BABA Certification

Kendall Howard 1916-2-100 Wall Mount V-Rack

Kendall Howard is one of the top companies out in the rack mount market. Their merchandise ranges to various products besides rack mounts alone, though, and are always high quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

Kendall Howard V-Racks allow you to vertically or horizontally mount servers or other rack-mountable devices regardless of depth. Designed to mount on a wall or under a desk, the Kendall Howard V-Rack provides users more versatility on where they can place their products while saving them space.

These v-racks are low profile, meant to be barely visible from a front view. Each can hold up to 150 pounds easily, so most of your equipment should be able to be on them. They only weigh about 4 pounds themselves, so they are relatively lightweight for easy installation. Each one of these comes in a black powdered finish so that they will blend in with most of your other mounting equipment with ease.

Made in the USA and backed by a limited lifetime warranty from Kendall Howard, you really cannot go wrong with this great product.

What else could you ask for? Well, you might say to yourself, “I could go for a great price.” You’re in luck! You’re at FireFold, where our middle name might as well big ‘great price’. It is not, but, that doesn’t mean you cannot get a price. Just glance up there in the upper right and drool in amazement. You’ll be happy when you make this purchase and so will your wallet!

Kendall Howard Wall Mount Server Rack

Kendall Howard is one of the top companies out in the rack mount market. They provide high-quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

This was the first wall mount rack that Kendall Howard designed. It did not take long for this rack to become the standard that all wall mount racks are measured against. This wall mount rack has an 18” maximum depth, but has a completely adjustable width. This makes it very convenient for pretty much any rack mount solution.

Details

This great wall mount rack comes in two pieces, making it able to be installed within about five minutes. It comes with standard pre-tapped 10-32 rails, but does not include a shelf with it. Besides it being able to be adjusted to any width, you can easily use gangs vertically across this rack mount. With it being heavy duty, this rack mount can even handle up to 350 pounds of weight - easily able to handle most equipment that you could set upon it.

With all of this and the reasonable price provided by FireFold, what more could you really want? Well, Kendall Howard throws in a limited lifetime warranty. So much to make your wallet happy, how can you deny yourself this great mount rack? Go ahead and grab one today for your next project.

Kendall Howard 2U 12" Vented Economy Rack Shelf

Kendall Howard is one of the top companies out in the rack mount market. They provide high quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

What you’re looking at today is a great 2U 12” vented economy component rack shelf. This component rack shelf is light-duty, made to only hold up to 25 pounds. 12 inches is great for cable boxes or light computers, with usually a little room to spare. The component rank shelf itself only weighs 5.40 pounds, making it very light for when installation is performed. Plus, this shelf has many holes across the base of it, allowing for plenty of air circulation to keep your components cool.

Details

This shelf is rated 2U. A U (unit) is the standard size for a single rack interval. While others can be 3U, there will be no such waste of space here. The specific dimensions are 19 inches wide, 12.112 inches deep, and 3.47 inches high.

The shelf is painted black, so it should easily blend in with practically any rack mounting that you are using. There are four mounting holes, allowing you to be able to secure this component shelf easily. But hey, if you do have any concerns, let them be put to rest! This great component shelf comes with a one year warranty from the manufacturer. We here at FireFold will help you get situated if there is ever a manufacturer issue with your product.

With all of the features this component shelf has, you really can’t go wrong. It’s simple, sleek, and ready to be a part of your project right now. Go ahead and click that button and get one of these added to your cart today! You will be happy that you did.

Kendall Howard 1U Tool-less 5X D-Ring Cable Manager

Kendall Howard is one of the top companies out in the rack mount market. They provide high quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

The Kendall Howard 1U 5X D-Ring Cable Manager combines the best parts of our D-Ring Cable Management Kit and our Cable Routing Blanks. The blend of D-rings and cable routing cutouts make this one of the most versatile cable managers on the market! Whether you’re routing cables from front to back of your cabinet or organizing and supporting patch cables, this 5X D-Ring Cable Manager will be an effective tool for your IT installation.

This 1U cable routing blank is 19” EIA compliant, so you can use it with nearly any rack mount solution that you plan to use. Of course, we recommend you use Kendall Howard with this piece of equipment for best results! However, it is not required. As long as the dimensions match up, you’ll be perfectly fine.

Details

The three inch by one and three-quarter inch opening that this D-rings provides a large supported area to organize and route cable bundles in two-post racks, wall mount racks, server racks, and more. This specific ring spacer comes with seven, large open cut-outs that provide ample room for routing various cables such as copper, fiber optic, telecom, and power cables.

Cable manager can be mounted in two different positions, maximizing your cable management options. Face the D-rings toward the front of the rack to easily manage and support patch cables, or face them toward the back of the rack where the open design provides easy support of trunk cables.

Included with the cable manager are tool-less clips that snap into any cage nut style rail while eliminating the need for hardware. Standard mounting holes can be used in conjunction with rack screws on tapped rails.

What possibly could you wish for more than this? Perhaps no damage to your wallet, I bet you’re saying. Well, this is FireFold. Of course your wallet will be feeling just fine afterwards!

Kendall Howard 0100-1-002-01 0.75" Rack Screws

All Kendall Howard 10-32 Rack Screws have a pilot point that helps prevent cross threading and guide the screw when being installed. Kendall Howard rack screws are cold forged and have a black oxide with wax finsh. These truss head screws are .75 inches long and install with any Phillips screw driver or bit.

Kendall Howard 12-24 Rack Screws 100 Pack

Kendall Howard is one of the top companies out in the rack mount market. They provide high quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

The Kendall Howard 12-24 Rack Screws are not your everyday hardware store item. The superior American-made quality should be your only choice for installing rack mount devices such as shelves, cable managers, servers, and other network, A/V and electronic equipment.

Specifications

These 12-24 pilot point rack screws are .75” in length and are compatible with Kendall Howard 12-24 tapped rail system. They can also be used with universal cage nut style rails when used with the 12-24 cage nuts that Kendall Howard provides. Each rack screw comes with a Phillips truss head, so installation is simple. Simply grab your Phillips head screwdriver or bit and get to work!

Every screw is RoHS compliant, meaning that they meet the highest quality and safety standards. Each one has been constructed from steel and finished with a black oxide coating to allow these screws to easily match most standard network racks, cabinets, and accessories.

This specific package comes with fifty in it, so you should have plenty to go around. If this sounds great to you, which it should, go ahead and add some to your cart today.

Kendall Howard 2U 14" Vented Cantilever Rack Shelf

Kendall Howard is one of the top companies out in the rack mount market. They provide high quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

The Kendall Howard 2U 14” Vented Eco Shelf is a medium duty shelf that helps to maintain proper air circulation in your racks and cabinets. This vented eco shelf is rated to hold up to 50 lbs. The vented eco shelf is perfect for supporting monitors, switches and other lightweight network or A/V equipment.

Details

This specific vented shelf is 2U. A U (unit) is the standard size for a single rack interval. While others can be 3U, there will be no such waste of space here. The dimensions of this shelf is 19” (W) x 14” (D) x 3.47” (H), making it quite suitable for your custom rack work. It is easy to install with four mounting holes that can be used with rack screws. Plus, this vented rack shelf comes with rounded corners - eliminating sharp edges that could damage equipment or yourself.

If you’re looking for the top of the line with plenty of airflow, look no further! Go ahead and get yourself squared away without any further delay!

Kendall Howard 1915-1-400-00 CPU Bracket

Kendall Howard is one of the top companies out in the rack mount market. Their merchandise ranges to various products besides rack mounts alone, though, and are always high-quality products at a great price. These items, in general, are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

You’re in an office, and you’re tired of your computer being on the floor or want to get it setup on the side of your desk. Well, we have a solution for that! Kendall Howard's Desktop/Tower Wall Mount CPU Brackets are designed to get the computer off the floor and the desktop. The brackets make it easy to secure and mount any small-form-factor PC to the wall or side of the desk. The velcro strap secures the PC to the bracket.

Everyone needs a CPU bracket to protect their PC, but not everyone is smart enough to bother. Be smart and take action!

Computers located on the floor are in continual danger of being jostled and kicked, not to mention the difficulty in accessing the drives, ports, and card readers. Desktop computers and PC’s that sit on a desk take up valuable workspace look cluttered and unorganized and run the risk of being damaged by a soda or coffee spill. Kendall Howard's Desktop/Tower Wall Mount CPU Brackets protects the PC and creates a more functional, organized workspace.

That’s about it! You have a great, sturdy product just waiting to be bought. So, stop putting it off! Go ahead and get one of these today and get the job done. Need more than one? No problem! Our prices are so great that you’ll still be saving money. Buy from the USA today and rest assured that this product will last a long time.

Kendall Howard 12-24 Rack Screws 50 Pack

Kendall Howard is one of the top companies out in the rack mount market. They provide high quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

The Kendall Howard 12-24 Rack Screws are not your everyday hardware store item. The superior American-made quality should be your only choice for installing rack mount devices such as shelves, cable managers, servers, and other network, A/V and electronic equipment.

Specifications

These 12-24 pilot point rack screws are .75” in length and are compatible with Kendall Howard 12-24 tapped rail system. They can also be used with universal cage nut style rails when used with the 12-24 cage nuts that Kendall Howard provides. Each rack screw comes with a Phillips truss head, so installation is simple. Simply grab your Phillips head screwdriver or bit and get to work!

Every screw is RoHS compliant, meaning that they meet the highest quality and safety standards. Each one has been constructed from steel and finished with a black oxide coating to allow these screws to easily match most standard network racks, cabinets, and accessories.

This specific package comes with fifty in it, so you should have plenty to go around. If this sounds great to you, which it should, go ahead and add some to your cart today.

Kendall Howard 10-32 Rack Screws 50 Pack

All Kendall Howard 10-32 Rack Screws have a pilot point that helps prevent cross threading and guide the screw when being installed. Kendall Howard rack screws are cold forged and have a black oxide with wax finish. These truss head screws are .75 inches long and install with any Phillips screw driver or bit.

Kendall Howard 10-32 Cage Nuts 100 Pack

Cage Nuts are used to install rackmount equipment into server rack cabinets, 4-post racks, wallmount cabinets and racks, and 2-post racks. Cage nut style rails are often referred to as universal mounting rails, which are the most common type of rails used today.

If a rack or cabinet has cage nut style rails or universal mounting rails, they will require cage nuts. The thread size of the cage nut and the thread size of the screw must be the same to properly install rackmount components.

Kendall Howard 10-32 Cage Nuts are made in the USA, from high quality American steel and are packaged in metal resealable tins. They are available in 50, 100 and 2500 packs.

Kendall Howard 0100-1-012-01 Rack Screws With Washers

All Kendall Howard 10-32 Rack Screws have a pilot point that helps prevent cross threading and guide the screw when being installed. Kendall Howard rack screws are cold forged and have a black oxide with wax finsh. These truss head screws are .75 inches long and install with any Phillips screw driver or bit.

Kendall Howard V-Line Wall Mount Rack 18" Depth

The Kendall Howard 12U 18" Deep V-Line Wall Mount Rack is the perfect low-cost solution for IT installers and A/V technicians to use on a daily basis. Its open-frame design makes the rack easy to assemble and install, while its durability makes this rack reliable for years to come. For a simple and dependable open frame solution, check out the 12U 18" Deep V-Line Wall Mount Rack.

• 18" usable depth
• Cage Nut or 10-32 Tapped Rails
• 19" EIA compliant
• Made in the USA

Kendall Howard 2U 14.75 Inch Economy Rack Shelf

Kendall Howard is one of the top companies out in the rack mount market. They provide high quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

What you’re looking at today is a great 2U 14.75” component rack shelf. This component rack shelf is light-duty, made to only hold up to 25 pounds. 14.75 inches is great for cable boxes or light computers, with usually a little room to spare. The component rank shelf itself only weighs 5.40 pounds, making it very light for when installation is performed.

Details

This shelf is rated 2U. A U (unit) is the standard size for a single rack interval. While others can be 3U, there will be no such waste of space here. The specific dimensions are 19 inches wide, 14.75 inches deep, and 3.47 inches high.

The shelf is painted black, so it should easily blend in with practically any rack mounting that you are using. There are four mounting holes, allowing you to be able to secure this component shelf easily. But hey, if you do have any concerns, let them be put to rest! This great component shelf comes with a one year warranty from the manufacturer. We here at FireFold will help you get situated if there is ever a manufacturer issue with your product.

With all of the features this component shelf has, you really can’t go wrong. It’s simple, sleek, and ready to be a part of your project right now. Go ahead and click that button and get one of these added to your cart today! You will be happy that you did.

Kendall Howard Fixed V-Line Wall Mount Rack

Kendall Howard is one of the top companies out in the rack mount market. Kendall Howard is renowned for engineering high quality products at a great price. These items are not found everywhere in general, but we at FireFold are helping you get connected to this great manufacturer.

Looking for an easy installation for a wall mount situation? Well, we’ve got you covered right here. The Kendall Howard V-Line Open Frame Fixed wall mount racks are the perfect low cost solution that IT Installers and AV Technicians use every day. Kendall Howard knockdown Fixed Wall Racks are incredibly easy to assemble and install.

Providing a 300 pound capacity for equipment, the bolt together assembly has a self-squaring design to make assembly easy. When a simple open frame wall mount rack is needed, the Kendall Howard V-Line Open Frame Fixed wall mount rack is a great option.

This simple product is made in the USA and comes with a limited lifetime warranty from Kendall Howard - so you know you are getting a great product.

Kendall Howard 1U Vented Sliding Rack Shelf

Kendall Howard manufactures and stocks 2 models of our sliding rack shelves - solid and vented - each holding up to a 100-pound weight capacity. Our sliding rack shelves are perfect for servers, keyboards, KVM’s, switches, or any other component that you want the ability to slide out, whether for convenience or to access the back of the equipment.

The Kendall Howard 20" deep Vented Sliding Rack Shelf has a 100-pound maximum weight capacity. The shelf surface is 20" deep and 16.5" wide. The shelf extends a full 18" out of the rack making it easy to access the back of mission-critical components and maintain your network equipment. The venting pattern allows for maximum airflow. The mounting ears will mount in any 19” EIA Compliant rack with a minimum mounting depth of 19" and a maximum mounting depth of 28". The Kendall Howard 20" deep Vented Sliding Rack Shelf has a built-in lip to make sliding them in and out easy and, due to their innovative design, the 20" solid sliding rack shelf can be used as a 1U drawer.

Kendall Howard 20*16.5 1U Non-Vented Sliding Rack Shelf

Kendall Howard manufactures and stocks 2 models of our sliding rack shelves - solid and vented - each holding up to a 100-pound weight capacity. Our sliding rack shelves are perfect for servers, keyboards, KVM’s, switches, or any other component that you want the ability to slide out, whether for convenience or to access the back of the equipment.

The Kendall Howard 20" deep Solid Sliding Rack Shelf has a 100-pound maximum weight capacity. The shelf surface is 20" deep and 16.5" wide. The shelf extends a full 18" out of the rack making it easy to access the back of mission critical components and maintain your network equipment. The mounting ears will mount in any 19” EIA Compliant rack with a minimum mounting depth of 19" and maximum mounting depth of 28". The Kendall Howard 20" deep solid sliding rack shelf has a built-in lip to make sliding them in and out easy and, due to their innovative design, the 20" solid sliding rack shelf can be used as a 1U drawer.

Kendall Howard V-Rack - Tapped Rails

Kendall Howard V-Racks allow you to vertically or horizontally mount servers or other rack-mountable devices regardless of depth. The V-Racks with 10-32 tapped rails are great for smaller rackmount equipment. Designed to mount on a wall or under a desk, the Kendall Howard V-Rack provides users more versatility on where they can place their products while saving them space.

• Low profile design
• Tapped rails
• Includes 12 10-32 Rack Screws
• No depth restrictions
• 150 lb. weight capacity
• 19" EIA compliant
• Made in the USA
• Limited Lifetime Warranty

Kendall Howard Wall Mount Small Form Factor CPU Bracket

Kendall Howard is one of the top companies out in the rack mount market. Their merchandise ranges to various products besides rack mounts alone, though, and are always high quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

You’re in an office and you’re tired of your small form-factor computer being on the floor or want to get it setup on the side of your desk. Well, we have a solution for that! Kendall Howard's Small-Form-Factor Wall Mount CPU Brackets are designed to get the computer off the floor and the desktop. The brackets make it easy to secure and mount any small-form-factor PC to the wall or side of the desk. The velcro strap secures the PC to the bracket.

Everyone needs a CPU bracket to protect their PC, but not everyone is smart enough to bother. Be smart and take action!

Computers located on the floor are in continual danger of being jostled and kicked, not to mention the difficulty in accessing the drives, ports, and card readers. Desktop computers and PC’s that sit on a desk take up valuable workspace, look cluttered and unorganized, and run the risk of being damaged by a soda or coffee spill. The Kendall Howard Small-Form-Factor Wall Mount Bracket protects the PC and creates a more functional, organized workspace.

You have a great, sturdy product just waiting to be bought. So, stop putting it off! Go ahead and get one of these today and get the job done. Need more than one? No problem! Our prices are so great that you’ll still be saving money. Buy from the USA today and rest assured that this product will last a long time.

Kendall Howard (15U) Fixed Wall Cabinet 

Kendall Howard

Kendall Howard is one of the top companies out in the rack mount market. They provide high quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

If you are looking for the right wall mount rack at the right price, the LINIER brand is the solution for you. The feature rich design gives you a universal enclosure, guaranteed to function for a variety of applications.

Details

What you have here is a great, EID compliant wall rack mount that is rated to hold 250 pounds. In case you ever wonder how much weight that is, it’s roughly the weight of a fully grown kangaroo. That’s right, you have a wall rack mount right here that could hold a kangaroo! Not that you would, we’re just saying.

The cabinet itself weighs 64 pounds, so it will definitely be at least a two person job to install onto the wall. However, once it is set into place, we have a lot of features that will make your life easier. It comes with adjustable rails, removable side panels, and even a reversible glass door. These are all great for accessibility and adjustability once it has been set into place. Plus, you get locking doors and side panels - allowing you to make sure your equipment is safe and secure.

With a sleek black finish and a basic, cost-effective design - you really couldn’t ask for more. You get a five year limit warranty and a great price, so no more excuses. Get your hands on this today for your project! You’ll be glad you did.

Kendall Howard 0004-1-002-01 Universal Wire Minder

Ever heard of Kendall Howard? Well, you have now. Kendall Howard is one of the top companies out in the rack mount market. They provide high-quality products at a great price. These items, in general, are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

Today, you’re taking a gander at Kendal Howard’s Universal Wire Minder. This universal wire minder is great, compact cable management tool designed to be installed onto cage nut and tapped rails in wall cabinets, wall mount racks, Telco racks, and full-size server cabinets. Don’t feel that you are limited by this list, though! This cable minder can also be mounted on walls or furniture, so the possibilities are practically infinite.

Let’s Have Some Specifics

Made in the USA, this little wire minder is made from cold-rolled steel. It has been painted with a black powder coat finish for not only durability but also to allow it to easily blend in with most rack mounts.

This wire minder has a 3 x 1.5-inch cable opening, giving you plenty of space to be able to run your cables through it. It is EIA 310-D compliant, so you know it is meeting the standards for rack mounts. Besides all this, it is able to be mounted in eight different positions. You are sure to be able to find a way to mount it to suit your needs!.

With all of this and a limited lifetime warranty from the manufacturer, how can you possibly go wrong? You can't, and you know it! Get a few of these today to find out the possibilities they allow with your project. You are sure to be able to enjoy each one for years to come.

Kendall Howard 41U 2 Post Cable Cove Server Rack

Kendall Howard 2 Post Cable Cove Racks™ are the most functional Telco racks on the market today. With most 2 post racks, half the rack space is lost due to cable managers that actually make it more difficult to manage a network because they require longer patch cables and trunk cables. When these cables get tangled it becomes a giant mess, making it more difficult to trace down connectivity issues.

The Patent Pending Kendall Howard 2 Post Cable Cove Rack™ has two 4 inch cable management channels that make it easy to run cables into the frame, eliminating the need for additional exterior vertical cable managers. The unique design of the 2 Post Cable Cove Rack™ makes it easy to zone network switches and manage them more efficiently with shorter patch cables, eliminating the need for horizontal cable managers, and freeing up valuable rack space.

These racks can be freestanding or anchored to the floor (floor mounting hardware not included).

• Two 4" internal vertical cable channels
• 1,200 lb. weight capacity
• Base capable of anchoring to floors
• 19" EIA compliant
• Made in the USA
• Limited Lifetime Warranty

Kendall Howard 10-32 Cage Nuts 50 Pack

Cage Nuts are used to install rackmount equipment into server rack cabinets, 4-post racks, wall mount cabinets and racks, and 2-post racks. Cage nut style rails are often referred to as universal mounting rails, which are the most common type of rails used today.

If a rack or cabinet has cage nut style rails or universal mounting rails, they will require cage nuts. The thread size of the cage nut and the thread size of the screw must be the same to properly install rackmount components.

Kendall Howard 10-32 Cage Nuts are made in the USA, from high quality American steel and are packaged in metal resealable tins. They are available in 50, 100 and 2500 packs.

Kendall Howard (6U) Wall Cabinet 

Kendall Howard

Kendall Howard is one of the top companies out in the rack mount market. They provide high-quality products at a great price. These items, in general, are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

If you are looking for the right wall mount rack at the right price, the LINIER brand is the solution for you. The feature rich design gives you a universal enclosure, guaranteed to function for a variety of applications.

Details

What you have here is a great, EID compliant wall rack mount that is rated to hold 250 pounds. In case you ever wonder how much weight that is, it’s roughly the weight of a fully grown kangaroo. That’s right, you have a wall rack mount right here that could hold a kangaroo! Not that you would, we’re just saying.

The cabinet itself weighs 41 pounds, so it will definitely be at least a two person job to install onto the wall. However, once it is set into place, we have a lot of features that will make your life easier. It comes with adjustable rails, removable side panels, and even a reversible glass door. These are all great for accessibility and adjustability once it has been set into place. Plus, you get locking doors and side panels - allowing you to make sure your equipment is safe and secure.

With a sleek black finish and a basic, cost-effective design - you really couldn’t ask for more. You get a five-year limit warranty and a great price, so no more excuses. Get your hands on this today for your project! You’ll be glad you did.

Kendall Howard 12-24 Cage Nuts 100 Pack

Kendall Howard

Kendall Howard is one of the top companies out in the rack mount market. They provide high-quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

The Kendall Howard 12-24 cage nuts create a threaded mounting hole for mounting equipment on to universal rack rails commonly found in server enclosures, open frame racks, and wall mount cabinets. Universal mounting rails, also known as cage nut style rails, are the most common and preferred type of rails used on the market today.

Specifications

Each nut and spring steel cage features wings that can be compressed to snap into the square holes found in universal or punched panel rails. These nuts are able to be easily replaced if stripped, compared to if an entire screw gets stripped.

This specific package comes with one hundred in it, so you should have plenty to go around. If this sounds great to you, which it should, go ahead and add some to your cart today.

Kendall Howard Patch Panel Brackets make mounting patch panels or shallow equipment simple and easy. When there is no need for a wallmount rack or cabinet, Patch Panel Brackets are a great low cost alternative. The hinged design delivers the functionality of a swing-out wallmount rack without the added cost.

Simply mount the patch panel to the hinged side of the bracket, swing it open and terminate all of the cable. Then use the cable bumps and 6” depth to manage all the cables. When finished, close the bracket and screw the patch panel to the other side.

Kendall Howard 2U 12" Economy Cantilever Rack Shelf

Kendall Howard is one of the top companies out in the rack mount market. They provide high quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

What you’re looking at today is a great 2U 12” component rack shelf. This component rack shelf is light-duty, made to only hold up to 25 pounds. 12 inches is great for cable boxes or light computers, with usually a little room to spare. The component rank shelf itself only weighs 4.35 pounds, making it very light for when installation is performed.

Details

This shelf is rated 2U. A U (unit) is the standard size for a single rack interval. While others can be 3U, there will be no such waste of space here. The specific dimensions are 19 inches wide, 12.112 inches deep, and 3.47 inches high.

The shelf is painted black, so it should easily blend in with practically any rack mounting that you are using. There are four mounting holes, allowing you to be able to secure this component shelf easily. But hey, if you do have any concerns, let them be put to rest! This great component shelf comes with a one year warranty from the manufacturer. We here at FireFold will help you get situated if there is ever a manufacturer issue with your product.

With all of the features this component shelf has, you really can’t go wrong. It’s simple, sleek, and ready to be a part of your project right now. Go ahead and click that button and get one of these added to your cart today! You will be happy that you did.

Kendall Howard 10-32 Rack Screws With Washers 50 Pack

All Kendall Howard 10-32 Rack Screws have a pilot point that helps prevent cross-threading and guides the screw when being installed. Kendall Howard rack screws are cold-forged and have a black oxide with wax finish. These truss head screws are .75 inches long and install with any Phillips screwdriver or bit.

Adjustable Standoff Bracket

The Kendall Howard Adjustable Standoff Bracket is designed to solve the issue of your rack being too deep or too shallow. This Adjustable Standoff Bracket can be set to a minimum depth of 3.5” to a maximum or 6” allowing for more mounting options than ever before! Constructed from 16-gauge steel, these mounts are durable, strong, and dependable. Compatible with all EIA 19” and 23” wide server racks or wall mounts.

• Useable depth: 3.5 to 6
• Material: 16 gauge cold rolled steel
• Color / finish: Black texture powder coat
• Limited lifetime warranty
• 19” EIA compliant
• Made in the USA
• Sold as a pair
• Rack mounting hardware sold separate
• 100 lb max load on four post racks
• 30 lb max load on two post racks

Kendall Howard 1U Cable Lacing Shelf

The Kendall Howard 1U Cable Lacing Shelf is no ordinary shelf. It is designed to offer a supportive surface for cables when securing, routing, and organizing connection points to and from switches, patch panels, and other rackmount equipment. For versatile mounting, the 1U Cable Lacing Shelf can be placed above, below, behind, or in front of your network devices. As a result, valuable rack space is made available for other rack configuration needs. Managing cables on this lacing shelf is easy with the help of the Hook and Loop Cable Ties. Simply bundle cables to the 1U Cable Lacing Shelf with the Hook and Loop Cable Ties to add support, organization, and protection of your network cabling.

• 6" depth
• Supports up to 10 lbs. of cables
• 19" EIA compliant
• Made in the USA

Kendall Howard 12" 1U Vented Cantilever Rack Shelf 

The Kendall Howard 1U 12” Vented Component Shelf is one of our heavy-duty component rack shelves. This shelf has a 70-pound weight capacity and it will easily support servers, tower computers, monitors, batteries, and UPS's. When equipment needs to be put in a rack, ask for Kendall Howard and protect your investment.

Kendall Howard 2 Piece Server Rack Kit 1927-3-002-00

The 2 Piece Conversion Kit began as an added support bracket that was used when anchoring two 2 post racks together. As time went on, people came up with dozens of applications that make this one of the handiest bracket and bracing systems on the market today. These handy brackets adjust from 20" to 35" and the possibilities are endless.

Kendall Howard 2 Unit 2 Piece Telco Rack Shelf

Kendall Howard 2 Piece Telco Rack Shelves are part of the Kendall Howard medium-duty line of rack shelves. This shelf is specially made to be a perfect fit for any 2-post rack. Simply bolt one shelf to each side of any 2-post rack.

The Kendall Howard 2 Piece Telco Rack Shelves have 4 mounting holes per U space, rounded corners, and a 200-pound total weight capacity.

Kendall Howard 1U 4-Point Adjustable Rack Shelves are the most versatile adjustable shelf available. This shelf adjusts from 20” to 36” and, therefore, it is no longer necessary to figure out the depth of the rails in the rack. This shelf will work with every 19" EIA compliant 4-post rack or server cabinet on the market today.

The Kendall Howard 4-Point Adjustable Shelf allows the full depth of the rack to be used because the entire shelf plate adjusts rather than just the mounting flanges. They are in stock and ship same day!

Works with all 19" EIA Compliant 4 Post Racks and Cabinets

Kendall Howard 12" 1U Non-Vented Cantilever Rack Shelf

The Kendall Howard 1U 12” Component Rack Shelf is one of our heavy-duty component rack shelves. This shelf has a 70-pound weight capacity and it will easily support servers, tower computers, monitors, batteries, and UPS's. When equipment needs to be put in a rack, ask for Kendall Howard and protect your investment.

Kendall Howard 1910-1-001-01 Stationary Keyboard Tray

Kendall Howard is one of the top companies out in the rack mount market. They provide high quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

What you have here is a great keyboard tray! The Kendall Howard 1U Stationary Keyboard Tray is a great way to support a keyboard in any 19” EIA Compliant rack system. It has a depth of eight inches, so it can easily handle nearly any kind of keyboard that you need to have on your rack station.

Details

The simplistic design provides a quick and effortless solution for rack systems which need to provide space for a keyboard. The angled shelf supports any standard keyboard in a comfortable position for users. The rounded corners and textured powder coat finish help to eliminate accidental injury or damage to installers, users and surrounding equipment.

This keyboard tray comes in a sleek 1U rating. A U (unit) is the standard size for a single rack interval. While others can be 2U, 3U, or even 4U, there will be no such waste of space here. Plus, with a weight just above four pounds, this tray is going to be relatively lightweight for installation.

Each of these trays is made in the USA from quality metal and then coated with a black powder finishing coat to easily match most of your rack mounting options available. You know it’ll be sturdy as well, due to the quality metal used in its’ creation.

With a limited lifetime warranty provided by Kendall Howard themselves and FireFold’s competitive prices, you can’t really go wrong with this product. Stop putting off your project and add one of these time saving keyboard trays today. You’ll be overjoyed when it lands at your doorstep! Or office, wherever you are planning on having this delivered!

Kendall Howard 1U Black Flat Rack Mount Panel

Kendall Howard is one of the top companies out in the rack mount market. They provide high quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

The Kendall Howard 1U Flat Spacer Blanks are a cut above the rest. Spacer blanks are often used as a way to fill in any gaps and conceal empty rack spaces in a rack or enclosure. The use of filler panels not only makes racks look neat, clean and organized, but when installed properly they provide added support to the mounting rails. These spacer blanks are also critical for controlling proper airflow especially in cold aisle/hot aisle applications.

Details

This specific flat spacer blank is 1U. A U (unit) is the standard size for a single rack interval. While others can be 2U and 3U, there will be no such waste of space here. This blank spacer is 19 inches long, which is average for most rack panels. It is .06 inches thick, so it is extremely thin. The blank spacer is also 1.72 inches high, which is roughly standard for most patch racks.

Besides all this, you get a lightweight product that is just over a pound - making it extremely easy to get mounted up with the rest of your rack panels. With a limited lifetime warranty provided by Kendall Howard themselves, you can’t really go wrong with this product.

Kendall Howard 12-24 Cage Nuts 50 Pack

Kendall Howard

Kendall Howard is one of the top companies out in the rack mount market. They provide high-quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

The Kendall Howard 12-24 cage nuts create a threaded mounting hole for mounting equipment onto universal rack rails commonly found in server enclosures, open frame racks, and wall mount cabinets. Universal mounting rails, also known as cage nut style rails, are the most common and preferred type of rails used on the market today.

Specifications

Each nut and spring steel cage features wings that can be compressed to snap into the square holes found in universal or punched panel rails. These nuts are able to be easily replaced if stripped, compared to if an entire screw gets stripped.

This specific package comes with one hundred in it, so you should have plenty to go around. If this sounds great to you, which it should, go ahead and add some to your cart today.

Kendall Howard 1902-1-001-01 1U Cable Routing Blank

Kendall Howard is one of the top companies out in the rack mount market. They provide high quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

The Kendall Howard 1U Cable Routing Blank provides the perfect way to route cables within a rack. With this simple device, cables can easily be managed within a cabinet, cutting back on time consuming maintenance as well as avoiding unwanted damage to cables and components.

This 1U cable routing blank is 19” EIA compliant, so you can use it with nearly any rack mount solution that you plan to use. Cable routing panel can be installed to safely direct cables from left to right or front to back. Of course, we recommend you use Kendall Howard with this piece of equipment for best results! However, it is not required. As long as the dimensions match up, you’ll be perfectly fine.

Details

This cable routing blank comes with seven, large open cut-outs that provide ample room for routing various cables such as copper, fiber optic, telecom, and power cables. When you have smaller cable bundle installations, the use of the included tool-less clips makes installation easy with universal cage nut style rails. For heavier cable bundles the use of rack screws and cage nuts are recommended.

As far as the cut-outs themselves, they come with rounded edges to allow for you to not have to worry about injury to yourself or equipment when installed. What possibly could you wish for more than this? Perhaps no injury to your wallet, I bet you’re saying. Well, this is FireFold. Of course your wallet will be feeling just fine afterwards!

Kendall Howard DVR Security Lock Box 15"- 21" Depth

Kendall Howard is one of the top companies out in the rack mount market. Their merchandise ranges to various products besides rack mounts alone, though, and are always high-quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

What you have here in front of you now is a great lockbox for your electronics. The Kendall Howard Security Lockbox is perfect for securing just about any device, from Digital Video Recorders to sensitive network appliances, and even tower computers. This unique product mounts to just about any wall surface giving you the peace of mind that your sensitive electronics are secure and safe.

Kendall Howard manufactures and stocks one of the strongest DVR boxes available. It is made from heavy gauge steel. The hinge for the door is built into the frame and recessed to prevent tampering. The door itself can swing out up to 270 degrees, handy for accessibility. The Kendall Howard DVR / VCR Security Lock Box even allows for up to two 4" fans to be installed inside. Plus, all of these are made in the USA and backed by Kendall Howard’s Limited Lifetime Warranty.

What else could you really ask for? Well, suppose you could ask for a puppy. To tell the truth, who doesn’t want a puppy? Some people might not, but most people do. Nothing wrong with that! Puppies are absolutely adorable. However! They have nothing to do with electronics. So, sadly, you will not get one with this deal. However, you will get a great product at a great price. Don’t believe us? Just look at the price in the upper right-hand corner. Your wallet is going to thank you on how much money you save by buying with us. So, no need to apologize to us.

Kendall Howard 1U Vented 4-Point Adjustable Rack Shelf

Kendall Howard

Kendall Howard is one of the top companies out in the rack mount market. They provide high-quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

The Kendall Howard 1U Vented 4-Point Adjustable Rack Shelf is the perfect addition to any 4-post rack or cabinet. The split design allows the 1U vented rack shelf depth to be adjusted from 22” to 36”. Save yourself the time and frustration of trying to find a 1U vented rack shelf to fit a specific depth, and let this versatile solution meet all your shelving needs.

Details

What more could you love about this great vented rack shelf? Plenty! For example, it’s heavy-duty. So, it’s able to hold up to 250 lbs with ease. Each rack shelf also has a four-point mounting, good for heavier loads being held on it. Plus, with rounded corners, you won’t damage yourself or your equipment if you happen to nudge into it.

If you’re looking for the top of the line with plenty of airflow and adjustability, look no further! Go ahead and get yourself squared away without any further delay!

Kendall Howard 2 Unit Flat Spacer Blank

Kendall Howard is one of the top companies out in the rack mount market. They provide high-quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

The Kendall Howard 2U Flat Spacer Blanks are a cut above the rest. Spacer blanks are often used as a way to fill in any gaps and conceal empty rack spaces in a rack or enclosure. The use of filler panels not only makes racks look neat, clean, and organized, but when installed properly they provide added support to the mounting rails. These spacer blanks are also critical for controlling proper airflow, especially in cold aisle/hot aisle applications.

Details

This specific flat spacer blank is 2U. A U (unit) is the standard size for a single rack interval. While others can be 3U, there will be no such waste of space here. This blank spacer is 19 inches long, which is average for most rack panels. It is .06 inches thick, so it is extremely thin. The blank spacer is also 3.47 inches high, which is roughly standard for most patch racks that have around 24 ports.

Besides all this, you get a lightweight product that is just below two pounds - making it extremely easy to get mounted up with the rest of your rack panels. With a limited lifetime warranty provided by Kendall Howard themselves, you can’t really go wrong with this product.

Kendall Howard 12" Vented Light Duty Rack Shelf

The Kendall Howard 2U 12" Vented Light Duty Rack Shelf constructed of top grade US steel that helps to maintain proper air circulation in your racks and cabinets. Rated to hold up to 45 lbs., this cantilever rack shelf is perfect for supporting monitors, switches and other lightweight network or A/V equipment.

• 12" depth
• 45 lb. weight capacity
• Venting pattern allows for maximum air flow
• 19" EIA compliant
• Made in the USA
• Limited Lifetime Warranty

Kendall Howard 18" Deep Open Frame Wall Rack

The 18” Deep Open Frame Wall Rack has a feature-rich, dual-frame design making it easy for IT technicians to install. This sturdy, open frame rack permits 18” of usable depth to house network switches, patch panels, A/V devices, and other non-rack-mountable equipment. For convenient cable routing in and around the installed equipment, use any of the cable lacing points found on the top and bottom of this 2-piece open wall rack. The 18” Deep Open Frame Wall Rack is sleek, with a simplistic design, making it a strong and durable solution for your next network system.

• Two-piece design
• 18” usable depth
• 10-32 tapped rails
• Includes 25 rack screws
• Ships knockdown
• 130 lb. weight capacity
• 19” EIA compliant
• Made in the USA

Kendall Howard (18U) Fixed Wall Mount Cabinet

Kendall Howard is one of the top companies out in the rack mount market. They provide high-quality products at a great price. These items, in general, are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

If you are looking for the right wall mount rack at the right price, the LINIER brand is the solution for you. The feature rich design gives you a universal enclosure, guaranteed to function for a variety of applications.

Details

What you have here is a great, EID compliant wall rack mount that is rated to hold 250 pounds. In case you ever wonder how much weight that is, it’s roughly the weight of a fully grown kangaroo. That’s right, you have a wall rack mount right here that could hold a kangaroo! Not that you would, we’re just saying.

The cabinet itself weighs 73 pounds, so it will definitely be at least a two person job to install onto the wall. However, once it is set into place, we have a lot of features that will make your life easier. It comes with adjustable rails, removable side panels, and even a reversible glass door. These are all great for accessibility and adjustability once it has been set into place. Plus, you get locking doors and side panels - allowing you to make sure your equipment is safe and secure.

With a sleek black finish and a basic, cost-effective design - you really couldn’t ask for more. You get a five-year limited warranty and a great price, so no more excuses. Get your hands on this today for your project! You’ll be glad you did.

Kendall Howard 2U 14" Non-Vented Cantilever Rack Shelf

The Kendall Howard 2U 14” Component Rack Shelf is one of our heavy-duty component rack shelves. This shelf has a 120-pound weight capacity and it will easily support servers, tower computers, monitors, batteries, and UPS's. When equipment needs to be put in a rack, ask for Kendall Howard and protect your investment.

2U 14" Component Shelves have 4 mounting holes per U space and rounded corners.

Kendall Howard 2U 4-Point Adjustable Shelf

Kendall Howard 2U 4-Point Adjustable Rack Shelves are the most versatile adjustable shelf available. This shelf adjusts from 22” to 40” and therefore it is no longer necessary to figure out the depth of the rails in the rack. This shelf will work with every 19" EIA compliant 4-post rack or server cabinet on the market today.

The Kendall Howard 4-Point Adjustable Shelf allows the full depth of the rack to be used because the entire shelf plate adjusts rather than just the mounting flanges. They are in stock and ship the same day!

Works with all 19" EIA Compliant 4-Post Racks and Server Rack Cabinets

Kendall Howard 2U Vented Economy Rack Shelf

Kendall Howard offers a diverse line of rackmount component shelves, including the LINIER® Economy 2U 14.75" Vented Component Rack. This rack is one of our value-line shelves and was designed to accommodate any standard 19" rack. Designed with a vented base, this rack shelf allows for the needed air to circulate around your network equipment. The dependable LINIER® Economy Vented 2U 14.75" Rack Shelf is capable of holding up to five times its weight.

• Low-cost light duty shelf
• 25 lb. weight capacity
• 14.75" deep
• 19" EIA compliant
• Made in the USA