Shop
Networking
Bulk Wire & Cable
Cables
Racks & Enclosures
Tools
Audio/Video/Home
HDMI
Mounts
Security
Adapters
Usb/Mobile/Tablet
Electrical
Technical Furniture
Shop Brands
FireFold
ICC
Intellinet Network Solutions
Jonard Tools
j5create
Kendall Howard
Netstrand
Paige Electric
Platinum Tools
Quest
Rhino Brackets
SimplyBrands
Structured Cable Products
Vanco
Vertical Cable
Wavenet
World Cord Sets
View All
About Us
Customer Service
Returns
Order Status
Shipping Policy
Customer Reviews
Contact Us
70497971000
Support@FireFold.com
Free Shipping on Orders > $99.99 - *Some Exclusions May Apply
Filter
Free Shipping
SimplyTEST PoE PRO Data Cable and PoE Verifier
The new PoE Pro eliminates guesswork when installing, maintaining, and troubleshooting networks where PoE is deployed. Previously technicians had to understand all the various standards, device power outputs, and cable lengths to be sure a device will operate successfully. The PoE Pro identifies the Class of the PoE source and power available to a PoE device regardless of cable length, cable quality, or other factors.
The VDV II Series are easy to use cable testers that check the integrity of copper cables commonly found in domestic, commercial or industrial voice, data or video installations, including telephone wiring, data network and video/security cabling.
Employing state-of-the-art technology, VDV II offers functionality not previously available in a wiremapper. The advanced wiremap engine accurately displays complex wiring faults instantaneously while TDR (Time Domain Reflectometry) aids troubleshooting and improves on-site productivity.
$707.95
SimplyTEST Fiber Optic Cable Visual Fault Finder with 2.5mm Universal Adapter for ST, SC & FC Connectors
The Visual Fault Finder is a visible laser light source used to check continuity, locate breaks, poor mechanical splices and damaged connectors in fiber optic cabling.
Used to verify continuity, test and find breaks in fiber links, locate pinched fiber strands in termination cabinets, or anywhere fiber optic cables are terminated and subject to mechanical damage.
The VFF5 is also an excellent aide to technicians terminating mechanical splices or pre-polished connectors where leaking light is an indicator of a poor fiber cleave or other misalignment.
$378.95
5% offat checkout
SimplyTEST SOC Fiber Holder For SC Connectors (each)
SimplyTEST™ Fiber Holder: Precision for SC Splice-On Connectors
Revolutionize your SC connector terminations with the ST-R301SOCSCLC Fiber Holder. This essential accessory ensures perfect positioning of Splice-On Connectors (SOCs) in your splicer, guaranteeing quick, reliable, and high-quality results.
$224.94
Select Options
SimplyTEST Fiber Protective Sleeve (Heat Shrink) 100pcs
SimplyTEST™ Fiber Protective Splice SleevesEnsure the long-term integrity and protection of your fusion splices with the TREND Networks R301-SHRINK-40MM Fiber Protective Splice Sleeves. These pre-sealed sleeves provide robust mechanical and environmental shielding for critical fiber connections.
$15.95
SimplyTEST FiberMASTER S60 Active Core Alignment Fusion Splicer Kit
FiberMASTER S60 Fusion Splicers offer superior splice performance in as little as 6 seconds. With industry-leading repeatability, your last splice will be as accurate as your first.
Product highlights
The new Fusion Splicer Series delivers exceptional speed, precision, and reliability, providing fiber optic technicians and network installers with industry-leading tools designed to improve both performance and efficiency.
The FiberMASTER S60 Fusion Splicer, featuring active core alignment technology, and the S40, with adaptive clad alignment, represent a significant leap forward in fusion splicing technology. Both models boast industry-leading repeatability with splice loss as low as 0.01dB, far exceeding ISO/EN/TIA standards and ensuring optimal network performance.
The FiberMASTER S60 is optimized for trunk networks and high-volume splicing in telecom applications, while the S40 is ideal for fiber-to-the-home (FTTH) installations and enterprise networks, providing tailored solutions for different types of fiber optic installations.
FiberMASTER S60 and S40 Fusion Splicers offers superior splice performance in as little as 6 seconds. With industry-leading repeatability, your last splice will be as accurate as your first. Safeguarding your investment has never been easier with unmatched customer support and a 3-year warranty as standard. Sapphire Care Plan is also available to minimize downtime and avoid unexpected service or repair costs.
$6,244.94
SimplyTEST FiberMASTER S40 Adaptive Clad Alignment Fusion Splicer Kit
SimplyTEST™ FiberMASTER S40 Fusion Splicers offer superior splice performance in as little as 6 seconds. With industry-leading repeatability, your last splice will be as accurate as your first.
The FiberMASTER S60 Fusion Splicer, featuring adaptive clad alignment, represents a significant leap forward in fusion splicing technology. Both models boast industry-leading repeatability with splice loss as low as 0.01dB, far exceeding ISO/EN/TIA standards and ensuring optimal network performance.
The FiberMASTER S40 is ideal for fiber-to-the-home (FTTH) installations and enterprise networks, providing tailored solutions for different types of fiber optic installations.
$3,432.44
SimplyTEST 2 x 250um, 2 x 900um Fiber Holders
SimplyTEST™ – Fiber Holder Kit: Precision & Speed for Splicing – 5 x 250um, 2 x 900um fiber holders
Maximize your splicing efficiency and consistency with the Fiber Holder Kit. Designed for seamless integration with your cleavers and fusion splicers, these holders ensure perfect fiber placement every time.
$787.44
SimplyTEST FiberMASTER S60 Battery
SimplyTEST™ Replacement battery continuous splicing with FiberMASTER S60
Maximize your uptime and productivity with the ST-R301BATTS60 Li-ion battery for your FiberMASTER S60 fusion splicer. Engineered for extended use and ultimate flexibility, it ensures your work never stops.
$362.44
SimplyTEST FiberMASTER S40 Battery
Ensure uninterrupted performance for your FiberMASTER S40 fusion splicer with the R301-BATT-S40 Li-ion battery. Designed for long-lasting power and flexibility, it keeps your splicing operations running smoothly.
$306.19
SimplyTEST Magnetic 900um fiber holders (pair)
SimplyTEST™ – Magnetic 900um fiber holders
$374.94
SimplyTEST Magnetic 250um fiber holders (pair)
SimplyTEST™ – Magnetic 250um fiber holders (pair)
SimplyTEST Magnetic 2mm/3mm fiber holder (pair)
SimplyTEST™ Magnetic 2mm/3mm fiber holder
SimplyTEST FiberMASTER Video Inspection Probe Tip - SC/APC
FiberMASTER Video Inspection Probe Tip – SC/APC
$249.94
SimplyTEST FiberMASTER Video Inspection Probe Tip - SC
FiberMASTER Video Inspection Probe Tip – SC
$206.19
SimplyTEST FiberMASTER Video Inspection Probe Tip - LC/APC
LC/APC port/bulkhead tip for FiberMASTER Video Inspection Probe
SimplyTEST FiberMASTER Video Inspection Probe Tip - LC
FiberMASTER Video Inspection Probe Tip – LC
SimplyTEST FiberMASTER Video Inspection Probe Tip - 2.5mm APC
2.5mm/APC universal port/bulkhead tip for FiberMASTER Video Inspection Probe
$312.44
SimplyTEST FiberMASTER Video Inspection Probe Tip - 2.5mm
FiberMASTER Video Inspection Probe Tip – 2.5mm
SimplyTEST FiberMASTER Video Inspection Probe Tip - 1.25mm APC
1.25mm/APC universal port/bulkhead tip for FiberMASTER Video Inspection Probe
SimplyTEST FiberMASTER Video Inspection Probe Tip - 1.25mm
FiberMASTER Video Inspection Probe Tip – 1.25mm
$218.69
SimplyTEST FiberMASTER Video Inspection Probe
FiberMASTER Video Inspection Probe
$1,518.69
SimplyTEST Launch Cable, SM G.657 A1, 150m, SC-ST
Launch Cable, SM G.657 A1, 150m, SC-ST
$232.44
SimplyTEST Launch Cable, SM G.657 A1, 150m, SC-SC APC
Launch Cable, SM G.657 A1, 150m, SC-SC APC
SimplyTEST Launch Cable, SM G.657 A1, 150, SC-SC
Launch Cable, SM G.657 A1, 150, SC-SC
SimplyTEST Launch Cable, SM G.657 A1, 150m, SC-LC
Launch Cable, SM G.657 A1, 150m, SC-LC
SimplyTEST FiberMASTER Single-mode OTDR
FiberMASTER Single-mode OTDR (1310/1550) with SC connector, Inspection port, Power meter
Test, Troubleshoot and Certify cabling faster with the FiberMASTER OTDR.
The FiberMASTER OTDR is available in 4 options, Quad, multimode, singlemode and PON.
The OTDRs feature both high dynamic range and small dead zones providing the precision required for installation and troubleshooting alike. The software simplifies certification of cabling to meet TIA/ISO/IEC/IEEE requirements with simple pass/fail results. Additionally custom test parameters are easily set to accommodate any application.
OTDRs can be complicated to configure and achieve accurate results. FiberMASTER automates testing and steps you through the process as shown below.
For FTTx/FTTH applications the PON OTDR identifies split ratios for easy testing and troubleshooting of inactive and active networks. The 1625nm wavelength allows in-service testing of networks without interrupting existing subscribers.
Why do I need a FiberMASTER?
It depends how important speed and accuracy are to you.
FiberMASTER – size, simplicity and value without compromise, made in the USA, tested in Germany.
The new FiberMASTER series of fiber optic testers will make it easier and faster to verify, troubleshoot and certify fiber optic cabling.The OTDR, PON OTDR, Power Meter and Light Source, and Inspection Probe will enable cable installers to get the dependable test results needed, while saving thousands of dollars.As one of the smallest OTDRs in the world you will find them easier to carry and operate while the rubberized housing will protect your investment. The simplified setup options makes them easy to use, saving you time on training and reducing the likelihood of errors.
Our New York Research and Development center of excellence has over 30 years experience designing OTDRs providing you with the most advanced, compact optical test systems available.
$4,744.94
SimplyTEST FiberMASTER Quad OTDR
FiberMASTER Quad OTDR (850/1300/1310/1550) with SC connectors, Inspection port, Power meter
$6,812.44
SimplyTEST FiberMASTER Power Meter and Light Source
FiberMASTER Multimode/single-mode power meter and quad light source kit, with Inspection port, VFL
$4,557.44
SimplyTEST FiberMASTER MM/SM Power Meter
FiberMASTER Multimode/single-mode power meter with interchangable SC/SC/FC connectors, Inspection port, VFL
$1,556.19
SimplyTEST FiberMASTER PON OTDR
FiberMASTER PON OTDR (1310/1550/1625) with SC-APC connectors, Inspection port, Power meter
$7,119.94
SimplyTEST Launch Cable, OM3, 150m, SC-ST
Launch Cable, OM3, 150m, SC-ST
SimplyTEST Launch Cable, OM3, 150m, SC-SC
Launch Cable, OM3, 150m, SC-SC
SimplyTEST Launch Cable, OM3, 150m, SC-LC
Launch Cable, OM3, 150m, SC-LC
SimplyTEST FiberMASTER Multimode OTDR
FiberMASTER Multimode OTDR (850/1300) with SC connector, Inspection port, Power meter
$3,744.94
SimplyTEST FiberMASTER Quad Light Source
FiberMASTER Quad light source with LC connectors, Inspection port, VFL
$2,932.44
SimplyTEST Bundle - LanTEK IV-S 500MHz + Sapphire 3 Years
The ST-LT4500S bundle includes a LanTEK IV-S 500MHz, permanent link adapters, channel adapters, and 1 year Saphire Care Plan, offering complete protection for your certifier.
$14,324.50
SimplyTEST LanTEK IV-S 500MHz (with PL/CH Adapters) & 1 Year of Sapphire Care Support Bundle
The LanTEK IV-S cable certifier brings a new standard to the industry, saving you time and improving profitability. It’s time to change the way you certify.
A copper and fiber cable certifier, will test and save a Cat6A link in 7 seconds and certify links up to Cat8.1 and Cat8.2, including TCL and Resistance Unbalance measurements. Plus, LanTEK IV-S future-proofs your investment – it will sweep to 3000MHz providing room for future ISO/TIA test standards.
$12,862.95
SimplyTEST LanTEK IV-500MHz with PL/CH adapters, FiberTEK IV MM & SM, 1 Year of Sapphire Care Support
LanTEK IV-500 MHz, Permanent Link Adapters, Channel Adapters, FiberTEK IV MM LED and SM Laser Kit with LC MM 50/125μm, LC SM 9/125μm and 1 Year Sapphire Care Plan
$24,994.94
SimplyTEST Bundle - LanTEK IV-S 3000MHz + Sapphire 3 Years
The ST-LT43000S3Y bundle includes a LanTEK IV-S 3000MHz, permanent link adapters, channel adapters, and 3 year Saphire Care Plan, offering complete protection for your certifier.
$15,390.95
SimplyTEST LanTEK IV-S 3000MHz (with PL/CH Adapters) & 1 Year of Sapphire Care Support Bundle
The ST-LT43000S bundle includes a LanTEK IV-S 3000MHz, permanent link adapters, channel adapters, and 1 year Saphire Care Plan, offering complete protection for your certifier.
$14,994.94
SimplyTEST Bundle - LanTEK IV-S 3000MHz + FiberTEK IV + Accessories + Sapphire 3 Years
LanTEK IV-3000 MHz, Permanent Link Adapters, Channel Adapters, FiberTEK IV MM LED and SM Laser Kit with LC MM 50/125μm, LC SM 9/125μm and 3 Year Sapphire Care Plan
$28,744.94
SimplyTEST LanTEK IV-3000MHz w/ PL/CH adapters, FiberTEK IV MM & SM, 1 Year of Sapphire Care Support
LanTEK IV-3000 MHz, Permanent Link Adapters, Channel Adapters, FiberTEK IV MM LED and SM Laser Kit with LC MM 50/125μm, LC SM 9/125μm and 1 Year Sapphire Care Plan
$25,869.94
SimplyTEST Tone and Probe Kit for Data Cable Tracing
LOCATE NETWORK CABLES FAST Tone generator and probe kit for wire, LAN, WAN, and network cable tracing. Tracker for RJ45, Cat 5e, Cat 6, Cat6A, Coax, Ethernet, telephone lines, and more. * Trace longer cables using the industry-leading power output. * Solve issues faster with power supply for external talk sets. * Verify cabling with polarity and continuity. * Easy to use and requires no training. * Locate weak signals using the highly-sensitivity probe. * Easier cable tracing with both audible and visual indicators. * Find cables in noisy environments using the earphone jack. * Operates in dark areas using the LED torch.
Depend on our new Tone & Probe to easily trace all types of copper cables. Our industry leading power output provides cable tracing you can depend on, even over long distances. Find cabling fast using the visual signal indicator and powerful speaker combination.
The tone generator is equipped with comprehensive line testing features for troubleshooting and service verification. The tone and probe set creates the perfect team to accurately identify data cable pairing using its multiple tone pattern feature.
Applications:
Tone & Probe is compatible with the following TREND Networks series of products: LanTEK IV, III & II, LanXPLORER Pro, SignalTEK, NaviTEK, PoE PRO & VDV II
$136.88
SimplyTEST SecuriTEST IP Replacement Battery
SimplyTEST™ SecuriTEST IP Replacement Li-Ion Battery. 7.4 Volt/ 5000 mAh/ 37 Watt.
$179.50
SimplyTEST SecuriTEST IP Digital/Analog/HD Coax CCTV Tester
SecuriTEST IP is an installation and troubleshooting tester for digital/IP, HD coax and analog CCTV camera systems. With a single tester that can power, configure and document, SecuriTEST IP increases productivity from start to finish.
$834.38
SimplyTEST LanTEK IV-S 3000MHz (with PL/CH Adapters)
THE MOST POWERFUL AND FASTEST CERTIFIER WE’VE EVER MADE.
$13,967.97
SimplyTEST LanTEK IV-S 500MHz (with PL/CH Adapters)
$13,744.94
SimplyTEST Kit of 12 x Coax Remote Units (#1 - #12)
ST-158053 – Kit of 12 x coax remote units (#1 – #12)
$87.44
×
×