Your Cart

Free Shipping on Orders > $99.99 - *Some Exclusions May Apply

expand/collapse
(704) 979-7100 (0)
  • Rhino Brackets Articulating Curved and Flat Panel Single Stud TV Wall Mount w/ In-Wall Wire Hider Kit for 32-55 Inch Screens
  • Rhino Brackets Articulating Curved and Flat Panel Single Stud TV Wall Mount w/ In-Wall Wire Hider Kit for 32-55 Inch Screens
  • Rhino Brackets Articulating Curved and Flat Panel Single Stud TV Wall Mount w/ In-Wall Wire Hider Kit for 32-55 Inch Screens
  • Rhino Brackets Articulating Curved and Flat Panel Single Stud TV Wall Mount w/ In-Wall Wire Hider Kit for 32-55 Inch Screens
  • Rhino Brackets Articulating Curved and Flat Panel Single Stud TV Wall Mount w/ In-Wall Wire Hider Kit for 32-55 Inch Screens
  • Rhino Brackets Articulating Curved and Flat Panel Single Stud TV Wall Mount w/ In-Wall Wire Hider Kit for 32-55 Inch Screens
  • Rhino Brackets Articulating Curved and Flat Panel Single Stud TV Wall Mount w/ In-Wall Wire Hider Kit for 32-55 Inch Screens
  • Rhino Brackets Articulating Curved and Flat Panel Single Stud TV Wall Mount w/ In-Wall Wire Hider Kit for 32-55 Inch Screens
  • Rhino Brackets Articulating Curved and Flat Panel Single Stud TV Wall Mount w/ In-Wall Wire Hider Kit for 32-55 Inch Screens
  • Rhino Brackets Articulating Curved and Flat Panel Single Stud TV Wall Mount w/ In-Wall Wire Hider Kit for 32-55 Inch Screens
  • Rhino Brackets Articulating Curved and Flat Panel Single Stud TV Wall Mount w/ In-Wall Wire Hider Kit for 32-55 Inch Screens

Rhino Brackets Articulating Curved and Flat Panel Single Stud TV Wall Mount w/ In-Wall Wire Hider Kit for 32-55 Inch Screens

SKU#: LPA3RB6-443-KIT

UPC#: 790910482637

60 Day Money Back Guarantee

100% Secure Shopping

SKU#: LPA3RB6-443-KIT

UPC#:790910482637
$65.18

SKU#: LPA3RB6-443-KIT

UPC#:790910482637

Same Day Shipping likely on orders placed in the next 00 hours 00 minutes 00 seconds.

Califonia Warning 65

California Prop 65 Warning

×
For CA Residents Only.
California Proposition 65 Warning

Proposition 65, officially the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more that 850 chemicals. In August 2016, OEHHA adopted new regulations, effective on August 30, 2018, which change the information required in Proposition 65 warnings.

• WARNING: Some cable, plastic, and metal products may contain chemicals known to the state of CA to cause cancer, birth defects, or other reproductive harm.

For further information, please visit www.P65Warnings.ca.gov

  • Description+
  • Rhino Brackets Articulating Curved and Flat Panel Single Stud TV Wall Mount w/ In-Wall Wire Hider Kit for 32-55 Inch Screens

     Note: This product has been discontinued and replaced by LPA3RB6-443A-KIT.

    This single-armed articulating TV wall mount from Rhino Brackets is designed to fit both curved and flat panel screens. It mounts to a single stud, offering more flexibility when choosing a location to place the TV. It swivels up to 90 degrees and tilts to achieve optimal viewing angles.

    Integrated cable management ensures wires are carefully concealed and organized behind the TV. The universal mounting pattern is VESA compliant and fits most TVs measuring 32 to 55 inches.

    A DIY Dream

    You're strong, independent, and you want to knock this TV hang out in a weekend, right? This TV wall mount kit is the perfect all-in-one solution for the do-it-yourselfer who's on a budget and a mission. All the components of a professional TV mounting job are included - just add tools and you're in business!

    This kit includes our best-selling Rhino Brackets articulating TV wall mount for 32-55 inch flat / curved screens.

    Out of Sight, Out of Mind

    Hide those unsightly cables with the included Arlington low voltage brackets and Garvin recessed low voltage cable plates. The brackets attach securely to drywall with screw-down clamps, while the bulk cable plates screw directly onto the brackets and offer a convenient cable pass through. There is a fifteen foot NetStrand High Speed HDMI 2.0 cable included, but you can run your other low-voltage cables along with it.

    What You'll Need

    All the components are included in the kit, but you will need some tools. You will need a level, screwdriver, pencil for marking off your wall plate cuts, and a drywall saw or utility knife to cut openings for your low voltage brackets. A drill might also come in handy.

  • Features+
    • ALL-IN-ONE. Get everything you need to hang your TV and hide your cables in one kit. Just add tools.
    • EASY TO INSTALL. With no scary electrical wiring required, this makes a great DIY project.
    • CLEAN, PROFESSIONAL LOOK. Hide wires in the wall like the pros. Nothing to see here, folks.
    • FIREFOLD SIGNATURE LIFETIME WARRANTY. Years of trouble-free performance lie ahead.
    • FREE SHIPPING. Free economy shipping anywhere in the continental US. Doesn't get any better than this!
    • Mounts a 32-55" HDTV to a Single Stud
    • Swivel Arm and Tilt for Maximum View Flexibility
    • Strength Tested to 3x Stated Load Capacity
    • Built-in Cable Management Keeps Wires Concealed and Organized
  • Specs+
    • Material: Steel
    • Finish: Powder Coat
    • Pipe Size: 40 x 20 x 1.5mm
    • Dimensions: 473 x 480 x 430mm
    • Compatibility: 32-55" Flat Panel Screens
    • Installation: Solid Wall, Single Stud
    • Weight Capacity: 110 lbs
    • Max Hole Pattern: 426 x 400mm
    • VESA Compatibility: 200x200,400x200,300x300,400x400
    • Tilt: -20°~+10°
    • Swivel: -90°~+90°
    • Level Adjustment: -3°~+3°
    • Profile: 60-473mm
    • Integrated Cable Management
    • Color: Black
  • Package Contents+
  • Reviews+
  • Q&A+
  • Will this fit my TV?

    This will fit most 32-55" TVs. Please make sure your TV's mounting pattern is 400x400 or smaller and your TV weighs 110 lbs or less.

    How far can this pull out from the wall?

    This will pull out 18.6 inches from the wall.

    Will I need anything else?

    You may need additional hardware if your TV uses a different screw size or if you are mounting to anything other than studs. You will also want an electric screwdriver with a drill bit and a stud finder. A drop cloth to cover your carpet or furniture may help, and a separate level can be a good idea as well.

    What is a VESA pattern?

    VESA pattern is the mounting pattern. There are several different sizes used by manufacturers. It is the measurement between mounting holes side to size and then up and down. This measurement will always be in millimeters.

    What are the dimensions on the mount?

    The plate that attaches to the wall is 3 inches wide and 9.5 inches tall. The plate behind the TV is 18.9 inches wide and 6.3 inches tall. The arms are 16.9 inches long.

    Does this tilt or swivel?

    This mount will tilt, swivel, and pull out from the wall.

    Can you mount this on brick, plaster, or stone?

    This mounting kit includes hardware to mount on drywall over studs and concrete. With special tools and hardware, you may be able to mount on other surfaces. Please consult an installation professional if you are unsure about how to mount in your home.

    Will this work with a curved TV?

    Yes, it will. It comes with a variety of spacers to accommodate for a curve.

    How far away from the wall does this sit?

    This mount will sit 2.4 to 18.6 inches from the wall.

    Rhino Brackets Articulating Curved and Flat Panel Single Stud TV Wall Mount w/ In-Wall Wire Hider Kit for 32-55 Inch Screens

     Note: This product has been discontinued and replaced by LPA3RB6-443A-KIT.

    This single-armed articulating TV wall mount from Rhino Brackets is designed to fit both curved and flat panel screens. It mounts to a single stud, offering more flexibility when choosing a location to place the TV. It swivels up to 90 degrees and tilts to achieve optimal viewing angles.

    Integrated cable management ensures wires are carefully concealed and organized behind the TV. The universal mounting pattern is VESA compliant and fits most TVs measuring 32 to 55 inches.

    A DIY Dream

    You're strong, independent, and you want to knock this TV hang out in a weekend, right? This TV wall mount kit is the perfect all-in-one solution for the do-it-yourselfer who's on a budget and a mission. All the components of a professional TV mounting job are included - just add tools and you're in business!

    This kit includes our best-selling Rhino Brackets articulating TV wall mount for 32-55 inch flat / curved screens.

    Out of Sight, Out of Mind

    Hide those unsightly cables with the included Arlington low voltage brackets and Garvin recessed low voltage cable plates. The brackets attach securely to drywall with screw-down clamps, while the bulk cable plates screw directly onto the brackets and offer a convenient cable pass through. There is a fifteen foot NetStrand High Speed HDMI 2.0 cable included, but you can run your other low-voltage cables along with it.

    What You'll Need

    All the components are included in the kit, but you will need some tools. You will need a level, screwdriver, pencil for marking off your wall plate cuts, and a drywall saw or utility knife to cut openings for your low voltage brackets. A drill might also come in handy.

    • ALL-IN-ONE. Get everything you need to hang your TV and hide your cables in one kit. Just add tools.
    • EASY TO INSTALL. With no scary electrical wiring required, this makes a great DIY project.
    • CLEAN, PROFESSIONAL LOOK. Hide wires in the wall like the pros. Nothing to see here, folks.
    • FIREFOLD SIGNATURE LIFETIME WARRANTY. Years of trouble-free performance lie ahead.
    • FREE SHIPPING. Free economy shipping anywhere in the continental US. Doesn't get any better than this!
    • Mounts a 32-55" HDTV to a Single Stud
    • Swivel Arm and Tilt for Maximum View Flexibility
    • Strength Tested to 3x Stated Load Capacity
    • Built-in Cable Management Keeps Wires Concealed and Organized
    • Material: Steel
    • Finish: Powder Coat
    • Pipe Size: 40 x 20 x 1.5mm
    • Dimensions: 473 x 480 x 430mm
    • Compatibility: 32-55" Flat Panel Screens
    • Installation: Solid Wall, Single Stud
    • Weight Capacity: 110 lbs
    • Max Hole Pattern: 426 x 400mm
    • VESA Compatibility: 200x200,400x200,300x300,400x400
    • Tilt: -20°~+10°
    • Swivel: -90°~+90°
    • Level Adjustment: -3°~+3°
    • Profile: 60-473mm
    • Integrated Cable Management
    • Color: Black

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    Will this fit my TV?

    This will fit most 32-55" TVs. Please make sure your TV's mounting pattern is 400x400 or smaller and your TV weighs 110 lbs or less.

    How far can this pull out from the wall?

    This will pull out 18.6 inches from the wall.

    Will I need anything else?

    You may need additional hardware if your TV uses a different screw size or if you are mounting to anything other than studs. You will also want an electric screwdriver with a drill bit and a stud finder. A drop cloth to cover your carpet or furniture may help, and a separate level can be a good idea as well.

    What is a VESA pattern?

    VESA pattern is the mounting pattern. There are several different sizes used by manufacturers. It is the measurement between mounting holes side to size and then up and down. This measurement will always be in millimeters.

    What are the dimensions on the mount?

    The plate that attaches to the wall is 3 inches wide and 9.5 inches tall. The plate behind the TV is 18.9 inches wide and 6.3 inches tall. The arms are 16.9 inches long.

    Does this tilt or swivel?

    This mount will tilt, swivel, and pull out from the wall.

    Can you mount this on brick, plaster, or stone?

    This mounting kit includes hardware to mount on drywall over studs and concrete. With special tools and hardware, you may be able to mount on other surfaces. Please consult an installation professional if you are unsure about how to mount in your home.

    Will this work with a curved TV?

    Yes, it will. It comes with a variety of spacers to accommodate for a curve.

    How far away from the wall does this sit?

    This mount will sit 2.4 to 18.6 inches from the wall.

Open Google Reviews for our website ×