Underground Wire Connectors in High Quality

Morris 98026 Submersible Insulated Pedestal Connectors Multi-Port #12 - 350 MCM 6 Port

Submersible Electrical Pedestal Connectors Multi-Port Splice #12 - 350 MCM 6 Port - This Multi-Port Splice Submersible Pedestal Connector can be Used in Direct Burial and Submersible Applications.

Multi-Port Submersible Pedestal Splice Connectors #12 - 350 MCM 6 Port features include:

Fully submersible, completely waterproof Multi-Port Submersible Pedestal Splice
Designed for Use in Hand Holes, Below Grade Boxes, Direct Burial and Submersible Applications
Completely Waterproof Rubber Overmolded Body Ensures Installer Safety and Connector Integrity
Range Taking Design Covers a Wide Range of Wire Sizes using a Stepped "ROCKET" Sealing Feature
AL9CU Dual Rated for Both Copper and Aluminum Cables
Insulated with High Dialectric Strength Abrasion and Chemical Resistant Rubber
Molded with Precise Fit and Supplied with Removable Access Plugs over the Set Screws
Eliminates the Need for Taping, Heat Shrink and other Labor Intensive Insulating Methods
UL 486D Listed for Direct Burial and Submersible Applications
Complies with ANSI C119.1 Specifications
600 Volts
Ambient Temperature Rating Down To 0°F
Order Qty of 1 = 1 Piece

Call For Quote: (704) 979-7100

Morris 67062 Streetlighting Y-Type Mechanical Disconnect Kits #14-#4 Run #14-#2

Streetlighting Y-Type Mechanical Disconnect Kits #14 - #4 Run #14-#2 - These Streetlighting Y-Type Mechanical Disconnect Kits are for Street and Parking Lot Lighting Applications

Streetlighting Y-Type Mechanical Disconnect Kits #14 - #4 Run #14-#2 features include:

Streetlighting Y-Type Mechanical Disconnect Kits Provide A Submersible T-Type Splice Solution fro Street and Parking Lot Lighting Applications
Designed for Use in StreetLight Hand Holes
Completely Waterproof Rubber Overmolded Insulated Body Ensures Installer Safety and Connector Integrity
Range Taking Design Covers a Wide Range of Wire Sizes Thru .38" Diameter using a Stepped "ROCKET" Sealing Feature
AL9CU Dual Rated for Both Copper and Aluminum Cables
Eliminates the Need for Taping, Heat Shrink and other Labor Intensive Insulating Methods
600 Volts
Kits Inlcude: EPDM Rubber Housing, Fuse Clips, Connecting Link(as Required), Silicone Lubricant. - Fuse Not Included
Order Qty of 1 = 1 Piece

Call For Quote: (704) 979-7100

Morris 67075 Streetlighting Y-Type Compression Breakaway Disconnect Kits Non-Fused #4 - #2

Streetlighting Y-Type Compression Breakaway Disconnect Kits Non-Fused #4 - #2 - These Streetlighting Y-Type Compression Breakaway Disconnect Kits are for Street and Parking Lot Lighting Applications

Streetlighting Y-Type Compression Breakaway Disconnect Kits Non-Fused #4 - #2 features include:

Streetlighting Y-Type Compression Breakaway Disconnect Kits Provide Electrical Disconnect when Light Pole is seperated from Base under Impact
Designed for Use in StreetLight Hand Holes
Completely Waterproof Rubber Overmolded Insulated Body Ensures Installer Safety and Connector Integrity
Fuse or Connecting Link Remains in Load Side of Light Pole When Seperated
Range Taking Design Covers a Wide Range of Wire Sizes Thru .38" Diameter using a Stepped "ROCKET" Sealing Feature
AL9CU Dual Rated for Both Copper and Aluminum Cables
Eliminates the Need for Taping, Heat Shrink and other Labor Intensive Insulating Methods
30 Amp
600 Volts
Kits Inlcude: EPDM Rubber Housing, Fuse Clips, Connecting Link(as Required), Silicone Lubricant. - Fuse Not Included
Order Qty of 1 = 1 Piece

Call For Quote: (704) 979-7100

Morris 67074 Streetlighting Y-Type Compression Breakaway Disconnect Kits Non-Fused #14 - #6

Streetlighting Y-Type Compression Breakaway Disconnect Kits Non-Fused #14 - #6 - These Streetlighting Y-Type Compression Breakaway Disconnect Kits are for Street and Parking Lot Lighting Applications

Streetlighting Y-Type Compression Breakaway Disconnect Kits Non-Fused #14 - #6 features include:

Streetlighting Y-Type Compression Breakaway Disconnect Kits Provide Electrical Disconnect when Light Pole is seperated from Base under Impact
Designed for Use in StreetLight Hand Holes
Completely Waterproof Rubber Overmolded Insulated Body Ensures Installer Safety and Connector Integrity
Fuse or Connecting Link Remains in Load Side of Light Pole When Seperated
Range Taking Design Covers a Wide Range of Wire Sizes Thru .38" Diameter using a Stepped "ROCKET" Sealing Feature
AL9CU Dual Rated for Both Copper and Aluminum Cables
Eliminates the Need for Taping, Heat Shrink and other Labor Intensive Insulating Methods
30 Amp
600 Volts
Kits Inlcude: EPDM Rubber Housing, Fuse Clips, Connecting Link(as Required), Silicone Lubricant. - Fuse Not Included
Order Qty of 1 = 1 Piece

Call For Quote: (704) 979-7100

Morris 67073 Streetlighting Y-Type Compression Breakaway Disconnect Kits Fused #4 - #2

Streetlighting Y-Type Compression Breakaway Disconnect Kits Fused #4 - #2 - These Streetlighting Y-Type Compression Breakaway Disconnect Kits are for Street and Parking Lot Lighting Applications

Streetlighting Y-Type Compression Breakaway Disconnect Kits Fused #4 - #2 features include:

Streetlighting Y-Type Compression Breakaway Disconnect Kits Provide Electrical Disconnect when Light Pole is seperated from Base under Impact
Designed for Use in StreetLight Hand Holes
Completely Waterproof Rubber Overmolded Insulated Body Ensures Installer Safety and Connector Integrity
Fuse or Connecting Link Remains in Load Side of Light Pole When Seperated
Range Taking Design Covers a Wide Range of Wire Sizes Thru .38" Diameter using a Stepped "ROCKET" Sealing Feature
Accepts Standard Cartridge Fuses 13/32" X 1-1/2" - No Glass Fuses
AL9CU Dual Rated for Both Copper and Aluminum Cables
Eliminates the Need for Taping, Heat Shrink and other Labor Intensive Insulating Methods
30 Amp
600 Volts
Kits Inlcude: EPDM Rubber Housing, Fuse Clips, Connecting Link(as Required), Silicone Lubricant. - Fuse Not Included
Order Qty of 1 = 1 Piece

Call For Quote: (704) 979-7100

Morris 67071 Streetlighting In-Line Compression Breakaway Disconnect Kits Non-Fused #4 - #2

Streetlighting In-Line Compression Breakaway Disconnect Kits Non-Fused #4 - #2 - These Streetlighting In-Line Compression Breakaway Disconnect Kits are for Street and Parking Lot Lighting Applications

Streetlighting In-Line Compression Breakaway Disconnect Kits Non-Fused #4 - #2 features include:

Streetlighting In-Line Compression Breakaway Disconnect Kits Provide Electrical Disconnect when Light Pole is seperated from Base under Impact
Designed for Use in StreetLight Hand Holes
Completely Waterproof Rubber Overmolded Insulated Body Ensures Installer Safety and Connector Integrity
Fuse or Connecting Link Remains in Load Side of Light Pole When Seperated
Range Taking Design Covers a Wide Range of Wire Sizes Thru .38" Diameter using a Stepped "ROCKET" Sealing Feature
AL9CU Dual Rated for Both Copper and Aluminum Cables
Eliminates the Need for Taping, Heat Shrink and other Labor Intensive Insulating Methods
30 Amp
600 Volts
Kits Inlcude: EPDM Rubber Housing, Fuse Clips, Connecting Link(as Required), Silicone Lubricant. - Fuse Not Included
Order Qty of 1 = 1 Piece

Call For Quote: (704) 979-7100

Morris 67070 Streetlighting In-Line Compression Breakaway Disconnect Kits Non-Fused #14 - #6

Streetlighting In-Line Compression Breakaway Disconnect Kits Non-Fused #14 - #6 - These Streetlighting In-Line Compression Breakaway Disconnect Kits are for Street and Parking Lot Lighting Applications

Streetlighting In-Line Compression Breakaway Disconnect Kits Non-Fused #14 - #6 features include:

Streetlighting In-Line Compression Breakaway Disconnect Kits Provide Electrical Disconnect when Light Pole is seperated from Base under Impact
Designed for Use in StreetLight Hand Holes
Completely Waterproof Rubber Overmolded Insulated Body Ensures Installer Safety and Connector Integrity
Fuse or Connecting Link Remains in Load Side of Light Pole When Seperated
Range Taking Design Covers a Wide Range of Wire Sizes Thru .38" Diameter using a Stepped "ROCKET" Sealing Feature
AL9CU Dual Rated for Both Copper and Aluminum Cables
Eliminates the Need for Taping, Heat Shrink and other Labor Intensive Insulating Methods
30 Amp
600 Volts
Kits Inlcude: EPDM Rubber Housing, Fuse Clips, Connecting Link(as Required), Silicone Lubricant. - Fuse Not Included
Order Qty of 1 = 1 Piece

Call For Quote: (704) 979-7100

Morris 67069 Streetlighting In-Line Compression Breakaway Disconnect Kits Fused #4 - #2

Streetlighting In-Line Compression Breakaway Disconnect Kits Fused #4 - #2 - These Streetlighting In-Line Compression Breakaway Disconnect Kits are for Street and Parking Lot Lighting Applications

Streetlighting In-Line Compression Breakaway Disconnect Kits Fused #4 - #2 features include:

Streetlighting In-Line Compression Breakaway Disconnect Kits Provide Electrical Disconnect when Light Pole is seperated from Base under Impact
Designed for Use in StreetLight Hand Holes
Completely Waterproof Rubber Overmolded Insulated Body Ensures Installer Safety and Connector Integrity
Fuse or Connecting Link Remains in Load Side of Light Pole When Seperated
Range Taking Design Covers a Wide Range of Wire Sizes Thru .38" Diameter using a Stepped "ROCKET" Sealing Feature
Accepts Standard Cartridge Fuses 13/32" X 1-1/2" - No Glass Fuses
AL9CU Dual Rated for Both Copper and Aluminum Cables
Eliminates the Need for Taping, Heat Shrink and other Labor Intensive Insulating Methods
30 Amp
600 Volts
Kits Inlcude: EPDM Rubber Housing, Fuse Clips, Connecting Link(as Required), Silicone Lubricant. - Fuse Not Included
Order Qty of 1 = 1 Piece

Call For Quote: (704) 979-7100

Morris 67067 Streetlighting Y-Type Mechanical Breakaway Disconnect Kits Non-Fused

Streetlighting Y-Type Non-Fused Mechanical Breakaway Disconnect Kits - These Streetlighting Y-Type Non-Fused Mechanical Breakaway Disconnect Kits are for Street and Parking Lot Lighting Applications

Streetlighting Y-Type Non-Fused Mechanical Breakaway Disconnect Kits features include:

Streetlighting Y-Type Mechanical Breakaway Disconnect Kits Provide Electrical Disconnect when Light Pole is seperated from Base under Impact
Designed for Use in StreetLight Hand Holes
Completely Waterproof Rubber Overmolded Insulated Body Ensures Installer Safety and Connector Integrity
Fuse or Connecting Link Remains in Load Side of Light Pole When Seperated
Range Taking Design Covers a Wide Range of Wire Sizes Thru .38" Diameter using a Stepped "ROCKET" Sealing Feature
AL9CU Dual Rated for Both Copper and Aluminum Cables
Eliminates the Need for Taping, Heat Shrink and other Labor Intensive Insulating Methods
30 Amp
600 Volts
Kits Inlcude: EPDM Rubber Housing, Fuse Clips, Connecting Link(as Required), Silicone Lubricant. - Fuse Not Included
Order Qty of 1 = 1 Piece

Call For Quote: (704) 979-7100

Morris 67066 Streetlighting Y-Type Mechanical Breakaway Disconnect Kits Fused

Streetlighting Y-Type Fused Mechanical Breakaway Disconnect Kits - These Streetlighting Y-Type Fused Mechanical Breakaway Disconnect Kits are for Street and Parking Lot Lighting Applications

Streetlighting Y-Type Fused Mechanical Breakaway Disconnect Kits features include:

Streetlighting Y-Type Mechanical Breakaway Disconnect Kits Provide Electrical Disconnect when Light Pole is seperated from Base under Impact
Designed for Use in StreetLight Hand Holes
Completely Waterproof Rubber Overmolded Insulated Body Ensures Installer Safety and Connector Integrity
Fuse or Connecting Link Remains in Load Side of Light Pole When Seperated
Range Taking Design Covers a Wide Range of Wire Sizes Thru .38" Diameter using a Stepped "ROCKET" Sealing Feature
Accepts Standard Cartridge Fuses 13/32" X 1-1/2" - No Glass Fuses
AL9CU Dual Rated for Both Copper and Aluminum Cables
Eliminates the Need for Taping, Heat Shrink and other Labor Intensive Insulating Methods
30 Amp
600 Volts
Kits Inlcude: EPDM Rubber Housing, Fuse Clips, Connecting Link(as Required), Silicone Lubricant. - Fuse Not Included
Order Qty of 1 = 1 Piece

Call For Quote: (704) 979-7100

Morris 67065 Streetlighting In-Line Mechanical Breakaway Disconnect Kits Non-Fused

Streetlighting In-Line Non-Fused Mechanical Breakaway Disconnect Kits - These Streetlighting In-Line Non-Fused Mechanical Breakaway Disconnect Kits are for Street and Parking Lot Lighting Applications

Streetlighting In-Line Non-Fused Mechanical Breakaway Disconnect Kits features include:

Streetlighting In-Line Mechanical Breakaway Disconnect Kits Provide Electrical Disconnect when Light Pole is seperated from Base under Impact
Designed for Use in StreetLight Hand Holes
Completely Waterproof Rubber Overmolded Insulated Body Ensures Installer Safety and Connector Integrity
Fuse or Connecting Link Remains in Load Side of Light Pole When Seperated
Range Taking Design Covers a Wide Range of Wire Sizes Thru .38" Diameter using a Stepped "ROCKET" Sealing Feature
AL9CU Dual Rated for Both Copper and Aluminum Cables
Eliminates the Need for Taping, Heat Shrink and other Labor Intensive Insulating Methods
30 Amp
600 Volts
Kits Inlcude: EPDM Rubber Housing, Fuse Clips, Connecting Link(as Required), Silicone Lubricant. - Fuse Not Included
Order Qty of 1 = 1 Piece

Call For Quote: (704) 979-7100

Morris 67064 Streetlighting In-Line Mechanical Breakaway Disconnect Kits Fused

Streetlighting In-Line Fused Mechanical Breakaway Disconnect Kits - These Streetlighting In-Line Fused Mechanical Breakaway Disconnect Kits are for Street and Parking Lot Lighting Applications

Streetlighting In-Line Fused Mechanical Breakaway Disconnect Kits features include:

Streetlighting In-Line Mechanical Breakaway Disconnect Kits Provide Electrical Disconnect when Light Pole is seperated from Base under Impact
Designed for Use in StreetLight Hand Holes
Completely Waterproof Rubber Overmolded Insulated Body Ensures Installer Safety and Connector Integrity
Fuse or Connecting Link Remains in Load Side of Light Pole When Seperated
Range Taking Design Covers a Wide Range of Wire Sizes Thru .38" Diameter using a Stepped "ROCKET" Sealing Feature
Accepts Standard Cartridge Fuses 13/32" X 1-1/2" - No Glass Fuses
AL9CU Dual Rated for Both Copper and Aluminum Cables
Eliminates the Need for Taping, Heat Shrink and other Labor Intensive Insulating Methods
30 Amp
600 Volts
Kits Inlcude: EPDM Rubber Housing, Fuse Clips, Connecting Link(as Required), Silicone Lubricant. - Fuse Not Included
Order Qty of 1 = 1 Piece

Call For Quote: (704) 979-7100

Morris 98052 Submersible Insulated Streetlighting Connectors Multi-Port Offset #14 - 2/0 3 Port

Submersible Insulated Streetlighting Connectors Multi-Port Offset #14 - 2/0 3 Port - This Submersible Insulated Streetlighting Connector Offset Multi-Port can be Used in StreetLighting and other Direct Burial and Submersible Applications.

Submersible Insulated Streetlighting Connectors Offset Multi-Port #14 - 2/0 3 Port features include:

Fully submersible, completely waterproof Multi-Port Submersible Pedestal Splice
Designed for Use in StreetLight Hand Holes and other Below Grade Boxes, Direct Burial and Submersible Applications
Completely Waterproof Rubber Overmolded Body Ensures Installer Safety and Connector Integrity
Range Taking Design Covers a Wide Range of Wire Sizes using a Stepped "ROCKET" Sealing Feature
AL9CU Dual Rated for Both Copper and Aluminum Cables
Insulated with High Dialectric Strength Abrasion and Chemical Resistant Rubber
Molded with Precise Fit and Supplied with Removable Access Plugs over the Set Screws
Eliminates the Need for Taping, Heat Shrink and other Labor Intensive Insulating Methods
UL 486D Listed for Direct Burial and Submersible Applications
Complies with ANSI C119.1 Specifications
600 Volts
Ambient Temperature Rating Down To 0°F
Order Qty of 1 = 1 Piece

Call For Quote: (704) 979-7100

Morris 98044 Submersible Insulated Streetlighting Connectors Multi-Port #14 - 2/0 4 Port

Submersible Insulated Streetlighting Connectors Multi-Port #14 - 2/0 4 Port - This Submersible Insulated Streetlighting Connector Multi-Port can be Used in StreetLighting and other Direct Burial and Submersible Applications.

Submersible Insulated Streetlighting Connectors Multi-Port #14 - 2/0 4 Port features include:

Fully submersible, completely waterproof Multi-Port Submersible Pedestal Splice
Designed for Use in StreetLight Hand Holes and other Below Grade Boxes, Direct Burial and Submersible Applications
Completely Waterproof Rubber Overmolded Body Ensures Installer Safety and Connector Integrity
Range Taking Design Covers a Wide Range of Wire Sizes using a Stepped "ROCKET" Sealing Feature
AL9CU Dual Rated for Both Copper and Aluminum Cables
Insulated with High Dialectric Strength Abrasion and Chemical Resistant Rubber
Molded with Precise Fit and Supplied with Removable Access Plugs over the Set Screws
Eliminates the Need for Taping, Heat Shrink and other Labor Intensive Insulating Methods
UL 486D Listed for Direct Burial and Submersible Applications
Complies with ANSI C119.1 Specifications
600 Volts
UL Tested Ambient Temperature Rating Down To 0°F
cULus Listed
Order Qty of 1 = 1 Piece

Call For Quote: (704) 979-7100

Morris 98043 Submersible Insulated Streetlighting Connectors Multi-Port #14 - 2/0 3 Port

Submersible Insulated Streetlighting Connectors Multi-Port #14 - 2/0 3 Port - This Submersible Insulated Streetlighting Connector Multi-Port can be Used in StreetLighting and other Direct Burial and Submersible Applications.

Submersible Insulated Streetlighting Connectors Multi-Port features #14 - 2/0 3 Port include:

Fully submersible, completely waterproof Multi-Port Submersible Pedestal Splice
Designed for Use in StreetLight Hand Holes and other Below Grade Boxes, Direct Burial and Submersible Applications
Completely Waterproof Rubber Overmolded Body Ensures Installer Safety and Connector Integrity
Range Taking Design Covers a Wide Range of Wire Sizes using a Stepped "ROCKET" Sealing Feature
AL9CU Dual Rated for Both Copper and Aluminum Cables
Insulated with High Dialectric Strength Abrasion and Chemical Resistant Rubber
Molded with Precise Fit and Supplied with Removable Access Plugs over the Set Screws
Eliminates the Need for Taping, Heat Shrink and other Labor Intensive Insulating Methods
UL 486D Listed for Direct Burial and Submersible Applications
Complies with ANSI C119.1 Specifications
600 Volts
UL Tested Ambient Temperature Rating Down To 0°F
cULus Listed
Order Qty of 1 = 1 Piece

Call For Quote: (704) 979-7100

Morris 98042 Submersible Insulated Streetlighting Connectors Multi-Port #14 - 2/0 2 Port

Submersible Insulated Streetlighting Connectors Multi-Port #14 - 2/0 2 Port - This Submersible Insulated Streetlighting Connector Multi-Port can be Used in StreetLighting and other Direct Burial and Submersible Applications.

Submersible Insulated Streetlighting Connectors Multi-Port #14 - 2/0 2 Port features include:

Fully submersible, completely waterproof Multi-Port Submersible Pedestal Splice
Designed for Use in StreetLight Hand Holes and other Below Grade Boxes, Direct Burial and Submersible Applications
Completely Waterproof Rubber Overmolded Body Ensures Installer Safety and Connector Integrity
Range Taking Design Covers a Wide Range of Wire Sizes using a Stepped "ROCKET" Sealing Feature
AL9CU Dual Rated for Both Copper and Aluminum Cables
Insulated with High Dialectric Strength Abrasion and Chemical Resistant Rubber
Molded with Precise Fit and Supplied with Removable Access Plugs over the Set Screws
Eliminates the Need for Taping, Heat Shrink and other Labor Intensive Insulating Methods
UL 486D Listed for Direct Burial and Submersible Applications
Complies with ANSI C119.1 Specifications
600 Volts
UL Tested Ambient Temperature Rating Down To 0°F
cULus Listed
Order Qty of 1 = 1 Piece

Call For Quote: (704) 979-7100

Morris 98036 Submersible Insulated Pedestal Connectors Multi-Port #12 - 600 MCM 6 Port

Submersible Electrical Pedestal Connectors Multi-Port Splice #12 - 600 MCM 6 Port - This Multi-Port Splice Submersible Pedestal Connector can be Used in Direct Burial and Submersible Applications.

Multi-Port Submersible Pedestal Splice Connectors #12 - 600 MCM 6 Port features include:

Fully submersible, completely waterproof Multi-Port Submersible Pedestal Splice
Designed for Use in Hand Holes, Below Grade Boxes, Direct Burial and Submersible Applications
Completely Waterproof Rubber Overmolded Body Ensures Installer Safety and Connector Integrity
Range Taking Design Covers a Wide Range of Wire Sizes using a Stepped "ROCKET" Sealing Feature
AL9CU Dual Rated for Both Copper and Aluminum Cables
Insulated with High Dialectric Strength Abrasion and Chemical Resistant Rubber
Molded with Precise Fit and Supplied with Removable Access Plugs over the Set Screws
Eliminates the Need for Taping, Heat Shrink and other Labor Intensive Insulating Methods
UL 486D Listed for Direct Burial and Submersible Applications
Complies with ANSI C119.1 Specifications
600 Volts
Ambient Temperature Rating Down To 0°F
Order Qty of 1 = 1 Piece

Call For Quote: (704) 979-7100

Morris 98034 Submersible Insulated Pedestal Connectors Multi-Port #12 - 600 MCM 4 Port

Submersible Electrical Pedestal Connectors Multi-Port Splice #12 - 600 MCM 4 Port - This Multi-Port Splice Submersible Pedestal Connector can be Used in Direct Burial and Submersible Applications.

Multi-Port Submersible Pedestal Splice Connectors #12 - 600 MCM 4 Port features include:

Fully submersible, completely waterproof Multi-Port Submersible Pedestal Splice
Designed for Use in Hand Holes, Below Grade Boxes, Direct Burial and Submersible Applications
Completely Waterproof Rubber Overmolded Body Ensures Installer Safety and Connector Integrity
Range Taking Design Covers a Wide Range of Wire Sizes using a Stepped "ROCKET" Sealing Feature
AL9CU Dual Rated for Both Copper and Aluminum Cables
Insulated with High Dialectric Strength Abrasion and Chemical Resistant Rubber
Molded with Precise Fit and Supplied with Removable Access Plugs over the Set Screws
Eliminates the Need for Taping, Heat Shrink and other Labor Intensive Insulating Methods
UL 486D Listed for Direct Burial and Submersible Applications
Complies with ANSI C119.1 Specifications
600 Volts
Ambient Temperature Rating Down To 0°F
Order Qty of 1 = 1 Piece

Call For Quote: (704) 979-7100

Morris 98033 Submersible Insulated Pedestal Connectors Multi-Port #12 - 600 MCM 3 Port

Submersible Electrical Pedestal Connectors Multi-Port Splice #12 - 600 MCM 3 Port - This Multi-Port Splice Submersible Pedestal Connector can be Used in Direct Burial and Submersible Applications.

Multi-Port Submersible Pedestal Splice Connectors #12 - 600 MCM 3 Port features include:

Fully submersible, completely waterproof Multi-Port Submersible Pedestal Splice
Designed for Use in Hand Holes, Below Grade Boxes, Direct Burial and Submersible Applications
Completely Waterproof Rubber Overmolded Body Ensures Installer Safety and Connector Integrity
Range Taking Design Covers a Wide Range of Wire Sizes using a Stepped "ROCKET" Sealing Feature
AL9CU Dual Rated for Both Copper and Aluminum Cables
Insulated with High Dialectric Strength Abrasion and Chemical Resistant Rubber
Molded with Precise Fit and Supplied with Removable Access Plugs over the Set Screws
Eliminates the Need for Taping, Heat Shrink and other Labor Intensive Insulating Methods
UL 486D Listed for Direct Burial and Submersible Applications
Complies with ANSI C119.1 Specifications
600 Volts
Ambient Temperature Rating Down To 0°F
Order Qty of 1 = 1 Piece

Call For Quote: (704) 979-7100

Morris 98024 Submersible Insulated Pedestal Connectors Multi-Port #12 - 350 MCM 4 Port

Submersible Electrical Pedestal Connectors Multi-Port Splice #12 - 350 MCM 4 Port - This Multi-Port Splice Submersible Pedestal Connector can be Used in Direct Burial and Submersible Applications.

Multi-Port Submersible Pedestal Splice Connectors #12 - 350 MCM 4 Port features include:

Fully submersible, completely waterproof Multi-Port Submersible Pedestal Splice
Designed for Use in Hand Holes, Below Grade Boxes, Direct Burial and Submersible Applications
Completely Waterproof Rubber Overmolded Body Ensures Installer Safety and Connector Integrity
Range Taking Design Covers a Wide Range of Wire Sizes using a Stepped "ROCKET" Sealing Feature
AL9CU Dual Rated for Both Copper and Aluminum Cables
Insulated with High Dialectric Strength Abrasion and Chemical Resistant Rubber
Molded with Precise Fit and Supplied with Removable Access Plugs over the Set Screws
Eliminates the Need for Taping, Heat Shrink and other Labor Intensive Insulating Methods
UL 486D Listed for Direct Burial and Submersible Applications
Complies with ANSI C119.1 Specifications
600 Volts
Ambient Temperature Rating Down To 0°F
Order Qty of 1 = 1 Piece

Call For Quote: (704) 979-7100

Morris 98023 Submersible Insulated Pedestal Connectors Multi-Port #12 - 350 MCM 3 Port

Submersible Electrical Pedestal Connectors Multi-Port Splice #12 - 350 MCM 3 Port - This Multi-Port Splice Submersible Pedestal Connector can be Used in Direct Burial and Submersible Applications.

Multi-Port Submersible Pedestal Splice Connectors #12 - 350 MCM 3 Port features include:

Fully submersible, completely waterproof Multi-Port Submersible Pedestal Splice
Designed for Use in Hand Holes, Below Grade Boxes, Direct Burial and Submersible Applications
Completely Waterproof Rubber Overmolded Body Ensures Installer Safety and Connector Integrity
Range Taking Design Covers a Wide Range of Wire Sizes using a Stepped "ROCKET" Sealing Feature
AL9CU Dual Rated for Both Copper and Aluminum Cables
Insulated with High Dialectric Strength Abrasion and Chemical Resistant Rubber
Molded with Precise Fit and Supplied with Removable Access Plugs over the Set Screws
Eliminates the Need for Taping, Heat Shrink and other Labor Intensive Insulating Methods
UL 486D Listed for Direct Burial and Submersible Applications
Complies with ANSI C119.1 Specifications
600 Volts
Ambient Temperature Rating Down To 0°F
Order Qty of 1 = 1 Piece

Call For Quote: (704) 979-7100

Morris 98014 Submersible Insulated Splice - In-Line #12 - 350 MCM

Submersible Electrical Pedestal Connectors In-Line Splice #12 - 350 MCM - This In Line Splice Submersible Pedestal Connector can be Used in Direct Burial and Submersible Applications.

In Line Submersible Pedestal Splice Connectors #12 - 350 MCM features include:

Designed for use in Direct Burial & Submerible installations such as hand holes, below grade boxes, in the ground or submersed in water
Range Taking Design Reduces Inventory
AL9CU Dual Rated for Copper and Aluminum Conductors
Insulated with High Dielectric Strength Tubber Compound
Molded for Precise Fit & supplied with removable access plugs over the hex screws
Eliminates the need for Taping, Heat Shrink, Etc.
Abrasion and Chemical Resistant, will not support combustion
UL Listed for Wet or Damp Locations, Direct Burial & Submersible per UL 486D
Complies with ANSI C119.1 Specifications
600 Volts
cULus Listed
UL tested Ambient Temperature Rating Down To 0°F
Order Qty of 1 = 1 Piece

Call For Quote: (704) 979-7100

Morris 98012 Submersible Insulated Splice - In-Line #14 - 2/0

Submersible Electrical Pedestal Connectors In-Line Splice #14 - 2/0 - This In Line Splice Submersible Pedestal Connector can be Used in Direct Burial and Submersible Applications.

In Line Submersible Pedestal Splice Connectors #14 - 2/0 features include:

Designed for use in Direct Burial & Submerible installations such as hand holes, below grade boxes, in the ground or submersed in water
Range Taking Design Reduces Inventory
AL9CU Dual Rated for Copper and Aluminum Conductors
Insulated with High Dielectric Strength Tubber Compound
Molded for Precise Fit & supplied with removable access plugs over the hex screws
Eliminates the need for Taping, Heat Shrink, Etc.
Abrasion and Chemical Resistant, will not support combustion
UL Listed for Wet or Damp Locations, Direct Burial & Submersible per UL 486D
Complies with ANSI C119.1 Specifications
600 Volts
cULus Listed
UL tested Ambient Temperature Rating Down To 0°F
Order Qty of 1 = 1 Piece

Call For Quote: (704) 979-7100

Filter

Brands

Price Range

Solderless Connector Type

Certifications

Collection

Underground Connectors

Filter

Brands

Price Range

Solderless Connector Type

Certifications

Collection

Submersible Electrical Pedestal Connectors Multi-Port Splice #12 - 350 MCM 6 Port - This Multi-Port Splice Submersible Pedestal Connector can be Used in Direct Burial and Submersible Applications.

Streetlighting Y-Type Mechanical Disconnect Kits #14 - #4 Run #14-#2 - These Streetlighting Y-Type Mechanical Disconnect Kits are for Street and Parking Lot Lighting Applications

Streetlighting Y-Type Compression Breakaway Disconnect Kits Non-Fused #4 - #2 - These Streetlighting Y-Type Compression Breakaway Disconnect Kits are for Street and Parking Lot Lighting Applications

Streetlighting Y-Type Compression Breakaway Disconnect Kits Non-Fused #14 - #6 - These Streetlighting Y-Type Compression Breakaway Disconnect Kits are for Street and Parking Lot Lighting Applications

Streetlighting Y-Type Compression Breakaway Disconnect Kits Fused #4 - #2 - These Streetlighting Y-Type Compression Breakaway Disconnect Kits are for Street and Parking Lot Lighting Applications

Streetlighting In-Line Compression Breakaway Disconnect Kits Non-Fused #4 - #2 - These Streetlighting In-Line Compression Breakaway Disconnect Kits are for Street and Parking Lot Lighting Applications

Streetlighting In-Line Compression Breakaway Disconnect Kits Non-Fused #14 - #6 - These Streetlighting In-Line Compression Breakaway Disconnect Kits are for Street and Parking Lot Lighting Applications

Streetlighting In-Line Compression Breakaway Disconnect Kits Fused #4 - #2 - These Streetlighting In-Line Compression Breakaway Disconnect Kits are for Street and Parking Lot Lighting Applications

Streetlighting Y-Type Non-Fused Mechanical Breakaway Disconnect Kits - These Streetlighting Y-Type Non-Fused Mechanical Breakaway Disconnect Kits are for Street and Parking Lot Lighting Applications

Streetlighting Y-Type Fused Mechanical Breakaway Disconnect Kits - These Streetlighting Y-Type Fused Mechanical Breakaway Disconnect Kits are for Street and Parking Lot Lighting Applications

Streetlighting In-Line Non-Fused Mechanical Breakaway Disconnect Kits - These Streetlighting In-Line Non-Fused Mechanical Breakaway Disconnect Kits are for Street and Parking Lot Lighting Applications

Streetlighting In-Line Fused Mechanical Breakaway Disconnect Kits - These Streetlighting In-Line Fused Mechanical Breakaway Disconnect Kits are for Street and Parking Lot Lighting Applications

Submersible Insulated Streetlighting Connectors Multi-Port Offset #14 - 2/0 3 Port - This Submersible Insulated Streetlighting Connector Offset Multi-Port can be Used in StreetLighting and other Direct Burial and Submersible Applications.

Submersible Insulated Streetlighting Connectors Multi-Port #14 - 2/0 4 Port - This Submersible Insulated Streetlighting Connector Multi-Port can be Used in StreetLighting and other Direct Burial and Submersible Applications.

Submersible Insulated Streetlighting Connectors Multi-Port #14 - 2/0 3 Port - This Submersible Insulated Streetlighting Connector Multi-Port can be Used in StreetLighting and other Direct Burial and Submersible Applications.

Submersible Insulated Streetlighting Connectors Multi-Port #14 - 2/0 2 Port - This Submersible Insulated Streetlighting Connector Multi-Port can be Used in StreetLighting and other Direct Burial and Submersible Applications.

Submersible Electrical Pedestal Connectors Multi-Port Splice #12 - 600 MCM 6 Port - This Multi-Port Splice Submersible Pedestal Connector can be Used in Direct Burial and Submersible Applications.

Submersible Electrical Pedestal Connectors Multi-Port Splice #12 - 600 MCM 4 Port - This Multi-Port Splice Submersible Pedestal Connector can be Used in Direct Burial and Submersible Applications.

Submersible Electrical Pedestal Connectors Multi-Port Splice #12 - 600 MCM 3 Port - This Multi-Port Splice Submersible Pedestal Connector can be Used in Direct Burial and Submersible Applications.

Submersible Electrical Pedestal Connectors Multi-Port Splice #12 - 350 MCM 4 Port - This Multi-Port Splice Submersible Pedestal Connector can be Used in Direct Burial and Submersible Applications.

Submersible Electrical Pedestal Connectors Multi-Port Splice #12 - 350 MCM 3 Port - This Multi-Port Splice Submersible Pedestal Connector can be Used in Direct Burial and Submersible Applications.

Submersible Electrical Pedestal Connectors In-Line Splice #12 - 350 MCM - This In Line Splice Submersible Pedestal Connector can be Used in Direct Burial and Submersible Applications.

Submersible Electrical Pedestal Connectors In-Line Splice #14 - 2/0 - This In Line Splice Submersible Pedestal Connector can be Used in Direct Burial and Submersible Applications.