Over $500

Jonard Tools Fiber Power Meter & Optical Light Source Kit

This tool kit provides everything you need to measure power and provide a stable light source for fiber optic cable testing.

Jonard Tools Fiber Power Meter With Data Storage

This tool kit provides everything you need to measure power and provide a stable light source for fiber optic cable testing. This kit includes:

• The FPM-55 Fiber Optic Power Meter for measuring wavelengths from 800-1650 nm, with a mere 0.01 dB resolution
  • Measures 6 preset calibrated wavelengths with high precision to determine absolute or relative power
  • Stores up to 1,000 data entries which can be downloaded via USB
  • Includes FC/SC adapters for APC/PC/UPC connectors and an LC adapter for PC/UPC connectors only
• The FLS-55 Fiber Optic Light Source for providing a stable light source at 850/1300 nm for multimode or 1310/1550 nm wavelengths singlemode fiber measurements
  • Has four different modulation outputs (CW, 270 Hz, 1 kHz, 2 kHz) at 1310 nm and 1550 nm wavelengths
  • Includes FC, SC, and LC adapters to directly connect to UPC/PC FC, SC, and LC fiber connectors
• A FREE BAG! The H-22 Rugged Carrying Case with Straps ($35 value)!
• Nylon Carry Case (FPM-55)
• Storage Pouch (FLS-55)
• With both the FPM-55 and FLS-55
  • Instruction Manuals
  • (3) AA Batteries each (required for operation)
  • (2) Cleaning Swabs each
  • FC Adapter, LC Adapter, and SC Adapters

Broad Range Non-Contact Voltage Tester

Klein's Broad-Range High-Voltage Non-Contact Tester detects voltage up to 230kV AC in overhead conductors. The tester indicates the presence of voltage through multiple sensitivity levels with both audible and visual signals. Attach the tester directly to a hot stick or use the universal adapter to attach it to your shotgun.

Basic Fiber Testing Kit

The SSF-TKITE-200 from Cleerline Technology Group is a versatile and user-friendly fiber testing kit designed to support efficient optical link qualification and troubleshooting for both single-mode and multimode fiber networks. This compact and comprehensive solution includes an optical power meter and two optical light sources to provide all the essential tools for accurate testing, power loss calculation, and maintenance of installed fiber.

Enclosed in a rugged carrying case and equipped with various adapters and reference cables, the SSF-TKITE-200 is ideal for field technicians and network installers seeking a reliable and portable solution.

Underground Wire Tracer and Circuit Finder

Perfect for tracing cables up to 7 ft underground, locating breaks, or tracing a circuit back to the breaker; the WCT-700 is an all in one solution for any cable tracing task.

Jonard Tools Ultimate Backpack Fiber Prep Kit

The Jonard Tools TK-199B Ultimate Backpack Fiber Prep Kit provides an array of tools needed to access and prepare a fiber optic cable for termination. It includes a rugged backpack and a variety of tools for multiple applications such as stripping, ringing, cutting, cleaning, and preparation of fiber optic cable. This tool kit is ideal for any fiber optic technician.

Jonard Tools FTTH Prep Kit With PON Power Meter

The Jonard Tools TK-185PON FTTH Prep Kit with PON Power Meter offers cleaning and preparation products for use on 1.25 mm and 2.5 mm connector end-faces and bulkhead adapters.

Jonard Tools FTTH Prep Kit With Power Meter

The Jonard Tools TK-185  FTTH Prep Kit w/ Power Meter offers cleaning and preparation products for use on 1.25 mm and 2.5 mm connector end-faces and bulkhead adapters.

Jonard Tools Fiber Optic Light Source Multimode & Singlemode

Designed to provide 850/1300 nm or 1310/1550 nm wavelengths, this optical light source is the perfect tool for providing a stable light source for multimode or single mode fiber measurements.

Platinum Tools VDV MapMaster 3.0™ Cable Tester

The VDV MapMaster™ 3.0 combines continuity testing, mapping, generating tones, and length measurement functions into a single easy-to-use unit for installation, troubleshooting, and maintenance for telco, network, or coax cable. The back-lit display, glow-in-the-dark keypad, and a built-in flashlight help you to work in the dark. Whether your jobs are commercial or residential, the versatility and added features of the VDV MapMaster 3.0 makes it a best-value cable verifier for the professional installer! 

Fiber Optic Inspection Probe Kit

The OPTIX America FIP-82 handheld fiber optic inspection probe is a portable video microscope used to examine installed fiber terminations and verify that they are smooth and clean. With the appropriate adapters, it can inspect virtually any type of fiber optic termination. This kit includes six precision adapter tips for multimode and singlemode fiber end-face analysis, which attach easily to the end of the probe. Additional adapter tips are available for other termination types. The monitor provides a 3.5" high-precision LCD display that delivers real-time, high-resolution images of the connector end face at 250x magnification with no latency. The monitor and probe feature intuitive controls for image focus, brightness level and battery indicator. A protective elastomeric shell surrounds the monitor to guard against drops.

WiFi Inspection Probe with Rechargeable Battery

The Optix America WiFi Fiber Optic Inspection Probe is a portable inspection system that pairs seamlessly with iOS and Android smart devices, enabling fast and accurate analysis of fiber optic connector end-face cleanliness. With a single press of a button, the probe captures, centers, and evaluates the end-face image based on user-defined criteria, streamlining the inspection process. Equipped with a high-definition CCD camera and precision optics, the probe delivers sharp, detailed images directly to a mobile device. Users can magnify images up to 200×, capture photos, and record inspection results for documentation and analysis. The system includes six interchangeable adapter tips to support a wide range of fiber inspection applications. Additional optional tips are available, including configurations for MPO/APC female and MPO/UPC female connectors.The WIFI-P8 inspection kit comes complete with a WiFi-enabled inspection probe featuring a rechargeable battery, six precision adapter tips, power adapter, user guide, and a protective soft carrying case.

Visual Fault Locator for MPO Fiber

As demand for MPO fiber optic cabling continues to grow, OPTIX America is proud to introduce the MPO Visual Fault Locator — an essential troubleshooting tool for continuity verification and macro-bend detection in MPO optical systems. Rugged, weather-resistant, and shock-resistant, this unit delivers 10mW of output power and is available in 12,16, or 24 channel configurations. Transition cables are also available in 24 to 16, 24 to 12, and 16 to12 fiber configurations, ensuring compatibility across a range of setups. The MPO Visual Fault Locator works with both singlemode and multimode fiber and is powered by a rechargeable 5V lithium battery with USB Type-C charging for fast, convenient charging in the field.

Optical Fiber Identifier

The Optix America OFI-28 Optical Fiber Identifier with integrated VFL and Optical Power Meter utilizes advanced macro-bending technology to perform non-destructive live fiber detection. It enables users to identify signal presence, direction, and relative power levels at any point along singlemode or multimode fibers, supporting cable diameters of 250µm, 900µm, 2mm, and 3mm. The universal adapter design accommodates multiple fiber sizes without the need to change clamp blocks, improving efficiency in the field.

Equipped with a built-in 10mW Visual Fault Locator (VFL) and optical power meter, the OFI-28 allows for quick fault location and accurate optical power measurement on the tested fiber. Additionally, the unit features a low battery monitoring function that alerts users when battery replacement is required, ensuring reliable operation during critical tasks.

SM+MM Optical Light Source

The WRX281 Optical Light Source is a precision fiber optic test instrument designed for fiber link continuity verification, fault diagnosis, and insertion loss testing. Supporting multimode and singlemode operation at 850nm, 1300nm, 1310nm, and 1550nm wavelengths, it features adjustable optical output power up to 6 dB, continuous wave and modulated output modes, automatic power-off, wavelength memory, and a backlit LCD display. Powered by a 1500 mAh rechargeable lithium battery, it provides up to 24 hours of operation and includes a universal 2.5 mm interface with a 1.25 mm adapter. When used with the WRX280 Optical Power Meter, it enables accurate bidirectional loss and continuity testing of optical fiber links.

OLTS Fiber Test Kit

The OPTIX Fiber Link Test Kit is the comprehensive, all-in-one solution for testing and qualifying optical links, as well as verifying fiber cables before deployment. Combining an Optical Power Meter and Optical Light Source, it enables fast, accurate troubleshooting of both single-mode and multimode fibers across four key wavelengths - 850, 1300, 1310, and 1550 nm. It simplifies optical power loss measurements and supports storage of up to 500 test records with seamless PC software export. The complete kit includes SC and LC adapters, reference cords, bare fiber adapters, a scribe tool, a visual fault locator, connector cleaning pens, and a rugged carrying case - ensuring reliable and efficient field testing.

WRX1000H Handheld OTDR Singlemode

The WRX1000H series handheld optical time domain reflectometer (OTDR) offers precise measurement of fiber length, splice loss, and the location of fiber faults. It features a 3.5-inch capacitive touch screen and integrates multiple functions, including OTDR, event map, OPM, LS, VFL, RJ45 sequence test, optical loss test, and flashlight. The touchscreen allows for simple and efficient operation through single parameter setting and intelligent measurement. Key specifications of the WRX1000H include a dynamic range of 24dB or 22dB, an event dead zone of less than 2.5m, and an attenuation dead zone of less than 8.0m, ensuring accuracy and reliability in field use. With a high sampling rate of 128k, it can detect defects as small as 1 meter. It supports external USB storage, capable of storing up to 1000 test curves, and is equipped with a 4000mAh high-density lithium battery that provides up to ten hours of testing time and twenty hours of standby time with intelligent power saving management. Additionally, the filter model supports online testing with a maximum online power of -2dB.

WRX3000 OTDR Singlemode

The WRX3000 series optical time domain reflectometer (OTDR) adopts a 4.3 inch capacitive touch screen and integrates twelve functions including auto OTDR, expert OTDR, event map, OPM, RJ45 cable tracker, and “computer level” file management to meet various test requirements. The OTDR has a maximum dynamic range of 26dB, 8G memory, and can store more than 200,000 curves. It is also equipped with a 4000mAh high density polymer lithium battery with intelligent power saving management providing up to twelve hours testing time.

The WRX3000 series is used to measure the length, loss, and connection quality of optical fiber used in engineering construction, line maintenance & testing, emergency repair, and the development and production of optical fiber cables.

WRX5000 OTDR Singlemode + Multimode

The WRX5000 series single mode + multi mode optical time domain reflectometer (OTDR) is the new generation of intelligent tester for the detection of fiber communications systems and optical network construction for outstanding performance and is specially designed for long haul application. This specially designed unit offers a seven inch capacitive touch screen which integrates nine modules. It has excellent accuracy of short fiber test and automatic test and is equipped with a rich ethernet test (Ping/PPOE, etc) and supports APP control. The WRX5000 series is used to measure the length, loss, and connection quality of optical fiber used in engineering construction, line maintenance & testing, emergency repair, and the development and production of optical fiber cables.

MCT-KIT + WRXTS1 Thermal Stripper Professional Mechanical Connector Kit

The Optix America Professional Mechanical Connector Termination Kit combines all the tools needed for stripping, cleaning, and cleaving fiber. It is perfect for the successful termination of field installable mechanical connectors.

Fiber Optic Tool Kit for Mechanical Connectors

The Optix America Basic Mechanical Connector Termination Kit combines all the tools needed for stripping, cleaning, and cleaving fiber. It is perfect for the successful termination of field installable mechanical connectors.

Platinum Tools Wireless Fiber Optic Inspection Scope

The PT-SCOPE-200 provides a solution for endface inspection and reporting to ensure fiber optic connectors are up to the correct cleanliness standards. With the 200X magnification, dirt and debris are easily identifiable and the integrated application will provide testing zones to show pass/fail results. Includes a slim carrying case for easy transport and most common connector endface adapters.

PERFECT FOR INSTALLERS
Ideal for technicians and installers working on fiber optic cable terminations.

VERSATILE AND RELIABLE
Perfect for fieldwork, datacenters, and telecom applications

Applications

• 5G fiber network installation and maintenance
  
• Data center inspections
  
• High-reliability fiber connection validation
  
• R&D and manufacturing environments

Mini OTDR/Copper Tester (1310/1550nm)

The PT-OTDR-100 mini OTDR tester provides a simple to setup and easy to use solution for OTDR testing. Includes a 5.5 inch OLED touch screen for easy viewing of cable tests and can save and export your OTDR tests. This unit will perform OTDR tests, OPM, VFL and laser source functionality for fiber optic cable, and will also perform continuity testing and TDR for Category cable

MULTI-FUNCTIONAL TESTING

Multiple tests offered for both Fiber and Copper testing

COMPACT FORM FACTOR

Ruggedized form factor with a 4-6hr battery life, or charge on the go!

ACTIVE NETWORK TESTING

LLDP, PPPoE, IP Scan, & Ping testing all-in-one.

ACCESSIBLE PRICING

Priced to supply every truck and technician.

ST-158006 – PoE PRO Data Cable and PoE Verifier

The new PoE Pro eliminates guesswork when installing, maintaining, and troubleshooting networks where PoE is deployed. Previously technicians had to understand all the various standards, device power outputs, and cable lengths to be sure a device will operate successfully. The PoE Pro identifies the Class of the PoE source and power available to a PoE device regardless of cable length, cable quality, or other factors.

The VDV II Series are easy to use cable testers that check the integrity of copper cables commonly found in domestic, commercial or industrial voice, data or video installations, including telephone wiring, data network and video/security cabling.

Employing state-of-the-art technology, VDV II offers functionality not previously available in a wiremapper. The advanced wiremap engine accurately displays complex wiring faults instantaneously while TDR (Time Domain Reflectometry) aids troubleshooting and improves on-site productivity.

ST-R301HOLDERKIT – 3 x 250um, 2 x 900um fiber holders

SimplyTEST™ – Fiber Holder Kit: Precision & Speed for Splicing – 5 x 250um, 2 x 900um fiber holders

Maximize your splicing efficiency and consistency with the Fiber Holder Kit. Designed for seamless integration with your cleavers and fusion splicers, these holders ensure perfect fiber placement every time.

ST-R240VIP – FiberMASTER Video Inspection Probe

FiberMASTER Video Inspection Probe

ST-R240SIPV – FiberMASTER Single-mode OTDR

FiberMASTER Single-mode OTDR (1310/1550) with SC connector, Inspection port, Power meter

Test, Troubleshoot and Certify cabling faster with the FiberMASTER OTDR.

The FiberMASTER OTDR is available in 4 options, Quad, multimode, singlemode and PON.

The OTDRs feature both high dynamic range and small dead zones providing the precision required for installation and troubleshooting alike. The software simplifies certification of cabling to meet TIA/ISO/IEC/IEEE requirements with simple pass/fail results. Additionally custom test parameters are easily set to accommodate any application.

OTDRs can be complicated to configure and achieve accurate results. FiberMASTER automates testing and steps you through the process as shown below.

For FTTx/FTTH applications the PON OTDR identifies split ratios for easy testing and troubleshooting of inactive and active networks. The 1625nm wavelength allows in-service testing of networks without interrupting existing subscribers.

Why do I need a FiberMASTER?

It depends how important speed and accuracy are to you.

FiberMASTER – size, simplicity and value without compromise, made in the USA, tested in Germany.

The new FiberMASTER series of fiber optic testers will make it easier and faster to verify, troubleshoot and certify fiber optic cabling.
The OTDR, PON OTDR, Power Meter and Light Source, and Inspection Probe will enable cable installers to get the dependable test results needed, while saving thousands of dollars.
As one of the smallest OTDRs in the world you will find them easier to carry and operate while the rubberized housing will protect your investment. The simplified setup options makes them easy to use, saving you time on training and reducing the likelihood of errors.

Our New York Research and Development center of excellence has over 30 years experience designing OTDRs providing you with the most advanced, compact optical test systems available.

ST-R240QIP – FiberMASTER Quad OTDR

FiberMASTER Quad OTDR (850/1300/1310/1550) with SC connectors, Inspection port, Power meter

Test, Troubleshoot and Certify cabling faster with the FiberMASTER OTDR.

The FiberMASTER OTDR is available in 4 options, Quad, multimode, singlemode and PON.

The OTDRs feature both high dynamic range and small dead zones providing the precision required for installation and troubleshooting alike. The software simplifies certification of cabling to meet TIA/ISO/IEC/IEEE requirements with simple pass/fail results. Additionally custom test parameters are easily set to accommodate any application.

OTDRs can be complicated to configure and achieve accurate results. FiberMASTER automates testing and steps you through the process as shown below.

For FTTx/FTTH applications the PON OTDR identifies split ratios for easy testing and troubleshooting of inactive and active networks. The 1625nm wavelength allows in-service testing of networks without interrupting existing subscribers.

Why do I need a FiberMASTER?

It depends how important speed and accuracy are to you.

FiberMASTER – size, simplicity and value without compromise, made in the USA, tested in Germany.

The new FiberMASTER series of fiber optic testers will make it easier and faster to verify, troubleshoot and certify fiber optic cabling.
The OTDR, PON OTDR, Power Meter and Light Source, and Inspection Probe will enable cable installers to get the dependable test results needed, while saving thousands of dollars.
As one of the smallest OTDRs in the world you will find them easier to carry and operate while the rubberized housing will protect your investment. The simplified setup options makes them easy to use, saving you time on training and reducing the likelihood of errors.

Our New York Research and Development center of excellence has over 30 years experience designing OTDRs providing you with the most advanced, compact optical test systems available.

ST-R240PMLS – FiberMASTER Power Meter and Light Source

FiberMASTER Multimode/single-mode power meter and quad light source kit, with Inspection port, VFL

Test, Troubleshoot and Certify cabling faster with the FiberMASTER OTDR.

The FiberMASTER OTDR is available in 4 options, Quad, multimode, singlemode and PON.

The OTDRs feature both high dynamic range and small dead zones providing the precision required for installation and troubleshooting alike. The software simplifies certification of cabling to meet TIA/ISO/IEC/IEEE requirements with simple pass/fail results. Additionally custom test parameters are easily set to accommodate any application.

OTDRs can be complicated to configure and achieve accurate results. FiberMASTER automates testing and steps you through the process as shown below.

For FTTx/FTTH applications the PON OTDR identifies split ratios for easy testing and troubleshooting of inactive and active networks. The 1625nm wavelength allows in-service testing of networks without interrupting existing subscribers.

Why do I need a FiberMASTER?

It depends how important speed and accuracy are to you.

FiberMASTER – size, simplicity and value without compromise, made in the USA, tested in Germany.

The new FiberMASTER series of fiber optic testers will make it easier and faster to verify, troubleshoot and certify fiber optic cabling.
The OTDR, PON OTDR, Power Meter and Light Source, and Inspection Probe will enable cable installers to get the dependable test results needed, while saving thousands of dollars.
As one of the smallest OTDRs in the world you will find them easier to carry and operate while the rubberized housing will protect your investment. The simplified setup options makes them easy to use, saving you time on training and reducing the likelihood of errors.

Our New York Research and Development center of excellence has over 30 years experience designing OTDRs providing you with the most advanced, compact optical test systems available.

ST-R240PMIV – FiberMASTER MM/SM Power Meter

FiberMASTER Multimode/single-mode power meter with interchangable SC/SC/FC connectors, Inspection port, VFL

ST-R240PIP – FiberMASTER PON OTDR

FiberMASTER PON OTDR (1310/1550/1625) with SC-APC connectors, Inspection port, Power meter

Test, Troubleshoot and Certify cabling faster with the FiberMASTER OTDR.

The FiberMASTER OTDR is available in 4 options, Quad, multimode, singlemode and PON.

The OTDRs feature both high dynamic range and small dead zones providing the precision required for installation and troubleshooting alike. The software simplifies certification of cabling to meet TIA/ISO/IEC/IEEE requirements with simple pass/fail results. Additionally custom test parameters are easily set to accommodate any application.

OTDRs can be complicated to configure and achieve accurate results. FiberMASTER automates testing and steps you through the process as shown below.

For FTTx/FTTH applications the PON OTDR identifies split ratios for easy testing and troubleshooting of inactive and active networks. The 1625nm wavelength allows in-service testing of networks without interrupting existing subscribers.

Why do I need a FiberMASTER?

It depends how important speed and accuracy are to you.

FiberMASTER – size, simplicity and value without compromise, made in the USA, tested in Germany.

The new FiberMASTER series of fiber optic testers will make it easier and faster to verify, troubleshoot and certify fiber optic cabling.
The OTDR, PON OTDR, Power Meter and Light Source, and Inspection Probe will enable cable installers to get the dependable test results needed, while saving thousands of dollars.
As one of the smallest OTDRs in the world you will find them easier to carry and operate while the rubberized housing will protect your investment. The simplified setup options makes them easy to use, saving you time on training and reducing the likelihood of errors.

Our New York Research and Development center of excellence has over 30 years experience designing OTDRs providing you with the most advanced, compact optical test systems available.

ST-R240MIPV – FiberMASTER Multimode OTDR

FiberMASTER Multimode OTDR (850/1300) with SC connector, Inspection port, Power meter

Test, Troubleshoot and Certify cabling faster with the FiberMASTER OTDR.

The FiberMASTER OTDR is available in 4 options, Quad, multimode, singlemode and PON.

The OTDRs feature both high dynamic range and small dead zones providing the precision required for installation and troubleshooting alike. The software simplifies certification of cabling to meet TIA/ISO/IEC/IEEE requirements with simple pass/fail results. Additionally custom test parameters are easily set to accommodate any application.

OTDRs can be complicated to configure and achieve accurate results. FiberMASTER automates testing and steps you through the process as shown below.

For FTTx/FTTH applications the PON OTDR identifies split ratios for easy testing and troubleshooting of inactive and active networks. The 1625nm wavelength allows in-service testing of networks without interrupting existing subscribers.

Why do I need a FiberMASTER?

It depends how important speed and accuracy are to you.

FiberMASTER – size, simplicity and value without compromise, made in the USA, tested in Germany.

The new FiberMASTER series of fiber optic testers will make it easier and faster to verify, troubleshoot and certify fiber optic cabling.
The OTDR, PON OTDR, Power Meter and Light Source, and Inspection Probe will enable cable installers to get the dependable test results needed, while saving thousands of dollars.
As one of the smallest OTDRs in the world you will find them easier to carry and operate while the rubberized housing will protect your investment. The simplified setup options makes them easy to use, saving you time on training and reducing the likelihood of errors.

Our New York Research and Development center of excellence has over 30 years experience designing OTDRs providing you with the most advanced, compact optical test systems available.

ST-R240LSIV – FiberMASTER Quad Light Source

FiberMASTER Quad light source with LC connectors, Inspection port, VFL

ST-LT4500S – LANTEK IV-S 500MHZ (WITH PL/CH ADAPTERS) and 1 Year of Sapphire Care Support Bundle

The ST-LT4500S bundle includes a LanTEK IV-S 500MHz, permanent link adapters, channel adapters, and 1 year Saphire Care Plan, offering complete protection for your certifier.

• 7 second test time
• World’s fastest Cloud enabled certifier
• VisiLINQ™ permanent link adapters
• Project navigation in the Cloud
• Twice the CPU power as LanTEK IV

ST-LT4500S – LANTEK IV-S 500MHZ (WITH PL/CH ADAPTERS) and 1 Year of Sapphire Care Support Bundle

The ST-LT4500S bundle includes a LanTEK IV-S 500MHz, permanent link adapters, channel adapters, and 1 year Saphire Care Plan, offering complete protection for your certifier.

The LanTEK IV-S cable certifier brings a new standard to the industry, saving you time and improving profitability. It’s time to change the way you certify.

A copper and fiber cable certifier, will test and save a Cat6A link in 7 seconds and certify links up to Cat8.1 and Cat8.2, including TCL and Resistance Unbalance measurements. Plus, LanTEK IV-S future-proofs your investment – it will sweep to 3000MHz providing room for future ISO/TIA test standards.

ST-LT4500FS – LanTEK IV-500MHz with PL/CH adapters, FiberTEK IV MM and SM, 1 Year of Sapphire Care Support

LanTEK IV-500 MHz, Permanent Link Adapters, Channel Adapters, FiberTEK IV MM LED and SM Laser Kit with LC MM 50/125μm, LC SM 9/125μm and 1 Year Sapphire Care Plan

ST-LT43000S3Y – LANTEK IV-S 3000MHZ (WITH PL/CH ADAPTERS) and 3 Years of Sapphire Care Support Bundle

The ST-LT43000S3Y bundle includes a LanTEK IV-S 3000MHz, permanent link adapters, channel adapters, and 3 year Saphire Care Plan, offering complete protection for your certifier.

The LanTEK IV-S cable certifier brings a new standard to the industry, saving you time and improving profitability. It’s time to change the way you certify.

A copper and fiber cable certifier, will test and save a Cat6A link in 7 seconds and certify links up to Cat8.1 and Cat8.2, including TCL and Resistance Unbalance measurements. Plus, LanTEK IV-S future-proofs your investment – it will sweep to 3000MHz providing room for future ISO/TIA test standards.

ST-LT43000S – LANTEK IV-S 3000MHZ (WITH PL/CH ADAPTERS) and 1 Year of Sapphire Care Support Bundle

The ST-LT43000S bundle includes a LanTEK IV-S 3000MHz, permanent link adapters, channel adapters, and 1 year Saphire Care Plan, offering complete protection for your certifier.

• 7 second test time
• World’s fastest Cloud enabled certifier
• VisiLINQ™ permanent link adapters
• Project navigation in the Cloud
• Twice the CPU power as LanTEK IV

ST-LT43000FS3Y – LanTEK IV-3000MHz with PL/CH adapters, FiberTEK IV MM and SM, 3 Years of Sapphire Care Support

LanTEK IV-3000 MHz, Permanent Link Adapters, Channel Adapters, FiberTEK IV MM LED and SM Laser Kit with LC MM 50/125μm, LC SM 9/125μm and 3 Year Sapphire Care Plan

ST-171000 – SecuriTEST IP Digital/ Analog/HD Coax CCTV Tester

SecuriTEST IP is an installation and troubleshooting tester for digital/IP, HD coax and analog CCTV camera systems. With a single tester that can power, configure and document, SecuriTEST IP increases productivity from start to finish.

ST-163009 – LANTEK IV-S 3000MHZ (WITH PL/CH ADAPTERS)

THE MOST POWERFUL AND FASTEST CERTIFIER WE’VE EVER MADE.

• 7 second test time
• World’s fastest Cloud enabled certifier
• VisiLINQ™ permanent link adapters
• Project navigation in the Cloud
• Twice the CPU power as LanTEK IV

ST-163008 – LanTEK IV-S 500Mhz (with PL/CH Adapters)

The LanTEK IV-S cable certifier brings a new standard to the industry, saving you time and improving profitability. It’s time to change the way you certify.

A copper and fiber cable certifier, will test and save a Cat6A link in 7 seconds and certify links up to Cat8.1 and Cat8.2, including TCL and Resistance Unbalance measurements. Plus, LanTEK IV-S future-proofs your investment – it will sweep to 3000MHz providing room for future ISO/TIA test standards.

THE MOST POWERFUL AND FASTEST CERTIFIER WE’VE EVER MADE.

• 7 second test time
• World’s fastest Cloud enabled certifier
• VisiLINQ™ permanent link adapters
• Project navigation in the Cloud
• Twice the CPU power as LanTEK IV

ST-158005 – VDV II PRO – CABLE VERIFIER

The VDV II Series are easy to use cable testers that check the integrity of copper cables commonly found in domestic, commercial or industrial voice, data or video installations, including telephone wiring, data network and video/security cabling.

Employing state-of-the-art technology, VDV II offers functionality not previously available in a wiremapper. The advanced wiremap engine accurately displays complex wiring faults instantaneously while TDR (Time Domain Reflectometry) aids troubleshooting and improves on-site productivity.

• Measures cable length
• Provides distance to fault (TDR)
• Identifies wiring errors instantly
• Determines services running: ISDN, PBX and PoE
• RJ-11, RJ-12, RJ-45 and COAX ports
• Now comes with the AnyWARE cloud App for iPhone or Android.

ST-157003 – SignalTEK 10G PRO with Fiber and Networking Testing

SIGNALTEK 10G BANDWIDTH TESTER

The new SignalTEK 10G measures the maximum bandwidth of the network cabling up to 10 Gigabits per second. By simulating actual network traffic users can test, troubleshoot, and document network and data cable performance up to 10 Gigabit Ethernet standards.

SignalTEK 10G has built-in Wi-Fi connectivity to connect seamlessly to the free AnyWARE Cloud test management system. AnyWARE Cloud offers pre-configuration to eliminate errors on-site, label printer connectivity to save time, and “proof of performance” PDF reports for the clients.

Why do I need a 10G Ethernet Tester?

Problem:
LAN networks are at risk of expensive downtime and lost productivity due to the ever-increasing demand for bandwidth-hungry services such as video streaming, video conferencing, CCTV cameras, and Wi-Fi access points.

Solution:
SignalTEK 10G will measure the maximum bandwidth available of the network, identify bottlenecks and discover opportunities to increase bandwidth without replacing expensive data cabling.

Avoid network downtime.
Troubleshoot Ethernet connectivity issues faster using diagnostic tools.

Pinpoint bottlenecks faster.
Discover which part of your network is causing the bottleneck.

Validate network upgrades.
Verify Multi-Gigabit switch upgrades to 1/2.5/5 and 10Gb/s speeds.

ST-156006 – SignalTEK CT with Touchscreen

Now includes touchscreen. Advanced wiremapping with TDR fault location. Gigabit performance test to the IEEE802.3ab Ethernet standard. Automatic generation of PDF reports. Report upload to USB memory stick without a PC.

The SignalTEK CT issues a PDF report to prove that your installed data cables can carry Gigabit Ethernet traffic at full speed with no errors, and confirms correct wiremap results.

ST-156005 – SignalTEK NT with Touchscreen

Now includes a touchscreen. Gigabit performance testing on passive cabling and active networks. Generates PDF test reports to IEEE 802.3ab standard. Simulates VoIP/CCTV/Web/IP video network traffic. Tests connection speed, port ID, ping, traceroute, IPv4/IPv6. Supports TREND AnyWARE™ App.

If you install, maintain or troubleshoot data cabling and Ethernet networks, SignalTEK NT allows you to prove the performance up to Gigabit Ethernet transmission rates.