All

Tripp Lite's Category 6 Patch Panels offer you all the functionality and compatibility as any name brand. Each panel comes with 110-type termination, while meeting and exceeding EIA/TIA TSB-40 Category 6 connecting hardware specifications. Color coded for both EIA/TIA 568A & 568B installations. 48 ports ensure a wide range of plug-n-play options. The clear numbering on both the front and back of each panel gives you a quick and easy way to identify cable runs and the high density 19in wide, 2U High, panel design will save you valuable space in on the rack.

Tripp-Lite SWIVEL6 6-Outlet Surge Protector

The SWIVEL6 offers reliable surge and line noise protection. Premium features include a compact, direct plug-in design for easy portability, 3 rotatable outlets and 3 stationary outlets for easier plug connection and removal and 1200 joules of surge absorption protection. Diagnostic LEDs alert you to potential wiring or protection faults before connected equipment is damaged.

• 3 rotatable outlets
• 3 stationary, side facing outlets
• Direct plug-in design
• 1200 joule rating
• Diagnostic LEDs

24-Port 1U Rack-Mount Cat6/Cat5 110 Patch Panel, 568B, RJ45 Ethernet, TAA

Tripp Lite's Category 6 Patch Panels offer you all the functionality and compatibility as any name brand. Each panel comes with 110-type termination, while meeting and exceeding EIA/TIA TSB-40 Cat6 connecting hardware specifications. Color coded for both EIA/TIA 568A & 568B installations. 24 ports ensure a wide range of plug-n-play options. The clear numbering on both the front and back of each panel gives you a quick and easy way to identify cable runs and the high density 19in panel design will save you valuable space in on the rack.

• 19-in. rackmount ready, 1U height ( 1.75" )
• EIA/TIA 2/32 spacing
• 110 type punchdown termination
• Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

The SRWO8U22 SmartRack 8U/12U/22U Expandable Flat-Pack Low-Profile Switch-Depth Wall-Mount 2-Post Open-Frame Rack stores and organizes EIA-standard 19-inch rack equipment compatible with 2-post mounting in network wiring closets, back offices and other secure IT areas with limited floor space where a locked enclosure is not required. Mounted to the wall or resting on the floor, this rack offers fast, easy access to network components and cabling.

Constructed from heavy-duty steel with a durable black powder-coated finish, the rack has a maximum load capacity of 150 pounds. The expandable design allows you to assemble the rack in an 8U, 12U or 22U configuration to meet your current needs, while leaving rack space in reserve for future expansion.

The rack is simple to assemble and mount to the wall. Threaded 12-24 mounting holes and numbered rack spaces make equipment installation easy. The vertical mounting rails accommodate equipment up to 18 inches deep, such as network switches and patch panels. Assembly and equipment-mounting hardware is included.

• Perfect for network wiring closets, back offices and other secure areas with limited floor space where a locked enclosure is not required
• Stores and organizes EIA-standard 19 in. rack equipment compatible with 2-post mounting
• Maximum load capacity of 150 lb.

• Assembles in 8U, 12U or 22U configuration to meet current needs
• Expands to add equipment later without having to buy a bigger rack
• Allows easy access for installing, configuring and servicing equipment and cabling

• Wall-mounting holes spaced 16 in. apart for standard wall stud placement
• Vertical mounting rails accommodate equipment up to 18 in. deep, such as network switches and patch panels
• Rails support threaded-hole equipment mounting
• Rack spaces numbered for easy reference
• Includes assembly and equipment-mounting hardware

Dependability, Reliability and Durability Rolled Into One

Anyone who has ever been on a job site can tell you that an extension cord is a lot more than it appears to be on the surface. It's one of those items that will prove its worth time and again - provided that you've got a high quality solution to turn to in the first place. When properly designed, an extension cord can be a productivity tool. It can be an essential installation accessory. It can be a safety item and a way to facilitate mission-critical communication across an environment, essentially all at the same time. When you've got a job that matches this type of description, you need to know that you can turn to the best - and "the best" is precisely what the Tripp-Lite extension cord is all about.

In a lot of ways, this is more than just another extension cord. It's a full six foot, medium duty power extension cord that allows you to effortlessly extend the length of any existing power cord that you're working with by an additional six feet in a matter of seconds. It features a rugged NEMA 5-15R receptacle and features a matching NEMA 5-15P plug. It was constructed from a high quality 16 AWG wire and is rated at 13 AMP, 120 volts.

Constructed entirely in North America, the Tripp-Lite extension cord is also RoHS compliant and is suited for all power cord applications that you may have. That includes use with not only your PC and monitor but also your server, your PDU, any universal power system that you may be working with an more. It features a sleek black color and three conductors that you can always rely on, making it more than suitable for any challenge that you may have ahead of you.

Note that when you order your Tripp-Lite extension cord directly from FireFold, you also get to enjoy a wide range of additional benefits that you won't find anywhere else. These include not only the best customer service in the industry and a 100% safe shopping experience but also a full lifetime warranty, fast and easy returns, a full 60 day money back guarantee and same day shipping (in most circumstances). Truly, it doesn't get much better than that.

Tripp-Lite 1U Rack-Mount Power Strip RS-1215-RA

1U Rack-Mount Power Strip, 120V, 15A, 5-15P, 12 Outlets (Right-Angled Widely Spaced), 15-ft. Cord

• 12 NEMA 5-15R outlets are spaced apart to accommodate bulky transformers
• Lighted on/off switch with plastic cover is protected against accidental turn-off
• 15 ft. cord with NEMA 5-15P plug is long enough to reach distant AC outlet
• Versatile installation on wall, under counter or in 1U of rack space

Tripp-Lite Rackmount Server Power Strip RS-0615-R 1U

Tripp Lite's RS-0615-R power strip offers 15 amp capacity AC power distribution in a versatile multi-mount cabinet. Detachable mounting flanges are configurable for rackmount, wallmount and under-counter installation. Uses only 1 rack space (1U) when installed in any 19 inch rack meeting EIA standards. Unfiltered electrical pass-through makes RS-0615-R ideal for distributing alternate waveform UPS or generator power in rack enclosures, network closets and more. Includes 6 rear-facing NEMA5-15R outlets, 15 ft AC power cord and lighted switch with latching safety cover prevents risk of accidental turn-off.

PLUG/OUTLETS: Input: NEMA 5-15P/Output: 6 Rear-facing NEMA5-15R

ELECTRICAL: 120V AC, 50/60Hz, 15A (Requires standard NEMA 5-15R wall receptacle)

FORMAT: Supports 19 in. rackmount (uses 1 rack space/1U), wallmount, under-counter and more

Tripp-Lite SRW6U SmartRack Wall-Mount Enclosure Cabinet

Tripp Lite 6U Low-Profile Wall-Mount Rack Enclosure Cabinet, Removable Side Panels, 15H x 24W x 18D

The SRW6U 6U Wall Mount Rack Enclosure Cabinet is designed to integrate wall-mounting, easy equipment access, and cable management in IT network applications with limited floor space. Ventilated front door and side panels allow generous airflow to keep equipment operating safely. Adjustable rack rails with square mounting holes accommodate up to 6U of standard 19" rackmount equipment. Supports up to 140 lbs of equipment. A sturdy wall-mount bracket allows the cabinet to quickly be hung on the wall.

Tripp-Lite Single-Phase Basic PDU1.8 kW PDU1215

The PDU1215 1.8kW Single-Phase 120V Basic PDU is the perfect no-frills unit for networking, telecom, security, audio/video and sound reinforcement applications. Perfectly suited for high-density IT environments, the PDU1215 features a single breakered load bank with 13 NEMA 5-15R outlets—12 in the rear and one in front. The NEMA 5-15P input plug with long 15-ft. (4.57 m) cord connects to your facility's compatible AC power source, generator or protected UPS to distribute power to connected equipment.

The switchless design prevents an accidental shutdown, which could lead to costly downtime. A 15A circuit breaker protects connected equipment from dangerous overloads. The reversible all-metal housing mounts in 1U of space in EIA-standard 19-inch racks, as well as on a wall or workbench or under a counter. With a compatible rack and Tripp Lite's PDUSIDEBRKT accessory (sold separately), you can adapt the PDU1215 for vertical 0U rack-mounting.

Tripp-Lite ULTRA Isobar 6-Outlet Surge Protector ISOBAR6

Premium protection for essential network workstations, telecom systems, point-of-sale equipment and audio/video systems, the ISOBAR6ULTRA Isobar® 6-Outlet Surge Protector features a network-grade surge protection rating of 3330 joules to defend your sensitive electronics against even the strongest surges and spikes. In fact, Tripp Lite will repair or replace any connected equipment damaged by surges, including direct lightning strikes, up to $50,000 for life (valid in the U.S., Canada and Puerto Rico only).

Because residential power outlets have three wires—hot line (H), neutral (N) and ground (G)—the ISOBAR6ULTRA protects all three, covering the two protection modes: full normal mode (H-N) and common mode (N-G/H-G).

Your devices plug into six widely spaced NEMA 5-15R outlets, which are arranged in three exclusive isolated filter banks. These internal barriers filter out electromagnetic interference (EMI) and radio frequency interference (RFI) that can disrupt your electronics and inflict hardware damage or data loss.

Included safety covers block accidental contact with unused outlets. An integrated 12A circuit breaker protects all outlets and shuts down connected equipment in case of overload. The lighted on/off switch provides one-touch control over connected equipment. Diagnostic LEDs confirm power, protection and line fault status. The six-foot AC power cord includes a space-saving right-angle NEMA 5-15P plug.

Keyspan USB to Serial Adapter - USB-A Male to DB9 RS232 Male, 3 ft. (0.91 m), TAA

The USA-19HS Keyspan® High-Speed USB-to-Serial Adapter allows you to connect a serial device to a computer or laptop with a USB Type-A port. Widely recommended by serial device manufacturers, the USA-19HS attaches to switches, routers, barcode scanners, GPS units, point-of-sale devices, lab equipment, network storage devices and other devices with a 9-pin serial port. The included 3-foot detachable cable supports data transfer speeds up to 230 Kbps—twice as fast as a built-in serial port. The USA-19HS works with any USB cable up to 16 feet. An LED indicates data activity. This adapter requires no external power and, at just 2 ounces, packs away easily in your laptop bag for use on the go. Windows line monitor and data trace software included. Easy to upgrade with free software downloads. Works with Windows (up to 10) and Mac OS X (up to 10.13). Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.

System Requirements

• Computer with an available USB-A port
• Compatible with Windows 2000, XP, Vista, 7, 8, 10, 11, Windows 2008 Server R2, Windows Server 2012
• Compatible up to macOS Ventura 13.3.1

Note: Computer should have Administrator access to avoid potential installation issues when first installing drivers. When attempting to use most recent driver with an existing USA-19HS unit, it is critical that the old drivers be uninstalled from the computer before downloading and installing the newer driver. Even though the old driver no longer works, the Device Manager will still attempt to use it.

1.4kW Single-Phase Metered PDU, 120V Outlets (13 5-15R), 5-15P, 100-127V input, 6ft Cord, 1U Rack-Mount

•  Local metered single phase 12A 100-127V PDU
• 1U horizontal rackmount, Digital current meter
• NEMA 5-15P input with 6ft / 1.8m line cord
• 13 NEMA 5-15R outlets (1 front / 12 rear)
• Reversible housing, 4.5 in / 11.4cm depth

SmartPro LCD 120V 1500VA 900W Line-Interactive UPS, AVR, 2U Rack/Tower, LCD, USB, DB9 Serial, 8 Outlets

Provides complete battery backup and pure sine wave power output for your desktop computer, network workstation, audio/video components or media center.

• Protects equipment against blackouts, brownouts, overvoltages, surges and line noise
• Keeps AC power running during blackouts to allow time for file saves and safe shutdown
• Maintains continuous 120V nominal output during brownouts and overvoltages
• ENERGY STAR-certified to save electricity, lower costs and protect the environment
• Front-panel LCD reports detailed voltage, runtime, load and battery information

Tripp-Lite 14-Outlet Server Surge Protector DRS-1215

DRS-1215 offers surge and noise suppression in a versatile all-metal multi-mount cabinet. Detachable mounting flanges are configurable for rack-mount, wall-mount and under-counter installation. Uses only 1U when installed in any 19-inch EIA-standard rack. Includes 14 outlets (6 front/8 rear), 15-foot (4.6-meter) cord and guarded power switch to reduce the risk of accidental shutoff. Diagnostic LED indicates surge protection status.

• 14 outlets / 15-ft. (4.57 m) cord
  
• 3000 joule rating
  
• Adjustable rackmount hardware

Protect It! Surge Protector with 4 Side-Mounted Outlets, Direct Plug-In, 720 Joules

The TLP4BK Surge Suppressor from Tripp Lite has 4 side-mounted outlets (including 2 transformer-friendly outlets), a convenient direct plug-in design and diagnostic LEDs. The unit has a surge suppression rating of 720 joules to handle the strongest surges.

Tripp-Lite RS-1215-20T 1U Rack-Mount Power Strip

Tripp Lite's RS-1215-20T Power Strip offers 20A capacity AC power distribution in a versatile multi-mount cabinet. Detachable mounting flanges are configurable for rackmount, wallmount and under-counter installation. Uses only 1 rack space (1U) when installed in any 19-in. rack meeting EIA standards. Unfiltered electrical pass-through makes RS-1215-20T ideal for distributing alternate waveform UPS or generator power in rack enclosures, network closets and more. Includes 12 NEMA5-15/20R outlets (6 front/6 rear), 15-ft. AC power cord with locking NEMA L5-20P input plug and lighted switch with cover that prevents risk of accidental turn-off.

Tripp Lite's SmartRack Wall-Mount Roof Fan Kits are the ideal solution for increasing ventilation in wall-mount enclosure cabinets. Each kit features multiple high-performance fans that can be installed to the inside or outside of the wall-mount enclosure to expel heat out of the enclosure.

COMPATIBLE SMARTRACK WALL-MOUNT ENCLOSURES - SRW6U, SRW9U, SRW10US, SR12UB, SRW12U, SRW12US, SRW12US33, SRW12USG, SRW18US, SRW26US, and other Tripp Lite SmartRack Enclosures that specify the use of this accessory.

1U Rack-Mount Power Strip, 120V, 15A, 5-15P, 12 Outlets (6 Front-Facing, 6-Rear-Facing), 15-ft. Cord

The RS-1215 Power Strip offers 15A capacity AC power distribution in a versatile multi-mount cabinet. Detachable mounting flanges are configurable for rack-mount, wall-mount and under-counter installation. Uses only 1U when installed in any 19-inch rack meeting EIA standards. Unfiltered electrical pass-through makes RS-1215 ideal for distributing alternate waveform UPS or generator power in rack enclosures, network closets and more. Includes 12 NEMA 5-15R outlets (six front/six rear), 15-foot (4.6-meter) cord and lighted switch with cover prevents risk of accidental turn-off.

• Designed for standard 19-inch racks (1U high)
• 12 outlets (6 front / 6 rear)
• 15-amp circuit breaker
• 15-ft. (4.57 m) cord

Tripp Lite Metered PDU / Power Distribution Units offer real-time local reporting of load level in amps via built-in digital meter. Enables visual current monitoring of PDU output current to prevent circuit overloads as additional equipment is added. Offers reliable rackmount multi-outlet power distribution from any protected UPS, generator or mains input power source. High quality design includes rugged all-metal housing and secure rackmount installation with included mounting accessories.

1U Rack-Mount Power Strip, 120V, 20A, 5-20P, 12 Outlets (6 Front-Facing, 6-Rear-Facing) 15 ft. (4.57 m) Cord

The RS-1215-20 Power Strip offers 20A capacity AC power distribution in a versatile multi-mount cabinet. Detachable mounting flanges are configurable for rack-mount, wall-mount and under-counter installation. Uses only 1U when installed in any 19-inch rack, meeting EIA standards. Unfiltered electrical pass-through makes RS-1215-20 ideal for distributing alternate waveform UPS or generator power in rack enclosures, network closets and more. Includes 12 NEMA 5-20R outlets (six front/six rear), 15-foot (4.6-meter) cord and lighted switch with cover prevents risk of accidental turn-off.

• Designed for standard 19-inch racks (1U high)
• 12 outlets (6 front / 6 rear)
• 15-ft. (4.57 m) cord
• 20-amp circuit breaker

Tripp-Lite Protect It! 7-Outlet Surge Protector TLP74RB

Tripp Lite's TLP74RB offers economical AC surge suppression for protection of workstations, desktop PCs, telecom systems and other sensitive electronics. Built-in AC surge suppression shields connected equipment from damage and performance problems due to transient surges. TLP74RB offers 7 total outlets (6 at right angle and 1 designated transformer plug outlet), 4 foot cord and diagnostic LED to warn of suppressor damage. AC suppression rated at 540 joules shields equipment from surges and line noise. Attractive black housing with keyhole mounting tabs offering convenient protection of desktop computer equipment and accessories. 

• 6 right-angle NEMA 5-15R outlets (7 total)
• 1080-joule surge protection rating
• Filters out threatening EMI/RFI line noise
• 15A resettable circuit breaker prevents dangerous overloads
• 4 ft. AC power cord with NEMA 5-15P plug

Tripp Lite's SmartRack SRSHELF2PDP is a 2U cantilever mount fixed shelf. Cantilever shelf supports monitors and other equipment with a 60lb capacity. Shelf is compatible with 2 or 4 post rack enclosure cabinets. The SRSHELF2PDP is 21 inches in depth but can use two shelves back to back to create a deep fixed shelf in 2POST racks. Required mounting hardware is included.

Bring Your NetDirector KVM Switch Together, Finally

Modern day networking solutions can't just work - they need to work exceedingly well. They're intended to support the mission critical infrastructure that allows both our personal and professional lives to function. It can't just "get the job done." It has to get the job done in the best possible way right out of the gate or it isn't really a "solution" at all.

Such is the case with Tripp Lite's 6 foot USB (2 in 1) KVM cable kit - a powerful option designed to bring your USB computer and the company's own B020 and B022 series KVM switches together in perfect harmony, just the way you need.

Even at a cursory glance, this product has it all - it's a premium 2 in 1 cable that is built to provide superior performance and exceptional cable management by way of a USB keyboard and mouse cable AND a rugged monitor cable, all bonded into the same sleek and simple unit. Not only that, but it's designed to be wonderfully low profile - making effective cable management the absolute breeze you always hoped it could be. The computer side of the cable kit consists of a standard HD15 male cable and a USB A male cable. The molded ends provide an easy-grip textured over mold and the product itself is super flexible and very easy to control.

Please note that as is true with all of Tripp Lite's other solutions, this cable it is manufacturer using only the highest quality molded cable and features integral strain relief and foil shielding. Both of these qualities go a long way towards guaranteeing the maximum EMI and RFI protection that you need when you need it the most.

Equally important to note is that when ordering from FireFold, you get to enjoy a wide range of benefits that you won't find anywhere else like same day shipping in most situations, a full 60 day money back guarantee and an industry leading lifetime warranty. Even in the unfortunate event that you need to make an exchange, you'll benefit from our fast and easy returns process that was built from the ground up with your convenience in mind.

SmartRack Roof-Mounted Fan Panel - 6-120V high-performance fans; 630 CFM, 5-15P plug

SmartRack® SRFANROOF is ideal for increasing the ventilation in all rack enclosure server cabinets. The unit features six 120V high-performance fans mounted in a roof panel, six-foot (1.8-meter) cord with NEMA 5-15P input plug, and includes toolless mounting hardware.

• Roof Mount Fan Panel - 120V
• Ideal for increasing the ventilation of SmartRacks
• Features (6) 120V fans mounted in a roof panel, 6-ft. (1.83 m) cord
• Toolless mounting hardware included
• Cold rolled steel with black finish
• 2A current draw

COMPATIBLE SMARTRACK ENCLOSURES: SR25UB, SR25UBKD, SR25UBSP1, SR25UBTAA, SR42UB, SR42UBCL, SR42UBEXP, SR42UBG, SR42UBKD, SR42UBSP1, SR42UBTAA, SR45UB, SR48UB, SR48UBCL, SR48UBEXP, SR48UBSP1, SR42UBTAA and other SmartRack enclosures that specify the use of this accessory.

500VA 300W 120V Line-Interactive UPS - 6 NEMA 5-15R Outlets, USB, DB9, Network Card Option, 1U Rack/Tower

Tripp Lite's SMART500RT1U intelligent, line-interactive rack/tower uninterruptible power supply prevents data loss, downtime and equipment damage due to power outages, voltage fluctuations and transient surges. Requires only one rack space (1U) in a 2 or 4 post rack, with included accessories for upright tower placement. Large internal batteries offer 14.6 minutes half load runtime and 3.2 minutes at full load. Maintains regulated 120V nominal output without using battery power during brownouts as low as 90V. 500VA/300 watt power handling capability is compatible with networking, telecom and other sensitive electronic applications. Includes 6 UPS supported outlets with a single outlet load bank that can be individually controlled via software interface to reboot select equipment on demand or shed less significant loads to extend battery runtime for more critical equipment. Includes 1 surge-only outlet for peripherals not requiring battery backup.

Supports simultaneous remote monitoring of UPS and site power conditions via built-in USB and DB9 monitoring ports. PowerAlert UPS monitoring and unattended shutdown software is available for free download. Emergency Power Off (EPO) interface offers option for instantaneous power-off of UPS and connected equipment in the case of fire or emergency situation. Multi-function audible alarms and set of 5 front panel LEDs offer at-a-glance notification of UPS and line power status. Network-grade AC surge suppression protects equipment from damage and performance problems resulting from transient surges and line noise. Attractive all-black color scheme.

1.9 kW Single-Phase Metered PDU, 120V Outlets (28 5-15/20R), L5-20P/5-20P Adapter, 15ft Cord, 0U Vertical

• Local Metered single phase 120V 16A 0U 60in / 152cm vertical rackmount PDU
• Two-digit current meter reports output current in amps
• Attached 15-ft. (4.57 m) cord with NEMA L5-20P plug and 5-20P adapter
• 28 NEMA 5-15/20R outlets
• Toolless button mount and bolt-down bracket installation hardware included

SmartRack 12U Low-Profile Switch-Depth Wall-Mount Small Rack Enclosure, Hinged Back

The SRW12US SmartRack® 12U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 200 pounds (90.7 kilograms).

The cabinet swings away from the wall on a sturdy hinge, allowing easy back-door access to equipment and cabling during installation and maintenance. The doors and side panels lock securely to help prevent damage, tampering or theft. The front, top, bottom and removable side panels are vented, which allows air to flow freely and keep equipment cool. The reversible doors can open left or right by rotating the cabinet 180 degrees before mounting. Convenient top and bottom ports allow easy cable routing.

The SRW12US comes fully assembled and ready to mount to the wall, or use the optional SRCASTER rolling caster kit (sold separately) to make it a mobile rack. Square and 12-24 threaded mounting holes and numbered rack spaces make equipment installation easy. The vertical mounting rails adjust in 7/8-inch increments to accommodate equipment up to 20.5 inches deep, such as network switches and patch panels.

• Maximum load capacity of 200 lbs (90.7 kgs)
  
• Swings away from wall on hinge for easy back-door access
  
• Locking steel cabinet vented at sides, front, top and bottom
  
• Flow-through ventilation keeps equipment cool
  
• Secures 12U of 19 in. rack equipment up to 20.5 in. deep

Tripp-Lite SNMP Management Accessory Card for UPS Systems

SNMP/Web Management Accessory Card, SmartPro or SmartOnline UPS Systems

Computer Power Cord, NEMA 5-15P to Right-Angle C13 - 10A, 125V, 18 AWG, 10ft

Computer power cord with right-angled C13 plug allows connection of a PC, monitor or printer in a tight space or at an awkward angle.

• Right-angle C13 plug allows easier connection in confined or hard-to-reach spaces
• Recommended for powering computers, printers and other compatible peripherals
• Adds 10-ft. (3.05 m) to your existing power connection to provide flexibility in placing devices
• Ideal replacement for worn-out or missing computer power cable
• NEMA 5-15P plug connects to AC power; C13 plug connects to device's C14 inlet

SmartRack 1U Cantilever Fixed Shelf (40 lb / 18 kg capacity; 12-in. / 305 mm depth.)

Fixed Shelf, 1U Cantilever mount, Cold rolled steel with black finish. Required mounting hardware included. Supports up to 40 lbs (18.1 kgs)

Use two shelves back to back to create a deep fixed shelf in 2POST racks.

• Fixed Shelf, 1U Cantilever mount. Required mounting hardware included
• 2 or 4 post rack compatible
• 12 inch shelf depth
• Cantilever shelf supports monitors and other equipment
• Cold rolled steel with black finish.
• Use two shelves back to back to create a deep fixed shelf in 2POST racks
• 5-year limited warranty

7-Outlet Surge Protector, 12 ft. Cord, 1080 Joules, Diagnostic LED, Black Housing

Perfect for your home or office workstation, the TLP712B Protect It!® 7-Outlet Surge Protector features a surge protection rating of 1080 joules to defend your sensitive electronic components against strong surges and spikes.

Because residential power outlets have three wires—hot line (H), neutral (N) and ground (G)—the TLP712B protects all three, covering the two protection modes: full normal mode (H-N) and common mode (N-G/H-G). It also filters out electromagnetic interference (EMI) and radio frequency interference (RFI) that can disrupt your electronics and inflict hardware damage or data loss.

Your devices plug into seven NEMA 5-15R outlets, one of which is spaced apart to accept a bulky transformer without blocking adjacent outlets. An integrated 15A circuit breaker protects all outlets and shuts down connected equipment in case of overload. The lighted on/off switch provides one-touch control over connected equipment. A diagnostic LED confirms your connected equipment is protected.

The 12-foot (3.7-meter) AC power cord with NEMA 5-15P plug gives you enough flexibility to reach distant outlets while fitting easily into your workstation or home theater setup. Keyhole slots incorporated into the bottom panel provide convenient wall or desk mounting options for the black plastic housing.

2kW Single-Phase Local Metered PDU + ISOBAR Surge Suppression, 3840 Joules, 100-127V Outlets

• Local Metered single phase 16A 120V PDU with ISOBAR Surge Suppression
• 1U Horizontal rackmount, Digital current meter
• 3840 Joule suppression rating, Diagnostic LEDs
• NEMA L5-20P input with 5-20P adapter; 15-ft. / 4.57 m line cord
• 12 NEMA 5-20R outlets (rear), 2 5-15R outlets (front)
• Reversible housing; 4.5in /11.4cm depth

Medical-Grade Power Strip; 6 15A Hospital-Grade Outlets w/ 15ft Cord

The PS-615-HG-OEM Medical-Grade Power Strip supplies power to movable plug-connected components mounted to a rack, table or pedestal in operating rooms, patient-care vicinities, therapy rooms, imaging environments and administrative areas. Compliant with UL 1363A specifications, this 120V, 50/60 Hz power strip features a NEMA 5-15P-HG hospital-grade plug and six NEMA 5-15R-HG hospital-grade outlets that include integrated locking safety covers.

The power strip is protected by a antimicrobial powder coating. Antimicrobial protection helps prevent the growth of bacteria, viruses, fungi, mold and mildew. The coating meets the requirements of JIS Z 2801:2000, an international standard for evaluating efficacy in antimicrobial products.

Two built-in resettable 15A circuit breakers control power to all outlets and protect the power strip against overloads. Switchless design prevents the unit from being accidentally shut off. The 15-foot (4.6-meter) power cord provides ample reach to the power source.
Mounting tabs and flanges let you install the PS-615-HG-OEM on a wide variety of surfaces, such as IV poles, mobile carts, crash carts and mobile medical workstations. The all-metal housing ensures safety and is guaranteed to last a long time in demanding environments.

Protect It! 6-Outlet Home Computer Surge Protector

The TLP602 offers economical AC surge suppression for workstations, desktop PCs, telecom systems and other sensitive electronics. Built-in AC surge suppression shields connected equipment from damage and performance problems due to transient surges. TLP602 offers six total outlets and two-foot (0.6-meter) cord. AC suppression rated at 180 joules shields equipment from surges and line noise. Attractive gray housing with keyhole mounting tabs and 1 designated transformer plug outlet offers convenient protection of desktop computer equipment and accessories.

• 6 outlets / 2-ft. (0.61 m) cord
• 180 joule rating

Extend an Ethernet connection up to 550 Meters over Multimode Fiber

Tripp Lite's N784-001-SC-MM 10/100 to Multimode Media Converter ( RJ45 to SC ) is an economical way to extend the distance of network nodes up to 550 Meters by converting Cat5e UTP cables to Multimode Fiber Optic. The Media Converter features automatic MDI/MDI-X configuration, and the UTP port senses the network speed automatically. Auto-detects half or full duplex operation on the fiber port. Power supplied by small form factor AC adapter.

• Extends a 100Mb Ethernet signal up to 550M over Multimode Fiber Optic Cable
• Auto detects Full/Half Duplex Transfer Mode
• Supports Multimode 50/125 cable up to 2KM or 62.5/125 cable up to 550M

System Requirements:

• 10/100 Ethernet Network
• Multimode SC Fiber cable

The Last UPS You'll Ever Need Has Arrived

If your IT infrastructure goes down, you don't just have a problem on your hands - the conditions are officially right for a catastrophe. Every minute that your equipment is offline is a minute that you're losing money, which means that you'd better do whatever it takes to help guarantee that doesn't happen. But when you make the decision to work with the Tripp-Lite SMART1500LCDT SmartPro 120V 50/60Hz Line-Interactive Uninterruptible Power Supply, you're well on your way to guaranteeing exactly that.

At its core, the Tripp-Lite SMART1500LCDT is more than just a battery backup option. It offers features like voltage reduction, surge suppression and impossibly long-lasting battery support for any device that you may be concerned about. That includes but is certainly not limited to personal computers, network workstations, home entertainment systems, complex media centers and absolutely everything in between.

Not only will this help fend off the devastating effects of something like data loss, but it will also help stop viewing interruptions, lost recordings, the loss of component programming and more.

The Automatic Voltage Regulation circuits, also commonly referred to as AVR, constantly regulate brownouts and over voltages from 92 volts all the way up to 150 volts back to ideal, usable levels. The product itself, which sports a stunning all black cabinet design, includes the following:

• 10 built in outlets that are ready to use from the moment you take it out of the box.
• Five of those outlets have full battery backup and surge suppression capabilities, making them critical for your vital system components.
• The other five outlets have surge suppression, making them ideal for those components that do not require battery support.
• It even features a built-in audible alarm and large LCD front panel display so that you always know exactly what is going on, no matter what.

The built-in USB port (cable included) helps to enable an optional, unattended system shutdown - again going a long way towards preventing data loss in the event of an unexpected power failure. The system itself is also designed to work with Tripp-Lite's own free PowerAlert software, which itself is available to download directly from their website and is compatible with all current versions of the Microsoft Windows and Mac OS X/MacOS operating systems.

SmartRack 1U Blanking Panel Kit, Toolless-Mounting, 10 pieces

SmartRack® SR1UPANEL10 is a 19-inch 1U blanking panel kit. The kit includes 10 pieces to fill from 1U to 10U of rack space. SR1UPANEL10 improves cooling efficiency inside the enclosure by filling unused rack space and optimizing airflow and preventing recirculation. Offers toolless mounting and fits any square-hole EIA-compliant enclosure.hole, EIA compliant enclosure.

• 19" 1U Blanking Panel Kit
• 10 pcs. included to fill one to 10U of rack space
• Improves cooling efficiency
• Fills unused rack spaces to optimize airflow and prevent recirculation
• Toolless mounting
• Fits any square hole, EIA compliant enclosure

42U SmartRack Premium Enclosure (includes doors and side panels)

42U SmartRack Enclosure ships mounted on a special pallet that features additional reinforcement and shock-absorbing material. The pallet's protective cushion safeguards the enclosure and the precision components it contains during re-shipping. Reinforced pallets and reusable packaging provide the flexibility to fully configure rack enclosures in a centralized location and safely re-ship them to remote sites, saving significant service costs. They also allow the freedom to custom-configure enclosures with network and server hardware along with UPS systems, PDUs, KVM switches and a variety of other devices prior to final installation.

SmartRack enclosures are designed for secure, high density server and networking applications in IT environments. Designed with provisions to integrate cooling, power distribution and cable management, SmartRack enclosures make ideal homes for mission-critical equipment. Vendor-neutral square hole/cage nut mounting for guaranteed compatibility with all EIA-310-D compliant 19" equipment. Enclosures ship fully assembled for rapid deployment and roll into place on heavy-duty casters. Toolless mounting slots allow quick installation of PDUs and vertical cable managers. Adjustable mounting rails include an easy-view depth index to eliminate time-consuming measurements. Lightweight modular doors and side panels provide safe, convenient service access. Integrated baying tabs facilitate combining enclosures in rows for standard data center baying applications. SmartRack enclosures hold up to 3000 lbs and support cooling, cable management, power distribution and monitoring features that keep critical servers and network equipment operating nonstop. Perforated doors permit massive front to rear airflow that exceeds servers manufacturer requirements. Enclosures are fully compatible with hot-aisle / cold-aisle data center configurations.

• Standard 42U SmartRack enclosure with additional shock pallet and loading ramps.
• 4 interior vertical posts with unthreaded square hole openings
• Standard 24" width for optimizing floor space
• Ships fully assembled
• Massive front to rear ventilation capacity
• 3000 lb stationary / 2250 lb rolling load capacity
• Locking, removable, reversible front and rear doors
• Locking, removable side panels keyed alike with doors
• Meets all enclosure requirements towards PCI DSS (Payment Card Industry
• Data Security Standard) Compliance

The SMART1000LCD SmartPro LCD 120V, 1000VA/500W Line-Interactive Uninterruptible Power Supply provides battery backup and AC power protection against blackouts, brownouts, power surges and line noise that can damage electronics or destroy data. Ideal for backing up your desktop computer or audio/visual components, this line-interactive UPS switches to battery backup mode in milliseconds to keep your connected equipment running long enough to save files and shut down safely with no data loss.

While all eight NEMA 5-15R outlets protect against surges, four outlets also provide up to 3 hours of UPS battery support for a DVR component, 60 minutes of support for a basic desktop PC and LCD monitor, and 10 minutes of support at half load (250W).

Automatic voltage regulation (AVR) corrects undervoltages as low as 89V without using any battery power. EMI/RFI noise filtering improves your equipment’s performance and prevents damage. A 1038-joule surge suppression rating protects your equipment from harmful power surges.

Space-saving NEMA 5-15P plug with 6-foot cord connects to any NEMA 5-15R socket and allows furniture to be placed flush against the wall. Large rotatable LCD screen with dimmer shows real-time input voltage, overload, AVR and battery statuses at a glance. With Tripp Lite’s free PowerAlert software (available via free web download), the SMART1000LCD enables safe unattended system shutdown and file saves in case of a prolonged power failure.

The SMART1500RM2U SmartPro 120V 1.5kVA 1.35kW Line-Interactive Sine Wave UPS provides battery backup and AC power protection against blackouts, brownouts, power surges and line noise that can damage electronics or destroy data. Ideal for backing up servers and network storage devices, the SMART1500RM2U switches to battery mode in milliseconds to keep your connected equipment running long enough to save files and shut down safely with no data loss.

Featuring eight NEMA 5-15R outlets (four switchable) and a 10-foot power cord with 120V NEMA 5-15P input, the SMART1500RM2U has an internal battery that provides 13 minutes of support at half load and 4.5 minutes at full load. A front-panel LCD screen lets you monitor important data, such as load level, voltage, battery charge and estimated runtimes.

Automatic voltage regulation (AVR) maintains 120V nominal output over an input range of 83V to 147V without using battery power. EMI/RFI noise filtering improves your equipment’s performance and prevents damage. A 570-joule surge suppression rating protects your equipment from harmful power surges. With Tripp Lite’s PowerAlert® software (available via free download), the SMART1500RM2U enables safe unattended system shutdown and file saves in case of a prolonged power failure.

1.9kW Single-Phase ATS / Switched PDU, 120V (16 5-15/20R), 2 L5-20P / 5-20P Inputs, 2 12ft Cords, 1U Rack-Mount, TAA

This Switched Automatic Transfer Switch / ATS PDU provides a redundant power option for single-corded network devices. Dual input cords support separate connection to primary and secondary power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. The Java-free LX Platform HTML5-based network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP. Switched PDU features include individually controllable output receptacles and built-in network interface. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. The SmartOnline® series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LEDs display primary or secondary power availability.

• 1.9kW 120V ATS / Switched PDU, Single phase 20A 120V
• Enables redundant A/B power option for single-corded network devices
• Separate primary & secondary inputs connect to any two compatible power sources
• 1U horizontal rackmount; 2 L5-20P / 5-20P inputs; 16 5-15/20R outlets
• Pre-installed WEBCARDLX with latest version of PADM20 for IP-based Auto Probe feature

3.8kW Single-Phase Metered PDU, Dual Circuit, 120V Outlets (32 5-15/20R), L5-20P/5-20P, 10ft Cord, 0U Vertical

• Dual Circuit 71 inch PDU
• Dual Independent Current Monitoring Displays
• 32 NEMA 5-15/20R 120V outlets color coded for each circuit
• Two 16A independent circuits of 16 outlets each
• Color-coded input power cords for each circuit
• Supports connection to NEMA L5-20R or 5-20R 120V 20A wall receptacle
• 2-year limited warranty

1.4kW Single-Phase Metered PDU, 120V Outlets (13 5-15R), 5-15P, 100-127V Input, 15ft Cord, 1U Rack-Mount

• Local metered single phase 12A 120V PDU
• 1U horizontal rackmount, Digital current meter
• NEMA 5-15P input with 15-ft. (4.57 m) line cord
• 13 NEMA 5-15R outlets (1 front / 12 rear)
• Reversible housing, 4.5 in. / 11.4 cm depth

SmartPro 120V 750VA 600W Line-Interactive Sine Wave UPS, 2U, Extended Run, Network Card Options, LCD, USB, DB9

SmartPro® Line-Interactive UPS with enhanced LCD interface offers network-grade power protection for critical server, network and telecommunications equipment. Line-Interactive Uninterruptible Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and overvoltages back to usable levels while maintaining a full battery charge in case of power failure. Interactive LCD interface reports UPS operating mode, detailed UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover from line to battery power occurs within milliseconds to maintain operation of connected equipment without interruption or reboot. 95% line-mode efficiency offers reduced heat emissions and operating costs. Network management interfaces support communications via USB, RS-232 and slot for optional Network Management Card options. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and macOS. Network communications ports enable detailed monitoring of equipment load levels, self-test data and utility power conditions. PowerAlert® UPS monitoring software is available via free download. Switched output load banks enable scheduled and real-time remote reboot and load shedding of select outlets. Emergency Power Off (EPO) interface. LCD display panel easily rotates for viewing in rack-mount or tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-mode configuration options. Programmable self-test. Field-replaceable, hot-swappable battery modules.

• 0.75kVA / 750VA / 600W line interactive 2U rack/tower UPS, Sine Wave
• Extended runtime options up to 450W, Interactive LCD interface
• 95% line-mode efficiency, 2 switched load banks, 4-post mounting kit
• USB, RS232, EPO and slot for network management card options
• 120V NEMA 5-15P input, 6 NEMA 5-15R outlets
• To use the Auto Probe feature, this product requires a WEBCARDLX network interface (sold separately) running LX firmware update 15.5.2 or later

DVI Dual Link Cable, Digital TMDS Monitor Cable (DVI-D M/M), 25-ft.

This DVI Dual-Link TMDS cable delivers the high performance and high bandwidth needed for today's digital video displays. Note: Review your monitor manufacturer's specifications for a stated maximum DVI cable length. While many monitors only support a five-meter (16-foot) DVI cable, simply adding a B120-000 DVI Extender will guarantee full digital signal strength at any length up to 150 feet (45.7 meters). Gold-plated contacts ensure excellent conductivity, while double shielding (foil and braid) provides maximum EMI/RFI protection. Use in conjunction with DVI video cards that are specified as Dual or Single Link. Both DVI connectors are molded, have integral strain relief for long life reliability, and ferrite collars drain off extraneous electrical interference.

• For use with Dual or Single TMDS Link specified equipment
• Compatible with Flat Panel Displays, Digital CRT Displays and Projectors
• Provides bandwidth for resolutions up to 2560 x 1600
• High Speed Digital Transmission to 9.9Gbps
• Superior molded cables with foil/braid shielding for maximum EMI/RFI protection
• Check monitor manufacturers cable length specs - may need B120-000 DVI Extender

Isobar 12-Outlet Surge Protector, 15 ft. Cord, 3840 Joules, Diagnostic LEDs, 1U Rack-Mount

Rack-mount protection for A/V components, network hardware, retail displays, appliances, power tools and other expensive electronics against dangerous surges, spikes and line noise in home, office and industrial environments.

• 12 NEMA 5-15R outlets in exclusive isolated filter banks
• Network-grade 3840-joule surge protection rating
• Durable metal housing designed for tough environments
• 15A resettable circuit breaker prevents dangerous overloads
• 15-ft. (4.57 m) AC power cord with NEMA 5-15P plug

Industrial Power Strip, 6-Outlet, 15 ft. (4.6 m) Cord, Locking Switch Cover

The UL24CB-15 Power Strip offers a convenient method of power distribution in workbench, wall-mount or floor-mount applications. Includes six NEMA 5-15R outlets with 1.625-inch center-to-center spacing, 15-foot (4.6-meter) AC line cord and keyhole mounting tabs for installation in a wide variety of applications. Corded, multi-outlet strip reduces cabling clutter and enables the connection of multiple electrical devices to a single AC wall socket. Unfiltered electrical pass-through makes UL24CB-15 ideal for distributing alternate waveform UPS or generator power. Features rugged all-metal housing, lighted power switch with transparent guard to prevent accidental shutoff, 15A resettable circuit breaker and attractive blue/gray color scheme.

• 6 outlets
• 15-ft. (4.57 m) cord
• 12.5" length
• All metal housing
• Lighted master switch

1.92kW Single-Phase Metered PDU, 120V (12 5-15/20R), L5-20P / 5-20P, 110-127V Input, 15ft Cord, 1U Rack-Mount

Tripp Lite's PDUMH20 provides network-grade power distribution from a UPS, generator or utility source for servers, switches and other rack-mount equipment. The PDU's durable metal housing and industrial-strength components are built for years of reliable service in high-availability environments, like network closets, server rooms and data centers.