not only stores your unused patch cords safely and ensures they are ready when you need them it also allows a higher density in your network rack compared to conventional methods. That equals more gear in the same space with more overview.

MINIMUM EFFORT FOR MAXIMUM EFFECT.

The PATCHBOX is designed with speed and ease in mind. The installation of a PATCHBOX and patching all 24 patch cords is around 8 times faster than doing the exact same job with traditional patch cords and cable management. Maintenance work like moves, adds and changes or a switch replacement is even 10 times faster.

Note: There is a 3-5 business day lead time for this product

Single Mode SCP-EasyFiber™ with Corning® SMF-28® Ultra OS2 9/125

EF-OS2P-2DIST-BK-XXXX - 2 Strand OS2 Plenum Bend Insensitive SCP-EasyFiber™ w/Corning® SMF-28® Ultra - 2 Strand Tight Buffered Distribution, Single Mode OS2 9/125, UL Plenum OFNP, Indoor/Outdoor UV Sun Res Black Jacket, Reel in Box

SCP-EasyFiber™ Single Mode OS2 Cables - OS2 9/125, UL Plenum OFNP - Indoor/Outdoor Rated

SCP-EasyFiber™ Single Mode with Corning® SMF-28® Ultra delivers the best installation and macrobending performance for Single Mode fiber. SCP-EasyFiber™ Single Mode is a full-spectrum single mode fiber that experiences virtually no signal loss in tight bends and challenging cable routes. Installs "Like Copper"; Saves on Installation Costs. Compatible with conventional industry equipment & standards. Indoor/Outdoor - Plenum OFNP; Riser OFNR; and LSZH EN50575 EuroClass Dca-s1,d1,a1 (EU only).

Part No. Explanation: EF= SCP-EasyFiber™ with special Corning Glass Fibers (Higher Performing and Bend Insensitive); DUP= Duplex (2 Strand Siamese Side x Side); SIMPLEX= 1 Fiber Strand; DIST= Tight Buffered Distribution Cable (Fiber strands inside Overall Jacket); Drop= Rugged Simplex Indoor/Outdoor; OS2= Single Mode 9/125; P= Plenum OFNP; OFNP= Optical Fiber Non-Conductive Plenum; LSZH= Low Smoke Zero Halogen EN50575 EuroClass Dca-s1,d1,a1

SSF OS2, Micro Distribution Loose Tube, Riser Indoor

Cleerline™ D9125SMOS2R is a Single-mode OS2 Micro Distribution cable that has an overall riser jacket.

Cleerline SSF™ Micro Distribution single-mode fiber is fully compatible with all common connector systems for standard 9/125 single-mode fiber.

The included SSF™ fiber provides extreme durability and strength.

Techlogix Networx Single Mode OS2 Fiber Optic Cable

The TechLogix ECO series delivers an ecologically sound product at an economical price.

ECOFiber is made using bend-insensitive Corning SMF-28 Ultra OS2 fiber and costs up to 30% less than competing brands of optical cable.

It's also friendlier to the environment than copper cabling. Less energy goes into producing fiber cabling and fiber-based systems have a lower energy consumption and smaller installation footprint. Plus, all ECOFiber products ship in minimally processed recyclable packaging. 

ECOFiber is designed to withstand tight bends (10mm minimum bend radius), challenging cable routes, rough handling and terminates in just a few minutes.

Standard SKUs are available in reels of 1,000 and 2,000 feet. Custom constructions and cuts are available upon request. 

patchbox.one / 30RU / Fiber Optic

Keep your network rack organized in the long term and downtimes at a minimum with the patchbox.one, consisting of 24 retractable fiber optical cables, the most bend-insensitive on the market.

• Super flexible Corning® ClearCurve® Fiber Optic Cables
• Cables always in your desired length
• 10/40/100 Gb/s
• 23.62" Installation Depth
• For 2-Post Racks and 4-Post Racks

See how our cassettes work

The easily exchangeable patchbox.one / Cassettes contain our flat ethernet cables. They are tested to ISO/IEC 11801 Ea Class and ANSI/EIA/TIA-568 Cat 6A Channel standards, RoHS compliant and capable of PoE (STP: PoE / UTP: PoE++ Type 3). Our cables are available in multiple colours and variants: as shielded or unshielded Cat. 6a cables (STP/UTP) and also as optical fiber (OS2/OM4) – the only length adaptable fiber optic cables on the market.

Installed and ready to rock in a few minutes

Save money thanks to the patchbox.one. The cable system retracts and stores unused cables safely and ensures they are ready when you need them. It also allows a higher density in your network rack than conventional methods. That equals more gear in the same space with more overview without the service of a cabling company.

Turn your Rack from a beast into a beauty

Keep your rack forever organized with our innovative cable management system. Simply retract unused cables or overlength back into the cassette to keep a better overview and simplify your network cabling. The Patchcatch, our 0RU cable manager alternative, helps you to manage your cables. Unlike conventional cable managers it does not waste a single rack unit, allowing you to use up to 50% more space in your rack.

SSF™ Interlocking Armored Micro-Distribution LT, Plenum, 9/125, G657 A2/B2 OS2

Cleerline SSF™ Single-Mode OS2 Aluminum Interlocking Armored cable consists of spirally wrapped internal aluminum strip with an overall Plenum jacket. This cable provides high crush resistance and protection from rugged environments.

Cleerline SSF™ Single-mode OS2 is fully compatible with all common connector systems for standard 9/125 single-mode fiber.

SSF OS2, Micro Distribution Loose Tube, Plenum Indoor/Outdoor

Cleerline™ D9125SMOS2P is a Single-mode OS2 Micro Distribution cable that has an overall plenum jacket.

Cleerline SSF™ Micro Distribution single-mode fiber is fully compatible with all common connector systems for standard 9/125 single-mode fiber.

The included SSF™ fiber provides extreme durability and strength.

SSF OS2, Micro Distribution Loose Tube, LSZH-CPR Indoor/Outdoor

Cleerline™ 4D9125SMOS2L is a 4 strand single-mode OS2 Micro Distribution cable with an overall LSZH jacket.

Cleerline SSF™ Micro Distribution multimode fiber is fully compatible with all common connector systems for standard 9/125 single-mode fiber.

The included SSF™ fiber provides extreme durability and strength.

SSF OS2, Rugged Micro Distribution Loose Tube, Riser Indoor/Outdoor

Cleerline™ RMD9125OS2R fiber cable is a Single-mode OS2 Micro Distribution with an overall 6.1 mm riser rated PVC jacket. This cable features a rugged outer jacket with a 1.25 mm thickness and incorporates fiberglass yarns for rodent resistance.

The Rugged Micro Distribution is designed to withstand harsher environments, with a maximum tensile load of 2700 N or 607 lbf during installation. The cable’s black PVC jacket is UV resistance, and the fiber strands are color-coded per TIA/EIA 598C standards for easy identification.

Cleerline SSF™ Rugged Micro Distribution single-mode is fully compatible with all common connector systems for standard 9/125 single-mode fibers.

SSF OS2, Single Tube Micro Distribution Loose Tube, Plenum Indoor/Outdoor

Cleerline™ 24STD9125SMOS2P is a single-mode OS2 fiber optic cable designed for high-density data communication backbones. With an overall plenum-rated jacket, this cable features a single loose tube construction, making it ideal for both inter-building and intra-building installations.

It is fully compatible with all common connector systems for standard 9/125 single-mode fiber. The cable includes SSF™ fibers that offer exceptional durability and strength, with up to 10,000 times the bend longevity of traditional fiber.

SSF Duplex Hybrid, Plenum Indoor/Outdoor

The Hybrid Demarc Duplex Fiber Cable combines one strand of SSF™ fiber and one strand of BendSafe® fiber in a zipcord construction, encased in a 3.0 mm plenum-rated jacket. This innovative design is tailored for service provider installations, offering the benefits of SSF™ fiber's incredible durability and the familiarity of traditional BendSafe® fiber. The SSF™ strand features a 250 µm "Soft Peel" coating for easy handling, while the BendSafe® fiber includes a 900 µm buffer coating.

This hybrid cable is designed to meet the needs of installations requiring both mechanical splice and fusion splice terminations. It offers superior mechanical strength, high bend insensitivity, and is compatible with all common 9/125 single-mode connectors. This cable is ideal for inter-building and intra-building communications, service demarcations, and other environments where robust and reliable fiber performance is essential.

SSF Duplex OS2, LSZH-CPR Indoor/Outdoor

The Duplex Fiber Cable is a 9/125 single-mode OS2 cable, designed with a zipcord construction featuring two 3.0 mm LSZH cables. If desired, the cable’s zipcord construction allows easy separation of the fiber strands.

The SSF™ Duplex cable is compatible with all common connector systems for standard single-mode 9/125 fibers. The included SSF™ fibers provide extreme durability and strength, with up to 10,000 times the bend insensitivity of traditional fiber.

LSZH CPR-rated (Europe compliant) and non-rated USA requirements

SSF OS2, Armored Direct Burial Micro Distribution Loose Tube, PE/OSP/Burial

Cleerline SSF™ Single-mode OS2 Armored Corrugated Steel Micro Distribution cable with an overall PE jacket.

The core is protected by a corrugated armored steel tube that offers easy installation and high crush resistance. A polyethylene, UV-resistant jacket protects the cable, allowing direct burial.

Cleerline SSF™ Armored Single-mode is fully compatible with all common connector systems for standard 9/125 single-mode fiber.

This product offers bend performance beyond EIA SP2840A, superior crush resistance, and superior pull.

Vertical Cable Optical Fiber Plenum Cable, Tight Buffer, Singemode, OS2, Plenum, Indoor/Outdoor