Lifetime Warranty

100GBASE-SR4 QSFP Transceiver MPO Cisco Compatible

The GigaTech Products QSFP-100G-SR4-S-GT is programmed to be fully compatible and functional with all intended CISCO switching devices. This QSFP optical transceiver is a parallel fiber optical module with four independent optical transmit and receive channels and is compliant with SFF-8665 and QSFP28 MSA standards. This module is designed for multimode fiber usingMPO/MTP connection and operates at a nominal wavelength of 850nm up to 70m over OM3 and 100m over OM4 fiber.

Applications:

• 100GBASE-SR4 Ethernet

40GBase-SR4 QSFP+ MMF Module Cisco Compatible

The GigaTech Products QSFP-40G-SR4-GT is programmed to be fully compatible and functional with all intended CISCO switching devices. This QSFP+ optical transceiver is a parallel fiber optical module with four independent optical transmit and receive channels and is compliant with SFF-8436 and QSFP+ MSA standards. This module is designed for multimode fiber using MPO/MTP connection and operates at a nominal wavelength of 850nm up to 100m over OM3 and 150m over OM4 fiber.

Applications:

• 40GBASE-SR4 Ethernet
• Breakout to 4X 10GBASE-SR Ethernet
• Infiniband SDR, DDR and QDR

25GBASE-SR SFP28 Module MMF Cisco Compatible

The GigaTech Products SFP-25G-SR-S-GT is programmed to be fully compatible and functional with all intended CISCO switching devices. This SFP module is based on the 25G Ethernet IEEE 802.3by standard and is designed to be compliant with the SFP Multi-source Agreement (MSA). This module is designed for multimode fiber and operates at a nominal wavelength of 850nm.

Applications:

• 25GBASE-SR/SW Ethernet

10GBASE-LR SFP+ Module SMF Cisco Compatible

The GigaTech Products SFP-10G-LR-GT is programmed to be fully compatible and functional with all intended CISCO switching devices. This SFP module is based on the 10G Ethernet IEEE 802.3ae standard and is designed to be compliant with the SFF-8431 SFP Multi-source Agreement (MSA). This module is designed for single mode fiber and operates at a nominal wavelength of 1310nm up to 10KM.

Applications:

• 10GBASE-LR/LW Ethernet
• 10GB Fiber Channel

1000Base-T SFP RJ45 Connector Cisco Compatible

The GigaTech Products GLC-T-GT is programmed to be fully compatible and functional with all intended CISCO switching devices. This SFP module is based on the Gigabit Ethernet IEEE 802.3 and 1000Base-T standard and is designed to be compliant with SFF-8472 SFP Multi-source Agreement (MSA). This module is designed for copper wire cabling up to 100 meters.

Applications:

• 1.25GBd Gigabit Ethernet

1000BASE-LX SFP SMF E-Temp DOM Cisco Compatible

The GigaTech Products GLC-LH-SMD-GT is programmed to be fully compatible and functional with all intended CISCO switching devices. This SFP optical transceiver is based on the Gigabit Ethernet IEEE 802.3 standard and is designed to be compliant with SFF-8472 SFP Multi-source Agreement (MSA). This module is designed for single mode fiber and operates at a nominal wavelength of 1310nm.

Applications:

• 1.25GBd Gigabit Ethernet

Kendall Howard ESD Cabinet 32” x 16” Shelf

The Kendall Howard ESD Cabinet 32” x 16” Shelf provides a solution to support items and devices securely inside the enclosed ESD Cabinet. This easy-to-install shelf is mounted to the inside of the cabinet via the louvered panel and supported with two screws to add to its rigidity and grounds the shelf. An ESD dissipative mat is also included with each shelf to provide an ESD safe storage option.

• ESD protected
• Includes ESD mat
• 100 lb weight limit
• Made in the USA
• Limited Lifetime Warranty

Kendall Howard ESD Cabinet Drawer

The Kendall Howard® ESD Sliding Drawer offers additional storage inside of an enclosed static controlled environment. Drawer sliders will extend out to a maximum of 14” providing easy access to stored items. The drawer is grounded and supported through the sturdy ESD Cabinet frame. Finished off in a gloss black powder coat.

• 100 lb weight capacity
• Sturdy and smooth drawer sliders
• Made in the USA
• Limited Lifetime Warranty

Kendall Howard Cabinet 23" x 32" Pegboard

The Kendall Howard™ ESD Cabinet 23” x 32” Pegboard is just one more way to maximize versatility and storage potential. Once installed to the ESD Cabinets Louvered Panel, the Pegboard will become grounded and conductive which allows it to protect sensitive equipment. Measuring 23” tall and 32” wide, this Pegboard offers multiple peg accessory mounting options and the ability to install 1/8” sized pegboard accessories. Pegboard accessories are sold separately.

• Installs in seconds
• ESD protected
• Made in the USA
• Limited Lifetime Warranty

Kendall Howard ESD Cabinet

The Kendall Howard™ ESD Cabinet provides technicians in static control environments an ESD safe storage solution for protecting sensitive electronic components across a multitude of industries.?Designed with versatility and protection in mind. This Cabinet is fully enclosed and equipped with a locking door keeping sensitive equipment safe. Inside the Cabinet is complete with a fully integrated louvered panel system featuring 153 louvered cut outs for mounting additional accessories. Available accessories include Slide out Drawer, Shelves & Pegboard options. Top surface of the Cabinet is ESD protected with an ESD safe mat. Cabinet includes two grounding options to ensure proper static protection. Ground 1 is through a 10’ external Earth ground wire. Ground 2 is established with a unique aluminum boot attached to a leg leveler to provide a connection to all non-insulated?or?ESD safe flooring.

• 500 lbs. Weight limit
• 78” Tall x 36” Wide x 18” Deep
• Clear Acrylic doors
• Gloss Black powder coat finish offers an easy to clean and a durable surface
• Locking door
• Fully ESD Protected interior and on top surface of cabinet
• Limited Lifetime Warranty
• Made in the USA
• UPC: 879447006155

Heckler AV Cart for Google Meet Series One Room Kits

Deploy Google Meet Series One Room Kits throughout your conference rooms and open spaces with Heckler AV Cart. This special edition cart includes all of the hardware you'll need to configure video meeting solutions that adapt to your changing needs.

Note: This product has a two day shipping lead time

Heckler AV Cart for Logitech Rally Plus

Video-enabling the largest workspaces and meeting rooms is the best way to keep your teams connected and competitive. Placing these solutions on wheels makes your organization adaptable and flexible. With this special edition cart, we’re making it hassle-free to deploy the best - quickly.

Note: This product has a two day shipping lead time

Heckler AV Cart - Base Configuration

Modernize the AV carts in your workspace with a rolling stand that is attractive, space-saving, and future-ready. With Heckler AV Cart Base Configuration you can accessorize your rolling stands to keep your organization connected with the latest technology.

Note: Due to high demand, please allow three weeks for this item to ship

This versatile grip holds a wider range of ACSR cable sizes reducing the number of grips needed. Klein Parallel Jaw Grips are lightweight and compact. The round jaw holds 0.18 to 0.60-Inch diameter cable with a maximum safe load of 5000 lbs. Features a spring that closes the grip on the cable to maintain the initial position.

8K Fiber Ultimate High Speed HDMI Cable

Velox’s ultra-premium construction and high-tech engineering results in clean, reliable performance for the demands of higher bandwidth 8K/10K content in long runs. These ultimate high speed hybrid technology fiber HDMI® cables with Ethernet are engineered with bandwidth capability up to 48Gbps for 8K content.

Enable-IT Outdoor Coax Gigabit PoE Extender Kit 1-Port

The Enable-IT 865QW PRO Ultra PoE Extender is the world’s only available solution to Extended Ethernet and Ultra High Power PoE in a complete solution that exceeds the IEEE distance limitations for all Ethernet equipment and 802.3af/at/bt Power Over Ethernet (PoE) Standards. The 865QW PRO enables the simple installation of a high powered PoE devices like Axis Q or other high power IP Cameras, Aruba and Cisco Access points up to 1,968ft (600m) from your LAN and Power Source. This is ideal for installing any PoE IP Security cameras or PoE WiFi Access Points.

This Ultra PoE Extender drives the reach of Ultra high power PoE and Ethernet to more than (6) six times the typical Ethernet distance limit of 328ft, up to 1,968ft (600m) distance. There is no substitute for our Expertise – Only Enable-IT 865QW solution can. Made in the USA with quality and pride – the only manufacturer to do so in this industry.

To increase the durability and extended use of the product providing maximum future technology protection, 865Q PRO Ultra PoE Extender have been designed to meet the challenge of modern switched LANs and allows you to add features and capacity as your network expands. The 865QW PRO Ultra PoE Extender Solution delivers full duplex Gigabit Ethernet up to 600MB/s throughput.

This is trusted Business Reliable Professional Grade Ultra PoE Extension without the high cost of repeaters. Why risk your business to lower quality imported equipment? The value of your network communications should be a protected investment. Beware of Cheap Chinese “so called Business Use” (Amazon Home use) gear that is banned in the US due to proven hidden spyware.

Enable-IT PoE Extender Kit 1-Port - Firefold

The Enable-IT 865Q PRO Ultra PoE Extender is the world’s only available solution to Extended Ethernet and Ultra High Power PoE in a complete solution that exceeds the IEEE distance limitations for all Ethernet equipment and 802.3af/at/bt Power Over Ethernet (PoE) Standards. The 865Q PRO enables the simple installation of a high powered PoE devices like Axis Q or other high power IP Cameras, Aruba and Cisco Access points up to 1,968ft (600m) from your LAN and Power Source. This is ideal for installing any PoE IP Security cameras or PoE WiFi Access Points.

This Ultra PoE Extender drives the reach of Ultra high power PoE and Ethernet to more than (6) six times the typical Ethernet distance limit of 328ft, up to 1,968ft (600m) distance. There is no substitute for our Expertise – Only Enable-IT 865Q solution can. Made in the USA with quality and pride – the only manufacturer to do so in this industry.

To increase the durability and extended use of the product providing maximum future technology protection, 865Q PRO Ultra PoE Extender have been designed to meet the challenge of modern switched LANs and allows you to add features and capacity as your network expands. The 865Q PRO Ultra PoE Extender Solution delivers full duplex Gigabit Ethernet up to 600MB/s throughput.

This is trusted Business Reliable Professional Grade Ultra PoE Extension without the high cost of repeaters. Why risk your business to lower quality imported equipment? The value of your network communications should be a protected investment. Beware of Cheap Chinese “so called Business Use” (Amazon Home use) gear that is banned in the US due to proven hidden spyware.

Enable-IT Outdoor Coax Gigabit PoE Extender Kit 2-Port

The Enable-IT 865WC PRO Outdoor Coax Gigabit PoE Extender is the fastest encrypted and Secure PoE Extender on the planet bar none!

Designed & Made in the USA with quality and pride. These American-made Enable-IT 865WC PRO Outdoor Coax Gigabit PoE Extender uses industry Coaxial standard 75 Ohm BNC connectors to make installing in most any environment very easy. We have engineered most of the technical complexity into automatic line adjustments so the plug and go simplicity on your existing or new wiring is a snap.

Ethernet Extension Experts designs and manufactures the Enable-IT 865WC PRO Outdoor Coax Gigabit PoE Extender kit, along with its entire product line, in the USA that makes us more responsive to customer needs . We take great pride in using the highest quality materials and actual craftsmanship when building our products. We even can customize these at time of order to fit your specific needs as we manufacture in our very own US West coast facilities.

This is trusted Business Reliable Professional Grade PoE Extension without the high cost of fiber or unsecured wireless. Why risk your business to lower quality imported equipment? The value of your network communications should be a protected investment. Beware of Cheap Chinese “so called Business Use” (not even suitable US Home use) gear that is banned in the US due to proven hidden spyware.

The Enable-IT 865WC PRO Outdoor Coax Gigabit PoE Extender kit uses 75 Ohm coaxial wiring for best performance. The 865WC PRO Outdoor Coax Gigabit PoE Extender can support up to nine 865XC CPE units on the same coax wire, and actually can run on just 1 physical wire!

Keep in mind that all DC including (PoE) voltage drops over distance and thicker gauge wire will help this issue. As a rule of thumb you will lose up to 6V per every 200 feet of wiring, depending on the gauge. For example in Category 5 or 6 24 AWG there is less wire/copper to conduct electricity which is lower power strength at distance due to impedance. Lower power strength increases the amperage and that generates more heat in the wire. Depending on distance, you may need to use more pairs or wire or 18 gauge wiring as a dedicated DC power buss – like low voltage landscape wire and run Ethernet on a 1-pair 24 AWG. There are options to maximize your distance and PoE output when used in conjunction with our PoE Extenders or PoE DSLAM that can power a 56V 60W PoE IP PTZ Camera at 3,000 ft away.

Enable-IT 2-Port Outdoor Gigabit PoE Extender Kit

The Enable-IT 865W PRO Outdoor Gigabit PoE Extender is a Gigabit wire speed throughput PoE Extender.

World’s Fastest and Secure, copper Ethernet Extender period, Guaranteed!Designed & Made in the USA with quality and pride. The American-made Enable-IT 865W PRO Outdoor Gigabit PoE Extender over copper uses industry LAN standard RJ-45 (8-pin) connectors to make installing in most any environment very easy.We have engineered most of the technical complexity into automatic line adjustments so the plug and go simplicity on your existing or new wiring is a snap. Ethernet Extension Experts designs and manufactures the Enable-IT 865W PRO kit, along with its entire product line, in the USA that makes us more responsive to customer needs.
We take great pride in using the highest quality materials and actual craftsmanship when building our products. We even can customize these at time of order to fit your specific needs as we manufacture in our very own Aerospace Certified Quality AS9100D US West coast facilities.This Enable-IT 865XW PRO Outdoor Gigabit PoE Extender over copper is trusted Business Reliable Professional Grade Gigabit Ethernet Extender without the high cost of fiber or un-secure wireless. Why risk your business to lower quality imported equipment? The value of your network communications should be a protected investment.
Beware of Cheap Chinese “so called Business Use” (not even suitable US Home use) gear that is banned in the US due to proven hidden spyware.

The Enable-IT 865W PRO Outdoor Gigabit PoE Extender kit uses 4-pair copper wiring (CAT 2 Telephone wire all the way up to CAT 7 rated). The 865W PRO Outdoor Gigabit PoE Extender can support up to 9 CPE units on the same 4-pair of wire.

Leverage any 4-pair of existing or new wiring that is contiguous all the way up to 3,000ft or 915m encrypted and secure, effectively saving you thousands in labor, administration, and security. Think fiber is cheap? Have you ever priced or paid for fiber troubleshooting? Think again.

Dual port Gigabit LAN built into each end coupled with industrial strength components to survive harsh temperature extremes delivers superior performance, value and capabilities no other competitor can touch.

Enable-IT 1-Port Coax Gigabit PoE Extender Kit

The Enable-IT 865XC PRO Gigabit Coax PoE Extender is a Gigabit wire speed throughput Coax (Power over Ethernet) PoE Extender. World’s Fastest and Secure, copper Ethernet Extender period, Guaranteed!

Designed & Made in the USA with quality and pride. The American-made Enable-IT 865XC PRO Gigabit Coax PoE Extender over coax uses industry coaxial standard 75 Ohm BNC connectors to make installing in most any environment very easy.

We have engineered most of the technical complexity into automatic line adjustments so the plug and go simplicity on your existing or new wiring is a snap. Ethernet Extension Experts designs and manufactures the Enable-IT 865XC PRO Gigabit Coax PoE Extender kit, along with its entire product line, in the USA that makes us more responsive to customer needs. We take great pride in using the highest quality materials and actual craftsmanship when building our products. We even can customize these at time of order to fit your specific needs as we manufacture in our very own Aerospace Certified Quality AS9100D US West coast facilities.

This Enable-IT 865XC PRO Gigabit Coax PoE Extender over coax is trusted Business Reliable Professional Grade Gigabit PoE Extender without the high cost of fiber or un-secure wireless. Why risk your business to lower quality imported equipment? The value of your network communications should be a protected investment.
Beware of Cheap Chinese “so called Business Use” (not even suitable US Home use) gear that is banned in the US due to proven hidden spyware.

The Enable-IT 865XC PRO kit uses 75 Ohm coaxial wiring for best performance. The kit can support up to 9 865XC CPE units on the same coax wire, and actually can run on just 1 physical wire!

Leverage any existing or new coaxial wiring that is contiguous all the way up to 3,000ft or 915m encrypted and secure, effectively saving you thousands in labor, administration, and security. Think fiber is cheap? Have you ever priced or paid for fiber troubleshooting? Think again.

Single port Gigabit LAN built into each end coupled with industrial strength components to survive harsh temperature extremes delivers superior performance, value and capabilities no other competitor can touch.

Enable-IT 2-Port Gigabit PoE Extension Unit

The Enable-IT™ 828W Outdoor IP68 Rated Gigabit PoE Extension Unit is the world’s 1st and only for 4 years running copper Gigabit solution in the industry today.

This 828W Outdoor IP68 Rated product is a standalone unit to be used with your PoE Injector or PoE Midspan. The standalone 828W Outdoor IP68 Rated can drive incremental Gigabit Ethernet to 800ft (240m). For installing PoE IP cameras, PoE Access Points and remote LAN segments – Nothing is more cost effective or simple to install. The three LAN port design allows for deployment of two separate PoE devices.

The Enable-IT 828W Outdoor IP68 Rated can drive industry standard Gigabit Ethernet and PoE signals to over six times the restricted IEEE standard Ethernet distance when combined in a series of multiple units and uses high power PoE . This cost-effective solution eliminates many of the limitations and high costs for extending LAN cabling today.The 828W Outdoor IP68 Rated Series Solution is a standalone powered Gigabit Ethernet Repeater that doubles the range of your Gigabit Ethernet to an unpowered remote location. This is ideal for installing high powered PoE cameras remotely using only a CAT5e or CAT6 rated 100m cabling. The unit can be configured at time of ordering for disabling PoE output on either or both output ports to enable standard non PoE LAN devices. By default both output ports supply PoE power. Both 2-pair and 4-pair PoE output is standard to support your high powered PoE Devices.

You can also daisy chain (4) 828W Outdoor IP68 Rated units to reach 2,000ft (600m) to power a PoE devices easily.

Enable-IT 2-Port PoE Extender Kit - Firefold

The Enable-IT™ 828P Gigabit PoE Extension Solution is ideal for deploying your PoE Devices like IP PoE Cameras, PoE Sensors and PoE WiFi Access Points. These are the world’s 1st and only Weatherproof copper Gigabit solution in the industry.

This Full Gigabit solution comes with a high powered Enable-IT 360 56V 60W Gigabit PoE Injector. that powers the 828P Gigabit PoE Extender and your PoE devices with 2-pair and 4-pair PoE power. The single PoE injector can even power up the 828P and 3 other 828 units and your PoE device up to 2,000ft (600m) all from one 120 ~ 260V AC outlet – Nothing is more cost effective or simple to install.

The three LAN port design allows for deployment of two separate PoE devices. By default both output ports supply PoE power, however the unit can be configured at time of ordering for disabling PoE output on either or both output ports.

The Enable-IT 828P Gigabit PoE Extender is a very cost-effective solution eliminates many of the limitations and high costs for extending LAN cabling today. For Gigabit throughput make sure to leverage your existing or new CAT5e or better rated cabling

Both 2-pair and 4-pair PoE output is standard to support your high powered PoE Devices.

You can also daisy chain (4) 828 units to reach 2,000ft (600m) to power a PoE devices easily.

Enable-IT 1-Port Outdoor Coax PoE Extender Kit 

The Enable-IT 821CWP Outdoor Coax PoE Extender Kit is the easiest to install encrypted and Secure PoE Extender for any outdoor activities where you need a simple high speed LAN connection.

Designed & Made in the USA with quality and prideful Craftsmanship!
These American-made Enable-IT 821CWP Outdoor Coax PoE Extender use industry LAN standard RJ-45 (8-pin) and BNC Coax connectors to make installing in most any environment very easy. We have engineered most of the technical complexity into automatic line adjustments so the plug and go simplicity on your existing or new wiring is a snap. Ethernet Extension Experts designs and manufactures the 821W Ethernet) Extender kit, along with its entire product line, in the USA that makes us more responsive to customer demanding needs. We use the highest quality materials and craftsmanship.

This is trusted Business Reliable Professional Grade Ethernet Extender without the high cost of fiber or unsecure wireless. Why risk your business to lower quality imported equipment? The value of your network communications should be a protected investment.
Beware of Cheap Chinese “so called Business Use” (not even suitable US Home use) gear that is banned in the US due to discovered hidden spyware.

Leverage existing or new 75 Ohm coaxial wiring that is contiguous all the way up to 2,302 (702m) encrypted and secure, effectively saving you thousands in labor, administration, and security. Think fiber is cheap? Have you ever priced or paid for fiber troubleshooting? Think again.

The Enable-IT 821CWP Outdoor Coax PoE Extender built with industrial strength components to survive harsh temperature extremes delivers superior value and capabilities no other competitor can touch.

Enable-IT 1-Port Outdoor PoE Extender - Firefold

The Enable-IT™ 821WP Outdoor PoE Extender Kit is the fastest encrypted and Secure Ethernet Extender on the planet bar none!

Designed & Made in the USA with quality and prideful Craftsmanship!
These American-made Enable-IT 821WP Outdoor PoE Extender use industry LAN standard RJ-45 (8-pin) connectors to make installing in most any environment very easy. We have engineered most of the technical complexity into automatic line adjustments so the plug and go simplicity on your existing or new wiring is a snap. Ethernet Extension Experts designs and manufactures the 821WP PoE )Power over Ethernet) Extender kit, along with its entire product line, in the USA that makes us more responsive to customer demanding needs. We use the highest quality materials and craftsmanship.

This is trusted Business Reliable Professional Grade Ethernet LAN Extender without the high cost of fiber or unsecure wireless. Why risk your business to lower quality imported equipment? The value of your network communications should be a protected investment.
Beware of Cheap Chinese “so called Business Use” (not even suitable US Home use) gear that is banned in the US due to discovered hidden spyware.

You can leverage existing Telephone wire all the way up to Category rated CAT 7 twisted pair to deploy your extended PoE devices vs expensive fiber that is unable to deliver PoE Power and is susceptible to extreme cold and movement damage.

Leverage existing or new wiring that is contiguous all the way up to 2,302 (702m) encrypted and secure, effectively saving you thousands in labor, administration, and security. Think fiber is cheap? Have you ever priced or paid for fiber troubleshooting? Think again.

PoE Extender coupled with industrial strength components to survive harsh temperature extremes delivers superior value and capabilities no other competitor can touch.

Enable-IT Gigabit Coax Ethernet Extender Kit 4-Port

The Enable-IT 860XSC PRO Black Box Gigabit Coax Ethernet Extender is a Gigabit wire speed throughput Coax Ethernet Extender.
World’s Fastest and Secure, copper Ethernet Extender period, Guaranteed!

Designed & Made in the USA with quality and pride. The American-made Enable-IT 860XSC PRO Black Box Gigabit Coax Ethernet Extender over coax uses industry coaxial standard 75 Ohm BNC connectors to make installing in most any environment very easy. We have engineered most of the technical complexity into automatic line adjustments so the plug and go simplicity on your existing or new wiring is a snap. Ethernet Extension Experts designs and manufactures the Enable-IT 860XSC PRO kit, along with its entire product line, in the USA that makes us more responsive to customer needs.We take great pride in using the highest quality materials and actual craftsmanship when building our products. We even can customize these at time of order to fit your specific needs as we manufacture in our very own Aerospace Certified Quality AS9100D US West coast facilities.

This Enable-IT 860XSC PRO Black Box Gigabit Coax Ethernet Extender over coax is trusted Business Reliable Professional Grade Gigabit Coax Ethernet Extender without the high cost of fiber or un-secure wireless. Why risk your business to lower quality imported equipment? The value of your network communications should be a protected investment.
Beware of Cheap Chinese “so called Business Use” (not even suitable US Home use) gear that is banned in the US due to proven hidden spyware.

The Enable-IT 860XSC PRO kit uses 75 Ohm coaxial wiring for best performance.
The 860XSC PRO Gigabit Coax Ethernet Extender can support up to 9 860XC CPE units on the same coax wire, and actually can run on just 1 physical wire!

Leverage any existing or new coax wiring that is contiguous all the way up to 3,000ft or 915m encrypted and secure, effectively saving you thousands in labor, administration, and security. Think fiber is cheap? Have you ever priced or paid for fiber troubleshooting? Think again.

Quad port Gigabit LAN switch built into the remote end coupled with industrial strength components to survive harsh temperature extremes delivers superior performance, value and capabilities no other competitor can touch.

Enable-IT Outdoor Coax Ethernet Extender Kit 1-Port

The Enable-IT™ 821WC Outdoor Coax Ethernet Extender Kit is the easiest to install encrypted and Secure Ethernet Extender for any outdoor activities where you need a simple high speed LAN connection.

Designed & Made in the USA with quality and prideful Craftsmanship!
These American-made Enable-IT 821WC Outdoor Coax Ethernet Extender use industry LAN standard RJ-45 (8-pin) connectors to make installing in most any environment very easy. We have engineered most of the technical complexity into automatic line adjustments so the plug and go simplicity on your existing or new wiring is a snap. Ethernet Extension Experts designs and manufactures the 821W Ethernet) Extender kit, along with its entire product line, in the USA that makes us more responsive to customer demanding needs. We use the highest quality materials and craftsmanship.

This is trusted Business Reliable Professional Grade Ethernet Extender without the high cost of fiber or unsecure wireless. Why risk your business to lower quality imported equipment? The value of your network communications should be a protected investment.
Beware of Cheap Chinese “so called Business Use” (not even suitable US Home use) gear that is banned in the US due to discovered hidden spyware.

Leverage existing or new 75 Ohm coaxial wiring that is contiguous all the way up to 2,302 (702m) encrypted and secure, effectively saving you thousands in labor, administration, and security. Think fiber is cheap? Have you ever priced or paid for fiber troubleshooting? Think again.

The Enable-IT 821W Outdoor Coax Ethernet Extender built with industrial strength components to survive harsh temperature extremes delivers superior value and capabilities no other competitor can touch.

Enable-IT Outdoor Ethernet Extender Kit 1-Port

The Enable-IT™ 821W Outdoor Ethernet Extender Kit is the easiest to install encrypted and Secure Ethernet Extender for any outdoor activities where you need a simple high speed LAN connection.

Designed & Made in the USA with quality and prideful Craftsmanship!
These American-made Enable-IT 821W Outdoor Ethernet Extender use industry LAN standard RJ-45 (8-pin) connectors to make installing in most any environment very easy. We have engineered most of the technical complexity into automatic line adjustments so the plug and go simplicity on your existing or new wiring is a snap. Ethernet Extension Experts designs and manufactures the 821W Ethernet) Extender kit, along with its entire product line, in the USA that makes us more responsive to customer demanding needs. We use the highest quality materials and craftsmanship.

This is trusted Business Reliable Professional Grade Ethernet Extender without the high cost of fiber or unsecure wireless. Why risk your business to lower quality imported equipment? The value of your network communications should be a protected investment.
Beware of Cheap Chinese “so called Business Use” (not even suitable US Home use) gear that is banned in the US due to discovered hidden spyware.

You can leverage existing Telephone wire all the way up to Category rated CAT 7 twisted pair to deploy your extended PoE devices vs expensive fiber that is unable to deliver PoE Power and is susceptible to extreme cold and movement damage.

Leverage existing or new wiring that is contiguous all the way up to 2,302 (702m) encrypted and secure, effectively saving you thousands in labor, administration, and security. Think fiber is cheap? Have you ever priced or paid for fiber troubleshooting? Think again.

The Enable-IT 821W Outdoor Ethernet Extender built with industrial strength components to survive harsh temperature extremes delivers superior value and capabilities no other competitor can touch.

The DSA540A Sperry Instruments Snap-Around clamp meter is a 10 function, 26 range auto-ranging unit engineered to measure up to 400A AC/DC current, 600V AC/DC voltage, 40 Mohm resistance, frequency, capacitance, diode test and continuity. Similar to digital multimeters, clamp meters offer a large range of functions and include LCD screens to display results but they offer the additional unique ability to measure current without having to contact live conductors. This unit features a data hold and relative measurement to maintain the reading on the liquid crystal display and auto power-off functionality to extend battery life with a low batter indicator to ensure you won't get incorrect readings due to low batteries. Audible beeper permits easy continuity check. We consider safety first; this instrument has been designed and tested and certified to cETLus with CAT II t 600 V and CAT III 300V ratings.

Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal; the condition of electrical installations can be established when contractors use test equipment. Gardner Bender is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer. The PSI8031 verifies proper wiring and connection in 3-phase motor applications.

This heavy-duty, multi-function tool is a must-have for installations and troubleshooting with its ability to indicate voltage levels, test continuity and allow non-contact AC voltage detection. The Sperry Instruments VS61000 Volt Check Voltage Continuity Tester Smart Meter automatically turns on and adjusts to the required application without needing to adjust any dials. The integrated Circuit Alert technology for non-contact AC voltage detection uses the only button found on the test unit. Magnets molded into the back of the unit hold the tester in place while you use the leads. The versatility of this tester, combined with the 10-foot drop rating and 250-pound crush rating, make it one of the most durable, accurate and safe electrical probes on the market today. CAT IV 600V/CAT III 1000 V rated. Limited-lifetime warranty included for extra performance assurance.

Voltage Test Kit VD6504 & GFI6302

Sperry Instruments Crimp-n-Test RJ-45 & RJ-11 Crimping Tool

Cut, strip, terminate and test with this combination modular crimper and cable tester. The heat treated steel frame provides tool durability with RJ-45 and RJ-11 crimp stations. Impact resistant handles with protective rubber overmold comfort grips provide high leverage and impact durability. Test cables terminated with 4, 6 or 8 pin connectors or test in-wall LAN wiring . Built-in tester for continuity, opens, shorts, reversals, and miswires. Ability to test male to male network LAN cables or room to room in-wall network cables. Be immediately confident that your crimps are correct or debug quickly and easily identify faults. Includes a remote that snaps securely into the base of the handle for storage and transportation.

Heavy-duty voltage and continuity tester designed for any number of job site applications. Sperry Instruments unique design allows for convenient single hand testing of outlets when the probes are secured side-by-side on the tester housing. Just insert the probes into the outlet and if voltage is present the neon indicator(s) will glow.

Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal; the condition of electrical installations can be established when contractors use test equipment. Gardner Bender is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer. This convenient pocket size probe allows checking of voltage potential with attached test leads/probes and patented snap-in probe storage preset to standard wall outlet spacing.

Like digital multi-meters, clamp meters have a large range of functions and include LCD screens to display results. Unlike their DMM counterparts, clamp meters have the unique ability to measure current without having to contact live conductors. Engineered to exceed the expectations of the professional electrician, the DSA2009TRMS features True RMS circuitry and measurement of up to 2000 Amp AC/DC. Features low pass filtering, Inrush current, oscilloscope output and a backlit display with bar graph to meet the toughest jobs head on. CAT IV 600-Volt rated with a lifetime warranty to ensure safety and reliability in the field.

Safety is the number one priority on any job site. Sperry Instrument's testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. The condition of electrical installations can be established when contractors use test equipment. Any test unit that can be used to measure or review an application without coming in contact with a live conductor is a necessity. Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal; the condition of electrical installations can be established when contractors use test equipment. Sperry Instrument is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer.

CIRCUIT BREAKER FINDER KIT

The Breaker Finder Circuit Breaker Locator traces circuits to detect appropriate breaker. It quickly and easily identifies correct breaker or fuse protecting a specific electrical circuit. It is designed for operation at 120V AC, 60Hz.

Safety is the number one priority on any job site. Sperry Instruments' testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal; the condition of electrical installations can be established when contractors use test equipment. Any test unit that can be used to measure or review an application without coming in contact with a live conductor is a necessity. The IR Thermometers allow for critical temperature measurements to be taken without having to touch an energized circuit. The D:S ratio or (Distance to Spot Ratio), is a rating used to state the distance, in feet, that the test unit should be from the target in order to measure a one foot diameter section. In other words, a 12:1 D:S Ratio means that from twelve feet away, the test unit is measuring a one foot diameter section of the target.

Sperry makes the job of locating electrical circuits (AC circuits of 110-125 volts) quick and easy. Turning off the correct breaker is critical when considering work on an electrical circuit and can take an excessive amount of time using "trial and error" until you hit the right one. This Circuit Breaker Finder features a sending unit which you plug into a receptacle in the room where you want to work and a receiving unit which you use to test the breakers to correctly identify the right breaker every time. The receiver features both a visual flashing light and an audible beeping to alert you when the correct breaker is identified. The package includes a user manual and a 9 volt battery required for the receiver unit. A video demonstrating how to correctly use the product is located at www.sperryinstruments.com for easy reference. Unit includes a 1 year warranty.

Engineered to exceed the expectations of the professional electrician the DSA1020TRMS is a 10 Function/ 27 range Digital Snap-Around Clamp Meter with precise True RMS circuitry and a 1000 Amp non-contact current reading. Designed with integrated non-contact voltage detection and a Min/Max data hold capable function which allows you to hold either minimum reading or maximum reading on the display. This Auto Ranging unit features 10 functions and 27 ranges measuring AC/DC V up to 600 V, non-contact AC voltage 80 - 600V and AC/DC Current up to 1000A. Able to test continuity, resistance, True RMS, frequency, and temperature (probe type) this unit features a backlit LCD display ideal for low light applications and an auto power of functionality to save battery life. cULus listed and CE approved with a CAT IV rating to 600V and includes a limited lifetime warranty. Unit ships with a convenient carrying case and 2 AAA batteries (required for use).

CAT5e Patch Cable Din Space Unshielded RJ45 with Boots

DINSpace Unshielded CAT 5e Patch Cable, RJ45-RJ45 with Boots, Blue

DINSpace SNAP Splice Pigtail with 1ea. Singlemode ST Simplex Adapter, 3ft

DINSpace SNAP Splice Pigtail with 1ea. Singlemode SC Simplex Adapter, 3ft

DINSpace SNAP Splice Pigtail with 1ea. Singlemode LC Simplex Adapter, 3ft

DINSpace SNAP Splice Pigtail with 1ea. 50 Micron (OM3) Multimode SC Simplex Adapter, 3ft

DINSpace SNAP Splice Pigtail with 1ea. 62.5 Multimode SC Simplex Adapter, 3ft