PulseAudio

PulseAudio ARC Digital Audio Extender

The PulseAudio PAEXARC1 is an ARC Digital Audio Extender that allows digital audio to be routed from a display, back to a remote location or amplifier, over a single Cat5e/6 cable up to 492ft (150m). For displays without ARC capability, or when ARC settings are not working as they should, the built-in “ARC Backup Plan” is featured where audio can still be extended utilizing SPDIF. For applications where ARC signals need to be extended above HDMI® cabling limitations to an amplifier or distributed audio system, the PAEXARC1 is the perfect solution.

The range of the PAXEARC1 will vary depending on the HDMI®/ARC sample rates. For instance, higher sample rates, 192kHz, will be rated at 295ft (90m), while lower sample rates, 96kHz, will be rated at 492ft (150m).

Audio Delay Device

The PA-ADS1 is an analog audio delay device with simple stereo RCA audio input and output to resolve “lip sync” issues in audio and video systems. Often analog audio would be processed faster than the digital video content which results in audio and video out of sync. The PA-ADS1 is a simple and perfect solution with 16 increments to delay audio anywhere from 20ms to 340ms with a turn of a dial.

PulseAudio HDMI Audio Extractor with eARC And ARC

The PulseAudio PA-EARCX is an HDMI audio extractor that can de-embed or break out audio from an HDMI 4K HDR display equipped with Audio Return Channel (ARC) and/or Enhanced Audio Return Channel (eARC). Break out audio from the HDMI signal to a soundbar, A/V Receiver, or amplifier without affecting the HDMI 2.0 output to the main display. Features two HDMI outputs, one for video capable of passing 18 Gbps, 4K@60Hz with HDR content, while the second HDMI output is dedicated for extracting ARC/eARC audio. For extracting audio from the latest 4K and eARC components, the PA-EARCX is the perfect solution.

4 Pair Stereo Speaker Selector Box

The PulseAudio PA-SS4 Speaker Selector is a low profile speaker selector unit that allows for distribution of high level (amplified) stereo signals into multiple zones. The PulseAudio PA-SS4 features a manually activated impedance protection circuit that can be activated to prevent the impedance to a receiver, this protection keeps the receiver from dropping below 5 Ohms, regardless of the impedance rating of the speakers utilized. The impedance protection can also be de-activated, allowing for part of a planned system of impedance with matching volume controls. The result is great sound quality in every zone.

PulseAudio In-Wall 30W Addressable Bluetooth Amplifier

The PulseAudio PA230BWA is an in-wall addressable Bluetooth audio receiver with a built in 2x30W amplifier in a single gang wall plate form factor, that creates a simple distributed audio system to stream music over Bluetooth. Equipped with a Class D, 60 watt in-wall power amplifier that supports 4 Ohm and 8 ohm speakers. Features two ways of connectivity including a stereo input (3.5mm jack), and Bluetooth 5.0 for a wireless connection. Automatically switches sources with the priority for Bluetooth connectivity. Install in one zone with the ability to install multiple units in one building, as each unit can be uniquely addressable. Connect the PA230BWA to a computer to address the ID and password to allow for multiple and unique amplifiers on the same site without issue! For an amplified 2-channel setup that is simple to operate with a clean look, the PA230BWA is a great solution to play and control music from your phone, tablet, or computer to an amplified single zone. 

Universal Dual-Axis Speaker Mount up to 33lbs/15kg

The PASBR is a heavy-duty wall/ceiling speaker mount, holding speakers up to 15kg/33lbs. The large square plate attaches to the wall/ ceiling and the small rectangular plate attaches to the speaker. The dual-axis mount with compression locking allows for 90° tilt while offering 360° rotation. When fully stretched, the mount puts speakers 140mm/5.5" from the wall or ceiling. The included steel cable provides additional security and safety. 

Single Channel 40w 70/100 Volt Amplifier w/Mic Input

The PulseAudio PAV140 is an amplifier that produces 40 Watts with Class-D power that is able to output 70V or 100V. Features two stereo inputs (3.5mm jack for line in and (2) RCA for L&R), one digital input and one balanced MIC input, with integrated ducking functionality, EQ control, and MIC mixing. The MIC input supports three levels with condenser MIC, dynamic MIC and line level audio input. The single output channel supports up to 40W @8ohms and is able to be controlled manually, as well as with IR and RS232. Can be combined with multiple amplifiers within a system, with the ability of controlling each zone individually. The PAV140 is a great solution for any 70v/100v speaker application

Digital-Analog Audio Extender

The PulseAudio PA-EXTDA is a digital-analog audio extender over a single Cat5e/6. It is designed to extend the analog audio signals up to 170m, or digital audio signal up to 290m via toslink or coax audio input. Selecting the audio source is quick and easy with the use of a toggle switch. The toslink, coax, and RCA audio outputs are all synchronized and can be used simultaneously to provide digital and analog audio to 3 different audio devices at the same time without any lag between audio formats. With POC technology, the transmitter can be powered by the receiver for a for quick and easy installation.

2 Channel 120W Class D Amplifier

The PA2X amplifier series from PulseAudio are an ideal solution for residential and commercial audio installations that require a simple setup and great sound output. With a small footprint, but high output, these Class D amplifiers can sit on a desktop, or can easily be mounted on a wall or within a rack using the included mounting brackets. The amps can be used in a stereo system, but can also be switched for use in bridged or mono applications. The inputs consist of two stereo audio inputs, two RCA inputs, and a single 3.5mm input for versatility. Also includes an auto-ON feature so the units do not need to be powered manually, just hit play and the amps will power on automatically! With a broad range of power output to pick from, the Pulse Audio PA2X amplifier series are a great solution for any desired application.

Wall Plate Mixing Microphone and Analog Audio Extender

The PulseAudio PA-WPMIX Microphone Mixing Extender with dual-gang wall-plate transmitter extends and mixes balanced XLR and unbalanced analog audio signals up to 300m/984ft over a single Cat5e/6 cable. Mixing is done with an easy to use dial on the transmitting wall plate unit that is able to mix audio between the XLR and stereo AUX inputs. The PA-WPMIX also utilizes PoC (power over cable) technology so that the transmitter can be powered from the receiver with a single power supply allowing for flexibility. Have more than 2 sources needing to be mixed? No problem as an additional PA-TXMIX (sold separately) can be used and cascaded over a single Cat5e/6 for even larger solutions!

The PA-WPMIX includes two units: transmitting unit (PA-TXMIX-WP) and receiving unit (PA-RXMIX). The transmitting unit is used to capture the audio input(s) and carries the signals over a single Cat5e/6 cable. The receiving unit is responsible for converting the audio signals over the Cat5e/6 cable to a balanced XLR and 3.5mm stereo audio outputs.

PulseAudio Collaboration Video Bar USB 3.0 4K@60Hz

The PulseAudio PA-CVB1 Collaboration Video Bar is an all-in-one, compact design with crystal clear audio with 4K video, perfect for any conference room type application. Advanced AI algorithms allow for multiple framing technologies such as facial detection, sound positioning, and voice tracking to automatically frame meeting participants and adjust focus to always present the best view. Built-in 6-mic array voice tracks and zooms camera to any person who is speaking. Plug-and-play USB 3.0 connectivity, along with a 3.5mm stereo audio input allows for quick and seamless integration to any video conferencing equipment or software anywhere, and anytime! A truly ideal solution for all small and medium-sized collaboration spaces.

PulseAudio Streaming Audio Receiver

The PulseAudio PASTREAM2 is an analog and digital audio streamer that allows amplifiers and distributed audio systems to stream music over a wired or wireless internet connection. A great solution to stream music to any audio device, or create a wireless distributed audio system, all with an easy-to-use and intuitive app! Play and control music, downloaded or streamed from your phone, tablet, or computer. The PASTREAM2 is compatible with Airplay, and WiFi Direct (Miracast) devices that are found within the same network, allowing for songs to be shared easily in a distributed audio system. In addition, the PulseAudio Streaming mobile app is available on the iOS and Google Play App Stores and allows the end user to sync their Spotify, Qplay, TuneIn, iHeartRadio, Amazon Music, and Tidal accounts for an effortless and enhanced listening experience. Multiple PASTREAM, PASTREAM2, and PA230SWA devices (sold separately) can be managed within the same system using the PulseAudio Streaming app, allowing everyone to listen to their own music and playlists, or be combined for party mode!

PulseAudio Digital/Analog Audio Transmitter

The PulseAudio PA-TXMIX analog audio mixing transmitter is an optional add-on unit for the PA-EXMIX analog audio mixing extender over Cat5e/6. Have more than 2 sources need to be mixed? No problem as an additional PA-TXMIX can be used and cascaded over a single Cat5e/6 for even larger solutions!

PulseAudio Microphone Mixing Extender

The PulseAudio PA-EXMIX Microphone Mixing Extender over single Cat5e/6 extends analog audio signals up to 300m/984ft . Mixing is done with an easy to use dial on the transmitting unit that is able to mix audio between the XLR and stereo AUX inputs. The PA-EXMIX also utilizes PoC (power over cable) technology so that the transmitter can be powered from the receiver with a single power supply allowing for flexibility. Have more than 2 sources needing to be mixed? No problem as an additional PA-TXMIX (sold separately) can be used and cascaded over a single Cat5e/6 for even larger solutions!

The PA-EXMIX includes two units: transmitting unit (PA-TXMIX) and receiving unit (PA-RXMIX). The transmitting unit is used to capture the audio input(s) and carries the signals over a single Cat5e/6 cable. The receiving unit is responsible for converting the audio signals over the Cat5e/6 cable to a balanced XLR and 3.5mm stereo audio outputs.

PulseAudio Digital Optical Audio 3x1 Switch With IR

The PulseAudio PA-SW31T digital optical audio switcher allows for up to three SPDIF/ TOSLINK digital audio sources to be selected to play to a device with a SPDIF/TOSLINK digital audio optical input. Inputs can be selected with the provided IR remote, or with a 3rd party universal remote for easy and flexible control.

PulseAudio Stereo to Mono Audio Converter

The PA-SM21 Stereo to Mono Audio Converter can convert a stereo line level audio signal to a balanced mono audio output through the 3-pin terminal connecter. It can also adapt a balanced mono audio signal to an unbalanced mono audio signal using the dual RCA outputs. Small, compact and mountable metal chassis makes it a nice and easy solution when looking to convert your audio signal.

PulseAudio Single Channel 100W Amplifier With Mic Input

The PulseAudio PAV1100 is a 100 Watt Class-D power amplifier with output alternatively at 70V or 100V. Featuring stereo inputs (a 3.5mm jack for line
in and two RCA for L&R audio), one digital input and a balanced MIC input. Also features mic ducking functionality, EQ control, and mic mixing. The mic input supports three levels with condenser MIC, dynamic MIC & line level audio input. The single output channel supports up to 100W and is able to be controlled manually, as well as with RS232 and IR using the PAV140-IR (sold separately). Multiple PAV1100 amplifiers can be used, and can be addressed with different IDs to ensure each zone is able to be controlled individually. The PAV1100 is a perfect plug and play solution for any 70v/100v speaker application.

PulseAudio 6x6 Audio Distribution Amplifier

The PA66MK2 is a functional, easy-to-install, highly compatible, expandable, and user-friendly audio distribution system. It provides up to 25W @ 8 Ohm Power by Class D amplifier to up to 18 zones which at can be controlled by keypads (sold separately as PA66ACCS), RS232, IR, or via IP with provided RS232-IP and iOS and Android apps. Overall the distribution system is easy-to install, so every audiophile can enjoy the powerful audio wherever they are.

PulseAudio In Wall Wifi Streaming Amplifier 2x30w

The PulseAudio PA230SWA is an in-wall streaming audio receiver with a built in 2x30W amplifier in a single gang wall plate form factor, that creates a simple distributed audio system to stream music over a wireless internet connection. Install in one zone or multiple zones, a great solution to stream music and create a wireless distributed audio system, all while using the easy to use and intuitive PASTREAM app! Play and control music, downloaded or streamed from your phone, tablet, or computer. The PA230SWA is compatible with Airplay, and Wi-Fi Direct that are found within the same network, allowing for songs to be shared easily in a distributed audio system. In addition, a mobile app is available on iOS and Google Play marketplaces, and allows the end user to sync their Spotify, Amazon Music, Qplay, TuneIn, iHeartRadio, and Tidal accounts for an effortless and enhanced listening experience. Multiple PA230SWA amplifiers can be used within the same systems allowing everyone to listen to their own music and playlists or join multiple units together for a party mode! 

PulseAudio Balanced/Unbalanced Microphone Preamp

The PulseAudio PA-MICPRE is a microphone preamplifier that provides a small, simple, and easy-to-use microphone pre-amplification solution for a variety of applications. Featuring both balanced XLR and unbalanced 1/4” inputs and outputs, along with a single gain control with a clipping indicator. The 1/4” output is uniquely designed for use as a mono unbalanced output, or a stereo headphone output. A phantom power option is provided for use with condenser microphones. For any applications requiring a microphone to be added, the PA-MICPRE is a great solution that is simple and easy to use!

USB Audio Capture

The PulseAudio PACAPT1 is a device that allows analog audio to be streamed or recorded, resulting in converted content that can be accessed on computers and other commonly found capture software locally and/or remotely. With today’s changing world of virtual attendance, the PACAPT1 can be utilized for virtual learning, podcasts, or record live audio. Convert CDs, cassettes, vinyl records, etc. to an MP3 or digital audio format. Easy to install and connect, the PACAPT1 simply connects analog audio in the form of RCA or 3.5mm connections from an audio source which converts to USB, and can be connected to a computer with the software included. For simply converting analog audio to digital formats, the PACAPT1 is a perfect solution.

Transmitter/Receiver w/Bluetooth 4.1 Wireless Technology

The Pulse Audio PABT410 Bluetooth 4.1 Transmitter & Receiver, is designed for audio components that do not feature Bluetooth functionality. This unit can be used as a Transmitter to send audio via Bluetooth, or as a Receiver to accept Bluetooth signals. The PABT410 includes both analog and digital connections with 3.5mm and SPDIF connections for inputs and outputs. Also features an auto search for components to connect to. The integrated fast charging battery within the PABT410 even allows for use without a power supply being connected, great for mobile use. The PABT410 transmitter/receiver is a great solution to bring Bluetooth 4.1 connectivity to any audio product!

Transmitter/Receiver w/Bluetooth 1.0 Wireless Technology

Note: This product has been discontinued.

2 Channel 300W Class D Amplifier

The PA2X amplifier series from PulseAudio are an ideal solution for residential and commercial audio installations that require a simple setup and great sound output. With a small footprint, but high output, these Class D amplifiers can sit on a desktop, or can easily be mounted on a wall or within a rack using the included mounting brackets. The amps can be used in a stereo system, but can also be switched for use in bridged or mono applications. The inputs consist of two stereo audio inputs, two RCA inputs, and a single 3.5mm input for versatility. Also includes an auto-ON feature so the units do not need to be powered manually, just hit play and the amps will power on automatically! With a broad range of power output to pick from, the Pulse Audio PA2X amplifier series are a great solution for any desired application.

2 Channel 250W Class D Amplifier

The PA2X amplifier series from PulseAudio are an ideal solution for residential and commercial audio installations that require a simple setup and great sound output. With a small footprint, but high output, these Class D amplifiers can sit on a desktop, or can easily be mounted on a wall or within a rack using the included mounting brackets. The amps can be used in a stereo system, but can also be switched for use in bridged or mono applications. The inputs consist of two stereo audio inputs, two RCA inputs, and a single 3.5mm input for versatility. Also includes an auto-ON feature so the units do not need to be powered manually, just hit play and the amps will power on automatically! With a broad range of power output to pick from, the Pulse Audio PA2X amplifier series are a great solution for any desired application.

2 Channel 50W Class D Amplifier

The PA2X amplifier series from PulseAudio are an ideal solution for residential and commercial audio installations that require a simple setup and great sound output. With a small footprint, but high output, these Class D amplifiers can sit on a desktop, or can easily be mounted on a wall or within a rack using the included mounting brackets. The amps can be used in a stereo system, but can also be switched for use in bridged or mono applications. The inputs consist of two stereo audio inputs, two RCA inputs, and a single 3.5mm input for versatility. Also includes an auto-ON feature so the units do not need to be powered manually, just hit play and the amps will power on automatically! With a broad range of power output to pick from, the Pulse Audio PA2X amplifier series are a great solution for any desired application.