Shop
Networking
Bulk Wire & Cable
Cables
Racks & Enclosures
Tools
Audio/Video/Home
HDMI
Mounts
Security
Adapters
Usb/Mobile/Tablet
Electrical
Technical Furniture
Shop Brands
FireFold
ICC
Intellinet Network Solutions
Jonard Tools
j5create
Kendall Howard
Netstrand
Paige Electric
Platinum Tools
Quest
Rhino Brackets
SimplyBrands
Structured Cable Products
Vanco
Vertical Cable
Wavenet
World Cord Sets
View All
About Us
Customer Service
Returns
Order Status
Shipping Policy
Customer Reviews
Contact Us
70497971000
Support@FireFold.com
Free Shipping on Orders > $99.99 - *Some Exclusions May Apply
Filter
10% offat checkout
PulseAudio In-Wall 30W 2 Channel Addressable Bluetooth Amplifier
The PulseAudio PA230BWA is an in-wall addressable Bluetooth audio receiver with a built in 2x30W amplifier in a single gang wall plate form factor, that creates a simple distributed audio system to stream music over Bluetooth. Equipped with a Class D, 60 watt in-wall power amplifier that supports 4 Ohm and 8 ohm speakers. Features two ways of connectivity including a stereo input (3.5mm jack), and Bluetooth 5.0 for a wireless connection. Automatically switches sources with the priority for Bluetooth connectivity. Install in one zone with the ability to install multiple units in one building, as each unit can be uniquely addressable. Connect the PA230BWA to a computer to address the ID and password to allow for multiple and unique amplifiers on the same site without issue! For an amplified 2-channel setup that is simple to operate with a clean look, the PA230BWA is a great solution to play and control music from your phone, tablet, or computer to an amplified single zone.
$266.99
PulseAudio 4 Pair Stereo Speaker Selector Box
The PulseAudio PA-SS4 Speaker Selector is a low profile speaker selector unit that allows for distribution of high level (amplified) stereo signals into multiple zones. The PulseAudio PA-SS4 features a manually activated impedance protection circuit that can be activated to prevent the impedance to a receiver, this protection keeps the receiver from dropping below 5 Ohms, regardless of the impedance rating of the speakers utilized. The impedance protection can also be de-activated, allowing for part of a planned system of impedance with matching volume controls. The result is great sound quality in every zone.
$94.99
PulseAudio PA2X60 2 Channel 120W Class D Amplifier
The PA2X amplifier series from PulseAudio are an ideal solution for residential and commercial audio installations that require a simple setup and great sound output. With a small footprint, but high output, these Class D amplifiers can sit on a desktop, or can easily be mounted on a wall or within a rack using the included mounting brackets. The amps can be used in a stereo system, but can also be switched for use in bridged or mono applications. The inputs consist of two stereo audio inputs, two RCA inputs, and a single 3.5mm input for versatility. Also includes an auto-ON feature so the units do not need to be powered manually, just hit play and the amps will power on automatically! With a broad range of power output to pick from, the Pulse Audio PA2X amplifier series are a great solution for any desired application.
$386.99
PulseAudio In Wall Wifi Streaming Amplifier 2x30w
The PulseAudio PA230SWA is an in-wall streaming audio receiver with a built in 2x30W amplifier in a single gang wall plate form factor, that creates a simple distributed audio system to stream music over a wireless internet connection. Install in one zone or multiple zones, a great solution to stream music and create a wireless distributed audio system, all while using the easy to use and intuitive PASTREAM app! Play and control music, downloaded or streamed from your phone, tablet, or computer. The PA230SWA is compatible with Airplay, and Wi-Fi Direct that are found within the same network, allowing for songs to be shared easily in a distributed audio system. In addition, a mobile app is available on iOS and Google Play marketplaces, and allows the end user to sync their Spotify, Amazon Music, Qplay, TuneIn, iHeartRadio, and Tidal accounts for an effortless and enhanced listening experience. Multiple PA230SWA amplifiers can be used within the same systems allowing everyone to listen to their own music and playlists or join multiple units together for a party mode!
$348.99
PulseAudio PAV140 Single Channel 40w 70/100 Volt Amplifier w/Mic Input
The PulseAudio PAV140 is an amplifier that produces 40 Watts with Class-D power that is able to output 70V or 100V. Features two stereo inputs (3.5mm jack for line in and (2) RCA for L&R), one digital input and one balanced MIC input, with integrated ducking functionality, EQ control, and MIC mixing. The MIC input supports three levels with condenser MIC, dynamic MIC and line level audio input. The single output channel supports up to 40W @8ohms and is able to be controlled manually, as well as with IR and RS232. Can be combined with multiple amplifiers within a system, with the ability of controlling each zone individually. The PAV140 is a great solution for any 70v/100v speaker application
$574.99
PulseAudio Digital Optical Audio 3x1 Switch with IR
The PulseAudio PA-SW31T digital optical audio switcher allows for up to three SPDIF/ TOSLINK digital audio sources to be selected to play to a device with a SPDIF/TOSLINK digital audio optical input. Inputs can be selected with the provided IR remote, or with a 3rd party universal remote for easy and flexible control.
$64.99
PulseAudio PA-EXTDA Digital-Analog Audio Extender
The PulseAudio PA-EXTDA is a digital-analog audio extender over a single Cat5e/6. It is designed to extend the analog audio signals up to 170m, or digital audio signal up to 290m via toslink or coax audio input. Selecting the audio source is quick and easy with the use of a toggle switch. The toslink, coax, and RCA audio outputs are all synchronized and can be used simultaneously to provide digital and analog audio to 3 different audio devices at the same time without any lag between audio formats. With POC technology, the transmitter can be powered by the receiver for a for quick and easy installation.
$269.99
PulseAudio Collaboration Video Bar USB 3.0 4K@60Hz
The PulseAudio PA-CVB1 Collaboration Video Bar is an all-in-one, compact design with crystal clear audio with 4K video, perfect for any conference room type application. Advanced AI algorithms allow for multiple framing technologies such as facial detection, sound positioning, and voice tracking to automatically frame meeting participants and adjust focus to always present the best view. Built-in 6-mic array voice tracks and zooms camera to any person who is speaking. Plug-and-play USB 3.0 connectivity, along with a 3.5mm stereo audio input allows for quick and seamless integration to any video conferencing equipment or software anywhere, and anytime! A truly ideal solution for all small and medium-sized collaboration spaces.
$1,236.99
PulseAudio Single Channel 100w 70/100 Volt Amplifier w/Mic Input
The PulseAudio PAV1100 is a 100 Watt Class-D power amplifier with output alternatively at 70V or 100V. Featuring stereo inputs (a 3.5mm jack for linein and two RCA for L&R audio), one digital input and a balanced MIC input. Also features mic ducking functionality, EQ control, and mic mixing. The mic input supports three levels with condenser MIC, dynamic MIC & line level audio input. The single output channel supports up to 100W and is able to be controlled manually, as well as with RS232 and IR using the PAV140-IR (sold separately). Multiple PAV1100 amplifiers can be used, and can be addressed with different IDs to ensure each zone is able to be controlled individually. The PAV1100 is a perfect plug and play solution for any 70v/100v speaker application.
$984.99
PulseAudio Keypads/Remote/Hub for PA66MK2
$886.99
PulseAudio 6x6 Audio Distribution Amplifier
The PA66MK2 is a functional, easy-to-install, highly compatible, expandable, and user-friendly audio distribution system. It provides up to 25W @ 8 Ohm Power by Class D amplifier to up to 18 zones which at can be controlled by keypads (sold separately as PA66ACCS), RS232, IR, or via IP with provided RS232-IP and iOS and Android apps. Overall the distribution system is easy-to install, so every audiophile can enjoy the powerful audio wherever they are.
$2,056.99
PulseAudio Balanced/Unbalanced Microphone Preamp
The PulseAudio PA-MICPRE is a microphone preamplifier that provides a small, simple, and easy-to-use microphone pre-amplification solution for a variety of applications. Featuring both balanced XLR and unbalanced 1/4” inputs and outputs, along with a single gain control with a clipping indicator. The 1/4” output is uniquely designed for use as a mono unbalanced output, or a stereo headphone output. A phantom power option is provided for use with condenser microphones. For any applications requiring a microphone to be added, the PA-MICPRE is a great solution that is simple and easy to use!
$164.99
PulseAudio Two Source, Four Pair Stereo Speaker Select Box with Volume Control
$418.99
PulseAudio PABT410 Transmitter/Receiver w/Bluetooth 4.1 Wireless Technology
The Pulse Audio PABT410 Bluetooth 4.1 Transmitter & Receiver, is designed for audio components that do not feature Bluetooth functionality. This unit can be used as a Transmitter to send audio via Bluetooth, or as a Receiver to accept Bluetooth signals. The PABT410 includes both analog and digital connections with 3.5mm and SPDIF connections for inputs and outputs. Also features an auto search for components to connect to. The integrated fast charging battery within the PABT410 even allows for use without a power supply being connected, great for mobile use. The PABT410 transmitter/receiver is a great solution to bring Bluetooth 4.1 connectivity to any audio product!
$146.99
PulseAudio PA2X150 2 Channel 300W Class D Amplifier
$983.99
PulseAudio PA2X125 2 Channel 250W Class D Amplifier
$738.99
PulseAudio PA2X25 2 Channel 50W Class D Amplifier
$173.99
×
×