All

When you need a low-cost solution to mount your patch panels, switches, and other shallow equipment on the wall, then our Fixed Design Wall Mount Racks are perfect. The 12" depth is low profile, perfect for wiring closets or server rooms. The self-squaring design is one of the strongest on the market and the universal rails make mounting equipment fast and easy.

Kendall Howard 1915-1-400-00 CPU Bracket

Kendall Howard is one of the top companies out in the rack mount market. Their merchandise ranges to various products besides rack mounts alone, though, and are always high-quality products at a great price. These items, in general, are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

You’re in an office, and you’re tired of your computer being on the floor or want to get it setup on the side of your desk. Well, we have a solution for that! Kendall Howard's Desktop/Tower Wall Mount CPU Brackets are designed to get the computer off the floor and the desktop. The brackets make it easy to secure and mount any small-form-factor PC to the wall or side of the desk. The velcro strap secures the PC to the bracket.

Everyone needs a CPU bracket to protect their PC, but not everyone is smart enough to bother. Be smart and take action!

Computers located on the floor are in continual danger of being jostled and kicked, not to mention the difficulty in accessing the drives, ports, and card readers. Desktop computers and PC’s that sit on a desk take up valuable workspace look cluttered and unorganized and run the risk of being damaged by a soda or coffee spill. Kendall Howard's Desktop/Tower Wall Mount CPU Brackets protects the PC and creates a more functional, organized workspace.

That’s about it! You have a great, sturdy product just waiting to be bought. So, stop putting it off! Go ahead and get one of these today and get the job done. Need more than one? No problem! Our prices are so great that you’ll still be saving money. Buy from the USA today and rest assured that this product will last a long time.

Wavenet Double Section Swing Out Wall Mount Cabinet

Wavenet CBTF Series Double Section Swing Uut Wall Mount Cabinets are suitable for intermediate distribution frame (IDF) locations such as server room audio/video/security applications, wiring closets, manufacturing areas, warehouses, or anywhere where remote networking equipment needs to be protected and stored.

Kendall Howard Wall Mount Small Form Factor CPU Bracket

Kendall Howard is one of the top companies out in the rack mount market. Their merchandise ranges to various products besides rack mounts alone, though, and are always high quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

You’re in an office and you’re tired of your small form-factor computer being on the floor or want to get it setup on the side of your desk. Well, we have a solution for that! Kendall Howard's Small-Form-Factor Wall Mount CPU Brackets are designed to get the computer off the floor and the desktop. The brackets make it easy to secure and mount any small-form-factor PC to the wall or side of the desk. The velcro strap secures the PC to the bracket.

Everyone needs a CPU bracket to protect their PC, but not everyone is smart enough to bother. Be smart and take action!

Computers located on the floor are in continual danger of being jostled and kicked, not to mention the difficulty in accessing the drives, ports, and card readers. Desktop computers and PC’s that sit on a desk take up valuable workspace, look cluttered and unorganized, and run the risk of being damaged by a soda or coffee spill. The Kendall Howard Small-Form-Factor Wall Mount Bracket protects the PC and creates a more functional, organized workspace.

You have a great, sturdy product just waiting to be bought. So, stop putting it off! Go ahead and get one of these today and get the job done. Need more than one? No problem! Our prices are so great that you’ll still be saving money. Buy from the USA today and rest assured that this product will last a long time.

Nitrotel Single Section Wall Mount Cabinet (6-16U)

Nitrotel Single Section Wall Mount Cabinet 600 X 600 Tempered Glass Front Door Frame, Removable Side Panels, Includes 1 UL Approved Fan with plug, Finished with Electrostatic Paint, Color Black RAL 9005. Assembled. Honeycomb carton package

Nitrotel SOHO Slimline 5U (3U Vertical + 2U horizontal)

Soho Slim Line 19" wall mounting enclosure provide aesteticand decorative view together Soho Slim Line wall cabinets designed to have a variety of mounting solutions for small networking equipment in the areas like hostels, hotels, hospitals, malls, cinemas, petrol stations, offices where space distribution of the network typical network equipment is at a premium. It can accommodate switches, patch panels, PDU etc. and ideal choice for any small voice/data, DSL telephony, Internet or video conferencing installation, with the additional benefit of its compatibility with Wireless technology.

Wall Mount Swing Out Enclosure

This new Wall Mount Swing Out Enclosure combines structural integrity, cooling, and cable management. It allows the user the ability to add a wide variety of shelving accessories and products with ease. This Wall Mount Swing Out Enclosure is ideal for a variety of rack mounted servers and storage products, in addition to, audio/video equipment.

Quest 5ft 30U Home Theater Enclosure w/ Shelves

These Quest enclosures provide home theater customers a "ready-to-install" solution. They are shipped fully assembled with built-in shelving, cable managers, and equipment support rails for securing devices.

Shelves are mounted to front cage nut rails which can be used for adding additional components.

The front and rear are open for easy access to the components and they come complete with steel push pull handles on the front of the enclosure for rolling the enclosure in and out of position.

Finished with an Electrostatic Microfinish paint, these metal enclosures give any installation site a truly professional appearance.

Tripp-Lite SRW6U SmartRack Wall-Mount Enclosure Cabinet

Tripp Lite 6U Low-Profile Wall-Mount Rack Enclosure Cabinet, Removable Side Panels, 15H x 24W x 18D

The SRW6U 6U Wall Mount Rack Enclosure Cabinet is designed to integrate wall-mounting, easy equipment access, and cable management in IT network applications with limited floor space. Ventilated front door and side panels allow generous airflow to keep equipment operating safely. Adjustable rack rails with square mounting holes accommodate up to 6U of standard 19" rackmount equipment. Supports up to 140 lbs of equipment. A sturdy wall-mount bracket allows the cabinet to quickly be hung on the wall.

Quest 3ft 16U Home Theater Enclosure w/ Shelves

These Quest enclosures provide home theater customers a "ready-to-install" solution. They are shipped fully assembled with built-in shelving, cable managers, and equipment support rails for securing devices.

Shelves are mounted to front cage nut rails which can be used for adding additional components.

The front and rear are open for easy access to the components and they come complete with steel push pull handles on the front of the enclosure for rolling the enclosure in and out of position.

Finished with an Electrostatic Microfinish paint, these metal enclosures give any installation site a truly professional appearance.

Nitrotel Double Section Wall Mount Cabinet 

Nitrotel Double Section Wall mount Cabinet 600 X 600. Constructed with heavy duty steel and finished with electrostatic black paint. Supports up to 95kg capacity, assembled.

Vericom® AV Cabinets are designed for flexibility and security, making them a great choice for a multitude of audio and video applications. Fully assembled and ready to perform out-of-the-box, they are equipped with pre-installed shelving, blank panels, and tapped 10-32 mounting rails.

Available in four sizes (15, 27 and 36U), Vericom AV Cabinets are designed with a host of features, including casters and adjustable leveling feet that are provided for maximum mobility and sturdy placement.

Benefits:

Equipment Protection

• Welded frame of heavy gauge cold-rolled steel
• Locking front door & rear access panel limit unwanted access to equipment
• Shelf straps and backstops secure equipment to shelves

Flexibility

• Available in four standard sizes that can handle most any audio /video equipment configurations
• Includes both casters & adjustable leveling feet for both fixed & mobile installations
• Front door, side & rear panels are all removable for convenient access to equipment
• Vented top & bottom panels provide free air cooling, and are compatible with an optional fan unit when additional cooling is needed

Complete Solution

• Fully assembled with shelves & blanking panels pre-installed
  Easy to order - everything you need in one item number, no need for a complicated configuration tool

Kendall Howard Wall Mount Cabinet

Kendall Howard

Kendall Howard is one of the top companies out in the rack mount market. They provide high quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

The Kendall Howard Phantom Class 12U Corner Wall Mount Cabinet is truly unlike any other rack on the market. The first and only EIA compliant wall mounted equipment rack that can mount in the corner of the room. This product is so unique that it falls under the protection of several pending patents. Imagine the ability to mount equipment in schoolrooms, offices, or utility rooms without taking up valuable wall space. Saving space means saving time and money.

Details

There are some great features with this wall mount, besides that you can mount it up in a corner for saving space. You have several different viewing angles for monitoring, a reversible lift-off door, removable side panels, open back, and so much more that allow you to be able to easily get access to your equipment still once you get this mounted.

This wall mount weighs 78 pounds, but is designed to be able to be installed by a single person if needed. Once installed, this wall rack mount can handle up to a 650 pound load. This is the same, roughly, as three adult kangaroos piling into it. I don’t think you’ll ever truly need to use all of that capacity, but it paints a funny picture!

The black powdered finish and smoked acrylic front door window give this wall rack mount a sleek appearance - no matter the setting. You’ll be able to make the most of this great piece of equipment no matter what your layout is!

Kendall Howard 4U Pivot Frame Wall Mount Rack

The 4U Pivot Frame Wall Mount Rack makes network equipment installation and maintenance easy for installers. Its pivot feature allows the rackmount frame to swing down and stop at 90 degrees, giving installers full access to the rear of equipment. Even when in the open/down position, the rack can withstand the force of punching down multiple connections - a feature especially helpful when installing patch panels. The Pivot Frame Wall Mount Rack is built with a 12" depth making it suitable for network and telecom devices such as patch panels, network switches, routers, and more. Its modular design allows you to mount multiple racks above and/or below each other creating a larger rack solution. Ample cable routing is available with the open frame design, as well as the laser knockouts on either side of the rack. Gain full access to all sides of your equipment with the Pivot Frame Wall Mount Rack.

• 10-32 tapped rails
• 12" depth
• 90 degree swing down

Kendall Howard Compact SOHO Server Rack Cabinet

Kendall Howard is one of the top companies out in the rack mount market. They provide high-quality products at a great price. These items, in general, are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

The 8U Compact Series SOHO Cabinet is a sleek and robust server rack specially designed for the small business, home office, or IT professional who wants better than just “good enough.” It's sleek, black powdered finish will allow it to work well in nearly any office environment and can work with a variety of spacing issues with ease. Plus, with a pair of doors, it’ll keep your contained devices secure and away from immediate attention.

The small profile cabinet quickly rolls under a work surface, tucks away in a closet, or squeezes into the places full-size racks can’t. Need a desktop solution? Just remove the casters and it can be set on any flat surface. Sounds pretty fantastic, doesn't it? Well, that's because it is! There are few products that even come close to the quality and flexibility that this cabinet brings to the table.

Details

Besides all the flexibility I described above, you’re getting a sturdy and reliable product. This cabinet is manufactured from cold-rolled steel, allowing it to have a max weight capacity of four hundred pounds. It does weigh seventy-nine pounds by itself, so it is not something that you’ll want to have to move around often. This is why the casters are provided and recommended to be used - for your convenience and ease of use.

The device also comes with a 78 cm fan, allowing you to add some extra airflow where some might be lacking. This is great if you have to put the cabinet under a desk, but still want to ensure proper airflow to the contained devices.

The last thing to say is that it comes with a limited lifetime warranty. With a great price and that sort of quality, you really cannot get a better deal anywhere else.

Quest Floor Enclosure w/ Vented Mesh Door, 23"W x 23"D - 45U

Quest 700 Series Floor Enclosures have a 23″ width by a 23″ depth, featuring a reversible vented steel mesh front door and rear vented split doors for access and ventilation. Ideal for 19” wide mounting on front and rear rails. They come complete with casters, floor levelers, a grounding bus, as well as two 80 CFM boxer fans for ventilation and air flow. These cabinets are constructed of heavy-duty steel, coming in a black powdercoat microfinish. Available assembled or non-assembled in knockdown boxes.

19" Wall Mount Open Frame Network Rack, Rear-hinged Swing Frame

Assembled, 4-Post, 23.8 in., Black RAL 9004

Hinged open frame enclosure wall rack for network and server equipment

The 6U 19" Wall Mount 4-Post Open Frame Network Rack from Intellinet Network Solutions is a simple, cost-effective way for housing IT equipment in secure environments that don't require a lockable rack solution. It's a great fit in places where small rack solutions are often dispersed throughout an organization, like at a remote location or branch office. Its relatively compact design lets you place it out of the way on a desk or mount it on a wall instead of taking up floor space.

Space-saving

The wall-mountable swing frame is perfect for saving valuable floor space while organizing network and server equipment from telecom, surveillance and audio/video applications where space is at a premium and a full-size floor-standing rack or cabinet cannot be used. The 540 mm (21.26 in.) usable depth of the rack allows for the mounting of shelves, switches, patch panels and more.

Easy access

The open frame design ensures maximum airflow to your equipment for smoother operation and a longer lifespan. It also allows your cabling to enter through all sides. Hinges on the rear frame let the entire enclosure swing open for easy component exchange and maintenance. Two latches keep the frame closed. This construction makes it a smart choice as a test center rack for server and networking equipment.

High-quality steel

The strong and durable housing, constructed of high-quality SPCC cold-rolled steel with antistatic powder coating, carries a load capacity up to 40 kg (88 lbs.). Its fully assembled shipping condition saves you the trouble of putting it together. The enclosure also saves you the expense of 20 rack screws and cage nuts to securely mount your equipment because it ships with them included.

19" Wall Mount Open Frame Network Rack, Rear-hinged Swing Frame

Assembled, 4-Post, 23.8 in., Black RAL 9004

Hinged open frame enclosure wall rack for network and server equipment

The 6U 19" Wall Mount 4-Post Open Frame Network Rack from Intellinet Network Solutions is a simple, cost-effective way for housing IT equipment in secure environments that don't require a lockable rack solution. It's a great fit in places where small rack solutions are often dispersed throughout an organization, like at a remote location or branch office. Its relatively compact design lets you place it out of the way on a desk or mount it on a wall instead of taking up floor space.

Space-saving

The wall-mountable swing frame is perfect for saving valuable floor space while organizing network and server equipment from telecom, surveillance and audio/video applications where space is at a premium and a full-size floor-standing rack or cabinet cannot be used. The 540 mm (21.26 in.) usable depth of the rack allows for the mounting of shelves, switches, patch panels and more.

Easy access

The open frame design ensures maximum airflow to your equipment for smoother operation and a longer lifespan. It also allows your cabling to enter through all sides. Hinges on the rear frame let the entire enclosure swing open for easy component exchange and maintenance. Two latches keep the frame closed. This construction makes it a smart choice as a test center rack for server and networking equipment.

High-quality steel

The strong and durable housing, constructed of high-quality SPCC cold-rolled steel with antistatic powder coating, carries a load capacity up to 40 kg (88 lbs.). Its fully assembled shipping condition saves you the trouble of putting it together. The enclosure also saves you the expense of 20 rack screws and cage nuts to securely mount your equipment because it ships with them included.

Quest Wall Enclosure, Front/Rear Access - 300 Series

Quest’s best selling enclosures are the 300 Series Swing-out Wall Mount Enclosures. They provide equipment access through the smoked acrylic reversible front door, as well as through the lockable rear swing-out. They include one preinstalled 80 CFM fan for ventilation, and come complete with both front and rear cage nut rails. Available in five sizes with a black powdercoat microfinish.

Quest Deep Wall Enclosure, Front/Side Access - 200 Series 

The 200 Series Extended Depth Wall Mount Enclosures provide usable working depth of up to 24". These enclosures allow equipment access through the smoked acrylic reversible front door, as well as through the removable vented side panels. They include one preinstalled 80 CFM fan for ventilation, and come complete with both front and rear cage nut rails. Available in four sizes with a black powdercoat microfinish.

Vericom SOHO/Remote Office Floor Cabinet (8-24U)

Vericom® SOHO / Remote Office Cabinets are specifically designed for small offices and remote locations where space is a premium. Fully assembled and ready to deploy, they include all the features of a full-size server cabinet, conveniently sized to fit under or on top of a desk or counter.

With a maximum rail depth of 29.5”, these cabinets are capable of storing servers, networking switches, and a variety of other security and AV equipment, while high-flow vented doors provide passive cooling to keep equipment from overheating.

Benefits:

Security & Protection

• Locking door and side panels prevent unauthorized access to equipment
• Two sets of rails provide a stable mounting structure
• Doors and side panels are grounded to the cabinet frame

Flexibility

• Includes both casters and adjustable leveling feet for both fixed and mobile installations
• Multiple cable entry slots provide greater flexibility during installation
• Mounting rails are adjustable in 3/4" depth increments to match a variety of equipment sizes
• Front door, rear door and side panels are all removable for convenient access to equipment

High Capacity

• Available in three sizes to fit in a variety of environments where space is limited
• Deeper than a wall cabinet - 29.5" maximum rail depth can handle servers and other large equipment
• Robust design can support 1,500 lbs of equipment

Kendall Howard Compact SOHO Server Rack Cabinet

Kendall Howard is one of the top companies out in the rack mount market. They provide high quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

The 12U Compact Series SOHO Cabinet is a sleek and robust server rack specially designed for the small business, home office, or IT professional who wants better than just “good enough.” Its sleek, black powdered finish will allow it to work well in nearly any office environment and can work with a variety of spacing issues with ease. Plus, with a pair of doors, it’ll keep your contained devices secure and away from immediate attention.

The small profile cabinet easily rolls under a work surface, tucks away in a closet, or squeezes into the places full-size racks can’t. Need a desktop solution? Simply remove the casters and it can be set on any flat surface. Sounds pretty fantastic, doesn't it? Well, that's because it is! There are few products that even come close to the quality and flexibility that this cabinet brings to the table.

Details

Besides all the flexibility I described above, you’re getting a sturdy and reliable product. This cabinet is manufactured from cold-rolled steel, allowing it to have a max weight capacity of four hundred pounds. It does weigh ninety-two pounds by itself, so it is not something that you’ll want to have to move around often. This is why the casters are provided and recommended to be used - for your own convenience and ease of use.

The device comes also with a 78 cm fan, allowing you to add some extra airflow where some might be lacking. This is great if you have to put the cabinet under a desk, but still want to ensure proper airflow to the contained devices.

Last thing to say, really, is that it comes with a limited lifetime warranty. WIth a great price and that sort of quality, you really cannot get a better deal anywhere else. 

Kendall Howard 8U Pivot Frame Wall Mount Rack

The 8U Pivot Frame Wall Mount Rack makes network equipment installation and maintenance easy for installers. Its pivot feature allows the rackmount frame to swing down and stop at 90 degrees, giving installers full access to the rear of equipment. Even when in the open/down position, the rack can withstand the force of punching down multiple connections - a feature especially helpful when installing patch panels. The Pivot Frame Wall Mount Rack is built with a 12" depth making it suitable for network and telecom devices such as patch panels, network switches, routers, and more. Its modular design allows you to mount multiple racks above and/or below each other creating a larger rack solution. Ample cable routing is available with the open frame design, as well as the laser knockouts on either side of the rack. Gain full access to all sides of your equipment with the Pivot Frame Wall Mount Rack. Be sure to also check out the Pivot Frame Wall Mount Rack Cover and Pivot Frame Stationary Rackmount Brackets.

• Compatible with the 4U and 8U Pivot Frame Wall Mount Rack
• 10-32 tapped rails (10-32 rack screws sold separately)
• Includes 12 10-32 rack screws
• Optional Pivot Frame Wall Mount Rack Cover available (Sold separately)
• Optional Pivot Frame Stationary Rackmount Brackets available (Sold separately)
• 12" depth
• 19" EIA compliant
• 90 degree swing down
• 75 lb. weight capacity
• Made in the USA
• Limited Lifetime Warranty

The Middle Atlantic RCS series is a collection of residential enclosures that are pre-assembled at the factory and ship with pre-installed accessories, saving time and packaging waste.

The Middle Atlantic RCS-1824 is an 18 rack unit cabinet with three 2U 16" Deep Shelves, three 2U blank panels, and two top mounted cooling fans for thermal management.

19" Double Section Wallmount Cabinet

Double Section, Assembled, Black

Intellinet Network Solutions Double-Section wallmount cabinets offer you a flexible solution for your network installations. The tempered-glass door, easily removable side panels and cold-rolled galvanized steel are just some of the top quality workmanship and materials that are standard. These cabinets ship completely assembled for a quick and easy installation.

Kendall Howard Enclosed V-Rack Cabinet

The Kendall Howard Enclosed V-Rack Cabinets are the perfect solution for tight spaces, network closets, and small network rooms. The open-back design can fit over most pre-terminated network equipment and is offered in two sizes (3U & 6U). Keep your equipment protected in a Kendall Howard Enclosed V-Rack Cabinet

• 150 lbs. weight capacity
• Adjustable vertical and horizontal mounting rails and vertical sliding rails
• 6" maximum usable depth
• Locking front door
• Hanging bracket for ease of installation
• Solid sides
• Welded frame construction
• Made in the USA
• Limited Lifetime Warranty

Kendall Howard (8U) Security Wall Mount Cabinet

The Kendall Howard 8U Security Wall Mount Cabinet is a secure, professional looking solution for housing your network, electrical, and peripheral equipment. Many times small offices or remote locations require expensive data and network equipment to be installed in an open environment. This can many times lead to problems with employees, customers or others tampering with or destroying devices. With this wall mount enclosure you can securely mount all of your equipment and eliminate the risk of unauthorized use.

• 250 lb. weight capacity
• Tool-less adjustable Cage Nut style rails
• 20" usable depth
• 19" EIA compliant
• Made in the USA

Vericom High Density Wall Mount Cabinet (12-25U)

Vericom High Density Swing Out Wall Mount Cabinets are built for heavy-duty, large-scale applications. A perfect choice for networking projects requiring larger load capacities, the Vericom High Density Swing Out Wall Mount Cabinet is a fully welded frame of 14 gauge cold rolled steel that supports up to 250 pounds of networking equipment.

This High Density Swing Out Wall Cabinet is available in four sizes and features a 90-degree swing-out hinge for easy access to cables and connections, heavy duty hinges and latches and six knock-outs in the top and bottom of the rear section for cable management flexibility.

Benefits:

Security & Protection

• Locking doors and side panels prevent unauthorized access to equipment
• 12 gauge rails provide a stable mounting structure
• Doors are grounded to the cabinet frame
• Conforms to UL Standard 2416 for Audio/Video, Information and Communication Technology Equipment Cabinet, Enclosure and Rack Systems

Flexibility

• Multiple cable entry options provide greater flexibility during installation
• Doors and side panels are removable for convenient access to equipment
• Second pair of rails can be added for high density applications

Multi-Use

• Available in four sizes (12, 15, 18 and 25U) to fit in a variety of environments where space is limited
• Adaptable for use in network, security and audio/visual installations

SmartRack 12U Low-Profile Switch-Depth Wall-Mount Small Rack Enclosure, Hinged Back

The SRW12US SmartRack® 12U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 200 pounds (90.7 kilograms).

The cabinet swings away from the wall on a sturdy hinge, allowing easy back-door access to equipment and cabling during installation and maintenance. The doors and side panels lock securely to help prevent damage, tampering or theft. The front, top, bottom and removable side panels are vented, which allows air to flow freely and keep equipment cool. The reversible doors can open left or right by rotating the cabinet 180 degrees before mounting. Convenient top and bottom ports allow easy cable routing.

The SRW12US comes fully assembled and ready to mount to the wall, or use the optional SRCASTER rolling caster kit (sold separately) to make it a mobile rack. Square and 12-24 threaded mounting holes and numbered rack spaces make equipment installation easy. The vertical mounting rails adjust in 7/8-inch increments to accommodate equipment up to 20.5 inches deep, such as network switches and patch panels.

• Maximum load capacity of 200 lbs (90.7 kgs)
  
• Swings away from wall on hinge for easy back-door access
  
• Locking steel cabinet vented at sides, front, top and bottom
  
• Flow-through ventilation keeps equipment cool
  
• Secures 12U of 19 in. rack equipment up to 20.5 in. deep

Kendall Howard 12U Wall Mount Rack

Kendall Howard is one of the top companies out in the rack mount market. Their merchandise ranges to various products besides rack mounts alone, though, and are always high-quality products at a great price. These items, in general, are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

Looking for an easy way to access your equipment, but get it still mounted up for security and clutter-reduction reasons? No problem! FireFold has you covered. The 12U Side Load wall mount Rack allows easy, full access to the front and back of the equipment. This design allows easy access to all connections from either the left or right side.

There are some great features of this rack mount. First, it is low profile - allowing it to be a true space saver. The twenty-inch mounting depth and open design make it easy to maintain the equipment within it. Plus, it can handle up to 350 pounds with no issues. That’s a couple of fully grown kangaroos! Though, I doubt you’d be putting kangaroos on this thing. However! This paints a picture of the durability that this product provides. Plus, it only weighs thirty-six pounds itself. So, that’s quite an impressive feat!

The rack mount is made in the USA and comes with a limited lifetime warranty from Kendall Howard - so you know you are getting a great product. That’s about it! You have a great, sturdy product just waiting to be bought. So, stop putting it off! Go ahead and get one of these today and get the job done. Need more than one? No problem! Our prices are so great that you’ll still be saving money. Buy from the USA today and rest assured that this product will last a long time.

This rack mount server cabinet by Quest Manufacturing comes fully assembled with front door, rear and side panels, leveling feet, casters, grounding bus bar, 2 pre-installed 80 CFM fans, and equipment screws.

The 19" x 32" acrylic framed reversible door provides extra ventilation for your servers and equipment. In addition, all panels are vented to increase air circulation.

The platform and top panel feature cable cutouts for easy access. The top panel also has fan cutouts for additional ventilation.

Four fully adjustable cage nut rails allow accommodate varying equipment sizes. Accepts #12-24 Mounting Screws in EIA universal spacing.

The Middle Atlantic RCS series is a collection of residential enclosures that are pre-assembled at the factory and ship with pre-installed accessories, saving time and packaging waste.

The Middle Atlantic RCS-2724 is a 27 rack unit cabinet with four 2U 16" Deep Shelves, five 2U blank panels, one 2U 18" deep shelf, and two top mounted cooling fans for thermal management.

The Rack for High Seismic Activity

The Middle Atlantic R2 Series is specifically designed for areas where seismic activity is a concern. The R2 is fully welded for durability, protection against earthquakes and is seismic certified to the UBC 1997 and 2001 CBC Seismic Zone 4 and the IBC 2000, IBC 2003, 2002 ASCE Standard 7 and 2003 NFPA 5000 Seismic Use Group III for protecting 850 lbs of essential equipment in upper floor installations with an Ip value of 1.5.

Wall Mount Rack, Side Load - 8U

The Kendall Howard Side Load 8U Wall Mount Rack is an open frame rack with a twist...literally. The rack mounts sideways, allowing you to install equipment from side to side. This innovative concept not only allows you to install deeper equipment than most other wall mount racks, but you also have clear and easy access to the front and rear of the devices. With a weight capacity of up to 350 lbs., this side-loading wall rack is a great solution for servers, battery backups, and other heavy rackmount components.

• 20" fixed mounting depth
• 350 lb. weight capacity
• 19" EIA compliant
• Made in the USA
• Limited Lifetime Warranty

19" Double Section Wallmount Cabinet

Double Section, Assembled, Black

Intellinet Network Solutions Double-Section wallmount cabinets offer you a flexible solution for your network installations. The tempered-glass door, easily removable side panels and cold-rolled galvanized steel are just some of the top quality workmanship and materials that are standard. These cabinets ship completely assembled for a quick and easy installation.

Intellinet 19" Wall Mount Open Frame Network Rack

Assembled, 4-Post, 23.8 in., Black RAL 9004

Hinged open frame enclosure wall rack for network and server equipment

The 6U 19" Wall Mount 4-Post Open Frame Network Rack from Intellinet Network Solutions is a simple, cost-effective way for housing IT equipment in secure environments that don't require a lockable rack solution. It's a great fit in places where small rack solutions are often dispersed throughout an organization, like at a remote location or branch office. Its relatively compact design lets you place it out of the way on a desk or mount it on a wall instead of taking up floor space.

Space-saving

The wall-mountable swing frame is perfect for saving valuable floor space while organizing network and server equipment from telecom, surveillance and audio/video applications where space is at a premium and a full-size floor-standing rack or cabinet cannot be used. The 540 mm (21.26 in.) usable depth of the rack allows for the mounting of shelves, switches, patch panels and more.

Easy access

The open frame design ensures maximum airflow to your equipment for smoother operation and a longer lifespan. It also allows your cabling to enter through all sides. Hinges on the rear frame let the entire enclosure swing open for easy component exchange and maintenance. Two latches keep the frame closed. This construction makes it a smart choice as a test center rack for server and networking equipment.

High-quality steel

The strong and durable housing, constructed of high-quality SPCC cold-rolled steel with antistatic powder coating, carries a load capacity up to 40 kg (88 lbs.). Its fully assembled shipping condition saves you the trouble of putting it together. The enclosure also saves you the expense of 20 rack screws and cage nuts to securely mount your equipment because it ships with them included.

Wavenet Standing Network Server Cabinet

Wavenet CBTF Series Standing Network Server Cabinets are suitable for intermediate distribution frame (IDF) and Main Distribution Frame (MDF) locations such as telecommunications rooms specifically designed for data/audio/video/security applications, wiring closets. manufacturing areas, warehouses, or anywhere where small-to-large networing equipment needs to be protected and stored.

Vertical Cable Wall Mount Enclosure

Wall Mount Server Cabinet with 26 RMS Plexiglass Door

ICC’s wall mount enclosure cabinets with plexiglass doors are ideal for both secure and non-secure installations and are available in 26 rack mount spaces (RMS). The front door features a plexiglass window that lets you monitor equipment without opening or unlocking the enclosure. Each enclosure includes top and bottom knockouts for cable entry and exit, with vented top and bottom side panels for maximum air circulations. These wall mount enclosure cabinets come with adjustable internal vertical mounting rails for depth management. For added security, the door is lockable and can be installed to be removable and reversible with dual hinge swing units that provide quick access to the rear of the equipment. Both enclosures come fully assembled for quick installation.

NOTE:
Due to the weight and size of the cabinet, it is recommended that the installation is done with two people.

Quest 300 Series Wall Enclosure with Front/Rear Access 

The 300 Series Extended Depth Wall Mount Enclosures provide usable working depth of up to 24". These enclosures allow equipment access through the smoked acrylic reversible front door, as well as through the lockable rear swing-out. They include one preinstalled 80 CFM fan for ventilation, and come complete with both front and rear cage nut rails. Available in five sizes with a black powdercoat microfinish.

Quest Wall Enclosure, Front/Side Access  200 Series 

Quest 200 Series Wall Mount Enclosures provide equipment access through the smoked acrylic reversible front door, as well as through the removable vented side panels. Each includes one preinstalled 80 CFM fan for ventilation, front and rear cage nut rails, and are offered in black powdercoat microfinish.

Quest Floor Enclosure Server Cabinet, Acrylic Door

Quest 430 Series Floor Enclosures have a 27.5" width by a 36" depth, featuring a reversible smoked acrylic front door, and dual gate vented rear doors. The rack has a spacious interior from the outer panels, making it ideal for 19” wide mounting on front and rear adjustable rails. They come complete with casters, floor levelers, a grounding bus, as well as two 80 CFM boxer fans for ventilation and air flow. These cabinets are constructed of heavy-duty steel, coming in a black powdercoat microfinish. Shipping available assembled or unassembled in knockdown boxes.

42U SmartRack Premium Enclosure (includes doors and side panels)

42U SmartRack Enclosure ships mounted on a special pallet that features additional reinforcement and shock-absorbing material. The pallet's protective cushion safeguards the enclosure and the precision components it contains during re-shipping. Reinforced pallets and reusable packaging provide the flexibility to fully configure rack enclosures in a centralized location and safely re-ship them to remote sites, saving significant service costs. They also allow the freedom to custom-configure enclosures with network and server hardware along with UPS systems, PDUs, KVM switches and a variety of other devices prior to final installation.

SmartRack enclosures are designed for secure, high density server and networking applications in IT environments. Designed with provisions to integrate cooling, power distribution and cable management, SmartRack enclosures make ideal homes for mission-critical equipment. Vendor-neutral square hole/cage nut mounting for guaranteed compatibility with all EIA-310-D compliant 19" equipment. Enclosures ship fully assembled for rapid deployment and roll into place on heavy-duty casters. Toolless mounting slots allow quick installation of PDUs and vertical cable managers. Adjustable mounting rails include an easy-view depth index to eliminate time-consuming measurements. Lightweight modular doors and side panels provide safe, convenient service access. Integrated baying tabs facilitate combining enclosures in rows for standard data center baying applications. SmartRack enclosures hold up to 3000 lbs and support cooling, cable management, power distribution and monitoring features that keep critical servers and network equipment operating nonstop. Perforated doors permit massive front to rear airflow that exceeds servers manufacturer requirements. Enclosures are fully compatible with hot-aisle / cold-aisle data center configurations.

• Standard 42U SmartRack enclosure with additional shock pallet and loading ramps.
• 4 interior vertical posts with unthreaded square hole openings
• Standard 24" width for optimizing floor space
• Ships fully assembled
• Massive front to rear ventilation capacity
• 3000 lb stationary / 2250 lb rolling load capacity
• Locking, removable, reversible front and rear doors
• Locking, removable side panels keyed alike with doors
• Meets all enclosure requirements towards PCI DSS (Payment Card Industry
• Data Security Standard) Compliance

Mesh front door design for airflow and heat dissipation.

Vented on all pannels for excellent air circulation characteristics.

Top panel features cutouts for fans and cutouts for cable access. Platform features cutouts for cable access.

Features 4 fully adjustable internal equipment cage nut rails for #12-24 mounting screws in EIA universal spacing.

Comes packaged complete with front door, rear and side panels, leveling feet, casters, grounding bus bar, 2 pre-installed 80 CFM fans and equipments screws.

Quest Floor Enclosure w/ Vented Mesh Door, 27.5″W X 36″D - 45U

Quest 730 Series Floor Enclosures have a 27.5″ width by a 36″ depth, featuring a reversible vented steel mesh front door and rear vented split doors for access and ventilation. The rack has a spacious interior from the outer panels, making it ideal for 19” wide mounting on front and rear adjustable rails. They come complete with casters, floor levelers, a grounding bus, as well as two 80 CFM boxer fans for ventilation and air flow. These cabinets are constructed of heavy-duty steel, coming in a black powdercoat microfinish. Available assembled or non-assembled in knockdown boxes.

Quest Floor Enclosure w/ Vented Mesh Door, 27″W X 31″D - 45U

Mesh front door design for airflow and heat dissipation.

Vented on all pannels for excellent air circulation characteristics.

Top panel features cutouts for fans and cutouts for cable access. Platform features cutouts for cable access.

Features 4 fully adjustable internal equipment cage nut rails for #12-24 mounting screws in EIA universal spacing.

Comes packaged complete with front door, rear and side panels, leveling feet, casters, grounding bus bar, 2 pre-installed 80 CFM fans and equipments screws.

Quest Floor Enclosure w/ Vented Mesh Door, 23″W X 31″D - 45U

Quest 710 Series Floor Enclosures have a 23″ width by a 31″ depth, featuring a reversible vented steel mesh front door and rear vented split doors for access and ventilation. Ideal for 19” wide mounting on front and rear rails. They come complete with casters, floor levelers, a grounding bus, as well as two 80 CFM boxer fans for ventilation and air flow. These cabinets are constructed of heavy-duty steel, coming in a black powdercoat microfinish. Available assembled or non-assembled in knockdown boxes.

Quest Floor Enclosure w/ Vented Mesh Door, 23″W X 31″D - 34U

Quest 710 Series Floor Enclosures have a 23″ width by a 31″ depth, featuring a reversible vented steel mesh front door and rear vented split doors for access and ventilation. Ideal for 19” wide mounting on front and rear rails. They come complete with casters, floor levelers, a grounding bus, as well as two 80 CFM boxer fans for ventilation and air flow. These cabinets are constructed of heavy-duty steel, coming in a black powdercoat microfinish. Available assembled or non-assembled in knockdown boxes.