Mounts

Rhino Brackets Low Profile Tilt TV Wall Mount for 32-55 Inch Screens

Low profile simplicity meets functionality in this tilt wall mount bracket from Rhino Brackets. This TV wall mount is designed for flat panel screens measuring 32 to 55 inches and weighing up to 77 pounds. The open architecture of this TV bracket leads to increased ventilation to increase the longevity of your TV components, as well as easy access for wiring during installation. It tilts up to fourteen degrees downward, allowing you to achieve the optimal viewing angle.

The included bubble level guarantees accuracy and a nice, even hang without the need for extra measuring tools. When mounted, it sits less than one inch (25mm) from the wall for a minimum footprint.

Rhino Brackets Low Profile Tilt TV Wall Bracket for 37-70 Inch Screens

This tilt wall mount bracket from Rhino Brackets is both elegant and functional. It is designed for flat panel screens measuring 37 to 70 inches and weighing up to 77 pounds. The open architecture of this TV bracket creates increased ventilation, increasing the longevity of your TV components, as well as offering easy access for wiring during installation. It tilts up to fourteen degrees downward for the optimal viewing angle. When mounted, it sits less than one inch (25mm) from the wall for a minimum footprint.

Simplicity reigns for this low profile fixed wall mount from Rhino Brackets. This TV wall mount is designed for flat panel screens measuring 37 to 80 inches and weighing up to 77 pounds. The open architecture of this TV bracket lends to increased ventilation to increase the longevity of your TV components, as well as easy access for wiring during installation.

A bubble level is included to increase accuracy and provide a nice, even hang without the need for extra measuring tools. When mounted, it sits less than one inch (25mm) from the wall for an ultimate slim footprint.

Low Profile Fixed TV Wall Mount for 32-55 Inch Screens

Simplicity is the key to this low profile fixed wall mount from Rhino Brackets. This TV wall mount is designed for flat panel screens measuring 32 to 55 inches and weighing up to 77 pounds. The open architecture of this TV bracket leads to increased ventilation to increase the longevity of your TV components, as well as easy access for wiring during installation. When mounted, it sits less than one inch (20.5mm) from the wall for a minimum footprint.

HIDEit HBat Horizontal Baseball Bat Mount

Complete the baseball or softball decor in your office or bedroom by making your favorite bat the center of attention! Proudly display your collectible baseball bat or memorabilia bat with our Horizontal Baseball Bat Wall Mount. The HIDEit HBat Mount is a sleek and discrete, single-piece storage solution that makes your bat the focus, not the mount! Plus, we've included protective rubber caps ensuring your bat stays securely mounted, won't slip, and is safe from potential scratches. So, go ahead and show your pride with the HIDEit Horizontal Baseball Bat Mount!

Monitor Mount Bracket - 13-27 Inch 

This Articulating Monitor Mount supports most 13" to 27" monitors with a capacity of 44 lbs. Built-in leveling adjustment ensures perfect wall positioning. High quality powder-coated finish provides a stylish anti-scratch surface.

Rhino Brackets Full Motion TV Wall Mount for 37-80 Inch Screens, Dual Arm

Full Motion Design - Tilts and swivels for multiple viewing angles. Sturdy steel construction provides solid and long-lasting performance with a weight capacity of 88 lbs. Cable management hook allows you to easily keep cables out of view. High quality power-coated finish provides a stylish anti-scratch surface.

Note: Supported screen size is provided as a reference only. Please check the bracket dimensions in the specs tab and make sure the overall bracket size does not exceed your TV.

The Ultimate Low-Profile Mount

The Crimson AV AU65 Ultra-Thin Articulating Wall Mount is designed exclusively for ultra-thin flat screen HDTVs. This wall mount keeps an incredibly low profile, protruding only 1.09" when fully retracted, yet extends a full 20 inches when extended. To help maintain that sleek low profile look all around, it also has built-in cable management. This keeps the cables concealed and out of view.

Simple and Versatile

It's easy to install and mounts to wood studs, concrete or cinder block. All hardware is included. It even comes with a built-in level so you can be confident your wall mount is completely level. Finish it off with the included decorative cover to hide the screws.

Rhino Brackets Heavy-Duty Foldable Tilt TV Wall Mount

This TV mount can hold your large TVs up to 90”in size and 70kg/154lbs in weight firmly. The foldable design reduces shipping cost while maximizing shelf space. For better safety and security, its anti-theft design provides great protection. This mount comes with a quality steel knob for firmer grip and open wall plate access for wiring. Minimalist design-yet with solid holding power.

An extra-large tilting TV mount offers several benefits and uses. Here are some of them:

• Enhanced Viewing Experience: A tilting TV mount allows you to adjust the viewing angle of your television. With an extra-large tilting mount, you can easily tilt your TV up or down to achieve the best viewing position, minimizing glare and optimizing the picture quality.

• Space Optimization: Mounting your TV on a wall with a tilting mount helps save valuable floor space, especially in smaller rooms. By tilting the TV, you can position it higher on the wall, freeing up space for other furniture or decor.

• Versatility: Extra-large tilting TV mounts are designed to accommodate larger TVs, providing a secure and stable mounting solution for screens that are heavier or have a larger size. They often have a higher weight capacity and are compatible with VESA standards, making them suitable for a wide range of TV models.

• Easy Cable Management: Wall-mounted TVs with tilting mounts offer an opportunity to organize and conceal cables more effectively. Many tilting mounts come with built-in cable management systems, allowing you to route and hide cables behind the TV or within the mount itself, creating a cleaner and more streamlined look.

• Flexible Mounting Options: An extra-large tilting TV mount usually offers multiple mounting hole patterns and adjustable arms, enabling you to position the TV exactly where you want it on the wall. This flexibility ensures compatibility with different wall types and provides options for centering the TV or positioning it to fit your preferred viewing height.

• Safety and Stability: Tilting mounts are designed to provide a secure and stable platform for your TV. Extra-large tilting mounts are constructed with strong materials and robust mechanisms to support the weight of larger TVs. This ensures the safety of your television and reduces the risk of accidental tipping or damage.

• Easy Installation: Many extra-large tilting mounts come with a user-friendly installation process. They often include a detailed manual, mounting hardware, and even templates to assist you in aligning the mount correctly on the wall. This makes it easier for individuals to install the mount themselves, saving time and money compared to hiring a professional installer.

In summary, the benefits and uses of an extra-large tilting TV mount include enhanced viewing experience, space optimization, versatility, easy cable management, flexible mounting options, safety and stability, and easy installation.

HIDEit XB7 Xfinity XB7 Gateway Modem Mount

Struggling to find a home for your Xfinity XB7 router? Safely STOREit where you need it the most with the HIDEit XB7 Wall Mount! Mountable in three different directions, this wireless modem mount gives you the flexibility to safely store your Comcast Xfinity modem without compromises. Custom-designed to fit the xFi Gateway, this mount is made from 16-gauge steel for strength while the white powder coat protects and seamlessly blends with your device. Our Xfinity mount doesn't block Wi-Fi signals or ports, so you can be sure your internet won't slow down. Complete your office setup today with the HIDEit XB7!

Rhino Brackets Full Motion TV Wall Mount for 32-70 Inch Screens, Dual Arm

Full Motion Design - Tilts and swivels for multiple viewing angles. Sturdy steel construction provides solid and long-lasting performance with a weight capacity of 88 lbs. Cable management hook allows you to easily keep cables out of view. High quality power-coated finish provides a stylish anti-scratch surface.

Note: Supported screen size is provided as a reference only. Please check the bracket dimensions in the specs tab and make sure the overall bracket size does not exceed your TV.

Heckler Camera Mount for Logitech BRIO Cameras

Quickly deploy Logitech BRIO cameras with ADA compliance in huddle rooms throughout the enterprise.

Cable management included.

Optionally pass Logitech BRIO's USB-C cable through your wall without hassle. Just route the cable through a 1/2-inch hole. Our mount trims and hides the hole.

ADA compliance built-in.

Safely install at any height in any location. ADA Camera Mount is carefully designed to prevent your camera from protruding more than four inches from the wall.

Rhino Brackets Full Motion TV Ceiling Mount for 37-80" Screens w/ 61.7" Arm

Telescoping height adjustment allows for optimal viewing level. Full Motion Design - Tilts and swivels for multiple viewing angles. Sturdy construction provides solid and long-lasting performance. Easy cable management design allows for cables to be hidden within the mounting pole keeping cables out of view, for an elegant installation. High quality power-coated finish provides a stylish anti-scratch surface.

Low Profile, Universal Design

Adjustable flat wall mount with Universal hole pattern from Crimson AV is designed to fit a wide variety of flat panel screens. The F55A makes a secure installation quick and easy. Post-installation leveling allows for perfect screen positioning even when the ceiling is uneven. "Click in Place" screen placement requires no tools to secure the screen on the wall. Open wall plate design and kickstand feature provides easy access to wiring.

Articulating Mount for 13-46 Inch TVs

World's thinnest articulating mount for 13"-46" TV's securely holds flat panel displays a mere 1.09" from the wall when retracted and a full 20" when extended. Features include smooth tilt adjustments of +15°forward and 3°side-to-side roll and three attachment points for wood studs or concrete walls for additional installation safety and security. There is a built-in level for quick and easy installation and an integrated cable management system that preserves design and décor aesthetics.

Universal Tilt, Post Installation Leveling

Adjustable tilt wall mount from Crimson AV features a universal hole pattern to fit a variety of flat panel screens. Smooth tilt adjustments of 15°forward and 5°back with a locking knob for multiple viewing angles. Post installation leveling allows for perfect screen postion even when ceiling is uneven. Pre-installed securing screws are included and be used as a theft deterrent. Open wall plate design allows for easy access to wires and cables.

HIDEit DSkate Vertical Display Skateboard Mount

Have a kick a** board? MOUNTit! The HIDEit Display Skate Mount is the best way to vertically store your board while showing off your custom skateboard deck! This easy-to-install skateboard wall mount works with all complete skateboards including OG, Longboards, Penny Boards and more! Our unique U-shape steel bar cradles the trucks to securely hold your board in place, while the rubber dip coating prevents the bar from scratching your board. The Display Mount’s minimal design won’t take up a lot of space allowing you to mount it just about anywhere for easy grab ’n go access. So get your favorite boards off the ground and…cruise, DISPLAYit, repeat!

Crimson-AV JR3 SyncPro Projector Mount

Project like a Pro

Mounting your projector on the ceiling is one of the quickest and easiest ways to clear up clutter and create a polished, professional look in your home theater. There are many options when it comes to selecting a projector mount, and it can sometimes be difficult to determine which one you need. Crimson AV’s JR3 SyncPro universal projector mount eliminates much of the guesswork involved in purchasing a mount and even offers unparalleled flexibility during the mounting process. With several points of adjustment, this projector mount allows for complete customization.

Universal Care

Attaching anything to the ceiling can seem like a challenge, but with the JR3 SyncPro mount, security and installation are never a concern. Crafted from aluminum and high-grade cold-rolled steel, this mount is rated for a projector weight of up to 70 lbs. The wide 13.8” mounting pattern also makes it compatible with a huge range of home and professional projectors. A sturdy, classic scratch-resistant epoxy powder coat helps protect the mount itself from unsightly scratches that might occur during installation or wear and tear.

The Crimson AV JR3 SyncPro Universal Projector Mount screws easily onto any 1.5” NPT threaded pipe. Once installed, changes can be made to the angle of the projector to best aim, focus, and tweak the picture you desire, which makes it perfect for larger projectors or ones with an off-center lens. This mount can be tilted, twisted, and even turned by a series of large easy-to-turn knobs located on the sides. These screws allow for the most precise fine-tuning possible without complication or risk. Need to change a bulb or service your machine? All of your adjustments are safe and sound thanks to a unique easy-release mechanism.

Rhino Brackets Fixed TV Mount for 60-100" Screens

The large low profile fixed wall mount can accommodate most 60"-100" LED, LCD Flat Panel TVs with a maximum weight of 165lbs/75kgs.The applicable screen size is almost twice as large as that classic ones. Slim design sits just 30.5mm from wall to complement the sleek look of ultra-thin TVs. Its automatically click-in spring lock with easily-release cord easily and securely attaches flat panels to wall. Compatible with VESA hole up to 900x600. In addition, it's suitable for curved TV. Simple construction enables easy installation.

* Note: Supported screen size is provided as a reference only. Please check the bracket dimensions above and make sure the overall bracket size does not exceed your TV.

Heckler Camera Mount for Huddly Go & Huddly IQ

Quickly deploy Huddly GO & Huddly IQ cameras with ADA compliance in huddle rooms throughout the enterprise.

Any angle. You pick.

With its patented ball joint you can lock in the perfect camera angle.

Get creative.

We know your installations can present new mounting challenges. ADA Camera Mount enables you to mount your favorite camera to most any surface, right-side-up, or inverted.

Cable management included.

Optionally pass Huddly's USB-C cable through your wall without hassle. Just route the cable through a 1/2-inch hole. Our mount trims and hides the hole.

ADA compliance built-in.

Safely install at any height in any location. ADA Camera Mount is carefully designed to prevent your camera from protruding more than four inches from the wall.

Ceiling Solutions

There are many reasons why an installer or homeowner would choose to mount their television or projector to the ceiling. Space limitations are often a concern, and sometimes your available walls aren’t constructed to hold enough weight. For many nonstandard rooms or arrangements, ceiling mounting is the best option. In addition to the mount itself, you may need other accessories. With higher ceilings, drop poles and extension columns are usually necessary. The Crimson AV E1 E-Series Fixed Length Extension Column can be used to close the gap between the ceiling and your viewing field.

Fixed Extensions

The Crimson AV E1 is a stationary 1’ drop pole for use with any of Crimson AV’s ceiling mounts and adapters. The 1.5” NPT interface means it can also be used with many other universally compatible mounts as well. Used with Crimson AV’s EC connectors, this column can be coupled with other E-Series extensions to create extra-long drop lengths. The E-Series features fixed ceiling mount extension products from 6 inches to 10 feet, presenting the opportunity for an endless number of custom drop lengths.

The E1 makes cable routing and organization easy with its round, open design. The column and the side cable outlet are both large enough to fit the head of a standard VGA connector. When the cable outlet isn’t in use, you can use the included cover plate to camouflage the opening. This extension column is rated to hold a weight of up to 800lbs and is coated in a scratch-resistant finish so you can be sure it will stand up to years of use while staying strong and looking sleek.

Mounting Questions

Where to mount the projector is one of the first questions new or prospective projector-buyers have to ask themselves. Desks, tables, and walls are all options but one of the most popular means for mounting a projector for display is to mount it on the ceiling. This method is frequently favored for the uncluttered and professional look it adds to any home theater or office. Much like mounting anything else, what you need depends on what you have to work with. There are just as many variations in ceilings are there are on walls and before you start any installation process you want to make sure you have everything you need to complete it. The Crimson AV EC1 Pipe Connector is one piece of the ceiling mount puzzle you may need to complete your installation.

Keep it Up

Sometimes, especially with taller and vaulted ceilings, the distance from the ceiling to the projector screen can be quite long and just one length of drop pipe isn’t enough. The Crimson AV EC1 is manufactured for use in attaching two or more extension columns together to form a longer continuous drop. The finely machined internal threading allows for the easiest installations possible. Crafted from quality steel and coated in a scratch-resistant epoxy powder, neither strain nor scrapes will wear this adapter down. It is rated to withstand weights of up to 500lbs.

Compatible with ceiling extensions, components, and accessories with a 1.5” NPT interface, the Crimson AV EC1 threaded pipe will fit seamlessly with an almost endless combination of mounts, fittings, and fixtures. Mix and match drop pipe extensions to achieve custom lengths. This flush mount pipe can be used with any of Crimson AV’s fixed or adjustable ceiling drop pipes to achieve the final extension length you desire.

No Stud Floating Shelf

The No Stud Floating Shelf allows you to easily decorate your home with minimal damage and strong holding power! Hang it in minutes on any drywall, plaster or paneled wall. Built with our patented no stud system, this innovative shelf mounts flush against the wall using tiny nails and an aircraft-grade aluminum bracket. Once installed, the shelf holds up to 20 pounds and will not sag! Don’t worry about the studs. Just pick your spot and hang it! All hardware is included. All you need is a hammer!

No Stud Technology™ was designed with one goal in mind — easier is better. All of Hangman's products have easy-to-follow instructions and require only one tool; a hammer. Our first goal was to remove the headache that often plagues hanging wall decor.

Hangman's No Stud Technology™ uses tiny nails and aircraft grade aluminum brackets to hang anything flush and secure to the wall. The built-in bubble level track makes sure the installation is level every time. The No Stud Wall Bracket guides the nails into the wall at the precise angle that eliminates the need for wall studs.

The No Stud Wall Bracket also boasts an impressively strong holding power. Hangman's customers have been able to hang almost anything with peace of mind.

The No Stud™ product line solves another headache: wall damage. Utilizing only one inch wire nails, these products leave virtually no damage once removed.

Universal TV Mounting Hardware :

Universal TV Mount hardware kit, Fits most TV's includes screws, washers and spacers, assortment for mounting most TV's.

Kit Includes :

Washers:

D4/D5 (x4)
D6/D8 (x4)

Spacers :

15mm (x4)

Mounting Questions

Where to mount the projector is one of the first questions new or prospective projector-buyers have to ask themselves. Desks, tables, and walls are all options but one of the most popular means for mounting a projector for display is to mount it on the ceiling. This method is frequently favored for the uncluttered and professional look it adds to any home theater or office. Much like mounting anything else, what you need depends on what you have to work with. There are just as many variations in ceilings are there are on walls and before you start any installation process you want to make sure you have everything you need to complete it. The Crimson AV EC2 Pipe Connector with Opening is one piece of the ceiling mount puzzle you may need to complete your installation.

Keep it Up

Sometimes, especially with taller and vaulted ceilings, the distance from the ceiling to the projector screen can be quite long and just one length of drop pipe isn’t enough. The Crimson AV EC2 is manufactured for use in attaching two or more extension columns together to form a longer continuous drop. The finely machined internal threading allows for the easiest installations possible and the wide opening leaves plenty of room for running cables through the connector. Crafted from quality aluminum and coated in a scratch-resistant epoxy powder, neither strain nor scrapes will wear this adapter down. It is rated to withstand weights of up to 300lbs.

Compatible with ceiling extensions, components, and accessories with a 1.5” NPT interface, the Crimson AV EC2 threaded pipe will fit seamlessly with an almost endless combination of mounts, fittings, and fixtures. Mix and match drop pipe extensions to achieve custom lengths. This flush mount pipe can be used with any of Crimson AV’s fixed or adjustable ceiling drop pipes to achieve the final extension length you desire.

Universal Tilt, Post Installation Leveling

Adjustable tilt wall mount from Crimson AV features a universal hole pattern to fit a variety of flat panel screens. Smooth tilt adjustments of 15°forward and 5°back with a locking knob for multiple viewing angles. Post installation leveling allows for perfect screen postion even when ceiling is uneven. Pre-installed securing screws are included and be used as a theft deterrent. Open wall plate design allows for easy access to wires and cables.

Mounting Questions

Where to mount the projector is one of the first questions new or prospective projector-buyers have to ask themselves. Desks, tables, and walls are all options but one of the most popular means for mounting a projector for display is to mount it on the ceiling. This method is frequently favored for the uncluttered and professional look it adds to any home theater or office. Much like mounting anything else, what you need depends on what you have to work with. There are just as many variations in ceilings are there are on walls and before you start any installation process you want to make sure you have everything you need to complete it. The Crimson AV CA8HD Heavy Duty 8x8 Inch Ceiling Adapter for Long Drops is one piece of the ceiling mount puzzle you may need to complete your installation.

Keep it Up

The Crimson AV CA8 is manufactured for use in attaching a projector ceiling mount a solid structural ceiling, wood joists, or some standard unistruts. It can attach to structural wood by itself or to a unistrut or structural concrete with the required additional accessories. This adapter is specially designed to stand up to the stress of extra-long extension drops with an hole pattern staggered to reduce strain and stabilization along the sides. Crafted from high-grade cold rolled steel and coated in a scratch-resistant epoxy powder, neither strain nor scrapes will wear this adapter down.

Built to last, the Crimson AV CA8HD is rated to withstand weights of up to an incredible 500lbs. Compatible with ceiling extensions, components, and accessories with a 1.5” NPT interface, this general purpose ceiling adapter will fit seamlessly with an almost endless combination of mounts , fittings, and fixtures.

Crimson-AV Ceiling TV Mount for 37-63" Screen

The Crimson-AV C63-60A Complete Ceiling TV Mount Installation Kit is a universal ceiling mount designed for flat-panel TVs with 37 to 75-inch screens. The universal, VESA compatible mounting pattern ensures it fits most TV makes and models.

The column with built-in cable management can be adjusted in one-inch increments to reach from 36 to 60 inches. With tool-free post-installation leveling, 20-degree downward tilt, and 360-degree swivel, achieving the perfect viewing angle is a breeze.

Constructed of high-grade cold-rolled steel with a scratch-resistant epoxy powder coat finish, this mount is designed to provide years of hassle-free viewing.

ClickShare Button Mount

With the HIDEit CSE Barco ClickShare Button Mount, Clutter Free meetings are here to stay! This ClickShare Button Mount neatly stores up to two Buttons and is the perfect accessory to the HIDEit CSE Barco Mount. Finally, no more searching for presentation equipment! VESA mount or wall mount your ClickShare Buttons near the Barco device for an organized setup and easy access. Give your Buttons a home with the HIDEit CSE Barco ClickShare Button Mount.

Universal fixed mount for 46" to 100" flat panel screens. Low Profile, Universal Design

Adjustable flat wall mount with Universal hole pattern from Crimson AV is designed to fit a wide variety of flat panel screens. The F80A makes a secure installation quick and easy. Post-installation leveling allows for perfect screen positioning even when the ceiling is uneven. "Click in Place" screen placement requires no tools to secure the screen to the wall. Open wall plate design and kickstand feature provides easy access to wiring.

Barkan 13" - 83" Fixed Floor Stand TV Mount - Swivel, Tilt & Height Adjustment

HIDEit Oculus Quest 2 Wall Mount Bundle

Finish playing Beat Saber and need to store your Oculus Quest 2 VR Headset? The HIDEit Oculus Mounts are the perfect solution to organize your gear and take your setup into a new reality. Avoid bulky VR display stands. Our minimalist design keeps the focus on your VR set and allows you to mount your gear just about anywhere! The Universal Headset Mount safely stores the virtual reality display and the tab keeps it in place to avoid accidental drops or damage. The Oculus Touch Controller Mounts are rubber dipped to prevent sliding and scratches when placing controllers on and off the mounts. Complete your VR setup with the HIDEit Oculus Mounts!

Chief Proximity® In-Wall Storage Box

Proximity in-wall boxes feature multi-level, multi-sectioned Lever Lock plates, making it easier to arrange components in all three dimensions of the storage space. Installers can hide power bricks behind the backplane with equipment mounted to the front. This also helps work around difficult port locations on AV equipment.

The new PAC527L now includes two large tool-free Lever Lock™ plates for quick installation of AV equipment and efficient servicing of the system. Lever Lock™ plates can be mounted on four different levels to easily organize and layer components within the in-wall box. 

Ultra flat and Tilt

Super slim universal design holds flat panel screens only .97 (24.6mm) from the wall. A perfect match for today’s slim TVs. Post-installation leveling feature allows for perfect screen positioning even when a ceiling is not perfectly level. Quick and secure “hook and click”installation with built-in kickstand feature that allows easy access for wiring.

• Post-installation leveling
• Universal design
• VESA compatible
• Ultra-flat design holds screen only 0.97” from wall for a clean look
• Quick and secure “hook and click”installation
• Lateral shift for perfect placement
• Built-in kickstand feature allows easy access for wiring
• Pre-sorted hardware pack for easy installation to wood studs or concrete surfaces included

*Caution: This mount is designed exclusively for ultra-flat TV's and places the screen extremely close to the wall. Please refer to your TV's owner's manual for ventilation requirements for your particular television. Use of spacers may be required for proper ventilation.

j5create Multi-Angle Laptop Stand

Made with durable aluminum, this multi-angle stand can support a variety of items including a laptop, tablet, book, etc. Its convenient foldable design makes storage and transport easy in addition to giving you the ability to adjust the viewing angle and height to fit your needs. This versatile stand gives you the ability to create a more efficient workspace, whether you need extra space or a standing desk setup.

HIDEit PS5 Sony PlayStation 5 Mount

Give your PlayStation 5 an amazing free-floating look with the HIDEit PS5 Mount! Its innovative design fits the PS5 Disc and PS5 Digital Editions! Our mount is made from heavy gauge steel and uses the center channel of the PS5 and Sony’s Secure Mounting Mechanism to ensure your console is securely mounted. The HIDEit PS5 Mount won’t block any vents and our unique hook feature secures your console for a flush install without any added bulk. So mount your PlayStation 5 today!

HIDEit VBat Vertical Baseball Bat Mount

Complete the baseball decor in your office or bedroom by making your favorite bat the center of attention! Proudly display your collectible baseball bat or memorabilia bat with our Vertical Baseball Bat Wall Mount. The HIDEit VBat Mount is a sleek, durable storage solution for displaying your vintage bat, autographed bat, game used bat, antique bat, or MLB bat.

Need a spot to display your autographed baseball? The universal design will hold an official MLB baseball or a softball and ribbed tabs ensure your ball stays in place while it rests in the wide opening. Let HIDEit help you create the ultimate setup for your sporting goods with the HIDEit VBat!

Mounting Questions

Where to mount the projector is one of the first questions new or prospective projector-buyers have to ask themselves. Desks, tables, and walls are all options but one of the most popular means for mounting a projector for display is to mount it on the ceiling. This method is frequently favored for the uncluttered and professional look it adds to any home theater or office. Much like mounting anything else, what you need depends on what you have to work with. There are just as many variations in ceilings are there are on walls and before you start any installation process you want to make sure you have everything you need to complete it. Crimson CA4 General Purpose 4x4 Inch Ceiling Adapter is one piece of the ceiling mount puzzle you may need to complete your installation.

Keep it Up

The Crimson AV CA4 is manufactured for use in attaching a projector ceiling mount a solid structural ceiling or some standard unistruts. It can attach to structural wood by itself or to a unistrut or structural concrete with the required additional accessories. This adapter is made to stand up to the demands of almost any ceiling mount. Crafted from high-grade cold rolled steel and coated in a scratch-resistant epoxy powder, neither strain nor scrapes will wear this adapter down.

Built to last, the Crimson AV CA4 is rated to withstand weights of up to an incredible 300lbs. Compatible with ceiling extensions, components, and accessories with a 1.5” NPT interface, this general purpose ceiling adapter will fit seamlessly with an almost endless combination of mounts , fittings, and fixtures.

Ceiling Solutions

There are many reasons why an installer or homeowner would choose to mount their television or projector to the ceiling. Space limitations are often a concern, and sometimes your available walls aren’t constructed to hold enough weight. For many nonstandard rooms or arrangements, ceiling mounting is the best option. In addition to the mount itself, you may need other accessories. With higher ceilings, drop poles and extension columns are usually necessary. The Crimson AV EA24 EA-Series Adjustable Length Extension Column can be used to close the gap between the ceiling and your viewing field.

Adjustable Extensions

The Crimson AV EA24 is an adjustable 2-4' drop pole for use with any of Crimson AV’s ceiling mounts and adapters. The 1.5” NPT interface means it can also be used with many other universally compatible mounts as well. Used with Crimson AV’s EC connectors, this column can be coupled with other EA-Series extensions to create extra-long drop lengths. The EA-Series features adjustable ceiling mount extension products from 6 inches to 12 feet, presenting the opportunity for an endless number of custom drop lengths.

The EA24 makes cable routing and organization easy with its round, open design. The column and the side cable outlet are both large enough to fit the head of a standard VGA connector. When the cable outlet isn’t in use, you can use the included cover plate to camouflage the opening. This extension column is rated to hold a weight of up to 500lbs and is coated in a scratch-resistant finish so you can be sure it will stand up to years of use while staying strong and looking sleek.

Mounting Questions

Where to mount the projector is one of the first questions new or prospective projector-buyers have to ask themselves. Desks, tables, and walls are all options but one of the most popular means for mounting a projector for display is to mount it on the ceiling. This method is frequently favored for the uncluttered and professional look it adds to any home theater or office. Much like mounting anything else, what you need depends on what you have to work with. There are just as many variations in ceilings are there are on walls and before you start any installation process you want to make sure you have everything you need to complete it. The Crimson AV E04 Fully Threaded Flush Mount Pipe is one piece of the ceiling mount puzzle you may need to complete your installation.

Keep it Up

The Crimson AV E04 is manufactured for use in attaching a projector ceiling mount to a ceiling adapter plate. When you want a close and flush look, the 4” length of this pipe is ideal. The finely machined external threading allows for the easiest and tightest installations possible. Crafted from quality steel and coated in a scratch-resistant epoxy powder, neither strain nor scrapes will wear this adapter down. It is rated to withstand weights of up to 500lbs.

Compatible with ceiling extensions, components, and accessories with a 1.5” NPT interface, the Crimson AV E04 threaded pipe will fit seamlessly with an almost endless combination of mounts, fittings, and fixtures. This flush mount pipe can be used with any of Crimson AV’s ceiling mounts and ceiling adapters to achieve the compact look you desire. It can also be used to connect to an extension arm for a more flexible fixture.

Peerless-AV Precision Projector Mount with Spider

The Peerless-AV PRG-UNV Precision Projector Mount with Spider Universal Adapter Plate offers precise image alignment through the use of two simple adjustment knobs. It comes pre-assembled to save installation time, and the advanced cable management allows interior routing, with a U-shaped pitch bracket for hassle-free cable concealment.

The Spider Universal Adapter Plate included with this projector mount extends it up to 17.63" to fit most projector models.

Articulating Projector Ceiling Mount

Get all the bells and whistles with this universal fit projector ceiling mount! This mount fits most projectors weighing up to 22 pounds. It's ideal for installations in conference rooms, classrooms, healthcare facilities, or home theaters! With full articulating motion, you can achieve the perfect viewing angle. This mount tilts up to fifteen degrees upward or downward and rotates 360 degrees. You'll be able to project exactly where you need to.

Mounts above false ceiling tile on standard 2x2’ or 2x4’ grid system. Comes complete with 4" extension pipe and is compatible with all standard 1.5" NPT interfaces weighing up to 60lb. Includes hardware to suspend from wood or concrete surfaces.

Project like a Pro

Mounting your projector on the ceiling is one of the quickest and easiest ways to clear up clutter and create a polished, professional look in your home theater. There are many options when it comes to selecting a projector mount, and it can sometimes be difficult to determine which one you need. Crimson AV’s JR3 SyncPro universal projector mount eliminates much of the guesswork involved in purchasing a mount and even offers unparalleled flexibility during the mounting process. However, for larger projectors, the mounting hole pattern may not be large enough. When you need a wider footprint to go with your projector, the Crimson AV ADJR3 Adapter Extender is exactly what you need.

Universal Care

Attaching anything to the ceiling can seem like a challenge, but with the ADJR3 mount adapter, security and installation are never a concern. Crafted from aluminum and high-grade cold-rolled steel, this mount is rated for a projector weight of up to 70 lbs. The adapter extends the mounting pattern from 13.8” to up to 21.13” to accommodate larger and wider projectors. A sturdy, classic scratch-resistant epoxy powder coat helps protect the mount itself from unsightly scratches that might occur during installation or wear and tear.

The Crimson AV ADJR3 Adapter Extender attaches easily to the JR3 projector mount. Once installed, changes can be made as normal to the roll, pitch, and yaw of the projector mount itself.

Peerless-AV ACC925 Security Fasteners provide theft resistance for Peerless flat panel mounts with VESA compatibility of 200x200 and 800x400.