$75 to $100

Manhattan USB-C 11-in-1 Triple-Monitor Docking Station

USB 3.2 Type-C Male to HDMI, DP and VGA Females, Two USB 3.2 Gen 1, SuperSpeed (5 Gbps) Type-A Ports, USB 2.0 Type-A Port, USB-C PD Port, Gigabit RJ45 Port, SD/MicroSD Card Reader and 3.5 mm Audio Port; Aluminum, Dark Gray

The USB-C Docking Station with MST from Manhattan – drive three monitors at once with 11 connections to your device

Increase your productivity with your desktop, notebook or tablet using this highly versatile docking station from Manhattan. Its Multi-Stream Transport (MST) technology helps you to multitask on three monitors at the same time since it includes an HDMI, a DisplayPort and a VGA port.

Connections to all your peripherals

With three USB ports for mice, keyboards and flash drives, a 3.5 mm stereo port for a headset and two slots for SD/microSD cards, this docking station easily satisfies all your connectivity demands. Plus, its Gigabit RJ45 port provides the wired network connection that’s missing in most modern Ultrabooks and Macbooks.

Up to 100 W charging power with USB-C Power Delivery (PD)

The included USB-C PD port lets you charge your notebook with up to 100 W while simultaneously charging your other mobile devices, such as smartphones or tablets through the USB-A ports. The Power Delivery function also provides faster charging than standard chargers since it determines the power needs of compatible devices and supplies it at the quickest and safest rate.

Take your phone to the big screen

Connect any Android 9 and later smartphone that supports video output over USB-C and enjoy your apps and media even more. Watch a video on your monitor or flip through the slides of your presentation – all from your phone.

A multiport adapter that's made to go where you go

Sturdy aluminum housing makes this multiport adapter the perfect travel companion. Despite its massive connectivity options, it’s still compact enough to fit right in your backpack or computer bag with your main device. Thanks to its fold-out kickstand, you can place your laptop directly on the docking station.

RETYZ ProTie 32" 175lb Releasable Tie

Make it quick. Make it easy.?

The ProTie Releasable Cable Tie is the revolutionary new cable tie from RETYZ™. This design combines the high strength of nylon zip ties with a newly designed Releasable head. How easy is it to release this new cable tie? It takes only TWO fingers to squeeze and pull. That's it! That means no more cutting away zip ties. No more nicked wires and destroyed cables. No more "releasable" zip-ties that are almost impossible to use. With the Releasable cable tie from RETYZ™, you get the best of both worlds.? ?

Reduce, Reuse, Save Money!?

Regular zip ties have a single-use and then get cut/removed for disposal. That means continuously spending money on new cable ties. That's not the case with the ProTie Releasable Cable Tie from RETYZ™. This zip tie has been designed with versatility and reusability in mind and can be used and reused numerous times without losing strength or durability. That means adding or removing a cable to your well-managed cable bundles is easier than ever. Need to make some adjustments in your garden? The ProTie Cable tie has you covered.? ??

Easy to see. Safe to use.?

Don't let the simplicity of the ProTie Releasable Cable Tie fool you. RETYZ™ has packed the ProTie Cable tie with features. You'll never have to worry about missing one of these ties again! Available in high-visibility neon green, you'll be able to see these ties almost anywhere. Rough edges are a thing of the past. The?SafetyEdge?found on the ProTie Releasable Cable Tie was developed for repeated use. It features a rounded tail and smooth, beveled edges, which makes this tie easy on the hands and even easier to use. The Comfort Reflex Thumbpad, in conjunction with the Index Backplate, makes releasing effortless.

RapcoHorizon 16GA Series Speaker Cable

RapcoHorizon H series 16GA speaker cable uses bare copper stranded, twisted pair conductors – each individually jacketed with an overall round jacket added for durability. This commercial-grade speaker cable is flexible and will stand the test of time. 1/4 inch connectors on both ends

Wavenet 22AWG/2C Solid Unshielded Riser (CMR) Security Cable (500-100ft)

BZBGEAR SDI Siamese cables are made using 75 ohm shielded coaxial cable with high-quality BNC connectors. The addition of a 2-conductor 18-gauge stranded copper wire allows power or serial control to be carried with the video signal on a single wire run. They are designed to reliably support 3G-SDI cameras and equipment at resolutions up to 1080P over distances up to 100m. The cables feature a woven shield to help reject electromagnetic interference and deliver pristine images free from artifacts. They are suitable for both temporary and permanent applications requiring a high-quality SDI connection.

Procell Alkaline AAA, 1.5V Battery

Procell Alkaline AAA industrial batteries are general purpose batteries, ideal for powering mid and low drain professional devices, such as security keypads, remote controls and glucometers. Also available in AA, C, D and 9V sizes.

Recommended for general purpose professional devices

• Reliable long-lasting power (vs. prior Procell Alkaline AAA batteries)

• Manufactured using superior cell design (vs. prior Procell Alkaline AAA batteries) to ensure high-quality cell construction. Each battery comes with a ‘quality warranty’. Design, safety, manufacturing, and qualification follow Procell’s stringent battery standards, which incorporate parts of the ANSI and IEC battery standards.

• Economically packaged in bulk and individually date-coded for effective inventory management.

• Used by manufacturers around the world: Procell Alkaline batteries have been designed in collaboration with manufacturers to work best in professional devices

• Operating temperatures from -4°F to 129.2°F.

Typical Applications

• Remote Controls
• Sensors
• Security keypads
• Wireless mouse

Procell Alkaline AA, 1.5V Battery

Procell Alkaline AA industrial batteries are general purpose batteries, ideal for powering mid and low drain professional devices, such as smoke/carbon monoxide detectors, security keypads, remote controls, wireless mice, keyboards, motion sensors and flushometers. Also available in AAA, C, D and 9V sizes.

Recommended for general purpose professional devices

• Reliable long-lasting power (vs. prior Procell Alkaline AA batteries)

• Manufactured using superior cell design (vs. prior Procell Alkaline AA batteries) to ensure high-quality cell construction. Each battery comes with a ‘quality warranty’. Design, safety, manufacturing, and qualification follow Procell’s stringent battery standards, which incorporate parts of the ANSI and IEC battery standards.

• Economically packaged in bulk and individually date-coded for effective inventory management.

• Used by manufacturers around the world: Procell Alkaline batteries have been designed in collaboration with manufacturers to work best in professional devices

• Operating temperatures from -4°F to 129.2°F.

Typical Applications

• Remote Controls
• Sensors
• Security Keypads
• Wireless Mouse

j5create JCD381 USB Type-C Dual HDMI Mini Dock

The JCD381 USB 3.1 Type-C Mini Dock provides extra connectivity for your computer. These pocket-sized multi- adapters allow you to add an additional USB 3.1/3.0/2.0 computer peripheral, Dual HDMI monitor or gigabit Ethernet through your USB port. USB type–C is the new standard for connecting PCs and laptops and will eventually replace all current USB cables and connectors.

This new USB standard can be found on laptops, phones, tablets, etc. The USB type–C has a slim and reversible design, so there is no wrong way to plug it in. USB type–C offers greater power delivery and faster data transfer rates of up to 10 Gbps.

Want to use Heckler AV Cart or Heckler TV Stand, but your display does not have a VESA 400x400 mounting pattern? No problem. These strong, simple adapters do the trick. With these adapters you can mount displays with horizontal and vertical mounting holes spacing of 200, 300, 500, and 600 millimeters.

Quest HDI-6150 VGA + STEREO TO HDMI CONVERTER

Quest now offers a complete line of HDM Converters and Adapters ideal for any audio/video installation.

9 Inch Journeyman Connector Crimping Side Cutting Pliers

The Klein Tools Journeyman High-Leverage Side-Cutting Pliers feature a die behind hinge for superior leverage when crimping non-insulated connectors, lugs and terminals. The rivet is closer to the cutting edge for 46% greater cutting and gripping power over other plier designs.

Manufactured in the USA with the quality you've come to expect from Klein Tools, these pliers are precision-hardened for unparalleled ruggedness. The state-of-the-art Journeyman handles utilize dual material to provide a solid, comfortable grip without sacrificing strength and durability.

Middle Atlantic Hinged Access Panel - Vented - 6 Space

EcoFlow DELTA Pro Extra Battery Cable

Connects the DELTA Pro to the DELTA Pro Smart Extra Battery using the Extra Battery port on the back of the unit.

EcoFlow Battery Connection Cable (DELTA Pro Ultra)

For inverter-battery and battery-battery connections.

SSF™ LC MM Duplex Connector clip w/Polarity Tubes

Convert individual Cleerline™ LC connectors to duplex assemblies with our LC mm Connector Clips. Simply snap LC connectors into the clip and go! Our specialized design holds connectors securely, allowing easy connection to duplex ports. Disconnection of the assembly is also simple due to the clip’s large push bar, which simultaneously depresses both LC connector tabs.

For ease of identification, each clip features A/B connector labeling. Yellow and white polarity connection tubes are also included in each package. Place tubes on cables prior to terminating cables and installing clips.

BlueMamba Gap Sealer 

BlueMamba Gap Sealer - 2.5" Thickness

BlueMamba Gap Sealer, a revolutionary solution tailored to optimize data halls with utmost efficiency and costeffectiveness. Available in various sizes and customizable specifications, BlueMamba is proudly assembled in the USA using ASTM-E84 Class A materials. Designed to fill gaps as small as 3/8 inch, this patented expanding gap sealer effortlessly eliminates undesired voids between, under, and within server cabinets.

Experience cutting-edge technology that minimizes unwanted air circulation, combats short-cycling, eliminates hotspots, and maximizes cooling capacity. Our professional and welcoming solution prioritizes your operational efficiency, comfort, and peace of mind. Our affordable and reliable sealing technology reduces air circulation between intakes and exhausts, eliminating wasted cooling capacity and protecting IT equipment from shutdowns. Trust in our expertise as we redefine air management in data halls, making them more efficient and cost-effective. Choose BlueMamba Gap Sealer for a transformative solution that exceeds expectations and sets a new industry standard.

2-cell 12V, Sealed Lead Acid Battery for APC BACK-UPS PRO BN1500M2, BR1350MS

BTI APCRBC161-SLA161 2-cell 12V Sealed Lead Acid Battery for APC BACK-UPS PRO BN1500M2, BR1350MS, BN1500M2-CA, BR1350MS-TW, BP1050, BR1500M2-LM, BR1200SI

Anderson Saf-D-Grid C20 to SDG400 16A 250V 14/3 SJT Power Cord - Blue

Anderson Saf-D-Grid C20 to SDG400 16A 250V 14/3 SJT Power Cord - Black

Mid Span Slitter for ABF Cables, 1,1 - 1,6 mm

Designed with 6 precision grooves and blades, this mid span slitter is perfect for slitting the cable sheathes off Air Blown Fiber cable without damaging the fiber inside.

Super Slim Cat6 (UTP) 550 MHz Network Patch Cable, 28AWG, 10 Pack - White

Super Slim Cat6 (UTP) 550 MHz Network Patch Cable, 28AWG, 10 Pack - Blue

8K UHD HDMI 2.1 Switcher with Audio De-embedder (8K60, 4K120Hz 4:4:4 10bit VRR, FVA, ALLM support)

Elevate your multimedia experience with the BG-8K-HS21A 48Gbps 2x1 HDMI Switcher. This high-performance device seamlessly switches between two HDMI sources to one HDMI display, supporting video resolutions up to 8K@60Hz 4:2:0. Perfect for a variety of applications including home entertainment, gaming, and multimedia, this versatile switcher features advanced EDID management and an audio de-embedding function, making it an ideal solution for any large-screen display scenario.

INTERFACES

1. IR Window: IR input signal receiving window.
2. POWER LED: The power LED lights in green when the device is working, and red when the device is on standby.
3. IN LED (1~2): When the HDMI IN 1/2 port is selected as the signal source input channel, the corresponding green LED will be on.
4. OUT LED: When the HDMI OUT port connects to a display device and outputs a signal, the green LED will be on.
5. AUTO LED: When the auto-switching function (switch to the corresponding signal input channel when the signal source is connected.) is turned on, the green LED will be on.
6. SWITCH button: Used to select a signal source for the OUT port. Short pressing this button will allow the device to switch any of the two HDMI input signals to the OUT port. Long pressing this button for 3 seconds will turn on/off the auto-switching function.
7. EDID Dip switch: Use the DIP switch to set EDID.
8. SERVICE: Firmware update and debug port.
9. IN port (1~2): HDMI signal input port, connecting to HDMI source device such as DVD or PS5 with an HDMI cable.
10. OUT port: HDMI signal output port, connecting to HDMI display device such as TV or Monitor with an HDMI cable.
11. OPTICAL: Optical fiber audio output port.
12. L/R: Analog audio output port.
13. DC 5V: DC 5V/1A Power input port.

Caddy Wire Basket Tray Clip, 3/16"-5/16" Wire

Caddy 3/4 Inch J-Hook

6800mAh PD 100W 4-Port Power Bank

Charge laptops, tablets, and other mobile devices at anywhere and anytime you need to. No more finding wall plug for charging your devices when they are running out of power!

Charge the power bank via USB-C® 1st port with any PD power supply, highest power input support up to 100W. After the power bank is fully charged, single using USB-C® 1st port is also able to support PD charging to laptops up to 100W. The IC will smartly distribute power between the USB™ ports so other devices can be charge at the same time too.

The power bank is also implementing with short circuit, overcharge, discharge, and overcurrent protection to prevent damage to both power bank itself and connected devices.

With perfect calculation, 26800mAh (99.16Wh) is safe to hand carry on flight without needing declaration before boarding nor check-in.

Switching Behavior:

1. Press the button once, the LED indicators will display the current battery level. If no device is connected, the LED indicators will turn off after 30 seconds.
2. Press the button twice in quick succession, the USB™ Type-A port on JPB264100 will activate low power charging mode. The LED indicators will flash from left to right three times, then display the current battery level. If no device is connected within 30 seconds, the LED indicators will turn off.
   • After 2 hours, the USB™ Type-A port will return to normal charging mode.
   • During low power charging mode, if a device is connected to the USB™ Type-A within 2 hours, the low power charging mode will be extended by another 2 hours.
3. When the JPB264100 is not connected to any device, long-press the button for 3 seconds will force JPB264100 shutdown.
4. If all five LED indicators are flashing simultaneously, please immediately disconnect the charging devices and perform the following checks:
   • Check if the charging cable is damaged. If the cable is damaged, do not continue to use it and replace it with another charging cable.
   • Check if the charging port and cable connector have any liquid. If so, please wipe them clean and after confirming charging port and cable connector are dry, you can resume charging

Mini Junction Box Mount

For mounting a mini camera to a standard junction box.

Compatible with

• Cameras: Mini Series
• Mounts: ACC-MNT-SJBOX-1

Cat6, 110-Type, Patch Panel, 24-Port, 2U, T568A/B, W/Rear Cmgt. Panels

This 24-port category 6 1U racks and cabinet mountable patch panel is ideal for small-to-medium sized installations. The 24-port version offers compact cross-connect 110-Type IDC block. The patch panel holds up to twenty-four ports for centralized cabling connections, and is useful for future modifications.

1P 22G SLD SHLD PLEN II Bulk Speaker Wire, Reel-In-Box

4C 22G STRD USHLD PVC JKT Bulk Control Cable, Reel-In-Box

RJ45 & RJ11/12 Modular Pass-through Crimper with Tail Crimping Slots

Designed to crimp RJ11/12 and RJ45 pass-through connectors with additional crimping slots for shielded connector tails, this crimping tool is perfect for any network technician working with CAT3, CAT5, CAT5e, CAT6, or CAT6A cables.

Double Decker Steel Cable Caddy, 21" Wide

The Jonard Tools CC-5442 Cable Caddy keeps cable spools organized and easily accessible. This caddy facilitates the transportation and storage of spooled fiber optic, copper, and other cables in a wide range of spool sizes, and can hold up to two 12" (30.48 cm) diameter reels simultaneously.

Replacement Blade for AST-210 CableSaber+™ (Pack of 2)

This is a two pack of replacement blades for the AST-210 CableSaber+™.

4C/22 AWG Solid FPLR PVC Fire Alarm Cable Coil Pack - 500ft

Applications:

Power limited fire alarm and communications cable for Riser and Non-Riser applications. Fire Alarm, Fire Protective Circuits, Smoke Detectors, Monitor/Detection, Signal, Control Circuits, Initiating Circuits, and Notification Circuits.

2C/18 AWG Solid FPLR PVC Fire Alarm Cable - 500ft Box

Applications:

Power limited fire alarm and communications cable for Riser and Non-Riser applications. Fire Alarm, Fire Protective Circuits, Smoke Detectors, Monitor/Detection, Signal, Control Circuits, Initiating Circuits, and Notification Circuits.

14″ Plastic Wiring Enclosure with Cover (Model E)

ICC’s 14-inch residential wiring enclosure with cover is designed for single-family homes with a wireless network. It serves as a structured media enclosure providing a central distribution point for voice, data, video, audio, or security services. The enclosure and cover are made with sturdy ABS plastic to prevent cracking. The plastic is lightweight to allow better Wi-Fi signal and coverage. The enclosure has a universal mounting pattern to accommodate ICC’s and most manufacturers’ active modules. The cover snaps onto the enclosure and can be screwed down to restrict access. It’s also vented to provide heat dissipation.

MOFO™ Media Over Fiber Optic cable plate connectivity points

The TechLogix MOFO™ PT Series is the first HDMI & USB plate solution backed with fiber. 

Forget clunky extenders and bandwidth-limited copper cable. The MOFO™ PT Series combines fiber-based cabling with traditional table inserts and wallplates, delivering cleaner installations, fewer failure points and better bandwidth. Simply pull, plug and play. 

The MOFO™ PT Series includes HDMI and USB cables in a variety of lengths, aluminum table insert grommets in black or white finish, and aluminum decora wall plates in black or white finish. If the wall box is too shallow for the head of the cables, add a wall plate spacer or two; each spacer adds 5.3mm (0.21 in) from the wall to the wall plate. Simply combine components based on your installation.

Compatible HDMI and USB cables are sold separately.

Intellinet Outdoor Gigabit High-Power PoE+ Extender Repeater

IEEE 802.3at/af Power over Ethernet (PoE+/PoE), Extends Range up to 100 m (328 ft.), Metal, IP65

Extend the range of a PoE connection — even in harsh outdoor conditions.

The Intellinet Network Solutions Outdoor Gigabit High-Power PoE+ Extender Repeater (561211) is designed to extend connection distances from a PoE source to an output device up to 100 m (328 ft.) via Cat5e or Cat6 cable. Cover even longer distances by cascading up to five extenders. The PoE+ Extender Repeater does not need an additional power supply, as it draws the power it needs from the PoE input.

Designed for Outdoor Use

With an IP65 rating and a vast operating temperature range of -40 – 75°C (-40 – 167°F), the Intellinet Network Solutions Outdoor Gigabit High-Power Power over Ethernet Extender Repeater can be deployed in harsh conditions, which sets it apart from its indoor counterpart, the Intellinet Network Solutions PoE+ Extender (560962).

Simple Installation

Simply connect the "PoE In" port with your PoE injector or PoE switch and connect the "PoE Out" with the PoE device that you wish to connect (e.g., a VoIP phone or a PoE network camera). That's it. There is nothing to configure. It simply could not be any easier.

Reduced Wiring Costs

No need to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the PoE Extender to the LAN switch port and use the existing Cat5 cabling to deliver DC power as well as transfer data.

Power over Ethernet 802.3at Compliant

The Intellinet Network Solutions Outdoor Gigabit High-Power PoE+ Extender Repeater supports the IEEE 802.3at protocol. It is designed to forward data at Gigabit speeds and provide up to 25 watts of input power to a connected IEEE 802.3af- or IEEE 802.3at-compliant device. The cable length on both ends can be up to 100 meters (328 ft.), bringing the total distance to 200 m (656 ft.).

Cascading Power

Daisy-chaining multiple PoE extenders increase the transmission distance even farther. Be advised that each added PoE extender draws up to 4 W of usable PD power, and additional power losses will occur as the cable length increases.

Intellinet Industrial Gigabit PoE++ Injector

One 84 W Port, IEEE 802.3bt (4PPoE) Compliant, IP30-Rated Metal Housing, DIN-Rail Mount

Hardened Industrial Ethernet Gigabit PoE++ Injector - 85 W for an IEEE 802.3bt Powered Device

The Intellinet Network Solutions Industrial Gigabit PoE++ Injector lets you connect your IEEE 802.3bt/af/at-compliant wireless access point, IP phone, network camera and more to a non-PoE LAN switch port so it can supply both a power and a network connection up to 100 meters (328 ft.) away. This 4PPoE injector has an output power rating up to 85 watts, which is enough for even very power-hungry PoE++ devices like motorized PTZ cameras, thin clients, point-of-sale systems, lighting controllers and digital signage applications.

Designed for harsh industry environments

This Power over Ethernet injector was designed to give you the network connections you need in places that are less than calm or temperate. With its rugged, IP30-rated metal housing, it operates reliably and quietly, even under extreme temperatures that range from -40 to 167°F (-40 to 75?). In combination with its DIN-rail mounting option and a safe DC power input with plenty of safety features, this injector is ideal for IoT applications in Industry 4.0 and more.

Reduced wiring costs

There's no need to run AC power lines to get your PD set up and working. Once you've quickly wired DC power to the injector through its three-pin terminal block, simply connect this Ultra PoE Injector to the LAN switch port, and use your existing Cat5/6/6a cabling to deliver power as well as transfer data at 10/100/1000 Mbps speeds up to 100 m (328 ft.).

Safe protection for your expensive network equipment

The auto-sensing technology of this PoE Injector ensures that your products are protected from power problems like short circuits (short GND), current overloads and high voltages. Port surge protection up to 6 kV and ESD protection up to 8 kV make its safety complete.

8-Port Gigabit Ethernet PoE+ Switch

IEEE 802.3at/af Power over Ethernet (PoE+/PoE) Compliant, 60 W, Desktop

Save installation time and money with PoE

The Intellinet Network Solutions 8-Port Gigabit PoE+ Switch is designed to pass both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with eight Gigabit Ethernet ports, this switch can power wireless LAN access points and bridges, VoIP phones, IP video cameras and more while delivering network speeds of up to 1000 Mbps.

Power over Ethernet 802.3at

The Intellinet Network Solutions 8-Port Gigabit PoE+ Switch supports the IEEE 802.3at protocol and is designed to inject up to 30 watts of power per port*. IEEE802.3af- or IEEE802.3at-compliant devices attached to the switch require no additional power, thus eliminating the time and expense of electrical rewiring and minimizing the unsightly clutter caused by power supplies and adapters in awkward places such as ceilings and walls. Any mix of PoE and non-PoE devices is supported, and thanks to its short circuit, overload and high-voltage protection function, your equipment is well-protected.

Private VLAN

The Intellinet Network Solutions 8-Port Gigabit PoE+ Switch features port isolation, also referred to as "Private VLAN". It isolates all ports from each other and only allows access to the uplink port. This is useful, for example, if a private VLAN is a hotel where each room or apartment has a network port for Internet access. All ports can all access the Internet, but they cannot access each other. The setup is easy: Activate the VLAN switch on the front panel of the switch, and the VLAN is enabled. That is secure port isolation with the flip of a switch!

Green Ethernet Technology

More often than not, a network switch does not utilize all its ports at all times. Normally, when a computer, notebook, network printer or other network device is powered down, the switch continues to consume the same amount of power as if it were active. Now, thanks to the new energy-efficient IEEE 802.3az technology, the Intellinet Network Solutions 8-Port Gigabit PoE+ Switch detects link status to all connected devices and reduces the power usage of ports not in use. In addition, the Intellinet Network Solutions switch can adjust the level of power output based on the length of the network cable connected to a particular port. With the Intellinet Network Solutions 8-Port Gigabit PoE+ Switch you will enjoy maximum network performance, but when things slow down it automatically scales back power usage to conserve energy and save money.

* Total PoE budget for this switch is 60 watts. Per-port average power distribution is 7.5 watts; maximum per-port power usage cannot exceed 30 watts.

Klein Tools Cat6 Pass-Thru Modular RJ45 Connector 200 Pack

Exclusive Klein-designed Pass-Thru™ modular plugs for fast, reliable connector installations. Cable easily passes through the connector for consistent and secure termination. Saves time, trims flush to end face when used with Klein Tools Pass-Thru™ Modular Crimper VDV226-110, and eliminates wasted materials. These CAT6 connectors are fully compliant with all PoE standards.

NEMA 6-20 20A 250V 12/3 SJT Power Extension Cord - Black

L6-30P to 2x C19 20A 250V 12/3 SJT SPLITTER Power Cord - Black

EcoFlow DELTA Pro Remote Control

SCP 6 Port FFTH Demarc Fiber Wall Box

The 6 port outdoor-rated wall-box enclosure is a simple, cost-effective solution for terminating, adapting, and coupling fiber optic cables in the field.

Its durable plastic construction makes it ideal for indoor or outdoor applications, and its modular design accommodates up to eight standard 13mm panel mount couplers and/or adapters.

Kendall Howard Linier Server Cabinet Vertical Rail Kit

The LINIER® Server Cabinet Vertical Rail Kit can be installed in any of the LINIER® Full-Size Cabinets to provide a 10-32 tapped rail solution. This tapped rail kit can replace the cage nut-style rails that are included with the LINIER® Server Cabinets for installers who prefer a tapped rail mounting solution.

• Fully adjustable
• Includes two 10-32 tapped rails
• Can be used with the LINIER® Full-Size Server Cabinets
• Installation hardware included
• Made in the USA
• 5-Year Limited Warranty

Vanco IR Control Kit over HDMI, 280701

The 280701 is an IR over HDMI Kit that allows IR signals to be distributed from one display location to a source location. The source can be hidden and controlled as if they were right under the TV. The 280701 includes 1 IR emitter, 1 IR receiver, and 2 HDMI adapters. Simply connect the HDMI adapters to your source and display, connect the HDMI cable going from the source to the display, as well as the IR cables to the adapters and you are good to go! For the ability to place a source in a hidden location such as an equipment rack, while keeping the display location clean, the 280701 is the perfect solution.