Morris Multi-Cable Connector - Black Insulated

Black Insulated Multi-Conductor Electrical Power Connectors 4 Ports 4 - 14 - Dual Side Entry - Our Dual Entry Cable Connector makes electric Splicing & Tapping Simple Fast & Easy

Black Insulated Multi-Conductor Electrical Power Connectors 4 Ports 4 - 14 - Dual Entry features include:

• Wire Entry from Either Side of connector
• Insulated with rugged high-dielectric Rubber/Vinyl Coating
• Pre-Filled with Oxide Inhibitor
• Easy Re-entry for Changes, Inspection or Troubleshooting
• Plugs Marked with Connector Max Wire Size for easy identification
• Dual Entry Cable Connector is CU9AL Dual Rated 6061-T6 Aluminum for use with Copper and/or Aluminum wires
• One Wire per Terminal
• Temperature Range of –49°F to 194°F (–45° to 90°C)
• ANSI C119.4 & cULus 486b Listed thru 750MCM
• Rated 194°F(90°C) 600 Volt
• Dimension Measurements = Inches
• Order Qty of 1 = 1 Piece

Morris Black Insulated In-Line Splice - Morris Electric

Insulated Electrical Power Connector In-Line Splice 4 Set Screws 750-250 MCM - Black Insulated Splice for easy fast hassle free installations

Black Insulated Electrical Power Connector In-Line Splice 750-250 MCM features include:

• 6061-T6 Aluminum CU9AL Dual Rated for use with Copper and/or Aluminum wires
• Insulated Splice with rugged high-dielectric Rubber/Vinyl Coating
• Pre-Filled with Oxide Inhibitor
• 4 Set Screws
• Insulated Splice provides Easy Re-entry for changes, inspection or troubleshooting
• Plugs marked with connector max wire size for easy identification
• One wire per terminal
• Temperature range of –49°F to 194°F (–45° to 90°C)
• 600 Volts
• ANSI C119.4 & cULus 486b Listed
• Rated for Use with 194°F(90°C) Cables
• Dimension Measurements = Inches
• Order Qty of 1 = 1 Piece

Morris Black Insulated In-Line Splice 500 - 6

Insulated Electrical Power Connector In-Line Splice 500-#6 - Black Insulated Splice for easy fast hassle free installations

Black Insulated Electrical Power Connector In-Line Splice features include:

• 6061-T6 Aluminum CU9AL Dual Rated for use with Copper and/or Aluminum wires
• Insulated Splice with rugged high-dielectric Rubber/Vinyl Coating
• Pre-Filled with Oxide Inhibitor
• Insulated Splice provides Easy Re-entry for changes, inspection or troubleshooting
• Plugs marked with connector max wire size for easy identification
• One wire per terminal
• Temperature range of –49°F to 194°F (–45° to 90°C)
• 600 Volts
• ANSI C119.4 & cULus 486b Listed
• Rated for Use with 194°F(90°C) Cables
• Dimension Measurements = Inches
• Order Qty of 1 = 1 Piece

Morris Weatherproof Boxes - 23.8 Cubic Inch Capacity

Weatherproof Boxes - One Gang Deep 23.8 Cubic Inch Capacity - 5 Outlet Holes 3/4" Gray - A powder coated Large Weatherproof Electrical Box - 5 Outlet.

Weatherproof Boxes - One Gang Deep 23.8 Cubic Inch Capacity - 5 Outlet Holes 3/4" Gray features include:

• Length 4-1/2” X Width 2-3/4” X Depth 2-5/8”
• Large Weatherproof Electrical Box - 5 Outlet Includes Closure Plugs
• Detachable Lugs Provided
• Ground Screw Installed
• Reinforced Connector Outlets
• Seamless Die Cast Aluminum
• Powder Coat Finish
• Individually Shrink Wrapped Packaging
• cULus Listed
• Order Qty of 1 = 1 Piece

Morris Thin Wall Heat Shrink Tubing Kit for Wires

Thin Wall Heat Shrink Tubing Kits - Heat Shrink Tubing for Electrical Insulation and Color Coding.

Sporty Safety Glasses Clear - These Tinted Safety Glasses have a more modern look.

Sporty Safety Glasses Clear features include:

• Sporty trend-setting contemporary styling that fits the contours of your face
• Deep curve provides superior impact protection on these Tinted Safety Glasses
• Lightweight Polycarbonate lenses - impact resistance & UV protection
• Ideal for protection against dust and particles
• Compliance: ANSI Z87.1
• Order Qty of 1 = 1 Piece

Knee Pads Large - Great multipurpose Abrasion Resistant Kneepads.

Knee Pads Large features include:

• Lightweight, soft, comfortable foam padding with abrasion-resistant plastic
• Tough Nylon abrasion resistant shell
• It provides protection against bump, impact, bruises, and other injuries
• Good for construction, carpentry, maintenance, electrical work, sports, etc.
• Good for anything that could cause bruises or abrasions
• Order Qty of 1 = 1 Pair

Hard Hat - This Ratchet Hard Hat provides comfort and safety.

Hard Hat features include:

• Ratchet Hard Hat has Polypropylene shell, tough, lightweight, and durable
• Four-point easy turn knob ratchet adjustment for perfect fit
• Shock-absorbing and rain trough prevents water from dripping down to neck
• Reinforced ribs on top provide extra impact protection
• Ratchet Hard Hat has Slotted sides for accessories, such as face shields or ear muffs
• Complies with ANSI Z89.1 & OSHA requirements
• (#53248)Chin strap sold separately from hard hat
• Order Qty of 1 = 1 Piece

Ear Plugs - Great protection Low Noise Ear Plugs.

Ear Plugs features include:

• 3 soft pliable flange design adjusts to ear for soothing noise suppression
• Low Noise Ear Plugs Provide superb hearing protection while allowing speech & warning signals to be heard
• A neck string, plastic case, and chain allow for convenient carrying
• Compliance: CE EN352-2, ANSI S3.19
• SNR: 25dB NRR:25dB
• Order Qty of 1 = 1 Pair

First Aid Kit - The perfect basic First Aid Kit for home or office.

First Aid Kit features include:

• 25 Person Kit
• Professionally designed with a complete assortment of top quality first aid items
• Perfect for on-site minor emergencies
• Handily packages in a sturdy, lightweight plastic case with handle
• Kit includes:
• (3) 2X2 Sponge pad (5 PK)
• (2) 3X3 Gauze pad (2 PK)
• (3) 3X4 Non-stick pad
• (1) Combine pad 5X9
• (1) First aid dressing (2 PK)
• (1) Triangular bandage
• (1) Eye pad
• (1) Elastic bandage (3" X 5 YDS)
• (2) Elastic bandage (2" X 5 YDS)
• (50) Adhesive strips (3/4X2-3/4)
• (30) Various sizes adhesive strips
• (8) Alcohol prep pads
• (4) Cleaning wipes
• (1) Cold pack
• (1) Emergency blanket
• (6) Safety pins
• (1) Strap tourniquet
• (1) Tweezers
• (1) Scissors
• (1) Glove
• Order Qty of 1 = 1 Kit

Safety Goggles - These Safety Goggles are designed to fit over any pair of Glasses.

Safety Goggles features include:

• General purpose impact resistant cover-type protective goggles
• Soft clear Polycarbonate lens, flexible Vinyl shroud
• Comfortable & Shaped to Conform to Facial Contours
• Safety Goggles Glasses have Lightweight Elastic Strap, Direct ventilation system
• Fits over most prescription glasses
• Meets or Exceeds ANSI Z87.1 Standards
• Order Qty of 1 = 1 Piece

Standard Safety Glasses Clear Lens - These Clear Safety Glasses feature Anti Glare len.

Standard Safety Glasses Clear Lens features include:

• Full panoramic clear frame/lens has wide vision field & max UV protection
• Anti-glare brow guard, universal bridge, & spatula temples with wide integral side shields for maximum coverage
• High-Impact, Scratch Resistant Polycarbonate Lens
• Lightweight & Polycarbonate Frame
• Adjustable temple that locks into place
• Meets or Exceeds ANSI Z87.1 Standards
• Order Qty of 1 = 1 Piece

Morris Single Pole Switch Commercial Grade 81990

Commercial Grade Decorative Single Pole Switch/Receptacle Rocker Switch 15A-125V - A Decorative Single Pole Switch that's attractive and durable.

Commercial Grade Decorative Single Pole Switch/Receptacle Rocker Switch Ivory 15A-125V features include:

• Commercial Grade Garbage Disposal Decorative Switch is designed to with stand rigorous commercial environments
• Decorative Single Pole Switch/Receptacle Rocker Switch has an elegant design which provides multiple controls in a single-gang wall box
• Fit standard wall boxes
• Smooth Quiet Paddle Action
• Made of GE Lexan
• Steel mounting strap Zinc-Plated for corrosion resistance
• Washer-type break-off plaster ear for best flush alignment
• Captive mounting screws
• Back and side wiring for easy installation
• Large head combination screws for quick wiring
• Easy Access Green Hex Head Ground Screw
• 15A, 125V
• Accepts #12 or #14 Stranded or Solid Copper wire(Push-In #14 Solid Only)
• UL 94V-2 Flame Rating
• Temperature Rating: -40°F to 167°F
• Wallplate Not Included
• Copper Wire Only
• UL listed
• Order Qty of 1 = 1 Piece

Morris Triple Rocker Switch Commercial Grade 81970

Commercial Grade Decorative Triple Rocker Switch 15A-120/277V - An attractive Triple Rocker Switch at a good price.

Commercial Grade Decorative Triple Rocker Switch Ivory 15A-120/277V features include:

• Commercial Grade Garbage Disposal Decorative Switch is designed to with stand rigorous commercial environments
• Triple rocker switch has an elegant design which provides multiple controls in a single-gang wall box
• Fit standard wall boxes
• Smooth Quiet Paddle Action
• Made of GE Lexan
• Steel mounting strap Zinc-Plated for corrosion resistance
• Washer-type break-off plaster ear for best flush alignment
• Captive mounting screws
• Back and side wiring for easy installation
• Large head combination screws for quick wiring
• Easy Access Green Hex Head Ground Screw
• 15A, 120/277V
• Accepts #12 or #14 Stranded or Solid Copper wire(Push-In #14 Solid Only)
• UL 94V-2 Flame Rating
• Temperature Rating: -40°F to 167°F
• Wallplate Not Included
• Copper Wire Only
• UL listed
• Order Qty of 1 = 1 Piece

Morris Decorative Switches 82070 - Morris Electric

Decorative Switches 4 Way 15A-120/277V - Our Decorative Switch wires quickly and easily.

Decorative Switches Ivory 4 Way 15A-120/277V features include:

• 4 Way Decorative Switch 15A 120/277V
• Smooth Quiet Paddle Action
• Made of GE Lexan
• Steel mounting strap Zinc-Plated for corrosion resistance
• Washer-type break-off plaster ear for best flush alignment
• Captive mounting screws
• Back and side wiring for easy installation
• Large head Tri-combination screws for quick wiring
• Easy Access Green Hex Head Ground Screw
• Accepts #12 or #14 Stranded or Solid Copper wire(Push-In #14 Solid Only)
• Copper Wire Only
• UL 94V-2 Flame Rating
• Temperature Rating:-40°F to 167°F
• Wallplate Not Included
• UL listed
• Order Qty of 1 = 1 Piece

Morris Decorative Switches 82290 3 Way - Morris Electric

Decorative Switches 3 Way Lighted 15A-120/277V - Our Decorative Switch wires quickly and easily.

Decorative Switches Ivory 3 Way Lighted 15A-120/277V features include:

• 3 Way Lighted Decorative Switch 15A 120/277V
• Smooth Quiet Paddle Action
• Made of GE Lexan
• Steel mounting strap Zinc-Plated for corrosion resistance
• Washer-type break-off plaster ear for best flush alignment
• Captive mounting screws
• Back and side wiring for easy installation
• Large head Tri-combination screws for quick wiring
• Easy Access Green Hex Head Ground Screw
• Accepts #12 or #14 Stranded or Solid Copper wire(Push-In #14 Solid Only)
• Copper Wire Only
• UL 94V-2 Flame Rating
• Temperature Rating:-40°F to 167°F
• Wallplate Not Included
• UL listed
• Order Qty of 1 = 1 Piece

Morris Decorative Switches 82060 3 Way - Morris Products

Decorative Switches 3 Way 15A-120/277V - Our Decorative Switch wires quickly and easily.

Decorative Switches Ivory 3 Way 15A-120/277V features include:

• 3 Way Decorative Switch 15A 120/277V
• Smooth Quiet Paddle Action
• Made of GE Lexan
• Steel mounting strap Zinc-Plated for corrosion resistance
• Washer-type break-off plaster ear for best flush alignment
• Captive mounting screws
• Back and side wiring for easy installation
• Large head Tri-combination screws for quick wiring
• Easy Access Green Hex Head Ground Screw
• Accepts #12 or #14 Stranded or Solid Copper wire(Push-In #14 Solid Only)
• Copper Wire Only
• UL 94V-2 Flame Rating
• Temperature Rating:-40°F to 167°F
• Wallplate Not Included
• UL listed
• Order Qty of 1 = 1 Piece

Morris Decorative Switches 82285 Single Pole Lighted

Decorative Switches Single Pole Lighted 15A-120/277V - Our Decorative Switch wires quickly and easily.

Decorative Switches Ivory Single Pole Lighted 15A-120/277V features include:

• Single Pole Lighted Decorative Switch 15A 120/277V
• Smooth Quiet Paddle Action
• Made of GE Lexan
• Steel mounting strap Zinc-Plated for corrosion resistance
• Washer-type break-off plaster ear for best flush alignment
• Captive mounting screws
• Back and side wiring for easy installation
• Large head Tri-combination screws for quick wiring
• Easy Access Green Hex Head Ground Screw
• Accepts #12 or #14 Stranded or Solid Copper wire(Push-In #14 Solid Only)
• Copper Wire Only
• UL 94V-2 Flame Rating
• Temperature Rating:-40°F to 167°F
• Wallplate Not Included
• UL listed
• Order Qty of 1 = 1 Piece

Morris Decorative Switches 82050 Single Pole - FireFold

Decorative Switches Single Pole 15A-120/277V - Our Decorative Switch wires quickly and easily.

Decorative Switches features Ivory Single Pole 15A-120/277V include:

• Single Pole Decorative Switch 15A 120/277V
• Smooth Quiet Paddle Action
• Made of GE Lexan
• Steel mounting strap Zinc-Plated for corrosion resistance
• Washer-type break-off plaster ear for best flush alignment
• Captive mounting screws
• Back and side wiring for easy installation
• Large head Tri-combination screws for quick wiring
• Easy Access Green Hex Head Ground Screw
• Accepts #12 or #14 Stranded or Solid Copper wire(Push-In #14 Solid Only)
• Copper Wire Only
• UL 94V-2 Flame Rating
• Temperature Rating:-40°F to 167°F
• Wallplate Not Included
• UL listed
• Order Qty of 1 = 1 Piece

Morris Single Pole Toggle Switch & Pilot Light 82095 

Single Pole Toggle Switch and Pilot Light 15A-120V - This Single Pole Toggle Switch comes with a pilot light.

Single Pole Toggle Switch and Pilot Light Ivory 15A-120V features include:

• Single Pole Toggle Switch and Pilot Light 15A, 120V
• Made of GE Lexan
• Steel mounting strap Zinc-Plated for corrosion resistance
• Washer-type break-off plaster ear for best flush alignment
• Captive mounting screws
• Accepts #12 or #14 Stranded or Solid Copper wire(Push-In #14 Solid only)
• Back and side wiring for easy installation
• Large head combination screws for quick wiring
• Easy Access Green Hex Head Ground Screw
• Copper wire Only
• Temperature Rating: -40°F to 167°F
• UL 94V-2 Flame Rating
• UL listed
• Order Qty of 1 = 1 Piece

Morris Commercial 3 Way Toggle Switch 82025 - FireFold

Commercial 3 Way Toggle Switch 20A-120/277V - 3-Way Ivory Toggle Switch for commercial use.

Commercial 3 Way Toggle Switch Ivory 20A-120/277V features include:

• Commercial grade is designed to with stand rigorous commercial environments
• 3-Way Toggle Switch 20A, 120/277V
• Made of GE Lexan
• Steel mounting strap Zinc-Plated for corrosion resistance
• Washer-type break-off plaster ear for best flush alignment
• Captive mounting screws
• Accepts #12 or #14 Stranded or Solid Copper wire(Push-In Solid only)
• Back and side wiring for easy installation
• Large head combination screws for quick wiring
• Easy Access Green Hex Head Ground Screw
• Copper Wire Only
• Temperature Rating: -40°F to 167°F
• UL 94V-2 Flame Rating
• UL listed
• Order Qty of 1 = 1 Piece

Morris Commercial Single Pole Toggle Switch 82020

Commercial Single Pole Toggle Switch 20A-120/277V - Single Toggle Ivory Switch for commercial use.

Commercial Single Pole Toggle Switch Ivory 20A-120/277V features include:

• Commercial grade is designed to with stand rigorous commercial environments
• Single Pole Toggle Switch 20A, 120/277V
• Steel mounting strap Zinc-Plated for corrosion resistance
• Washer-type break-off plaster ear for best flush alignment
• Captive mounting screws
• Back and side wiring for easy installation
• Accepts #12 or #14 Stranded or Solid Copper wire(Push-In #14 Solid only)
• Large head combination screws for quick wiring
• Easy Access Green Hex Head Ground Screw
• Copper Wire Only
• Temperature Rating: -40°F to 167°F
• UL 94V-2 Flame Rating
• UL listed
• Order Qty of 1 = 1 Piece

Morris Toggle Switch 3 Way 82030 - 15A-120/277V

Toggle Switch 3 Way 15A-120/277V - 3 Way Ivory 15A Toggle Switch for copper.

3 Way Ivory 15A Toggle Switch features include:

• 3 Way Toggle Switch 15A 120/277V
• Made of GE Lexan
• Accepts #12 or #14 Stranded or Solid Copper Wire - Push-In use #14 Solid Only
• Steel mounting strap, zinc-plated for corrosion resistance
• Washer-type break-off plaster ear for best flush alignment
• Captive mounting screws
• Back and side wiring for easy installation
• Large head combination screws for quick wiring
• Easy-access green hex head ground screw
• Temperature Rating: -40°F to 167°F
• Copper Wire Only
• UL 94V-2 Flame Rating
• UL listed
• Order Qty of 1 = 1 Piece

Morris Swivel Extender for Photocontrol Mount 39063

Swivel Adaptor for Photocontrol - - Extends Length of Photoeye.

Swivel Adaptor for Photocontrol features include:

• Swivel Adaptor for Photocontrol - Extends Length of Photoeye
• Adjustable to work at any angle
• Works with the following Morris#'s: 39010, 39012, 39020, 39022, 39060, 39062
• Polycarbonate
• Order Qty of 1 = 1 Piece

Morris Pencil Type Photocontrols Swivel Mount 39062

Pencil Type Photocontrols Swivel Mount 208-277V - Our Swivel Mount Photo Controls give you versatility.

Pencil Type Photocontrols Swivel Mount 208-277V features include:

• Weatherproof Polycarbonate Housing & Lens
• 1/2” CDS Light Sensor with Heat Sink
• Thermal Switch
• Thin cylindrical shape Swivel Mount Photo Control fits neatly between twin floodlights or other tight applications
• Swivel Mount Photo Controls typically mounts on fixtures or boxes
• Field adjustable swivel base makes it easy to direct the photocell away from stray light
• “O” ring sealed to prevent water from entering through the knuckle
• Light Levels: ON: .9 to 1.9 FC OFF: 2.8 To 5.6 FC
• Single Pole, Single Throw Switch
• Temperature Range: -40°F – +158°F
• Relative Humidity: 96%
• Power Consumption:1.5 Watts Max
• Life Cycle: 6500 Cycles
• Contact Position at Night is Normally Open
• Standard 1/2” I.P.S. Pipe Thread Nipple
• 6” Color Coded Leads with Wiring Diagram on Control
• UL Listed
• Order Qty of 1 = 1 Piece

Morris Photocontrols Flush Mount with Wall Plate 39042 

Photocontrols Flush Mount with Wall Plate 208-277V - Our Weatherproof Flush Mount Photocontrols puts your lighting solutions at your fingertips.

Photocontrols Flush Mount with Wall Plate 208-277V features include:

• Weatherproof Polycarbonate Housing & Lens
• Brushed Aluminum Wallplate and Gasket
• SPST - Normally Open
• 1/2" CDS Photocell
• 30-60 Second Time Delay
• Light Levels: ON: .9 to 1.9 FC OFF: 2.8 To 5.6 FC
• Thermal Switch
• Temperature Range: -40ºF to 158ºF
• Power Consumption Below 1.5 Watts Average
• Relative Humidity: 96%
• Contact position at night is normally closed
• Life Cycle: 6500 Cycles
• 3/8”-18 Thread Nipple with Rubber Gasket and Plastic Locknut
• 6” Leads Exit Rear of Housing for Tight locations
• UL Listed
• Order Qty of 1 = 1 Piece

Morris Photocontrols Flush Mount with Wall Plate 39040

Photocontrols Flush Mount with Wall Plate 120V - Our Weatherproof Flush Mount Photocontrols puts your lighting solutions at your fingertips.

Photocontrols Flush Mount with Wall Plate 120V features include:

• Weatherproof Polycarbonate Housing & Lens
• Brushed Aluminum Wallplate and Gasket
• SPST - Normally Open
• 1/2" CDS Photocell
• 30-60 Second Time Delay
• Light Levels: ON: .9 to 1.9 FC OFF: 2.8 To 5.6 FC
• Thermal Switch
• Temperature Range: -40ºF to 158ºF
• Power Consumption Below 1.5 Watts Average
• Relative Humidity: 96%
• Contact position at night is normally closed
• Life Cycle: 6500 Cycles
• 3/8”-18 Thread Nipple with Rubber Gasket and Plastic Locknut
• 6” Leads Exit Rear of Housing for Tight locations
• UL Listed
• Order Qty of 1 = 1 Piece

Morris Photocontrols Flush Mount 39032 208-277V

Photocontrols Flush Mount 208-277V - Our Weatherproof Flush Mount Photocontrols are an excellent fixture mounted lighting control.

Photocontrols Flush Mount 208-277V features include:

• Weatherproof Polycarbonate Housing & Lens
• SPST - Normally Open
• 1/2" CDS Photocell
• 30-60 Second Time Delay
• Light Levels: ON: .9 to 1.9 FC OFF: 2.8 To 5.6 FC
• Thermal Switch
• Temperature Range: -40ºF to 158ºF
• Power Consumption Below 1.5 Watts Average
• Relative Humidity: 96%
• Contact position at night is normally closed
• Life Cycle: 6500 Cycles
• 3/8”-18 Thread Nipple with Rubber Gasket and Plastic Locknut
• 6” Leads Exit Rear of Housing for Tight locations
• UL Listed
• Order Qty of 1 = 1 Piece

Morris Photocontrols Flush Mount 39030 - 120V

Photocontrols Flush Mount 120V - Our Weatherproof Flush Mount Photocontrols are an excellent fixture mounted lighting control.

Photocontrols Flush Mount 120V features include:

• Weatherproof Polycarbonate Housing & Lens
• SPST - Normally Open
• 1/2" CDS Photocell
• 30-60 Second Time Delay
• Light Levels: ON: .9 to 1.9 FC OFF: 2.8 To 5.6 FC
• Thermal Switch
• Temperature Range: -40ºF to 158ºF
• Power Consumption Below 1.5 Watts Average
• Relative Humidity: 96%
• Contact position at night is normally closed
• Life Cycle: 6500 Cycles
• 3/8”-18 Thread Nipple with Rubber Gasket and Plastic Locknut
• 6” Leads Exit Rear of Housing for Tight locations
• UL Listed
• Order Qty of 1 = 1 Piece

Morris Open Circuit Cap Photocontrols Locking Type

Locking Type Photocontrols Open Circuit Cap - Locking Photo Controls secure your light settings.

Locking Type Photocontrols Open Circuit Cap features include:

• Used for temporarily turning off a luminaire with twist lock
• UV Stabilized Polycarbonate Cover
• High Impact Polybutylene Terephthalate Base
• IP65 Protection While Installed
• UL Listed
• Order Qty of 1 = 1 Piece

Morris Shorting Cap with Surge Protection 39058

Locking Type Photocontrols Shorting Cap with Surge Protection - Locking Photo Controls secure your light settings.

Locking Type Photocontrols Shorting Cap with Surge Protection features include:

• Locking Shorting Cap typically used for testing lamp & ballast fixture where twist lock photocell is used
• Surge Protection: 460 Joules; 10,000A
• Clamping Voltage: 820V
• UV Stabilized Polycarbonate Cover
• High Impact Polybutylene Terephthalate Base
• IP65 Protection While Installed
• UL Listed
• Order Qty of 1 = 1 Piece

Morris Shorting Cap with No Surge Protection 39056

Locking Type Photocontrols Shorting Cap No Surge Protection - Locking Photo Controls secure your light settings.

Locking Type Photocontrols Shorting Cap No Surge Protection features include:

• Locking Shorting Cap typically used for testing lamp & ballast fixture where twist lock photocell is used
• UV Stabilized Polycarbonate Cover
• High Impact Polybutylene Terephthalate Base
• IP65 Protection While Installed
• UL Listed
• Order Qty of 1 = 1 Piece

Morris Locking Type Photocontrol Standard 39050 

Locking Type Photocontrol Standard 120V - Locking Photo Controls are perfect for Residential or Commercial Lighting Control.

Locking Type Photocontrol Standard 120V features include:

• Cost effective Means of Controlling Residential Lighting Systems
• 5-20 Second Time Delay
• UV Stabilized Polycarbonate Cover and Clear Window
• High Impact Polybutylene Terephthalate Base
• IP65 Protection While Installed
• 1/2” Light Sensor
• Temp Rate: -40°F to 158°F
• Relative Humidity: 96%
• Power Consumption:1.5 Watts Average
• Electrical Life: 5000 Cycles
• UL Listed
• Order Qty of 1 = 1 Piece

Locking Style Photocontrols Spec Grade 208-277V - Locking Photo Controls are perfect for Utility and Municipal Lighting Control.

Locking Style Photocontrols Spec Grade 208-277V features include:

• Cost effective Means of Controlling Utility, Commercial & Residential Lighting Systems
• 30-120 Second Time Delay
• UV Stabilized Polycarbonate Cover and Clear Window
• High Impact Polybutylene Terephthalate Base
• IP65 Protection While Installed
• 1” Light Sensor
• Temp Rate: -40°F to 158°F
• Relative Humidity: 96%
• Power Consumption:1.5 Watts Average
• Electrical Life: 6500 Cycles
• UL Listed
• Order Qty of 1 = 1 Piece

Spec Grade Photocontrols Locking Type 120V - Locking Photo Controls are perfect for Utility and Municipal Lighting Control.

Spec Grade Photocontrols Locking Type 120V features include:

• Cost effective Means of Controlling Utility, Commercial & Residential Lighting Systems
• 30-120 Second Time Delay
• UV Stabilized Polycarbonate Cover and Clear Window
• High Impact Polybutylene Terephthalate Base
• IP65 Protection While Installed
• 1” Light Sensor
• Temp Rate: -40°F to 158°F
• Relative Humidity: 96%
• Power Consumption:1.5 Watts Average
• Electrical Life: 6500 Cycles
• UL Listed
• Order Qty of 1 = 1 Piece

Locking Style Receptacles withAluminum Bracket Mount For Twist Lock Photoeye - Phenolic Locking Style Receptacles are used for Mounting Locking Style Photocells.

Locking Style Receptacles withAluminum Bracket Mount For Twist Lock Photoeye features include:

• Phenolic Socket
• Brass Contacts
• ABS Waterproof Back Cover
• 1/2” Conduit with Zinc Alloy Locknut
• Temp Rate: -40°F to 176°F
• Relative Humidity : 96%
• cULus Listed
• Order Qty of 1 = 1 Piece

Locking Style Receptacles Fixture Mount For Twist Lock Photoeye - Phenolic Locking Style Receptacles are used for Mounting Locking Style Photocells.

Locking Style Receptacles Fixture Mount For Twist Lock Photoeye features include:

• Phenolic Socket
• Brass Contacts
• ABS Waterproof Back Cover
• Temp Rate: -40°F to 176°F
• Relative Humidity : 96%
• UL Recognized
• Order Qty of 1 = 1 Piece

Shutter Style Photocontrols - Fixed Base - Spec Grade 208-277V - Our Weatherproof Photocontrols have many useful features.

Shutter Style Photocontrols - Fixed Base - Spec Grade 208-277V features include:

• Die Cast Aluminum Vandal Resistant Housing
• 1” Extra Wide Light Sensor for Increased Accuracy
• Photocontrol features a heavy-duty thermal bi-metal switch that provides a 30-60 second time delay. This virtually eliminates unwanted lamp cycling that could be caused by lightning, car headlights, etc
• Although the turn-on level is pre-set at the factory, each control is furnished with an adjustable slide shutter/bar that allows field adjustment
• Typically mount on fixtures or boxes
• Weatherproof Polycarbonate Housing
• Single Pole, Single Throw Switch
• Contact Position at Night is Normally Closed
• Temperature Range: -40°F to 158°F
• Power Consumption Below 1.5 Watts Average
• Standard 1/2” I.P.S. Pipe Threaded Nipple, Includes Gasket and Locknut
• 6" Color Coded Leads with Wiring Diagram on Control
• UL Listed
• Order Qty of 1 = 1 Piece

Shutter Style Photocontrols - Fixed Base - Spec Grade 120V - Our Weatherproof Photocontrols have many useful features.

Shutter Style Photocontrols - Fixed Base - Spec Grade 120V features include:

• Die Cast Aluminum Vandal Resistant Housing
• 1” Extra Wide Light Sensor for Increased Accuracy
• Photocontrol features a heavy-duty thermal bi-metal switch that provides a 30-60 second time delay. This virtually eliminates unwanted lamp cycling that could be caused by lightning, car headlights, etc
• Although the turn-on level is pre-set at the factory, each control is furnished with an adjustable slide shutter/bar that allows field adjustment
• Typically mount on fixtures or boxes
• Weatherproof Polycarbonate Housing
• Single Pole, Single Throw Switch
• Contact Position at Night is Normally Closed
• Temperature Range: -40°F to 158°F
• Power Consumption Below 1.5 Watts Average
• Standard 1/2” I.P.S. Pipe Threaded Nipple, Includes Gasket and Locknut
• 6" Color Coded Leads with Wiring Diagram on Control
• UL Listed
• Order Qty of 1 = 1 Piece

Shutter Style Photocontrol - Swivel Base 208-277V- Our Weatherproof Photocontrols have many useful features.

Shutter Style Photocontrol - Swivel Base 208-277V features include:

• Photocontrol features a heavy-duty thermal bi-metal switch that provides a 30-60 second time delay. This virtually eliminates unwanted lamp cycling that could be caused by lightning, car headlights, etc
• Although the turn-on level is pre-set at the factory, each control is furnished with an adjustable slide shutter/bar that allows field adjustment
• Typically mount on fixtures or boxes
• Weatherproof Polycarbonate Housing
• Single Pole, Single Throw Switch
• Contact Position at Night is Normally Closed
• Temperature Range: -40°F to 158°F
• Power Consumption Below 1.5 Watts Average
• Standard 1/2” I.P.S. Pipe Threaded Nipple, Includes Gasket and Locknut
• 6" Color Coded Leads with Wiring Diagram on Control
• UL Listed
• Order Qty of 1 = 1 Piece

Shutter Style Photocontrol - Swivel Base 120V - Our Weatherproof Photocontrols have many useful features.

Shutter Style Photocontrol - Swivel Base 120V features include:

• Photocontrol features a heavy-duty thermal bi-metal switch that provides a 30-60 second time delay. This virtually eliminates unwanted lamp cycling that could be caused by lightning, car headlights, etc
• Although the turn-on level is pre-set at the factory, each control is furnished with an adjustable slide shutter/bar that allows field adjustment
• Typically mount on fixtures or boxes
• Weatherproof Polycarbonate Housing
• Single Pole, Single Throw Switch
• Contact Position at Night is Normally Closed
• Temperature Range: -40°F to 158°F
• Power Consumption Below 1.5 Watts Average
• Standard 1/2” I.P.S. Pipe Threaded Nipple, Includes Gasket and Locknut
• 6" Color Coded Leads with Wiring Diagram on Control
• UL Listed
• Order Qty of 1 = 1 Piece

Shutter Style Photocontrol - Fixed Base 208-277V - Our Weatherproof Photocontrols have many useful features.

Shutter Style Photocontrol - Fixed Base 208-277V features include:

• Photocontrol features a heavy-duty thermal bi-metal switch that provides a 30-60 second time delay. This virtually eliminates unwanted lamp cycling that could be caused by lightning, car headlights, etc
• Although the turn-on level is pre-set at the factory, each control is furnished with an adjustable slide shutter/bar that allows field adjustment
• Typically mount on fixtures or boxes
• Weatherproof Polycarbonate Housing
• Single Pole, Single Throw Switch
• Contact Position at Night is Normally Closed
• Temperature Range: -40°F to 158°F
• Power Consumption Below 1.5 Watts Average
• Standard 1/2” I.P.S. Pipe Threaded Nipple, Includes Gasket and Locknut
• 6" Color Coded Leads with Wiring Diagram on Control
• UL Listed
• Order Qty of 1 = 1 Piece

Shutter Style Photocontrol - Fixed Base 120V - Our Weatherproof Photocontrols have many useful features.

Shutter Style Photocontrol - Fixed Base 120V features include:

• Photocontrol features a heavy-duty thermal bi-metal switch that provides a 30-60 second time delay. This virtually eliminates unwanted lamp cycling that could be caused by lightning, car headlights, etc
• Although the turn-on level is pre-set at the factory, each control is furnished with an adjustable slide shutter/bar that allows field adjustment
• Typically mount on fixtures or boxes
• Weatherproof Polycarbonate Housing
• Single Pole, Single Throw Switch
• Contact Position at Night is Normally Closed
• Temperature Range: -40°F to 158°F
• Power Consumption Below 1.5 Watts Average
• Standard 1/2” I.P.S. Pipe Threaded Nipple, Includes Gasket and Locknut
• 6" Color Coded Leads with Wiring Diagram on Control
• UL Listed
• Order Qty of 1 = 1 Piece

Direct Burial Splice Covers #14 - 350 MCM

Direct Burial Splice Covers #14 - 350 MCM features include:

li>Our Direct Burial Splice Covers Can Be Used with a variety Connectors for Direct Burial, Underground Vault and Overhead Service Splices
• Rubber Cover Only - Connector Not Included
• No Taping, Heat Shrink or Mastic Required
• Approved for Aluminum or Copper Conductors or Connectors
• 600 Volt max
• REA Approved
• Order Qty of 1 = 1 Piece

Direct Burial Splice Covers #14 - 2/0

Direct Burial Splice Covers #14 - 2/0 features include:

li>Our Direct Burial Splice Covers Can Be Used with a variety Connectors for Direct Burial, Underground Vault and Overhead Service Splices
• Rubber Cover Only - Connector Not Included
• No Taping, Heat Shrink or Mastic Required
• Approved for Aluminum or Copper Conductors or Connectors
• 600 Volt max
• REA Approved
• Order Qty of 1 = 1 Piece

Direct Burial Mechanical Splice Kits - Rubber Cover 4 Screw - 600 Volt Max Splice Kit for aluminum or copper.

Direct Burial Mechanical Splice Kits - Rubber Cover 4 Screw features include:

• Our Direct Burial Mechanical Splice Kits - Rubber Cover 600 volt max Eliminates expensive crimping tools when splicing Aluminum or Copper conductors for Direct Burial
• Direct Burial and Submersible Rated - Ensures a Water Tight Splice Repair
• Prevents oxidation and keeps out moisture
• Perfect for repairing any 2, 3, or 4 wire installation
• No Taping, Heat Shrink or Mastic Required
• Kit comes complete with one mechanical connector and Rubber Cover
• AL9CU Dual rated For Use with Both Aluminum or Copper Conductors
• Popular splicing applications would be for repair and/or extending type USE cable and other electrical cables
• Splice kit contains UL Listed Components
• 600 Volt maximum 221°F (105°C) rating
• ANSI C119.4 Compliant RUS Approved
• Order Qty of 1 = 1 Kit

Direct Burial Mechanical Splice Kits - Rubber Cover 2 Screw - 600 Volt Max Splice Kit for aluminum or copper.

Direct Burial Mechanical Splice Kits - Rubber Cover 2 Screw features include:

• Our Direct Burial Mechanical Splice Kits - Rubber Cover 600 volt max Eliminates expensive crimping tools when splicing Aluminum or Copper conductors for Direct Burial
• Direct Burial and Submersible Rated - Ensures a Water Tight Splice Repair
• Prevents oxidation and keeps out moisture
• Perfect for repairing any 2, 3, or 4 wire installation
• No Taping, Heat Shrink or Mastic Required
• Kit comes complete with one mechanical connector and Rubber Cover
• AL9CU Dual rated For Use with Both Aluminum or Copper Conductors
• Popular splicing applications would be for repair and/or extending type USE cable and other electrical cables
• Splice kit contains UL Listed Components
• 600 Volt maximum 221°F (105°C) rating
• ANSI C119.4 Compliant RUS Approved
• Order Qty of 1 = 1 Kit