All

The visual fault locator (VFL) is an essential tool that quickly and easily locates problem areas in fiber cables. By pinpointing the exact location of fiber damage, technicians can diagnose, troubleshoot, and fix the problem efficiently.

Applications

• Locate sharp bends, breaks, and damages in fiber
• Conduct end-to-end continuity tests
• Perform fiber tracing and identification

Dual Range High Voltage Tester

The Dual-Range Non-Contact Tester checks for the presence of voltage in overhead conductors or finds faults in cables. The LOW range detects 50V AC to 1.5kV AC. The HIGH range detects 1.5kV AC to 132kV AC. The tester indicates the presence of voltage with both audible and visual signals.

Universal Fiber Optic Cleaning Cassette for MPO, MTP, SC, ST, FC, LC, MU Connectors

The Optix America universal fiber optic connector cleaning cassette is designed for compatibility with all major connector types, including MPO, MTP, SC, ST, FC, LC, and MU. Each cassette delivers over 500 cleaning cycles, ensuring long lasting performance in the field. Its densely woven microfiber cleaning ribbon rotates 180° with each use, providing a full sweep of the connector end face and achieving cleanliness levels of 97% or higher. The cassette also features excellent anti-static properties to help prevent dust from reattaching to the ferrule after cleaning.

1.25mm Cleaning Stick for LC, MU connector end face (50 pack)

Optix America Cleaning Sticks are reliable, cost effective tools engineered for the critical cleaning of fiber optic connector end faces. Featuring a dry, alcohol-free cloth tip, these sticks can be used alone or with cleaning fluid to thoroughly clean the entire end face. Precision-molded to exact specifications, they are available for both 2.5mm (SC, ST, FC) and 1.25mm (LC,MU) connectors. These color-coded sticks provide high-purity cleaning without the use of fabrics, foam, glues, or particulates. They are ideal for cleaning ferrule end faces in tight spaces, such as patch panels and adapters, as well as contact areas within high-speed fiber optic network receptacles.

2.5mm Cleaning Stick for SC, ST, FC Connector End Face (50 pack)

Optix America Cleaning Sticks are reliable, cost effective tools engineered for the critical cleaning of fiber optic connector end faces. Featuring a dry, alcohol-free cloth tip, these sticks can be used alone or with cleaning fluid to thoroughly clean the entire end face. Precision-molded to exact specifications, they are available for both 2.5mm (SC, ST, FC) and 1.25mm (LC,MU) connectors. These color-coded sticks provide high-purity cleaning without the use of fabrics, foam, glues, or particulates. They are ideal for cleaning ferrule end faces in tight spaces, such as patch panels and adapters, as well as contact areas within high-speed fiber optic network receptacles.

2"x 2" Lint Free, Non-abrasive Fiber Optic Wipes - 150 Pack

Our lint-free, non-abrasive wipes provide superior cleaning for optical surfaces, fiber cables, and connector end faces without the risk of scratching or leaving residue. Made from a high-strength 45/55 cellulose/polyester blend, these hydro-entangled dry wipes offer excellent absorbency and contamination entrapment. They are available in a standard 4"x4" size (100 per pack) or an economical 2"x2" size (150 per pack).

4"x 4" Lint Free, Non-abrasive Fiber Optic Wipes - 100 Pack

Our lint-free, non-abrasive wipes provide superior cleaning for optical surfaces, fiber cables, and connector end faces without the risk of scratching or leaving residue. Made from a high-strength 45/55 cellulose/polyester blend, these hydro-entangled dry wipes offer excellent absorbency and contamination entrapment. They are available in a standard 4"x4" size (100 per pack) or an economical 2"x2" size (150 per pack).

Splicer V-Groove Cleaning Kit

Dust, dirt, and fiber coating debris will eventually find their way to the surface of the fusion spicer v-groove and this contamination will offset the fibers and degrade performance. To solve these cleaning needs, Optix America has combined its recommended fusion splicer v-groove cleaning products into a single kit for effortless convenience. This kit includes the highest quality tools into an affordable and effective inspection and cleaning solution for any fusion splicer. The specialized v-groove cleaning pen offers bristles that can be extended to the optimal length and hardness simply by twisting the cap and spent bristles can be cut off for fresh ones.

Fiber Optic Connector Cleaning Kit

The Optix America Fiber Optic Connector Cleaning Kit is a comprehensive, field-ready solution designed to ensure optimal performance and reliability of fiber optic networks. Engineered for technicians and installers, this all-in-one kit provides the essential tools required to effectively clean and inspect LC, SC, ST, and FC connector endfaces. By removing dust, oil, and other contaminants, the kit helps reduce signal loss, prevent damage, and maintain peak network efficiency. Built for convenience and precision, the kit includes a high-magnification handheld fiber microscope, a high-capacity cleaning cassette, multiple cleaning pens and sticks for different connector sizes, and lint-free wipes paired with cleaning fluid for thorough endface preparation. Housed in a durable soft case for easy transport and organization, the Optix America cleaning kit is an indispensable solution for both field service and installation environments

Fiber Optic Inspection Probe Kit

The OPTIX America FIP-82 handheld fiber optic inspection probe is a portable video microscope used to examine installed fiber terminations and verify that they are smooth and clean. With the appropriate adapters, it can inspect virtually any type of fiber optic termination. This kit includes six precision adapter tips for multimode and singlemode fiber end-face analysis, which attach easily to the end of the probe. Additional adapter tips are available for other termination types. The monitor provides a 3.5" high-precision LCD display that delivers real-time, high-resolution images of the connector end face at 250x magnification with no latency. The monitor and probe feature intuitive controls for image focus, brightness level and battery indicator. A protective elastomeric shell surrounds the monitor to guard against drops.

WiFi Inspection Probe with Rechargeable Battery

The Optix America WiFi Fiber Optic Inspection Probe is a portable inspection system that pairs seamlessly with iOS and Android smart devices, enabling fast and accurate analysis of fiber optic connector end-face cleanliness. With a single press of a button, the probe captures, centers, and evaluates the end-face image based on user-defined criteria, streamlining the inspection process. Equipped with a high-definition CCD camera and precision optics, the probe delivers sharp, detailed images directly to a mobile device. Users can magnify images up to 200×, capture photos, and record inspection results for documentation and analysis. The system includes six interchangeable adapter tips to support a wide range of fiber inspection applications. Additional optional tips are available, including configurations for MPO/APC female and MPO/UPC female connectors.The WIFI-P8 inspection kit comes complete with a WiFi-enabled inspection probe featuring a rechargeable battery, six precision adapter tips, power adapter, user guide, and a protective soft carrying case.

Wet/Dry QuickCleans2

Fiber Optic Wet/Dry QuickCleans2 offer a faster way to clean fiber cables while protecting technicians from skin irritation caused by repeated exposure to isopropyl alcohol (IPA) and other agents. The QuickCleans2 utilizes a spring loaded tweezer style design that makes cleaning fiber simple and fast. The cleaning pads are made from a non-woven, high-density, hydro-entangled 45/55 cellulose/polyester blend, ensuring optimal purity and excellent absorbency. Each pad is designed to last a minimum of 200 uses.The QuickCleans2 package includes a fiber cleaning tool, ten cleaning pads, and a 50ml fluid dispenser bottle.

Fiber Optic Wet/Dry QuickCleans - 10 Pack

The OPTIX Fiber Optic Wet/Dry QuickCleans offer a faster way to clean fiber cables while protecting technicians from skin irritation caused by repeated exposure to isopropyl alcohol (IPA) and other agents. The tweezer-style design features lint-free pads for superior cleaning and a loop tie-down to prevent loss. Made from a high-density cellulose/polyester blend for maximum purity, these tools are compatible with any professional fluid pump dispenser. Each QuickClean is highly absorbent and tested for over 100 uses. QuickCleans are available in packages of ten.

10mW Visual Fault Locator, Battery Operated

The Optix VFL-10 is a 10mW visual fault locator equipped with a 650nm visible laser diode that delivers clear and precise fault location while supporting both continuous wave (CW) and 2Hz modulation modes for versatile operation. Its rugged construction features a reinforced end design to protect the laser tip from damage if dropped, ensuring long-term durability. The device maintains stable power output even under low battery conditions for consistent performance in the field. It includes a 2.5mm universal adapter compatible with SC, FC, and ST connectors, along with a 1.25mm LC/MU adapter for added flexibility. A soft carrying case is provided for easy transport and storage, while a protective dust cap offers additional safeguarding of the laser interface.

10mW Visual Fault Locator, Rechargeable Li-ion Battery

The OPTIX Visual Fault Locator features a rechargeable 700mAh Li-ion battery and delivers a 10mW power output using a 650nm visible laser diode. It supports both continuous wave (CW) and 2Hz modulation modes, ensuring versatile operation, while maintaining stable power output even at low battery levels. The unit is equipped with a 2.5mm universal adapter and includes an additional 1.25mm adapter. A USB-C charger is provided for convenient recharging. It is built with a specially designed end to help prevent damage to the laser, along with a protective cap for added durability.

Visual Fault Locator for MPO Fiber

As demand for MPO fiber optic cabling continues to grow, OPTIX America is proud to introduce the MPO Visual Fault Locator — an essential troubleshooting tool for continuity verification and macro-bend detection in MPO optical systems. Rugged, weather-resistant, and shock-resistant, this unit delivers 10mW of output power and is available in 12,16, or 24 channel configurations. Transition cables are also available in 24 to 16, 24 to 12, and 16 to12 fiber configurations, ensuring compatibility across a range of setups. The MPO Visual Fault Locator works with both singlemode and multimode fiber and is powered by a rechargeable 5V lithium battery with USB Type-C charging for fast, convenient charging in the field.

Mini Optical Fiber Identifier for 250µm, 900µm, 2mm, and 3mm

The OPTIX America mini optical fiber identifier features a compact, convenient design ideal for field use. It accurately detects attenuation, signal direction, and approximate optical power through macrobending measurement on 250µm, 900µm, 2mm, and 3mm diameter fiber cables. The unit supports tone identification at fixed frequencies of 270Hz, 1kHz, and 2 kHz, and detects both the direction and intensity of optical signals with insertion loss of less than 1dB at 1310nm and 1550nm. A bell-shaped groove fiber clamp ensures low insertion loss while preventing damage to the fiber. The identifier is powered by a built-in 500mAh lithium battery that provides up to 24 hours of operation and recharges conveniently via a Type-C interface. A universal adapter accommodates multiple fiber diameters without the need to change blocks, and the unit is supplied with a protective soft carrying case.

Optical Fiber Identifier

The Optix America OFI-28 Optical Fiber Identifier with integrated VFL and Optical Power Meter utilizes advanced macro-bending technology to perform non-destructive live fiber detection. It enables users to identify signal presence, direction, and relative power levels at any point along singlemode or multimode fibers, supporting cable diameters of 250µm, 900µm, 2mm, and 3mm. The universal adapter design accommodates multiple fiber sizes without the need to change clamp blocks, improving efficiency in the field.

Equipped with a built-in 10mW Visual Fault Locator (VFL) and optical power meter, the OFI-28 allows for quick fault location and accurate optical power measurement on the tested fiber. Additionally, the unit features a low battery monitoring function that alerts users when battery replacement is required, ensuring reliable operation during critical tasks.

SM+MM Optical Light Source

The WRX281 Optical Light Source is a precision fiber optic test instrument designed for fiber link continuity verification, fault diagnosis, and insertion loss testing. Supporting multimode and singlemode operation at 850nm, 1300nm, 1310nm, and 1550nm wavelengths, it features adjustable optical output power up to 6 dB, continuous wave and modulated output modes, automatic power-off, wavelength memory, and a backlit LCD display. Powered by a 1500 mAh rechargeable lithium battery, it provides up to 24 hours of operation and includes a universal 2.5 mm interface with a 1.25 mm adapter. When used with the WRX280 Optical Power Meter, it enables accurate bidirectional loss and continuity testing of optical fiber links.

Optical Power Meter

The WRX280 Optical Power Meter with integrated 10mW Visual Fault Locator (VFL) and cable tracker is designed for continuous optical signal power measurement, fiber optic link loss testing, and fiber continuity verification. Controlled by a single-chip processor, it supports measurements at 10 standard wavelengths and provides frequency recognition, wavelength recognition, user calibration, wavelength memory, automatic shutdown, and backlight display functions. The built-in 10mW VFL offers CW, 1Hz, and 2Hz operating modes for efficient fiber identification and troubleshooting. The unit features a rechargeable 700mAh lithium battery for extended operation and includes a universal 2.5mm SC/ST/FC interface, along with a 1.25mm LC adapter for added versatility.

OLTS Fiber Test Kit

The OPTIX Fiber Link Test Kit is the comprehensive, all-in-one solution for testing and qualifying optical links, as well as verifying fiber cables before deployment. Combining an Optical Power Meter and Optical Light Source, it enables fast, accurate troubleshooting of both single-mode and multimode fibers across four key wavelengths - 850, 1300, 1310, and 1550 nm. It simplifies optical power loss measurements and supports storage of up to 500 test records with seamless PC software export. The complete kit includes SC and LC adapters, reference cords, bare fiber adapters, a scribe tool, a visual fault locator, connector cleaning pens, and a rugged carrying case - ensuring reliable and efficient field testing.

WRX1000H Handheld OTDR Singlemode

The WRX1000H series handheld optical time domain reflectometer (OTDR) offers precise measurement of fiber length, splice loss, and the location of fiber faults. It features a 3.5-inch capacitive touch screen and integrates multiple functions, including OTDR, event map, OPM, LS, VFL, RJ45 sequence test, optical loss test, and flashlight. The touchscreen allows for simple and efficient operation through single parameter setting and intelligent measurement. Key specifications of the WRX1000H include a dynamic range of 24dB or 22dB, an event dead zone of less than 2.5m, and an attenuation dead zone of less than 8.0m, ensuring accuracy and reliability in field use. With a high sampling rate of 128k, it can detect defects as small as 1 meter. It supports external USB storage, capable of storing up to 1000 test curves, and is equipped with a 4000mAh high-density lithium battery that provides up to ten hours of testing time and twenty hours of standby time with intelligent power saving management. Additionally, the filter model supports online testing with a maximum online power of -2dB.

WRX3000 OTDR Singlemode

The WRX3000 series optical time domain reflectometer (OTDR) adopts a 4.3 inch capacitive touch screen and integrates twelve functions including auto OTDR, expert OTDR, event map, OPM, RJ45 cable tracker, and “computer level” file management to meet various test requirements. The OTDR has a maximum dynamic range of 26dB, 8G memory, and can store more than 200,000 curves. It is also equipped with a 4000mAh high density polymer lithium battery with intelligent power saving management providing up to twelve hours testing time.

The WRX3000 series is used to measure the length, loss, and connection quality of optical fiber used in engineering construction, line maintenance & testing, emergency repair, and the development and production of optical fiber cables.

WRX5000 OTDR Singlemode + Multimode

The WRX5000 series single mode + multi mode optical time domain reflectometer (OTDR) is the new generation of intelligent tester for the detection of fiber communications systems and optical network construction for outstanding performance and is specially designed for long haul application. This specially designed unit offers a seven inch capacitive touch screen which integrates nine modules. It has excellent accuracy of short fiber test and automatic test and is equipped with a rich ethernet test (Ping/PPOE, etc) and supports APP control. The WRX5000 series is used to measure the length, loss, and connection quality of optical fiber used in engineering construction, line maintenance & testing, emergency repair, and the development and production of optical fiber cables.

MCT-KIT + WRXTS1 Thermal Stripper Professional Mechanical Connector Kit

The Optix America Professional Mechanical Connector Termination Kit combines all the tools needed for stripping, cleaning, and cleaving fiber. It is perfect for the successful termination of field installable mechanical connectors.

Fiber Optic Tool Kit for Mechanical Connectors

The Optix America Basic Mechanical Connector Termination Kit combines all the tools needed for stripping, cleaning, and cleaving fiber. It is perfect for the successful termination of field installable mechanical connectors.

Platinum Tools Wireless Fiber Optic Inspection Scope

The PT-SCOPE-200 provides a solution for endface inspection and reporting to ensure fiber optic connectors are up to the correct cleanliness standards. With the 200X magnification, dirt and debris are easily identifiable and the integrated application will provide testing zones to show pass/fail results. Includes a slim carrying case for easy transport and most common connector endface adapters.

PERFECT FOR INSTALLERS
Ideal for technicians and installers working on fiber optic cable terminations.

VERSATILE AND RELIABLE
Perfect for fieldwork, datacenters, and telecom applications

Applications

• 5G fiber network installation and maintenance
  
• Data center inspections
  
• High-reliability fiber connection validation
  
• R&D and manufacturing environments

Mini OTDR/Copper Tester (1310/1550nm)

The PT-OTDR-100 mini OTDR tester provides a simple to setup and easy to use solution for OTDR testing. Includes a 5.5 inch OLED touch screen for easy viewing of cable tests and can save and export your OTDR tests. This unit will perform OTDR tests, OPM, VFL and laser source functionality for fiber optic cable, and will also perform continuity testing and TDR for Category cable

MULTI-FUNCTIONAL TESTING

Multiple tests offered for both Fiber and Copper testing

COMPACT FORM FACTOR

Ruggedized form factor with a 4-6hr battery life, or charge on the go!

ACTIVE NETWORK TESTING

LLDP, PPPoE, IP Scan, & Ping testing all-in-one.

ACCESSIBLE PRICING

Priced to supply every truck and technician.

ST-158006 – PoE PRO Data Cable and PoE Verifier

The new PoE Pro eliminates guesswork when installing, maintaining, and troubleshooting networks where PoE is deployed. Previously technicians had to understand all the various standards, device power outputs, and cable lengths to be sure a device will operate successfully. The PoE Pro identifies the Class of the PoE source and power available to a PoE device regardless of cable length, cable quality, or other factors.

The VDV II Series are easy to use cable testers that check the integrity of copper cables commonly found in domestic, commercial or industrial voice, data or video installations, including telephone wiring, data network and video/security cabling.

Employing state-of-the-art technology, VDV II offers functionality not previously available in a wiremapper. The advanced wiremap engine accurately displays complex wiring faults instantaneously while TDR (Time Domain Reflectometry) aids troubleshooting and improves on-site productivity.

ST-VFF5 – VISUAL FAULT FINDER

The Visual Fault Finder is a visible laser light source used to check continuity, locate breaks, poor mechanical splices and damaged connectors in fiber optic cabling.

Used to verify continuity, test and find breaks in fiber links, locate pinched fiber strands in termination cabinets, or anywhere fiber optic cables are terminated and subject to mechanical damage.

The VFF5 is also an excellent aide to technicians terminating mechanical splices or pre-polished connectors where leaking light is an indicator of a poor fiber cleave or other misalignment.

ST-R301HOLDERKIT – 3 x 250um, 2 x 900um fiber holders

SimplyTEST™ – Fiber Holder Kit: Precision & Speed for Splicing – 5 x 250um, 2 x 900um fiber holders

Maximize your splicing efficiency and consistency with the Fiber Holder Kit. Designed for seamless integration with your cleavers and fusion splicers, these holders ensure perfect fiber placement every time.

ST-R301BATTS60 – FiberMASTER S60 Battery

SimplyTEST™ Replacement battery continuous splicing with FiberMASTER S60

Maximize your uptime and productivity with the ST-R301BATTS60 Li-ion battery for your FiberMASTER S60 fusion splicer. Engineered for extended use and ultimate flexibility, it ensures your work never stops.

SimplyTEST™ – Replacement Battery Power for FiberMASTER S4

Ensure uninterrupted performance for your FiberMASTER S40 fusion splicer with the R301-BATT-S40 Li-ion battery. Designed for long-lasting power and flexibility, it keeps your splicing operations running smoothly.

ST-R240VIPSCA – FiberMASTER Video Inspection Probe Tip – SC/APC

FiberMASTER Video Inspection Probe Tip – SC/APC

ST-R240VIPSC – FiberMASTER Video Inspection Probe Tip – SC

FiberMASTER Video Inspection Probe Tip – SC

ST-R240VIPLCA – FiberMASTER Video Inspection Probe Tip – LC/APC

LC/APC port/bulkhead tip for FiberMASTER Video Inspection Probe

ST-R240VIPLC – FiberMASTER Video Inspection Probe Tip – LC

FiberMASTER Video Inspection Probe Tip – LC

ST-R240VIP250UA – FiberMASTER Video Inspection Probe Tip – 2.5mm APC

2.5mm/APC universal port/bulkhead tip for FiberMASTER Video Inspection Probe

ST-R240VIP250U – FiberMASTER Video Inspection Probe Tip – 2.5mm

FiberMASTER Video Inspection Probe Tip – 2.5mm

ST-R240VIP125UA – FiberMASTER Video Inspection Probe Tip – 1.25mm APC

1.25mm/APC universal port/bulkhead tip for FiberMASTER Video Inspection Probe

ST-R240VIP125U – FiberMASTER Video Inspection Probe Tip – 1.25mm

FiberMASTER Video Inspection Probe Tip – 1.25mm

ST-R240VIP – FiberMASTER Video Inspection Probe

FiberMASTER Video Inspection Probe

ST-R240SIPV – FiberMASTER Single-mode OTDR

FiberMASTER Single-mode OTDR (1310/1550) with SC connector, Inspection port, Power meter

Test, Troubleshoot and Certify cabling faster with the FiberMASTER OTDR.

The FiberMASTER OTDR is available in 4 options, Quad, multimode, singlemode and PON.

The OTDRs feature both high dynamic range and small dead zones providing the precision required for installation and troubleshooting alike. The software simplifies certification of cabling to meet TIA/ISO/IEC/IEEE requirements with simple pass/fail results. Additionally custom test parameters are easily set to accommodate any application.

OTDRs can be complicated to configure and achieve accurate results. FiberMASTER automates testing and steps you through the process as shown below.

For FTTx/FTTH applications the PON OTDR identifies split ratios for easy testing and troubleshooting of inactive and active networks. The 1625nm wavelength allows in-service testing of networks without interrupting existing subscribers.

Why do I need a FiberMASTER?

It depends how important speed and accuracy are to you.

FiberMASTER – size, simplicity and value without compromise, made in the USA, tested in Germany.

The new FiberMASTER series of fiber optic testers will make it easier and faster to verify, troubleshoot and certify fiber optic cabling.
The OTDR, PON OTDR, Power Meter and Light Source, and Inspection Probe will enable cable installers to get the dependable test results needed, while saving thousands of dollars.
As one of the smallest OTDRs in the world you will find them easier to carry and operate while the rubberized housing will protect your investment. The simplified setup options makes them easy to use, saving you time on training and reducing the likelihood of errors.

Our New York Research and Development center of excellence has over 30 years experience designing OTDRs providing you with the most advanced, compact optical test systems available.

ST-R240QIP – FiberMASTER Quad OTDR

FiberMASTER Quad OTDR (850/1300/1310/1550) with SC connectors, Inspection port, Power meter

Test, Troubleshoot and Certify cabling faster with the FiberMASTER OTDR.

The FiberMASTER OTDR is available in 4 options, Quad, multimode, singlemode and PON.

The OTDRs feature both high dynamic range and small dead zones providing the precision required for installation and troubleshooting alike. The software simplifies certification of cabling to meet TIA/ISO/IEC/IEEE requirements with simple pass/fail results. Additionally custom test parameters are easily set to accommodate any application.

OTDRs can be complicated to configure and achieve accurate results. FiberMASTER automates testing and steps you through the process as shown below.

For FTTx/FTTH applications the PON OTDR identifies split ratios for easy testing and troubleshooting of inactive and active networks. The 1625nm wavelength allows in-service testing of networks without interrupting existing subscribers.

Why do I need a FiberMASTER?

It depends how important speed and accuracy are to you.

FiberMASTER – size, simplicity and value without compromise, made in the USA, tested in Germany.

The new FiberMASTER series of fiber optic testers will make it easier and faster to verify, troubleshoot and certify fiber optic cabling.
The OTDR, PON OTDR, Power Meter and Light Source, and Inspection Probe will enable cable installers to get the dependable test results needed, while saving thousands of dollars.
As one of the smallest OTDRs in the world you will find them easier to carry and operate while the rubberized housing will protect your investment. The simplified setup options makes them easy to use, saving you time on training and reducing the likelihood of errors.

Our New York Research and Development center of excellence has over 30 years experience designing OTDRs providing you with the most advanced, compact optical test systems available.

ST-R240PMLS – FiberMASTER Power Meter and Light Source

FiberMASTER Multimode/single-mode power meter and quad light source kit, with Inspection port, VFL

Test, Troubleshoot and Certify cabling faster with the FiberMASTER OTDR.

The FiberMASTER OTDR is available in 4 options, Quad, multimode, singlemode and PON.

The OTDRs feature both high dynamic range and small dead zones providing the precision required for installation and troubleshooting alike. The software simplifies certification of cabling to meet TIA/ISO/IEC/IEEE requirements with simple pass/fail results. Additionally custom test parameters are easily set to accommodate any application.

OTDRs can be complicated to configure and achieve accurate results. FiberMASTER automates testing and steps you through the process as shown below.

For FTTx/FTTH applications the PON OTDR identifies split ratios for easy testing and troubleshooting of inactive and active networks. The 1625nm wavelength allows in-service testing of networks without interrupting existing subscribers.

Why do I need a FiberMASTER?

It depends how important speed and accuracy are to you.

FiberMASTER – size, simplicity and value without compromise, made in the USA, tested in Germany.

The new FiberMASTER series of fiber optic testers will make it easier and faster to verify, troubleshoot and certify fiber optic cabling.
The OTDR, PON OTDR, Power Meter and Light Source, and Inspection Probe will enable cable installers to get the dependable test results needed, while saving thousands of dollars.
As one of the smallest OTDRs in the world you will find them easier to carry and operate while the rubberized housing will protect your investment. The simplified setup options makes them easy to use, saving you time on training and reducing the likelihood of errors.

Our New York Research and Development center of excellence has over 30 years experience designing OTDRs providing you with the most advanced, compact optical test systems available.

ST-R240PMIV – FiberMASTER MM/SM Power Meter

FiberMASTER Multimode/single-mode power meter with interchangable SC/SC/FC connectors, Inspection port, VFL

ST-R240PIP – FiberMASTER PON OTDR

FiberMASTER PON OTDR (1310/1550/1625) with SC-APC connectors, Inspection port, Power meter

Test, Troubleshoot and Certify cabling faster with the FiberMASTER OTDR.

The FiberMASTER OTDR is available in 4 options, Quad, multimode, singlemode and PON.

The OTDRs feature both high dynamic range and small dead zones providing the precision required for installation and troubleshooting alike. The software simplifies certification of cabling to meet TIA/ISO/IEC/IEEE requirements with simple pass/fail results. Additionally custom test parameters are easily set to accommodate any application.

OTDRs can be complicated to configure and achieve accurate results. FiberMASTER automates testing and steps you through the process as shown below.

For FTTx/FTTH applications the PON OTDR identifies split ratios for easy testing and troubleshooting of inactive and active networks. The 1625nm wavelength allows in-service testing of networks without interrupting existing subscribers.

Why do I need a FiberMASTER?

It depends how important speed and accuracy are to you.

FiberMASTER – size, simplicity and value without compromise, made in the USA, tested in Germany.

The new FiberMASTER series of fiber optic testers will make it easier and faster to verify, troubleshoot and certify fiber optic cabling.
The OTDR, PON OTDR, Power Meter and Light Source, and Inspection Probe will enable cable installers to get the dependable test results needed, while saving thousands of dollars.
As one of the smallest OTDRs in the world you will find them easier to carry and operate while the rubberized housing will protect your investment. The simplified setup options makes them easy to use, saving you time on training and reducing the likelihood of errors.

Our New York Research and Development center of excellence has over 30 years experience designing OTDRs providing you with the most advanced, compact optical test systems available.