Shop
Networking
Bulk Wire & Cable
Cables
Racks & Enclosures
Tools
Audio/Video/Home
HDMI
Mounts
Security
Adapters
Usb/Mobile/Tablet
Electrical
Technical Furniture
Shop Brands
FireFold
ICC
Intellinet Network Solutions
Jonard Tools
j5create
Kendall Howard
Netstrand
Paige Electric
Platinum Tools
Quest
Rhino Brackets
SimplyBrands
Structured Cable Products
Vanco
Vertical Cable
Wavenet
World Cord Sets
View All
About Us
Customer Service
Returns
Order Status
Shipping Policy
Customer Reviews
Contact Us
70497971000
Support@FireFold.com
Free Shipping on Orders > $99.99 - *Some Exclusions May Apply
Filter
Simplex Drop OS2 SCP-EasyFiber™ w/Corning® SMF-28® Ultra - Simplex Single Mode OS2 9/125, 4.8mm, Indoor/Outdoor UL Riser OFNR, UV, White
EF-OS2R-SIM-WT - Simplex Drop OS2 Riser Bend Insensitive SCP-EasyFiber™ w/Corning® SMF-28® Ultra - Simplex Single Mode OS2 9/125, 4.8mm, Indoor/Outdoor UL Riser OFNR, UV Sun Res White/Neutral Jacket, 2000ft/610m Reel in Box
SCP-EasyFiber™ Single Mode OS2 Cables - OS2 9/125, UL Riser OFNR
SCP-EasyFiber™ Single Mode with Corning® SMF-28® Ultra delivers the best installation and macrobending performance for Single Mode fiber. SCP-EasyFiber™ Single Mode is a full-spectrum single mode fiber that experiences virtually no signal loss in tight bends and challenging cable routes. Installs "Like Copper"; Saves on Installation Costs. Compatible with conventional industry equipment & standards. Indoor/Outdoor - Plenum OFNP; Riser OFNR; and LSZH EN50575 EuroClass Dca-s1,d1,a1 (EU only).
Part No. Explanation: EF= SCP-EasyFiber™ with special Corning Glass Fibers (Higher Performing and Bend Insensitive); DUP= Duplex (2 Strand Siamese Side x Side); SIMPLEX= 1 Fiber Strand; DIST= Tight Buffered Distribution Cable (Fiber strands inside Overall Jacket); Drop= Rugged Simplex Indoor/Outdoor; OS2= Single Mode 9/125; P= Plenum OFNP; OFNP= Optical Fiber Non-Conductive Plenum; LSZH= Low Smoke Zero
$384.00
Select Options
OS2 Plenum SCP-EasyFiber™ w/Corning® SMF-28® Ultra - Tight Buffered Distribution Single Mode OS2 9/125, UL Plenum OFNP, Indoor/Outdoor UV
EF-OS2P-2DIST-BK-XXXX - 2 Strand OS2 Plenum Bend Insensitive SCP-EasyFiber™ w/Corning® SMF-28® Ultra - 2 Strand Tight Buffered Distribution, Single Mode OS2 9/125, UL Plenum OFNP, Indoor/Outdoor UV Sun Res Black Jacket, Reel in Box
Part No. Explanation: EF= SCP-EasyFiber™ with special Corning Glass Fibers (Higher Performing and Bend Insensitive); DUP= Duplex (2 Strand Siamese Side x Side); SIMPLEX= 1 Fiber Strand; DIST= Tight Buffered Distribution Cable (Fiber strands inside Overall Jacket); Drop= Rugged Simplex Indoor/Outdoor; OS2= Single Mode 9/125; P= Plenum OFNP; OFNP= Optical Fiber Non-Conductive Plenum; LSZH= Low Smoke Zero Halogen EN50575 EuroClass Dca-s1,d1,a1
From $245.43 - $925.94
Cleerline SSF™ Micro-Distribution LT, Riser, 9/125 G657 A2/B2 OS2
Cleerline™ D9125SMOS2R is a Single-mode OS2 Micro Distribution cable that has an overall riser jacket.
Cleerline SSF™ Micro Distribution single-mode fiber is fully compatible with all common connector systems for standard 9/125 single-mode fiber.
The included SSF™ fiber provides extreme durability and strength.
From $0.60 - $905.00
10% offat checkout
Techlogix Networx Single Mode OS2 Bulk Cable - ECOFiber
The TechLogix ECO series delivers an ecologically sound product at an economical price.
ECOFiber is made using bend-insensitive Corning SMF-28 Ultra OS2 fiber and costs up to 30% less than competing brands of optical cable.
It's also friendlier to the environment than copper cabling. Less energy goes into producing fiber cabling and fiber-based systems have a lower energy consumption and smaller installation footprint. Plus, all ECOFiber products ship in minimally processed recyclable packaging.
ECOFiber is designed to withstand tight bends (10mm minimum bend radius), challenging cable routes, rough handling and terminates in just a few minutes.
Standard SKUs are available in reels of 1,000 and 2,000 feet. Custom constructions and cuts are available upon request.
From $337.62 - $1,652.19
Cleerline Simplex SSF™ I/O, 9/125, G657 A2/B2 OS2
Cleerline™ S19125SMOSX fiber cable is a Simplex single-mode OS2 fiber optic cable in an overall 3mm jacket incorporated with SSF™ technology. Features a 250µm single strand with aramid yarns for protection and color-coded to TIA/598C. Cleerline SSF™ Simplex single-mode is fully compatible with all common connector systems for standard 9/125 single-mode fiber. The included SSF™ fiber with its Nd = 30 rating provides extreme durability and strength with up to 10,000 times the bend insensitivity of traditional fiber. LSZH CPR-rated (Europe compliant) and non-rated USA requirements
From $0.34 - $301.07
Cleerline SSF™ Interlocking Armored Micro-Distribution LT, Plenum, 9/125, G657 A2/B2 OS2
Cleerline SSF™ Single-Mode OS2 Aluminum Interlocking Armored cable consists of spirally wrapped internal aluminum strip with an overall Plenum jacket. This cable provides high crush resistance and protection from rugged environments.
Cleerline SSF™ Single-mode OS2 is fully compatible with all common connector systems for standard 9/125 single-mode fiber.
From $2.92 - $2,918.75
Cleerline SSF™ Micro-Distribution LT, Plenum I/O, 9/125 G657 A2/B2 OS2
Cleerline™ D9125SMOS2P is a Single-mode OS2 Micro Distribution cable that has an overall plenum jacket.
From $0.50 - $1,325.00
Cleerline SSF™ Micro-Distribution LT, LSZH-CPR I/O, 9/125 G657 A2/B2 OS2
Cleerline™ 4D9125SMOS2L is a 4 strand single-mode OS2 Micro Distribution cable with an overall LSZH jacket.
Cleerline SSF™ Micro Distribution multimode fiber is fully compatible with all common connector systems for standard 9/125 single-mode fiber.
From $0.64 - $906.66
Cleerline SSF™ Rugged Micro-Distribution LT, Riser I/O, 9/125, G657 A2/B2 OS2
Cleerline™ RMD9125OS2R fiber cable is a Single-mode OS2 Micro Distribution with an overall 6.1 mm riser rated PVC jacket. This cable features a rugged outer jacket with a 1.25 mm thickness and incorporates fiberglass yarns for rodent resistance.
The Rugged Micro Distribution is designed to withstand harsher environments, with a maximum tensile load of 2700 N or 607 lbf during installation. The cable’s black PVC jacket is UV resistance, and the fiber strands are color-coded per TIA/EIA 598C standards for easy identification.
Cleerline SSF™ Rugged Micro Distribution single-mode is fully compatible with all common connector systems for standard 9/125 single-mode fibers.
From $1.30 - $2,580.00
Cleerline SSF™ Single Tube Micro-Distribution LT, Plenum I/O, 9/125, G657 A2/B2 OS2
Cleerline™ 24STD9125SMOS2P is a single-mode OS2 fiber optic cable designed for high-density data communication backbones. With an overall plenum-rated jacket, this cable features a single loose tube construction, making it ideal for both inter-building and intra-building installations.
It is fully compatible with all common connector systems for standard 9/125 single-mode fiber. The cable includes SSF™ fibers that offer exceptional durability and strength, with up to 10,000 times the bend longevity of traditional fiber.
From $2.44 - $2,021.67
Cleerline Duplex SSF™/Traditional Plenum I/O, 9/125, G657 A2/B2 OS2
The Hybrid Demarc Duplex Fiber Cable combines one strand of SSF™ fiber and one strand of BendSafe® fiber in a zipcord construction, encased in a 3.0 mm plenum-rated jacket. This innovative design is tailored for service provider installations, offering the benefits of SSF™ fiber's incredible durability and the familiarity of traditional BendSafe® fiber. The SSF™ strand features a 250 µm "Soft Peel" coating for easy handling, while the BendSafe® fiber includes a 900 µm buffer coating.
This hybrid cable is designed to meet the needs of installations requiring both mechanical splice and fusion splice terminations. It offers superior mechanical strength, high bend insensitivity, and is compatible with all common 9/125 single-mode connectors. This cable is ideal for inter-building and intra-building communications, service demarcations, and other environments where robust and reliable fiber performance is essential.
From $0.64 - $525.00
Cleerline Duplex SSF™ Riser, 9/125, G657 A2/B2 OS2
The Duplex Fiber Cable is a 9/125 single-mode OS2 cable, designed with a zipcord construction featuring two 3.0 mm riser cables. The cable’s zipcord construction allows easy separation of the fiber strands if desired.
The SSF™ Duplex cable is fully compatible with all common connector systems for standard single-mode 9/125 fibers. The included SSF™ fibers provide extreme durability and strength, with up to 10,000 times the bend insensitivity of traditional fiber.
From $0.50 - $411.67
Cleerline Duplex SSF™ Plenum I/O, 9/125, G657 A2/B2 OS2
The Duplex Fiber Cable is a 9/125 single-mode OS2 cable, designed with a zipcord construction featuring two 3.0 mm plenum cables. The cable’s zipcord construction allows easy separation of the fiber strands if desired.
From $0.60 - $491.67
Cleerline Duplex SSF™ LSZH-CPR I/O, 9/125, G657 A2/B2 OS2
The Duplex Fiber Cable is a 9/125 single-mode OS2 cable, designed with a zipcord construction featuring two 3.0 mm LSZH cables. If desired, the cable’s zipcord construction allows easy separation of the fiber strands.
The SSF™ Duplex cable is compatible with all common connector systems for standard single-mode 9/125 fibers. The included SSF™ fibers provide extreme durability and strength, with up to 10,000 times the bend insensitivity of traditional fiber.
LSZH CPR-rated (Europe compliant) and non-rated USA requirements
From $0.68 - $561.66
Cleerline SSF™ Armored Direct Burial Micro-Distribution LT, PE/OSP/Burial, 9/125, G657 A2/B2 OS2
Cleerline SSF™ Single-mode OS2 Armored Corrugated Steel Micro Distribution cable with an overall PE jacket.
The core is protected by a corrugated armored steel tube that offers easy installation and high crush resistance. A polyethylene, UV-resistant jacket protects the cable, allowing direct burial.
Cleerline SSF™ Armored Single-mode is fully compatible with all common connector systems for standard 9/125 single-mode fiber.
This product offers bend performance beyond EIA SP2840A, superior crush resistance, and superior pull.
From $1.84 - $3,583.33
Vertical Cable Optical Fiber Plenum Cable, Tight Buffer, Singemode, OS2, Plenum, Indoor/Outdoor
From $250.00 - $826.39
West Penn Interlocked Armor Distribution Cable - 12 Fiber OS2 OFCP, By the Foot
$1.64
Duplex Zip OS2 Riser SCP-EasyFiber™ w/Corning® SMF-28® Ultra - Duplex Single Mode OS2 9/125, 2.0mm, UL Riser OFNR, Yellow
EF-OS2R-DUP-YL - Duplex Zip OS2 Riser Bend Insensitive SCP-EasyFiber™ w/Corning® SMF-28® Ultra - Duplex Zip Single Mode OS2 9/125, 2.0mm, UL Riser OFNR, Yellow Jacket, 2000ft/610m Reel In Box
$337.06
ALTOS Lite(tm) Loose Tube, Gel-free, Single-jacket, Single-armored Cable, 6 Fiber, Single-mode (OS2), Max. Attenuation 0.4 Db/km
Corning Cable Systems ALTOS® Lite™Gel-Free, SingleJacket, Single-Armored Cables are designed for campus backbones in direct-buried installations. The loose tube design provides stable and highly reliable transmission parameters for a variety of voice, data, video and imaging applications. These cables also provide high-fiber density within a given cable diameter while allowing flexibility to suit many system configurations. The single armored construction provides additional crush and rodent protection with a high-strength ripcord under the armor for easy stripping. Gel-free means the cables are fully waterblocked using craft-friendly, water -swellable materials which make cable access simple and require no clean up. The flexible, craft-friendly buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation and environmental rigors while allowing easy midspan access. These cables have a medium density polyethylene jacket that is rugged, durable and easy to strip.
Call For Quote: (704) 979-7100
12-F ALTOS GEL-FREE CBL W/ FASTACCESS TECH SINGLE-JKT/ SINGLE-ARMOR SMF-28
Applications: Aerial, Direct Buried, Duct
Corning ALTOS Lite gel-free, single-jacket, single-armored cables with FastAccess technology are designed for direct-buried installations. The innovative FastAccess technology feature combined with the gel-free loose tube design simplifies removal of t he cable jacket and accessing the buffer tubes. The gel-free design means the cables are fully waterblocked using craft-friendly water-swellable materials which makes cable access simple and require no clean up. The loose tube design uses Corning's SMF- 28 Ultra fiber to provide reliable transmission parameters for a variety of voice, data, video and imaging applications. The flexible buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation a nd environmental rigors while allowing easy midspan access. The single-armored construction provides additional crush and rodent protection. These cables have a medium-density polyethylene jacket that is rugged, durable and easy to strip.
ALTOS® Loose Tube, Gel-Free, All-Dielectric Cable with FastAccess(TM) Technology, 6 fiber, Single-mode (OS2), max. attenuation 0.4 dB/km
Common Installations: Outdoor lashed aerial and duct; indoor when installed according to National Electrical Code (NEC) Article 770; Design and Test Criteria: ANSI/ICEA S-87-640; Free of hazardous substances according to RoHS 2002/95/EG
Applications: Aerial, Duct
Corning ALTOS cable with FastAccess technology is an all-dielectric gel-free cable designed for outdoor and limited indoor use for campus backbones in lashed aerial and duct installations. The innovative FastAccess technology feature combined with the all-dielectric gel-free loose tube design simplifies removal of the cable jacket reducing cable end access time by at least 50 percent. Equally important is the overall reduction in risk of inadvertent fiber damage and risk to installers from sharp cab le access tools. The cable is fully waterblocked using craft-friendly, water-swellable materials, which means no clean up is required. The flexible buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation and environmental rigors while allowing easy mid-span access. The all-dielectric gel-free cable construction requires no bonding or grounding, and these cables have a medium-density polyethylene jacket that is rugged, durable and easy to handle. A variety of fiber types are available including 62.5 um and 50 um, single-mode and hybrid versions, as well as fibers with Gigabit and 10 Gigabit Ethernet performance.
24-F OS2 LT ALTOS BINDERLESS FAST ACCESS DIELECTRIC GELFREE 0.34/0.34/0.22 DB/KM
This is Corning Cable Systems Altos 24 strand fiber optic cable part number 024ZU4-T4F22D20 and is designed for outdoor and limited indoor use for campus backbones in lashed aerial and duct installations.
The loose tube gel-free design is fully water blocked using craft-friendly, water-swellable materials, which means cable access is simple and no clean up is required. The flexible craft-friendly buffer tubes are easy to route in closures and the SZ-stranded,loose tube design isolates fibers from installation and environmental rigors while allowing easy midspan access. The all-dielectric cable construction requires no bonding or grounding and these cables have a medium-density polyethylene jacket that is rugged, durable and easy to strip.
ALTOS® Loose Tube, Gel-Free, All-Dielectric Cable with FastAccess(TM) Technology, 144 fiber, Single-mode (OS2), max. attenuation 0.4 dB/km
ALTOS® Loose Tube, Gel-Free, All-Dielectric Cable with FastAccess(TM) Technology, 96 fiber, Single-mode (OS2), max. attenuation 0.4 dB/km
FREEDM® One Tight-Buffered Cable, Riser, 12 fiber, Single-mode (OS2)
Applications: Aerial, Direct Buried, Duct, General Purpose Horizontal, Vertical Riser
Corning FREEDM One riser cables are flame-retardant, UV-resistant, indoor/outdoor cables designed for aerial and duct applications with no need for a transition splice when entering the building. The tight-buffered construction facilitates easier termination for low-fiber-count applications in the local area network (LAN) and eliminates the need for fan-out kits. The design features TIA-598 color-coded 900 Um buffered fibers for easy identification, consistent stripping and direct termination. The s mall diameter and bend radius of the cable allow for easy installation in space-constrained areas while the innovative waterblocking technology is ideal for outside plant (OSP) applications. The all-dielectric cable construction requires no grounding o r bonding, and the UV-resistant, flame-retardant jacket is rugged, durable and easy to strip.
FREEDM® One Tight-Buffered Cable, Plenum, 6 fiber, Single-mode (OS2)
Applications: Aerial, Direct Buried, Duct, General Purpose Horizontal, Vertical Riser, Plenum
Corning FREEDM One plenum cables are flame-retardant, UV-resistant, indoor/outdoor cables designed for aerial and duct applications with no need for a transition splice when entering the building. The tight-buffered construction facilitates easier termination for low-fiber-count applications in the local area network (LAN) and eliminates the need for fan-out kits. The design features TIA-598 color-coded 900 Um buffered fibers for easy identification, consistent stripping and direct termination. The small diameter and bend radius of the cable allow for easy installation in space-constrained areas while the innovative waterblocking technology is ideal for outside plant (OSP) applications. The all-dielectric cable construction requires no grounding or bonding, and the UV-resistant, flame-retardant jacket is rugged, durable and easy to strip.
FREEDM® One Tight-Buffered Cable, Riser, 6 fiber, Single-mode (OS2)
MIC® Tight-Buffered, Interlocking Armored Cable, Plenum, 6 fiber, Single-mode (OS2)
Applications: General Purpose Horizontal, Vertical Riser, Plenum
Corning MIC interlocking armored plenum cables are designed for use in plenum, riser and general purpose environments for intrabuilding backbone and horizontal installations. These multifiber cables use individually jacketed 900 um buffered fibers enabling easy, consistent stripping and facilitating termination. The fibers are grouped into jacketed subunits and surrounded by a dielectric central member.
The core is protected by a flexible, spirally wrapped, aluminum interlocking armor that offers easy, one-step installation and up to seven times the crush protection of unarmored cables. With a flame-retardant outer jacket, this cable is particularly useful for heavy traffic or more challenging mechanical exposure conditions and applications requiring extra rugged cables.
Altos loose Tube, Gel-free, All-dielectric, Non-armored Cables With Binderless Fastaccesstechnology, 72 F, Single-mode (OS2)
Corning ALTOS cable with Binderless FastAccess technology is an all-dielectric gel-free cable designed for outdoor and limited indoor use for lashed aerial and duct installations. The innovative FastAccess technology feature combined with the gel-free binderless loose tube design simplifies removal of the cable jacket and accessing the buffer tubes. The loose tube design uses Corning's SMF-28 Ultra fiber to provide reliable transmission parameters for a variety of voice, data, video and imaging applications. The cable is fully waterblocked using craft-friendly, water-swellable materials, which means no cleanup is required. The flexible buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation and environmental rigors while allowing easy midspan access. The all-dielectric gel-free cable construction requires no bonding or grounding, and these cables have a medium-density polyethylene jacket that is rugged, durable and easy to handle. Corning's patented Binderless FastAccess Technology refers to the combination of a Corning FastAccess Technology jacket with an innovative technology used to bind cable construction through the manufacturing process, eliminating the use of binder yarns and waterblocking tapes.
Altos loose Tube, Gel-free, All-dielectric, Non-armored Cables With Binderless Fastaccesstechnology, 48 F, Single-mode (OS2)
Altos loose Tube, Gel-free, All-dielectric, Non-armored Cables With Binderless Fastaccesstechnology, 12 F, Single-mode (OS2)
4-F 8.3/125 TB IN/OUT RISER 1.0/0.75 DB/KM FREEDOM ONE
Corning FREEDM® One riser cables are flame-retardant, UV-resistant, indoor/outdoor cables designed for aerial, duct and direct-buried applications with no need for a transition splice when entering the building. The tight buffered construction facilitates easier termination for low -fiber-count applications in the local area network (LAN) and eliminates the need for fan-out kits. The design features TIA-598 color-coded 900 μm TBII® buffered fibers for easy identification, consistent stripping and direct termination. The small diameter and bend radius of the cable allow for easy installation in space-constrained areas while the innovative waterblocking technology is ideal for outside plant (OSP) applications. The all-dielectric cable construction requires no grounding or bonding, and the UV-resistant, flame-retardant jacket is rugged, durable and easy to strip.
24-F ALTOS GEL-FREE CBL W/ FASTACCESS TECH SINGLE-JKT/ SINGLE-ARMOR SMF-28
Corning Cable Systems ALTOS® Lite™ Gel-Free, Single-Jacket, Single-Armored Cables are designed for campus backbones in direct-buried installations. The loose tube design provides stable and highly reliable transmission parameters for a variety of voice, data, video and imaging applications. These cables also provide high-fiber density within a given cable diameter while allowing flexibility to suit many system configurations.The single armored construction provides additional crush and rodent protection with a high-strength ripcord under the armor for easy stripping. Gel-free means the cables are fully waterblocked using craft-friendly, water-swellable materials which make cable access simple and require no clean up. The flexible, craft-friendly buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation and environmental rigors while allowing easy midspan access. These cables have a medium density polyethylene jacket that is rugged, durable and easy to strip.
×
×