Home Theater USA Made Products

Quest Premier Raceway on a Roll 

Cover Your Tracks

The Premier Raceway FWF-14511 Cable Cover on a Roll is your shortcut to a tidy entertainment center. This 50ft long strip is 3/8" wide and it comes in a clean, convenient pizza box-sized dispenser. Installation of this cord cover is simple and only takes a few minutes, and the unique pull box allows you to cut just the right length of Raceway. This wire cover features a flat one-piece design that makes it especially easy to manage. Once you've cut off the length of strip you need, simply fold the base to create a channel for your cords. Ridges allow the duct shape to snap easily into place. You can either fold up the Raceway before it is mounted or after. The solvent-based adhesive foam tape on the back makes for a simple peel-and-stick mounting process. This cable cover is made of strong, durable flame-retardant PVC with a UV stabilizer to keep the color pure. Raceway is only available in white, but it can be easily painted to the color of your choice.

Platinum Tools Cat6 RJ45 EZ-RJ45 Connector 50pk

As anyone who has ever planned their network knows, terminating Ethernet cables isn’t necessarily hard. It can be a tedious process, though, and it is critical to speed and functionality to get it correct. If you have a lot of cables to connect or if you’re a network professional, the amount of time spent on getting conductors just right can be frustrating and even wasteful. You have to measure carefully to ensure you are clipping the precise length of wire to fit snugly into your connector and often you have to assume your pins have stayed in the right order before you crimp them.

Platinum Tools, a leading designer and manufacturer of network wiring instruments, has created a patented EZ system to eliminate many of the headaches associated with those tiny connectors. Product number 100010C is a 50-pack of Cat6 EZ-RJ45 connectors. These connectors can be used with most ordinary crimpers, but the full benefits can only be experienced when used with an EZ-RJ45 crimp tool.

The Difference

The initial steps for adding an EZRJ45 connector onto a Cat6 Ethernet cable is the same. You score the outer jacket and remove an inch and a half, snipping the pull thread to get it out of your way once you have enough of the conductors exposed. Untwist the pairs and line them up according to your chosen wiring diagram. Then, instead of measuring where you need to snip off the excess wire, you skip straight to inserting the cable into the connector. Thanks to the all-transparent pull-through design, you can quickly check to make sure the correct wire pin-out has been maintained by checking the wires that have come out the end of the connector and by looking into the body of the connector itself. Once everything is lined up properly, crimp the connector on. The EZ-RJ45 tool will crimp and cut away the extra wire all in one squeeze.

LVDR2 Bracket

Streamline and simplify your retrofit project with Arlington’s LVDR2. This box allows you to combine one electrical and one low-voltage run into a single location, creating a clean look without any extra work. Designed for use with pre-existing construction, this combo bracket uses flip-up wings to stay fixed against the drywall. The tightening screw is easily accessible from the front of the bracket and the wings can adjust to accommodate drywall, paneling, and other materials up to 1.5” in thickness.

The power side of the LVDR2 includes a connector for Romex or other non-metallic electrical cables. On the low voltage side there are also knock-outs for conduit and raceway cable management covers- one ½” and one ¾”. These UL-listed combination boxes come in a standard two-gang size and can fit a variety of split power and low voltage wall plates for installation convenience.

Arlington Nail On Low Voltage Mounting Bracket

LVN Bracket

Install your low voltage cables in a fraction of the time with the Arlington LVN Nail-On Mounting Bracket. The non-metallic, non-conductive, plastic construction makes them perfect for Class 2 networking and audio-video cabling runs. Designed for bare wood studs in new construction areas, these brackets come with a pair of angled captive nails and arrive ready to install. Simply tap the nails into the side of the exposed stud and you’re done.

They include a molded loop for tying off wires and a side tab for added stability. The unique side-fastening nail-in process also increases accuracy by decreasing pushback. The LVN low voltage mounting bracket is for use with standard wallplates and faceplates. These nail-in style boxes are also available in two, three, and four-gang configurations. They are UL listed and CSA rated for low voltage use and are not compatible with electrical wiring.

Platinum Tools Cat5E EZ-RJ45 Connector

As anyone who has ever planned their network knows, terminating Ethernet cables isn’t necessarily hard. It can be a tedious process, though, and it is necessary to speed and functionality to get it correct. If you have a lot of cables to connect or if you’re a network professional, the amount of time spent on getting conductors just right can be frustrating and even wasteful. You have to measure carefully to ensure you are clipping the precise length of wire to fit snugly into your connector and often you have to assume your pins have stayed in the right order before you crimp them.

Platinum Tools, a leading designer and manufacturer of network wiring instruments, has created a patented EZ system to eliminate many of the headaches associated with those tiny connectors. Product number 100003C is a pack of Cat5E EZ-RJ45 connectors for Cat5E installations. These connectors can be used with most ordinary crimpers, but the full benefits can only be experienced when used with an EZ-RJ45 crimp tool.

The Difference

The initial steps for adding an EZRJ45 connector onto a Cat5E Ethernet cable is the same. You score the outer jacket and remove an inch and a half, snipping the pull thread to get it out of your way once you have enough of the conductors exposed. Untwist the pairs and line them up according to your chosen wiring diagram. Then, instead of measuring where you need to snip off the excess wire, you skip straight to inserting the cable into the connector. Thanks to the all-transparent pull-through design, you can quickly check to make sure the correct wire pinout has been maintained by checking the wires that have come out the end of the connector and by looking into the body of the connector itself. Once everything is lined up properly, crimp the connector on. The EZ-RJ45 tool will crimp and cut away the extra wire all in one squeeze.

Quest Raceway Wire Hider | Cable Concealer 

In Hiding

What’s better than enjoying the low cost and high quality of FireFold’s extensive cable collection? Not having to see those cables running from your television! The easiest way to hide your wires from sight is the FWH-12411 from Quest. This premiere WireHider offers a professional look without the hassle of using wall plates. One inch wide, the four-foot strip of Raceway can accommodate several standard-size cables. There’s no need to be able to fit the bulky connectors through or wrestle to snap the cover back into place. A nearly invisible slit runs from end to end, allowing you to simply push your cables into place.

The FWH-12411 attaches to your wall by a strip of peel-and-stick adhesive. It is usually easier to run your cables through the WireHider after it is mounted to the wall or floor, but you can always add or remove cables easily even after it is set up. This strip is a single straight four-foot run, but it can easily be cut shorter using consumer-grade tools. With other Quest Raceway accessories, you can create curves, corners, and turns for a custom look in your home or business. Molded from smooth ABS plastic, this cable channel cannot be covered with latex paints, but the clean white color blends well with many styles of décor.

Quest Raceway Wire Hider Cover

Put a Lid on it

When paired with the FWH-11411, the FCL-21411 WireHider Cover Lid from Quest helps create the cleanest look in cable management without opening up your wall. It is designed to go on top of the FWH-11411 WireHider cable channel to cover and conceal the flexible slit. It is an optional accessory, but it offers an ultimate layer of professionalism to any cable run. Adding this cover lid to your WireHider is a snap- literally. Once your cable channel is installed and your cables are inside, simply press the lid over the wire molding until it slides into place.

This strip is a single straight four-foot run, but it can easily be cut shorter using consumer-grade tools. With other Quest Raceway accessories, you can create curves, corners, and turns for a custom look in your home or business. This lid is 1/2” wide, so it is only compatible with the 1/2” version of Quest’s WireHider and corner pieces. Molded from smooth ABS plastic, this product cannot be covered with latex paints, but the clean white color blends well with many styles of décor.

LVH1 Bracket

Mount your wall plates vertically or horizontally with Arlington’s LVH1. These non-metallic brackets are ideal for any Class 2 low voltage cable run including AV and networking applications. Designed for new construction, they attach easily to any standard wood or metal stud. With three mounting hole options, these brackets can be oriented in nearly any position with a minimum of adjustment and no increase in installation time. Sturdy side tabs also help stabilize the bracket against the stud, allowing for a secure assembly.

The LVH1 is compatible with any single gang low voltage wall plate including bulk pass-through, keystone, and even decora-style faceplates. They include a molded tie-off slot for your pre-wiring cabling runs. This bracket is for use with low voltage wiring only and is not compatible with electrical runs.

Platinum Tools Shielded Cat5E & Cat6 RJ45 EZ-RJ45 Connector

As anyone who has ever planned their network knows, terminating Ethernet cables isn’t necessarily hard. It can be a tedious process, though, and it is necessary to speed and functionality to get it correct. If you have a lot of cables to connect or if you’re a network professional, the amount of time spent on getting conductors just right can be frustrating and even wasteful. You have to measure carefully to ensure you are clipping the precise length of wire to fit snugly into your connector and often you have to assume your pins have stayed in the right order before you crimp them.

Platinum Tools, a leading designer and manufacturer of network wiring instruments, has created a patented EZ system to eliminate many of the headaches associated with those tiny connectors. Product number 100020 is the single shielded EZ-RJ45 connector. They are fully foil-shielded with an internal ground for interference-sensitive installations. These connectors can be used with most ordinary crimpers, but the full benefits can only be experienced when used with an EZ-RJ45 crimp tool.

The Difference

The initial steps for adding an EZRJ45 connector onto a shielded Ethernet cable is the same. You score the outer jacket and remove an inch and a half, snipping the pull thread to get it out of your way once you have enough of the conductors exposed. Untwist the pairs and line them up according to your chosen wiring diagram. Then, instead of measuring where you need to snip off the excess wire, you skip straight to inserting the cable into the connector. Thanks to the all-transparent pull-through design, you can quickly check to make sure the correct wire pinout has been maintained by checking the wires that have come out the end of the connector and by looking into the body of the connector itself. Once everything is lined up properly, crimp the connector on. The EZ-RJ45 tool will crimp and cut away the extra wire all in one squeeze.

Quest Premiere Raceway Wire Hider Cover

Put a Lid on it

When paired with the FWH-12411, the FCL-22411 WireHider Cover Lid from Quest helps create the cleanest look in cable management without opening up your wall. It is designed to go on top of the FWH-12411 WireHider cable channel to cover and conceal the flexible slit. It is an optional accessory, but it offers an ultimate layer of professionalism to any cable run. Adding this cover lid to your WireHider is a snap- literally. Once your cable channel is installed and your cables are inside, simply press the lid over the wire molding until it slides into place.

This strip is a single straight four-foot run, but it can easily be cut shorter using consumer-grade tools. With other Quest Raceway accessories, you can create curves, corners, and turns for a custom look in your home or business. This lid is 1” wide, so it is only compatible with the 1” version of Quest’s WireHider and corner pieces. Molded from smooth ABS plastic, this product cannot be covered with latex paints, but the clean white color blends well with many styles of décor.

Quest Raceway Right Angles

On a Curve

Designed for use with cable cover systems, the FRA-31412 is a two-pack of right angle adapters that allows you to make a right angle turn against a flat surface. These work especially well with Quest’s Raceway-on-a-Roll and WireHider products. With these adapters, you can create and customize your own unique wire runs to best hide your cords from sight. Cut and position your straight cable cover runs, securing them to the floor or wall as instructed by the manufacturer. Then snap these corner covers easily into place to conceal the wires around the bend.

In addition to providing unparalleled cable management, the FRA-31412 also helps prolong cable life by protecting the cords within from the bumps and scrapes associated with everyday use. Molded from sturdy ABS plastics, these accessories are fire-retardant and UV-stabilized to prevent fading and staining. They are also latex-paintable for the ultimate in color-matching. In addition to these inside corner adapters, there are also options available for outside corners and inside corners.

Quest Premier Raceway on a Roll - 50ft, White

Cover Your Tracks

The Premier Raceway FWF-05511 Cable Cover on a Roll is your shortcut to a tidy entertainment center. This 50’ long strip is 1/2” wide and it comes in a clean, convenient pizza box-sized dispenser. Installation of this cord cover is simple and only takes a few minutes, and the unique pull box allows you to cut just the right length of Raceway. This wire cover features a flat one-piece design that makes it especially easy to manage. Once you’ve cut off the length of strip you need, simply fold the base to create a channel for your cords. Ridges allow the duct shape to snap easily into place. You can either fold up the Raceway before it is mounted or after. The solvent-based adhesive foam tape on the back makes for a simple peel-and-stick mounting process. This cable cover is made of strong, durable flame-retardant PVC with a UV stabilizer to keep the color pure. Raceway is only available in white, but it can be easily painted to the color of your choice.

Quest Premiere Raceway Outside Corners

On a Curve

Designed for use with cable cover systems, these are outside corner adapters. These work especially well with Quest’s Raceway-on-a-Roll and WireHider products. With these corner adapters, you can create and customize your own unique wire runs to best hide your cords from sight. Cut and position your straight cable cover runs, securing them to the floor or wall as instructed by the manufacturer. Then snap these corner covers easily into place to conceal the wires around the bend.

In addition to providing unparalleled cable management, the corner adapters also help prolong cable life by protecting the cords within from the bumps and scrapes associated with everyday use. Molded from sturdy ABS plastics, these accessories are fire-retardant and UV-stabilized to prevent fading and staining. They are also latex-paintable for the ultimate in color-matching. In addition to these outside corner adapters, there are also options available for inside corners and non-corner right angles.

5” Cable Loop

The LOOP is a versatile, low-cost alternative to traditional J-hooks and cable trays. For use with beam clamps in new and existing construction, these flexible non-metallic wire hangers elevate and contain your communications cable without any bending, sagging, or damage. They’re perfect for fiber optic and Cat cables. These cable loops can be mounted parallel or perpendicular to the beam, and they can be stacked to maximize space.

Manufactured by Arlington, the TL50P is a 5” version of The LOOP. It can hold a wire bundle up to 5” in diameter, the equivalent of about 300 Cat5 cables. These patented hoops are also UL listed for use in environmental air handling spaces and they are UV rated to withstand long-term outdoor use. A unique design makes adding, subtracting, or changing the cables in your current run quick and painless. The loop can be unfastened and refastened by lifting the tab off or onto a latch. The LOOP is also available for purchase in a 2” and a 2.5” size.

Arlington TVB2GW Recessed Wall Box

Arlington's non-metallic recessed indoor InBox allows items such as furniture or televisions to be placed closer to the wall. Arlington's InBox uses mounting wings to attach to the wall, so it is ideal for new or retrofit construction. This two gang 34.0 cubic inch InBox comes in white, is cULus listed, and has a two-hour fire rating. It comes with the recessed box, trim plate, wall plates, low voltage divider, and mounting/installation screws.

Quest Premiere Raceway Inside Corners

On a Curve

Designed for use with cable cover systems, this product is an inside corner adapter. These work especially well with Quest’s Raceway-on-a-Roll and WireHider products. With these corner adapters, you can create and customize your own unique wire runs to best hide your cords from sight. Cut and position your straight cable cover runs, securing them to the floor or wall as instructed by the manufacturer. Then snap these corner covers easily into place to conceal the wires around the bend.

In addition to providing unparalleled cable management, the corner accessory also helps prolong cable life by protecting the cords within from the bumps and scrapes associated with everyday use. Molded from sturdy ABS plastics, these accessories are fire-retardant and UV-stabilized to prevent fading and staining. They are also latex-paintable for the ultimate in color-matching. In addition to these inside corner adapters, there are also options available for outside corners and non-corner right angles.

Quest Raceway Wire Hider | Cable Cord Concealer

In Hiding

What’s better than enjoying the low cost and high quality of FireFold’s extensive cable collection? Not having to see those cables running from your television! The easiest way to hide your wires from sight is the FWH-13414 from Quest. This premiere WireHider offers a professional look without the hassle of using wall plates. One inch wide, the four-foot strip of Raceway can accommodate several standard-size cables. There’s no need to be able to fit the bulky connectors through or wrestle to snap the cover back into place. A nearly invisible slit runs from end to end, allowing you to simply push your cables into place.

The FWH-13414 attaches to your wall by a strip of peel-and-stick adhesive. It is usually easier to run your cables through the WireHider after it is mounted to the wall or floor, but you can always add or remove cables easily even after it is set up. This strip is a single straight four-foot run, but it can easily be cut shorter using consumer-grade tools. With other Quest Raceway accessories, you can create curves, corners, and turns for a custom look in your home or business. Molded from smooth ABS plastic, this cable channel cannot be covered with latex paints, but the clean white color blends well with many styles of décor.

Quest Raceway Wire Hider Cover Lid

Put a Lid on it

When paired with the FWH-13414 , the FCL-23414 WireHider Cover Lid from Quest helps create the cleanest look in cable management without opening up your wall. It is designed to go on top of the FWH-13414 WireHider cable channel to cover and conceal the flexible slit. It is an optional accessory, but it offers an ultimate layer of professionalism to any cable run. Adding this cover lid to your WireHider is a snap- literally. Once your cable channel is installed and your cables are inside, simply press the lid over the wire molding until it slides into place.

This strip is a single straight four-foot run, but it can easily be cut shorter using consumer-grade tools. With other Quest Raceway accessories, you can create curves, corners, and turns for a custom look in your home or business. This lid is 1.5” wide, so it is only compatible with the 1.5” version of Quest’s WireHider and corner pieces. Molded from smooth ABS plastic, this product cannot be covered with latex paints, but the clean white color blends well with many styles of décor.

EZ-RJ45 Cat5E RJ45 Strain Relief Boots 50pk

The innovative Snag Proof Strain Relief is designed specifically to be crimped with the EZ-RJ45® plugs. Two Patent Pending versions are offered for both the Cat5/5e and the Cat6 plugs. The primary strain relief of the plug locks the snag proof strain relief in place so they will not pull off, creating one, integral assembly. Once crimped, this design allows the plug's primary strain relief to relax slightly, preventing the cable pairs from being over compressed. This decrease in stress contributes to achieving peak performance. The tab on the strain relief is designed to extend over the plug's locking tab, making it snag proof when administering patch cords.

Application

Maintain bend radiuses, especially on stranded cable. For an installation that requires a professional & finished look.

Platinum Tools Cat6 RJ45 EZ-RJ45 Connector 100 Pack

As anyone who has ever planned their network knows, terminating Ethernet cables isn’t necessarily hard. It can be a tedious process, though, and it is critical to speed and functionality to get it correct. If you have a lot of cables to connect or if you’re a network professional, the amount of time spent on getting conductors just right can be frustrating and even wasteful. You have to measure carefully to ensure you are clipping the precise length of wire to fit snugly into your connector and often you have to assume your pins have stayed in the right order before you crimp them.

Platinum Tools, a leading designer, and manufacturer of network wiring instruments, has created a patented EZ system to eliminate many of the headaches associated with those tiny connectors. Product number 100010B is a 100-pack of Cat6 EZ-RJ45 connectors. These connectors can be used with most ordinary crimpers, but the full benefits can only be experienced when used with an EZ-RJ45 crimp tool.

The Difference

The initial steps for adding an EZRJ45 connector onto a Cat6 Ethernet cable is the same. You score the outer jacket and remove an inch and a half, snipping the pull thread to get it out of your way once you have enough of the conductors exposed. Untwist the pairs and line them up according to your chosen wiring diagram. Then, instead of measuring where you need to snip off the excess wire, you skip straight to inserting the cable into the connector. Thanks to the all-transparent pull-through design, you can quickly check to make sure the correct wire pin-out has been maintained by checking the wires that have come out the end of the connector and by looking into the body of the connector itself. Once everything is lined up properly, crimp the connector on. The EZ-RJ45 tool will crimp and cut away the extra wire all in one squeeze.

Quest Premiere Raceway Wire Hider

The WireHider® Surface Mount Raceway was designed with both the professional and the DIY installer in mind. WireHider® was designed to eliminate the problem of hard to install locations where the cable has a tendency to fall out, especially on ceiling runs. This raceway duct speeds up installation by enabling you to simply push the cables into its flexible center slit and it allows you to exit anywhere along the run without the concern of the cable falling out.

Platinum Tools Cat6 EZ-RJ45 Strain Relief  50 Pack

Platinum Solutions

As anyone who has ever planned their network knows, terminating Ethernet cables isn’t necessarily hard. It can be a tedious process, though, and it is important to speed and functionality to get it correct. If you have a lot of cables to connect or if you’re a network professional, the amount of time spent on getting conductors just right can be frustrating and even wasteful.

Platinum Tools, a leading designer and manufacturer of network wiring instruments, has created a patented EZ system to eliminate many of the headaches associated with those tiny connectors. Product number 100036 is a 50-pack of EZ-RJ45 Cat6 strain-relief boots. These boots can only be used with EZ-RJ45 Cat6 connectors. When used with a connector, they help protect the cable from snags and relieve stress from bends and pressure.

The Difference

The initial steps for adding an EZ-RJ45 connector onto an Ethernet cable is the same. Slide the 100036 strain relief boot onto the cable as soon as you slip off the length you want. The unique design of these boots locks to the EZ-RJ45 end for easy all-at-once connections. Remove an inch and a half of the jacket. Untwist the pairs and line them up according to your chosen wiring diagram. Then insert the cable into the EZ-RJ45 connector, which is sold separately. Thanks to the all-transparent pull-through design, you can quickly check to make sure the correct wire pinout has been maintained by checking the wires that have come out the end of the connector and by looking into the body of the connector itself. Once everything is lined up properly, crimp the connector on. The EZ-RJ45 tool will crimp and cut away the extra wire all in one squeeze.

Platinum Tools Shielded EZ-RJ45 Connectors

Platinum Tools EZ-RJ45 connectors are known for simplifying twisted pair terminations. The unique patented design allows you to insert the wires through the connector and out of the front, enabling easy wiring sequence verification. These 100023C connectors are intended specifically for applications requiring shielded cable and connectors.

These connectors are built on the Cat6 framework, so they are compatible with both Cat5E and Cat6 cable. This external ground design can accommodate wires up to 0.280 inch in diameter.