Celebrate America

Vextra 1000ft Solid CMR Cat6 Cable - 550MHz 23AWG USA Made

Vextra VC64B solid CMR Cat6 Ethernet cable is perfect for commercial and home networking, internet, control and monitoring circuitry and telephone lines. Solid 23AWG copper conductors and quality American-made manufacturing ensure a reliable connection every time.

Kendall Howard 1916-2-100 Wall Mount V-Rack

Kendall Howard is one of the top companies out in the rack mount market. Their merchandise ranges to various products besides rack mounts alone, though, and are always high quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

Kendall Howard V-Racks allow you to vertically or horizontally mount servers or other rack-mountable devices regardless of depth. Designed to mount on a wall or under a desk, the Kendall Howard V-Rack provides users more versatility on where they can place their products while saving them space.

These v-racks are low profile, meant to be barely visible from a front view. Each can hold up to 150 pounds easily, so most of your equipment should be able to be on them. They only weigh about 4 pounds themselves, so they are relatively lightweight for easy installation. Each one of these comes in a black powdered finish so that they will blend in with most of your other mounting equipment with ease.

Made in the USA and backed by a limited lifetime warranty from Kendall Howard, you really cannot go wrong with this great product.

What else could you ask for? Well, you might say to yourself, “I could go for a great price.” You’re in luck! You’re at FireFold, where our middle name might as well big ‘great price’. It is not, but, that doesn’t mean you cannot get a price. Just glance up there in the upper right and drool in amazement. You’ll be happy when you make this purchase and so will your wallet!

Platinum Tools Cat5E EZ-RJ45 Connector

As anyone who has ever planned their network knows, terminating Ethernet cables isn’t necessarily hard. It can be a tedious process, though, and it is necessary to speed and functionality to get it correct. If you have a lot of cables to connect or if you’re a network professional, the amount of time spent on getting conductors just right can be frustrating and even wasteful. You have to measure carefully to ensure you are clipping the precise length of wire to fit snugly into your connector and often you have to assume your pins have stayed in the right order before you crimp them.

Platinum Tools, a leading designer and manufacturer of network wiring instruments, has created a patented EZ system to eliminate many of the headaches associated with those tiny connectors. Product number 100003C is a pack of Cat5E EZ-RJ45 connectors for Cat5E installations. These connectors can be used with most ordinary crimpers, but the full benefits can only be experienced when used with an EZ-RJ45 crimp tool.

The Difference

The initial steps for adding an EZRJ45 connector onto a Cat5E Ethernet cable is the same. You score the outer jacket and remove an inch and a half, snipping the pull thread to get it out of your way once you have enough of the conductors exposed. Untwist the pairs and line them up according to your chosen wiring diagram. Then, instead of measuring where you need to snip off the excess wire, you skip straight to inserting the cable into the connector. Thanks to the all-transparent pull-through design, you can quickly check to make sure the correct wire pinout has been maintained by checking the wires that have come out the end of the connector and by looking into the body of the connector itself. Once everything is lined up properly, crimp the connector on. The EZ-RJ45 tool will crimp and cut away the extra wire all in one squeeze.

Arlington Nail On Low Voltage Mounting Bracket

LVN Bracket

Install your low voltage cables in a fraction of the time with the Arlington LVN Nail-On Mounting Bracket. The non-metallic, non-conductive, plastic construction makes them perfect for Class 2 networking and audio-video cabling runs. Designed for bare wood studs in new construction areas, these brackets come with a pair of angled captive nails and arrive ready to install. Simply tap the nails into the side of the exposed stud and you’re done.

They include a molded loop for tying off wires and a side tab for added stability. The unique side-fastening nail-in process also increases accuracy by decreasing pushback. The LVN low voltage mounting bracket is for use with standard wallplates and faceplates. These nail-in style boxes are also available in two, three, and four-gang configurations. They are UL listed and CSA rated for low voltage use and are not compatible with electrical wiring.

1000ft Solid Cat6 Plenum-Rated Bulk Cable - Made in the USA

Perfect for any networking application where Plenum Rated network cable is a requirement. FireFold's Cat6 Plenum-Rated Bulk Cable is a must-have for any extensive networking installation.

Plenum (CMP) Rated PVC Jacket

Plenum-rated Cat6 cable contains a flame retardant PVC jacket and is designed for cable runs being laid in spaces defined as "Air Plenums", this includes raised flooring systems, air handling ducts, etc. Plenum jackets produce less smoke than traditional PVC jackets.

Solid Cable Design

Designed for more straight-forward, simple installations, this particular style of Solid cable is perfect for most installations where cable runs do not require several bends and twists in the line.

23 AWG

For this particular cable, the gauge is 23 AWG, which is a diameter of about 0.0226 Inches, or 0.573mm. 23AWG is the Industry Standard for any typical network cable installation. American Wire Gauge (AWG) is the standardized gauging system for measuring wire sizes.

Pull-Through Design

Since bulk cable is generally used in intervals, the box that it comes in is almost as important as the cable itself. This is the reason why our boxes are reinforced to provide excellent protection and are made with a simple pull-through design to keep your bulk cable free of kinks and knots while being pulled from the box.

Platinum Tools Cat6 RJ45 EZ-RJ45 Connector 50pk

As anyone who has ever planned their network knows, terminating Ethernet cables isn’t necessarily hard. It can be a tedious process, though, and it is critical to speed and functionality to get it correct. If you have a lot of cables to connect or if you’re a network professional, the amount of time spent on getting conductors just right can be frustrating and even wasteful. You have to measure carefully to ensure you are clipping the precise length of wire to fit snugly into your connector and often you have to assume your pins have stayed in the right order before you crimp them.

Platinum Tools, a leading designer and manufacturer of network wiring instruments, has created a patented EZ system to eliminate many of the headaches associated with those tiny connectors. Product number 100010C is a 50-pack of Cat6 EZ-RJ45 connectors. These connectors can be used with most ordinary crimpers, but the full benefits can only be experienced when used with an EZ-RJ45 crimp tool.

The Difference

The initial steps for adding an EZRJ45 connector onto a Cat6 Ethernet cable is the same. You score the outer jacket and remove an inch and a half, snipping the pull thread to get it out of your way once you have enough of the conductors exposed. Untwist the pairs and line them up according to your chosen wiring diagram. Then, instead of measuring where you need to snip off the excess wire, you skip straight to inserting the cable into the connector. Thanks to the all-transparent pull-through design, you can quickly check to make sure the correct wire pin-out has been maintained by checking the wires that have come out the end of the connector and by looking into the body of the connector itself. Once everything is lined up properly, crimp the connector on. The EZ-RJ45 tool will crimp and cut away the extra wire all in one squeeze.

Quest Premier Raceway on a Roll 

Cover Your Tracks

The Premier Raceway FWF-14511 Cable Cover on a Roll is your shortcut to a tidy entertainment center. This 50ft long strip is 3/8" wide and it comes in a clean, convenient pizza box-sized dispenser. Installation of this cord cover is simple and only takes a few minutes, and the unique pull box allows you to cut just the right length of Raceway. This wire cover features a flat one-piece design that makes it especially easy to manage. Once you've cut off the length of strip you need, simply fold the base to create a channel for your cords. Ridges allow the duct shape to snap easily into place. You can either fold up the Raceway before it is mounted or after. The solvent-based adhesive foam tape on the back makes for a simple peel-and-stick mounting process. This cable cover is made of strong, durable flame-retardant PVC with a UV stabilizer to keep the color pure. Raceway is only available in white, but it can be easily painted to the color of your choice.

Arlington TVB2GW Recessed Wall Box

Arlington's non-metallic recessed indoor InBox allows items such as furniture or televisions to be placed closer to the wall. Arlington's InBox uses mounting wings to attach to the wall, so it is ideal for new or retrofit construction. This two gang 34.0 cubic inch InBox comes in white, is cULus listed, and has a two-hour fire rating. It comes with the recessed box, trim plate, wall plates, low voltage divider, and mounting/installation screws.

Quest Raceway Wire Hider | Cable Concealer 

In Hiding

What’s better than enjoying the low cost and high quality of FireFold’s extensive cable collection? Not having to see those cables running from your television! The easiest way to hide your wires from sight is the FWH-12411 from Quest. This premiere WireHider offers a professional look without the hassle of using wall plates. One inch wide, the four-foot strip of Raceway can accommodate several standard-size cables. There’s no need to be able to fit the bulky connectors through or wrestle to snap the cover back into place. A nearly invisible slit runs from end to end, allowing you to simply push your cables into place.

The FWH-12411 attaches to your wall by a strip of peel-and-stick adhesive. It is usually easier to run your cables through the WireHider after it is mounted to the wall or floor, but you can always add or remove cables easily even after it is set up. This strip is a single straight four-foot run, but it can easily be cut shorter using consumer-grade tools. With other Quest Raceway accessories, you can create curves, corners, and turns for a custom look in your home or business. Molded from smooth ABS plastic, this cable channel cannot be covered with latex paints, but the clean white color blends well with many styles of décor.

Platinum Tools Shielded Cat5E & Cat6 RJ45 EZ-RJ45 Connector

As anyone who has ever planned their network knows, terminating Ethernet cables isn’t necessarily hard. It can be a tedious process, though, and it is necessary to speed and functionality to get it correct. If you have a lot of cables to connect or if you’re a network professional, the amount of time spent on getting conductors just right can be frustrating and even wasteful. You have to measure carefully to ensure you are clipping the precise length of wire to fit snugly into your connector and often you have to assume your pins have stayed in the right order before you crimp them.

Platinum Tools, a leading designer and manufacturer of network wiring instruments, has created a patented EZ system to eliminate many of the headaches associated with those tiny connectors. Product number 100020 is the single shielded EZ-RJ45 connector. They are fully foil-shielded with an internal ground for interference-sensitive installations. These connectors can be used with most ordinary crimpers, but the full benefits can only be experienced when used with an EZ-RJ45 crimp tool.

The Difference

The initial steps for adding an EZRJ45 connector onto a shielded Ethernet cable is the same. You score the outer jacket and remove an inch and a half, snipping the pull thread to get it out of your way once you have enough of the conductors exposed. Untwist the pairs and line them up according to your chosen wiring diagram. Then, instead of measuring where you need to snip off the excess wire, you skip straight to inserting the cable into the connector. Thanks to the all-transparent pull-through design, you can quickly check to make sure the correct wire pinout has been maintained by checking the wires that have come out the end of the connector and by looking into the body of the connector itself. Once everything is lined up properly, crimp the connector on. The EZ-RJ45 tool will crimp and cut away the extra wire all in one squeeze.

Kendall Howard Wall Mount Server Rack

Kendall Howard is one of the top companies out in the rack mount market. They provide high-quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

This was the first wall mount rack that Kendall Howard designed. It did not take long for this rack to become the standard that all wall mount racks are measured against. This wall mount rack has an 18” maximum depth, but has a completely adjustable width. This makes it very convenient for pretty much any rack mount solution.

Details

This great wall mount rack comes in two pieces, making it able to be installed within about five minutes. It comes with standard pre-tapped 10-32 rails, but does not include a shelf with it. Besides it being able to be adjusted to any width, you can easily use gangs vertically across this rack mount. With it being heavy duty, this rack mount can even handle up to 350 pounds of weight - easily able to handle most equipment that you could set upon it.

With all of this and the reasonable price provided by FireFold, what more could you really want? Well, Kendall Howard throws in a limited lifetime warranty. So much to make your wallet happy, how can you deny yourself this great mount rack? Go ahead and grab one today for your next project.

Quest Premier Raceway on a Roll - 50ft, White

Cover Your Tracks

The Premier Raceway FWF-05511 Cable Cover on a Roll is your shortcut to a tidy entertainment center. This 50’ long strip is 1/2” wide and it comes in a clean, convenient pizza box-sized dispenser. Installation of this cord cover is simple and only takes a few minutes, and the unique pull box allows you to cut just the right length of Raceway. This wire cover features a flat one-piece design that makes it especially easy to manage. Once you’ve cut off the length of strip you need, simply fold the base to create a channel for your cords. Ridges allow the duct shape to snap easily into place. You can either fold up the Raceway before it is mounted or after. The solvent-based adhesive foam tape on the back makes for a simple peel-and-stick mounting process. This cable cover is made of strong, durable flame-retardant PVC with a UV stabilizer to keep the color pure. Raceway is only available in white, but it can be easily painted to the color of your choice.

Platinum Tools Cat6A ezEX™48 ezEX-RJ45® Connector

The Platinum Tools 202048J Cat6A ezEX™48 ezEX-RJ45® Connector is manufactured to provide easy termination when crimped onto Cat6A structured cabling. The unique design makes it easy to verify wiring sequences before terminating and allows larger conductors to pass through the front end. The integrated Hi-Lo stagger load bar isolates each conductor for higher performance.

ezEX™48 - ezEX-RJ45® connectors are made in the USA with high quality, American-made workmanship. This 100 pack comes in a resealable plastic jar for easy storage and portability.

These connectors are designed for use with the EXO™ Crimp Frame and EXO-EX Die (100061C).

Vertical Cable 500FT – CAT6, Plenum, MADE IN USA

23AWG, UTP, 4 Pair, Solid Bare Copper, 550MHz, Pull Box

Quest Premiere Raceway Wire Hider Cover

Put a Lid on it

When paired with the FWH-12411, the FCL-22411 WireHider Cover Lid from Quest helps create the cleanest look in cable management without opening up your wall. It is designed to go on top of the FWH-12411 WireHider cable channel to cover and conceal the flexible slit. It is an optional accessory, but it offers an ultimate layer of professionalism to any cable run. Adding this cover lid to your WireHider is a snap- literally. Once your cable channel is installed and your cables are inside, simply press the lid over the wire molding until it slides into place.

This strip is a single straight four-foot run, but it can easily be cut shorter using consumer-grade tools. With other Quest Raceway accessories, you can create curves, corners, and turns for a custom look in your home or business. This lid is 1” wide, so it is only compatible with the 1” version of Quest’s WireHider and corner pieces. Molded from smooth ABS plastic, this product cannot be covered with latex paints, but the clean white color blends well with many styles of décor.

Kendall Howard 2U 12" Vented Economy Rack Shelf

Kendall Howard is one of the top companies out in the rack mount market. They provide high quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

What you’re looking at today is a great 2U 12” vented economy component rack shelf. This component rack shelf is light-duty, made to only hold up to 25 pounds. 12 inches is great for cable boxes or light computers, with usually a little room to spare. The component rank shelf itself only weighs 5.40 pounds, making it very light for when installation is performed. Plus, this shelf has many holes across the base of it, allowing for plenty of air circulation to keep your components cool.

Details

This shelf is rated 2U. A U (unit) is the standard size for a single rack interval. While others can be 3U, there will be no such waste of space here. The specific dimensions are 19 inches wide, 12.112 inches deep, and 3.47 inches high.

The shelf is painted black, so it should easily blend in with practically any rack mounting that you are using. There are four mounting holes, allowing you to be able to secure this component shelf easily. But hey, if you do have any concerns, let them be put to rest! This great component shelf comes with a one year warranty from the manufacturer. We here at FireFold will help you get situated if there is ever a manufacturer issue with your product.

With all of the features this component shelf has, you really can’t go wrong. It’s simple, sleek, and ready to be a part of your project right now. Go ahead and click that button and get one of these added to your cart today! You will be happy that you did.

Constructed of heavy duty 1.5” wide structural steel and covered in a dual-layer of sturdy black powder coat, the CLB is built to last through installation and decades of use. They are UL listed and rated for a weight limit of 187lbs per foot. The open arrangement also allows easy access for routine maintenance, cleaning, and troubleshooting. Middle Atlantic’s legacy is one of quality and professionalism, and these cable ladders come with the assurance of a lifetime limited warranty against any manufacturer defects.

The CLB cable ladder can be combined with a new or pre-existing ladder and structural elements and it is compatible with many major brands of networking and installation accessories. Different lengths and widths are available from Middle Atlantic, as well as bends, corners, and sections with adjustable rungs. All ladder sections and accessories can be mixed and matched for the perfect configuration.

Kendall Howard 1U Tool-less 5X D-Ring Cable Manager

Kendall Howard is one of the top companies out in the rack mount market. They provide high quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

The Kendall Howard 1U 5X D-Ring Cable Manager combines the best parts of our D-Ring Cable Management Kit and our Cable Routing Blanks. The blend of D-rings and cable routing cutouts make this one of the most versatile cable managers on the market! Whether you’re routing cables from front to back of your cabinet or organizing and supporting patch cables, this 5X D-Ring Cable Manager will be an effective tool for your IT installation.

This 1U cable routing blank is 19” EIA compliant, so you can use it with nearly any rack mount solution that you plan to use. Of course, we recommend you use Kendall Howard with this piece of equipment for best results! However, it is not required. As long as the dimensions match up, you’ll be perfectly fine.

Details

The three inch by one and three-quarter inch opening that this D-rings provides a large supported area to organize and route cable bundles in two-post racks, wall mount racks, server racks, and more. This specific ring spacer comes with seven, large open cut-outs that provide ample room for routing various cables such as copper, fiber optic, telecom, and power cables.

Cable manager can be mounted in two different positions, maximizing your cable management options. Face the D-rings toward the front of the rack to easily manage and support patch cables, or face them toward the back of the rack where the open design provides easy support of trunk cables.

Included with the cable manager are tool-less clips that snap into any cage nut style rail while eliminating the need for hardware. Standard mounting holes can be used in conjunction with rack screws on tapped rails.

What possibly could you wish for more than this? Perhaps no damage to your wallet, I bet you’re saying. Well, this is FireFold. Of course your wallet will be feeling just fine afterwards!

Kendall Howard 0100-1-002-01 0.75" Rack Screws

All Kendall Howard 10-32 Rack Screws have a pilot point that helps prevent cross threading and guide the screw when being installed. Kendall Howard rack screws are cold forged and have a black oxide with wax finsh. These truss head screws are .75 inches long and install with any Phillips screw driver or bit.

HIDEit XB7 Xfinity XB7 Gateway Modem Mount

Struggling to find a home for your Xfinity XB7 router? Safely STOREit where you need it the most with the HIDEit XB7 Wall Mount! Mountable in three different directions, this wireless modem mount gives you the flexibility to safely store your Comcast Xfinity modem without compromises. Custom-designed to fit the xFi Gateway, this mount is made from 16-gauge steel for strength while the white powder coat protects and seamlessly blends with your device. Our Xfinity mount doesn't block Wi-Fi signals or ports, so you can be sure your internet won't slow down. Complete your office setup today with the HIDEit XB7!

Kendall Howard 12-24 Rack Screws 100 Pack

Kendall Howard is one of the top companies out in the rack mount market. They provide high quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

The Kendall Howard 12-24 Rack Screws are not your everyday hardware store item. The superior American-made quality should be your only choice for installing rack mount devices such as shelves, cable managers, servers, and other network, A/V and electronic equipment.

Specifications

These 12-24 pilot point rack screws are .75” in length and are compatible with Kendall Howard 12-24 tapped rail system. They can also be used with universal cage nut style rails when used with the 12-24 cage nuts that Kendall Howard provides. Each rack screw comes with a Phillips truss head, so installation is simple. Simply grab your Phillips head screwdriver or bit and get to work!

Every screw is RoHS compliant, meaning that they meet the highest quality and safety standards. Each one has been constructed from steel and finished with a black oxide coating to allow these screws to easily match most standard network racks, cabinets, and accessories.

This specific package comes with fifty in it, so you should have plenty to go around. If this sounds great to you, which it should, go ahead and add some to your cart today.

Quest Raceway Wire Hider | Cable Cord Concealer

In Hiding

What’s better than enjoying the low cost and high quality of FireFold’s extensive cable collection? Not having to see those cables running from your television! The easiest way to hide your wires from sight is the FWH-13414 from Quest. This premiere WireHider offers a professional look without the hassle of using wall plates. One inch wide, the four-foot strip of Raceway can accommodate several standard-size cables. There’s no need to be able to fit the bulky connectors through or wrestle to snap the cover back into place. A nearly invisible slit runs from end to end, allowing you to simply push your cables into place.

The FWH-13414 attaches to your wall by a strip of peel-and-stick adhesive. It is usually easier to run your cables through the WireHider after it is mounted to the wall or floor, but you can always add or remove cables easily even after it is set up. This strip is a single straight four-foot run, but it can easily be cut shorter using consumer-grade tools. With other Quest Raceway accessories, you can create curves, corners, and turns for a custom look in your home or business. Molded from smooth ABS plastic, this cable channel cannot be covered with latex paints, but the clean white color blends well with many styles of décor.

Quest Raceway Wire Hider Cover

Put a Lid on it

When paired with the FWH-11411, the FCL-21411 WireHider Cover Lid from Quest helps create the cleanest look in cable management without opening up your wall. It is designed to go on top of the FWH-11411 WireHider cable channel to cover and conceal the flexible slit. It is an optional accessory, but it offers an ultimate layer of professionalism to any cable run. Adding this cover lid to your WireHider is a snap- literally. Once your cable channel is installed and your cables are inside, simply press the lid over the wire molding until it slides into place.

This strip is a single straight four-foot run, but it can easily be cut shorter using consumer-grade tools. With other Quest Raceway accessories, you can create curves, corners, and turns for a custom look in your home or business. This lid is 1/2” wide, so it is only compatible with the 1/2” version of Quest’s WireHider and corner pieces. Molded from smooth ABS plastic, this product cannot be covered with latex paints, but the clean white color blends well with many styles of décor.

Klein Tools 28 Piece Electrician Tool Set

Klein Tools has tool kits to assist professionals with their demanding projects. The Klein Tools 28-Piece Tool Kit (Cat. No. 80028) has a great assortment of tools for any tradesman, including pliers, screwdrivers, nut drivers, hex key set, and more.

Versatile and Quick Mounting

The Middle Atlantic WM Series is perfect for almost any data or telecommunications component, assembles and mounts quickly due to the self-aligning and squaring ability. The rugged fixed steel construction allows for kinking and breaking prevention of glass fiber cables.

Quest Raceway Right Angles

On a Curve

Designed for use with cable cover systems, the FRA-31412 is a two-pack of right angle adapters that allows you to make a right angle turn against a flat surface. These work especially well with Quest’s Raceway-on-a-Roll and WireHider products. With these adapters, you can create and customize your own unique wire runs to best hide your cords from sight. Cut and position your straight cable cover runs, securing them to the floor or wall as instructed by the manufacturer. Then snap these corner covers easily into place to conceal the wires around the bend.

In addition to providing unparalleled cable management, the FRA-31412 also helps prolong cable life by protecting the cords within from the bumps and scrapes associated with everyday use. Molded from sturdy ABS plastics, these accessories are fire-retardant and UV-stabilized to prevent fading and staining. They are also latex-paintable for the ultimate in color-matching. In addition to these inside corner adapters, there are also options available for outside corners and inside corners.

Kendall Howard 2U 14" Vented Cantilever Rack Shelf

Kendall Howard is one of the top companies out in the rack mount market. They provide high quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

The Kendall Howard 2U 14” Vented Eco Shelf is a medium duty shelf that helps to maintain proper air circulation in your racks and cabinets. This vented eco shelf is rated to hold up to 50 lbs. The vented eco shelf is perfect for supporting monitors, switches and other lightweight network or A/V equipment.

Details

This specific vented shelf is 2U. A U (unit) is the standard size for a single rack interval. While others can be 3U, there will be no such waste of space here. The dimensions of this shelf is 19” (W) x 14” (D) x 3.47” (H), making it quite suitable for your custom rack work. It is easy to install with four mounting holes that can be used with rack screws. Plus, this vented rack shelf comes with rounded corners - eliminating sharp edges that could damage equipment or yourself.

If you’re looking for the top of the line with plenty of airflow, look no further! Go ahead and get yourself squared away without any further delay!

Kendall Howard 12-24 Rack Screws 50 Pack

Kendall Howard is one of the top companies out in the rack mount market. They provide high quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

The Kendall Howard 12-24 Rack Screws are not your everyday hardware store item. The superior American-made quality should be your only choice for installing rack mount devices such as shelves, cable managers, servers, and other network, A/V and electronic equipment.

Specifications

These 12-24 pilot point rack screws are .75” in length and are compatible with Kendall Howard 12-24 tapped rail system. They can also be used with universal cage nut style rails when used with the 12-24 cage nuts that Kendall Howard provides. Each rack screw comes with a Phillips truss head, so installation is simple. Simply grab your Phillips head screwdriver or bit and get to work!

Every screw is RoHS compliant, meaning that they meet the highest quality and safety standards. Each one has been constructed from steel and finished with a black oxide coating to allow these screws to easily match most standard network racks, cabinets, and accessories.

This specific package comes with fifty in it, so you should have plenty to go around. If this sounds great to you, which it should, go ahead and add some to your cart today.

Kendall Howard 10-32 Rack Screws 50 Pack

All Kendall Howard 10-32 Rack Screws have a pilot point that helps prevent cross threading and guide the screw when being installed. Kendall Howard rack screws are cold forged and have a black oxide with wax finish. These truss head screws are .75 inches long and install with any Phillips screw driver or bit.

Quest Premiere Raceway Inside Corners

On a Curve

Designed for use with cable cover systems, this product is an inside corner adapter. These work especially well with Quest’s Raceway-on-a-Roll and WireHider products. With these corner adapters, you can create and customize your own unique wire runs to best hide your cords from sight. Cut and position your straight cable cover runs, securing them to the floor or wall as instructed by the manufacturer. Then snap these corner covers easily into place to conceal the wires around the bend.

In addition to providing unparalleled cable management, the corner accessory also helps prolong cable life by protecting the cords within from the bumps and scrapes associated with everyday use. Molded from sturdy ABS plastics, these accessories are fire-retardant and UV-stabilized to prevent fading and staining. They are also latex-paintable for the ultimate in color-matching. In addition to these inside corner adapters, there are also options available for outside corners and non-corner right angles.

Kendall Howard 1915-1-400-00 CPU Bracket

Kendall Howard is one of the top companies out in the rack mount market. Their merchandise ranges to various products besides rack mounts alone, though, and are always high-quality products at a great price. These items, in general, are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

You’re in an office, and you’re tired of your computer being on the floor or want to get it setup on the side of your desk. Well, we have a solution for that! Kendall Howard's Desktop/Tower Wall Mount CPU Brackets are designed to get the computer off the floor and the desktop. The brackets make it easy to secure and mount any small-form-factor PC to the wall or side of the desk. The velcro strap secures the PC to the bracket.

Everyone needs a CPU bracket to protect their PC, but not everyone is smart enough to bother. Be smart and take action!

Computers located on the floor are in continual danger of being jostled and kicked, not to mention the difficulty in accessing the drives, ports, and card readers. Desktop computers and PC’s that sit on a desk take up valuable workspace look cluttered and unorganized and run the risk of being damaged by a soda or coffee spill. Kendall Howard's Desktop/Tower Wall Mount CPU Brackets protects the PC and creates a more functional, organized workspace.

That’s about it! You have a great, sturdy product just waiting to be bought. So, stop putting it off! Go ahead and get one of these today and get the job done. Need more than one? No problem! Our prices are so great that you’ll still be saving money. Buy from the USA today and rest assured that this product will last a long time.

Kendall Howard 10-32 Cage Nuts 100 Pack

Cage Nuts are used to install rackmount equipment into server rack cabinets, 4-post racks, wallmount cabinets and racks, and 2-post racks. Cage nut style rails are often referred to as universal mounting rails, which are the most common type of rails used today.

If a rack or cabinet has cage nut style rails or universal mounting rails, they will require cage nuts. The thread size of the cage nut and the thread size of the screw must be the same to properly install rackmount components.

Kendall Howard 10-32 Cage Nuts are made in the USA, from high quality American steel and are packaged in metal resealable tins. They are available in 50, 100 and 2500 packs.

LVDR2 Bracket

Streamline and simplify your retrofit project with Arlington’s LVDR2. This box allows you to combine one electrical and one low-voltage run into a single location, creating a clean look without any extra work. Designed for use with pre-existing construction, this combo bracket uses flip-up wings to stay fixed against the drywall. The tightening screw is easily accessible from the front of the bracket and the wings can adjust to accommodate drywall, paneling, and other materials up to 1.5” in thickness.

The power side of the LVDR2 includes a connector for Romex or other non-metallic electrical cables. On the low voltage side there are also knock-outs for conduit and raceway cable management covers- one ½” and one ¾”. These UL-listed combination boxes come in a standard two-gang size and can fit a variety of split power and low voltage wall plates for installation convenience.

Klein Tools Replacement Tree Climbing Gaffs

Safety should always be a priority, and linemen specifically require premium-quality climbing equipment. For use with Klein Tools' Tree Climbing Gaffs. Includes gaffs, TORX® screws, and wrench. 

Platinum Tools 100026C Connectors 50pk - FireFold

Platinum Solutions

As anyone who has ever planned their own network knows, terminating voice cables isn’t necessarily hard. It can be a tedious process, though, and it is important to speed and functionality to get it correct. If you have a lot of cables to connect or if you’re a network professional, the amount of time spent on getting conductors just right can be frustrating and even wasteful. You have to measure carefully to ensure you are clipping the precise length of wire to fit snugly into your connector and often you have to assume your pins have stayed in the right order before you crimp them.

Platinum Tools, a leading designer and manufacturer of network wiring instruments, has created a patented EZ system to eliminate many of the headaches associated with those tiny connectors. Product number 100026C is a 50-pack of EZ-RJ11/12 connectors. These connectors can be used with most ordinary crimpers, but the full benefits can only be experienced when used with an EZ crimp tool.

The Difference

The initial steps for adding an EZRJ11/12 connector onto a Cat3 cable is the same. You score the outer jacket and remove an inch and a half, snipping the pull thread to get it out of your way once you have enough of the conductors exposed. Untwist the pairs and line them up according to your chosen wiring diagram. Then, instead of measuring where you need to snip off excess wire, you skip straight to inserting the cable into the connector. Thanks to the all-transparent pull-through design, you can easily check to make sure the correct wire pin-out has been maintained by checking the wires that have come out the end of the connector and by looking into the body of the connector itself. Once everything is lined up properly, crimp the connector on. The EZ tool will crimp and cut away the extra wire all in one squeeze.

HIDEit DSkate Vertical Display Skateboard Mount

Have a kick a** board? MOUNTit! The HIDEit Display Skate Mount is the best way to vertically store your board while showing off your custom skateboard deck! This easy-to-install skateboard wall mount works with all complete skateboards including OG, Longboards, Penny Boards and more! Our unique U-shape steel bar cradles the trucks to securely hold your board in place, while the rubber dip coating prevents the bar from scratching your board. The Display Mount’s minimal design won’t take up a lot of space allowing you to mount it just about anywhere for easy grab ’n go access. So get your favorite boards off the ground and…cruise, DISPLAYit, repeat!

Kendall Howard V-Line Wall Mount Rack 18" Depth

The Kendall Howard 12U 18" Deep V-Line Wall Mount Rack is the perfect low-cost solution for IT installers and A/V technicians to use on a daily basis. Its open-frame design makes the rack easy to assemble and install, while its durability makes this rack reliable for years to come. For a simple and dependable open frame solution, check out the 12U 18" Deep V-Line Wall Mount Rack.

• 18" usable depth
• Cage Nut or 10-32 Tapped Rails
• 19" EIA compliant
• Made in the USA

Kendall Howard 0100-1-012-01 Rack Screws With Washers

All Kendall Howard 10-32 Rack Screws have a pilot point that helps prevent cross threading and guide the screw when being installed. Kendall Howard rack screws are cold forged and have a black oxide with wax finsh. These truss head screws are .75 inches long and install with any Phillips screw driver or bit.

Middle Atlantic UPS-RBP Replacement Battery

Hot Swappable Replacement Battery Pack

The hot swappable battery from Middle Atlantic provides up to 26 minutes of run time at full load UPS-1000R or 13 minutes at full load with the UPS-2200R. Keeping one of these handy will ensure you are always prepared for any power loss.

The CL-WRS is a ladder wall support bracket, designed for use with CL Series cable ladders. It is made of a robust steel construction with a scratch resistant powder coat finish. It's compatible with most major cable ladder brands and accessories, so it can be used in a variety of installations, both new and existing.

LVH1 Bracket

Mount your wall plates vertically or horizontally with Arlington’s LVH1. These non-metallic brackets are ideal for any Class 2 low voltage cable run including AV and networking applications. Designed for new construction, they attach easily to any standard wood or metal stud. With three mounting hole options, these brackets can be oriented in nearly any position with a minimum of adjustment and no increase in installation time. Sturdy side tabs also help stabilize the bracket against the stud, allowing for a secure assembly.

The LVH1 is compatible with any single gang low voltage wall plate including bulk pass-through, keystone, and even decora-style faceplates. They include a molded tie-off slot for your pre-wiring cabling runs. This bracket is for use with low voltage wiring only and is not compatible with electrical runs.

Quest Raceway Wire Hider Cover Lid

Put a Lid on it

When paired with the FWH-13414 , the FCL-23414 WireHider Cover Lid from Quest helps create the cleanest look in cable management without opening up your wall. It is designed to go on top of the FWH-13414 WireHider cable channel to cover and conceal the flexible slit. It is an optional accessory, but it offers an ultimate layer of professionalism to any cable run. Adding this cover lid to your WireHider is a snap- literally. Once your cable channel is installed and your cables are inside, simply press the lid over the wire molding until it slides into place.

This strip is a single straight four-foot run, but it can easily be cut shorter using consumer-grade tools. With other Quest Raceway accessories, you can create curves, corners, and turns for a custom look in your home or business. This lid is 1.5” wide, so it is only compatible with the 1.5” version of Quest’s WireHider and corner pieces. Molded from smooth ABS plastic, this product cannot be covered with latex paints, but the clean white color blends well with many styles of décor.

Kendall Howard 2U 14.75 Inch Economy Rack Shelf

Kendall Howard is one of the top companies out in the rack mount market. They provide high quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

What you’re looking at today is a great 2U 14.75” component rack shelf. This component rack shelf is light-duty, made to only hold up to 25 pounds. 14.75 inches is great for cable boxes or light computers, with usually a little room to spare. The component rank shelf itself only weighs 5.40 pounds, making it very light for when installation is performed.

Details

This shelf is rated 2U. A U (unit) is the standard size for a single rack interval. While others can be 3U, there will be no such waste of space here. The specific dimensions are 19 inches wide, 14.75 inches deep, and 3.47 inches high.

The shelf is painted black, so it should easily blend in with practically any rack mounting that you are using. There are four mounting holes, allowing you to be able to secure this component shelf easily. But hey, if you do have any concerns, let them be put to rest! This great component shelf comes with a one year warranty from the manufacturer. We here at FireFold will help you get situated if there is ever a manufacturer issue with your product.

With all of the features this component shelf has, you really can’t go wrong. It’s simple, sleek, and ready to be a part of your project right now. Go ahead and click that button and get one of these added to your cart today! You will be happy that you did.

Kendall Howard Fixed V-Line Wall Mount Rack

Kendall Howard is one of the top companies out in the rack mount market. Kendall Howard is renowned for engineering high quality products at a great price. These items are not found everywhere in general, but we at FireFold are helping you get connected to this great manufacturer.

Looking for an easy installation for a wall mount situation? Well, we’ve got you covered right here. The Kendall Howard V-Line Open Frame Fixed wall mount racks are the perfect low cost solution that IT Installers and AV Technicians use every day. Kendall Howard knockdown Fixed Wall Racks are incredibly easy to assemble and install.

Providing a 300 pound capacity for equipment, the bolt together assembly has a self-squaring design to make assembly easy. When a simple open frame wall mount rack is needed, the Kendall Howard V-Line Open Frame Fixed wall mount rack is a great option.

This simple product is made in the USA and comes with a limited lifetime warranty from Kendall Howard - so you know you are getting a great product.