Lifetime Warranty

Coax Keystone Jack F81 Female to Female Coupler

This is an F81 female to the female coaxial coupler. It features an F connector for installing a coaxial cable that is commonly used with cable and satellite television, CCTV, and high-speed Internet.

The outer housing is a molded plastic keystone insert that can be installed into a standard wall plate or blank patch panel.

Please note: Slight hue variations may occur between keystone jacks and the matching keystone wall plates. If you need to ensure there is no variation, please contact customer service at 704-979-7100 before placing your order.

USB Extension Cable USB 3.0 Type A Male to Female

Closing the Distance

The USB cable you have not quite long enough for the task at hand? Printer not close enough? No problem! Grab one of these USB extension cables and you’re all set.

Don’t stop your consideration of this product at our printer example! These USB cable extensions can be used with a variety of products. Game controller for your PS3 not long enough? Here you go. Wired USB keyboard or mouse just not far enough for you? Tada! The possibilities are endless when you sit back and think about all of the products available on the market that use USB.

Extend Away

Each of our USB active extension cables are rated for USB 3.0, able to handle Superspeed 5Gbps transmission with no issues at all. These cables are backwards compatible with previous levels of USB. Each USB cable extension delivers more power with 28 gauge, double-shielded conductors.

The Enhanced Performance You Need When It Couldn't Be More Important

Anyone who has worked with networking equipment for any appreciable length of time can tell you that more often than not, the ongoing success of a network has less to do with any one major decision and is more about a series of smaller and more important ones. One of these has to do with the quality of the cabling that you use - something that you cannot afford to view as an afterthought any longer.

When you demand performance, flexibility and ingenuity all rolled into one convenient product, what you're really looking for is the Cat5E Patch Cable from FireFold. Our unique brand of Category 5 Enhanced snagless Ethernet cables aren't just designed to meet TIA/EIA-586 standards - with performance at up to 350 MHz in most cases, they often exceed them in the way that you can depend on.

For many, the best part of our cables is that they're already fully backwards compatible with any 10BaseT or 100BaseT networking cards and hubs that you may happen to have. This means that you can upgrade to our superior quality cables for all of the performance benefits they bring with them WITHOUT having to switch out your older equipment as a result.

But even going beyond that, our Cat5E Patch Cable options are fully constructed from four 24 AWG unshielded twisted pure copper wire strands in a sleek, convenient CMR rated PVC jacket. This means that they're absolutely approved for nearly any general indoor application that you may be working with.

The molded strain relief boot itself is also attached right at the connector, which will prevent snags and other events that could damage your cable either during installation or while performing routine troubleshooting and maintenance later on. Not only that, but our RJ-45 connectors all have 50 micron gold plated contacts - something that virtually guarantees that corrosion is NOT something you have to worry about any longer.

As is true with all of our other patch cable products, our Cat5E Ethernet Patch Cables also come complete with a lifetime warranty, a full 60 day money back guarantee and same day shipping in most situations. You'll also have the full might of our industry leading customer support team to turn to in the event that you should run into any issues.

Male to Male Coax Coupler 

For connecting two female coax ends together, you can’t go wrong with the COAX-DUALMALE. This professional coupler features two screw-on F-type male coax jacks. It can be used with either RG59 or RG6 standard or quad-shield cables. These cords are most often run for television installations for cable, satellite, and even antenna applications. The machined threads provide secure contacts and maximum conductivity. When the cables are firmly twisted into place, this coupler can dependably hold the connection despite any pulling, tugging, or pressure. Rotating hex collars and a textured neck make it easy to grip this tiny adapter for installation.

These coax couplers can be used with any of FireFold’s RG59 or RG6 coax cables, splitters, or adapters for customized audio/video solutions. In most cases, coax cables can be run incredible distances, so feel free to extend without worries. It doesn’t matter to us how long you plan for your cables to be joined, either. You can still enjoy our picture-perfect match of low prices and high performance. With our signature lifetime warranty, you can expect this coupler to create quality connections for as long as you both shall live.

DVI to HDMI Adapter DVI Male to HDMI Female

The DVIM-HDMIF-ADPT is an HDMI female to a dual-link DVI male connector. This is a bidirectional adapter and will work from DVI sources to HDMI displays or from HDMI sources to DVI displays. It is often used with an HDMI cable to carry signal from a computer’s video card to an external monitor or display. Although there are many other possible uses, this adapter is compatible with DVI-D signals only. Switching from analog signals to HDMI always requires a converter. DVI is also a video-only format. Although HDMI can carry audio, this adapter will not.

As with any other FireFold product big or small, you can expect the highest quality for an incredible value. Gold-plated contacts resist corrosion and a set of thumbscrew holes ensure a snug connection every time. Designed for professionals, the tough molded plastic casing stands up to the wear, tear, and stress of constant usage. This adapter also comes with FireFold’s Signature Lifetime Warranty which ensures your purchase is free from manufacturer defects for as long as you own it.

1U 19 Inch Patch Panel Support Bar 

This is a 19" cable support bar made from durable steel with a black powder coat finish. Attach to the rear of any standard 19" rack mount patch panel. The cables that are punched down to the rear of the patch panel will now be organized neatly with all the strain relief needed, keeping away intermittent connections caused by rear cable movement.

Cat6 Keystone Jack For Networking Solutions - Coupler

The Cat6 Keystone Jack

The Cat6 Jack is the most widely used keystone jack in today’s market for networking wall plate solutions or patch panels. Each Cat6 Jack provided by FireFold provides outstanding performance, exceeding the ANSI/TIA/EIA-568-B.2 industry standard. This makes these keystone jacks perfect for use in today’s high-speed networks while remaining completely backward compatible with all previous standards.

These Cat6 Jacks fit into RJ45 wall plates, patch panels, or any standard RJ45 slot. They are perfect for connecting two patch cords without any punching down. Great for an application where you would be switching around wires on both sides of the keystone location.

Meeting All Requirements

Each RJ45 keystone jack is flame retardant and each is UL verified for quality and safety. These RJ45 jacks are 14.5mm wide by 16mm high and are easily able to fit in most standard keystone jack wall plates. Plus, they come in a variety of colors - both to help you keep your cables organized but to also allow you to match your keystone easily to whatever colors you are planning.

You can find a variety of keystone wallplates with us, which allow you to easily customize what you put into each wall plate in your home. You could combine one of these with an HDMI keystone, or even an RJ11 keystone, with just an easy snapping of each keystone into their place.

Please note: Slight hue variations may occur between keystone jacks and the matching keystone wall plates. If you need to ensure there is no variation, please contact customer service at 704-979-7100 before placing your order.

Cat5E Ethernet Patch Cable Snagless in Black, Shielded

350 MHz FTP Cords With Performance to Spare

When you're putting together a network, you can't just pick things like patch cables based on your needs as they exist today. Getting the network up and running is one thing. Making it easy to maintain and support that network over time is something else entirely, which is why the solutions you choose in terms of even something (seemingly) simple like patch cables could not be more critical to what you're doing.

When you need a solution that provides both the quality and the versatility necessary to guarantee the top performance in all of today's high speed networks, you need the Shielded Cat5E Patch Cable from FireFold whether you realize it or not. This 350 MHz FTP cord, available in lengths from 0.5 feet to 200 feet for you to choose from depending on your needs, come with a wide array of different features that make it the option to beat across the industry.

For starters, these cables feature a very unique kind of enhanced electrical performance - perfect for supporting the bandwidth intensive applications of today in a way that also prepares your network to help tackle the challenges of tomorrow. Network architects everywhere can also rejoice: these cables are also fully backwards compatible with any 10BaseT or 100BaseT network cards and hubs that you may already be using.

Likewise, these cables are constructed of no less than for totally foiled twisted pairs of 26 AWG stranded copper, complete with a rugged and ultra durable PVC jacket. The FTP wires themselves put you in an excellent position to both eliminate cross-talk and help boost signal quality, all while going a long way towards supporting traditional data transmission as well. Last but not least, our Shielded Cat5E Patch Cable also features RJ45 connectors with 50 micron gold plated contacts - an invaluable feature that helps to guard against corrosion, degradation and absolutely everything in between.

As is true with all patch cable purchases from FireFold, these Cat5E Shielded Ethernet Patch Cables come complete with our industry leading lifetime warranty and are backed by the full might of our incredible customer support team. Not only that but you can also enjoy same day shipping on most orders, fast and easy returns (in the unfortunate event that the need should arise) and much, much more.

Flat Cat6 Patch Cable RJ45 Connectors

FireFold’s Category 6 (CAT6 Ethernet cable) Ethernet cables are made to be at market standards, meeting and exceeding the TIA/EIA-568 standard. Each of these Cat6 patch cables are able to perform up to 550 MHz with a 50 micron gold plated contact RJ45 connector at either end of the cable to help against corrosion.

The CAT6 Ethernet cables are constructed from four flat 32 AWG stranded pair pure copper wire strands in a PVC cable casing. This means that the cables are more flexible and more readily usable for patch cables.

The PVC jacket that wraps around these cables is CM type, which means it is good for general use. The jacket itself is flatter than most, making it easier to run under carpeting or around baseboards. A molded strain relief boot rests upon each connector, helping prevent snags and damage to your cable.

CAT6 Ethernet cables are backwards compatible with any 10BaseT or 100BaseT network cards and hubs, allowing you to buy our cables and not have to switch out your older equipment. This simplifies nearly any network setup. Please note, however, that you must upgrade your equipment in order to take full advantage of the higher frequency and transfer rates.

HDMI Keystone Jack Female to Female Coupler

This High Speed HDMI keystone jack works as a coupler, with a female HDMI jack on either side. It has a white, molded plastic covering.

Keystone jacks are very easy to install, indeed you might rightly say that it's a snap. With an HDMI port on either end you will be able to organize your HDMI connection by having it run through a wall. Removing this insert is also easy and allows you to move your HDMI wall connection to other locations if so desired.

By coupling your in-wall cable to an outside source, you won't be reducing the signature HDMI quality. 1080p picture and great sound are still to be had with the ease of use that comes with this product.

Wall plates don't only come with one jack. With this product you will have the option to install it into a multiple jacked wall plate that will organize most of your cables into one central location in the wall.

350 MHz FTP Cords With Performance to Spare

When you're putting together a network, you can't just pick things like patch cables based on your needs as they exist today. Getting the network up and running is one thing. Making it easy to maintain and support that network over time is something else entirely, which is why the solutions you choose in terms of even something (seemingly) simple like patch cables could not be more critical to what you're doing.

When you need a solution that provides both the quality and the versatility necessary to guarantee the top performance in all of today's high speed networks, you need the Shielded Cat5E Patch Cable from FireFold whether you realize it or not. This 350 MHz FTP cord, available in lengths from 0.5 feet to 200 feet for you to choose from depending on your needs, come with a wide array of different features that make it the option to beat across the industry.

For starters, these cables feature a very unique kind of enhanced electrical performance - perfect for supporting the bandwidth intensive applications of today in a way that also prepares your network to help tackle the challenges of tomorrow. Network architects everywhere can also rejoice: these cables are also fully backwards compatible with any 10BaseT or 100BaseT network cards and hubs that you may already be using.

Likewise, these cables are constructed of no less than for totally foiled twisted pairs of 26 AWG stranded copper, complete with a rugged and ultra durable PVC jacket. The FTP wires themselves put you in an excellent position to both eliminate cross-talk and help boost signal quality, all while going a long way towards supporting traditional data transmission as well. Last but not least, our Shielded Cat5E Patch Cable also features RJ45 connectors with 50 micron gold plated contacts - an invaluable feature that helps to guard against corrosion, degradation and absolutely everything in between.

As is true with all patch cable purchases from FireFold, these Cat5E Shielded Ethernet Patch Cables come complete with our industry leading lifetime warranty and are backed by the full might of our incredible customer support team. Not only that but you can also enjoy same day shipping on most orders, fast and easy returns (in the unfortunate event that the need should arise) and much, much more.

Cat6 Slim Ethernet Patch Cable, Blue

FireFold's Cat6 slim patch cable uses 28 AWG 4 pair UTP Ethernet wire and is designed to optimize the space in telecommunication room and data center. Cable diameter is mere 3mm (0.12") compared to standard 5.8mm (0.23") and provides 48% reduction in diameter and 73% reduction in space. Small size means cables are easier to manage, higher-density patching is more feasible, and valuable rack space can be used for equipment and ventilation, rather than cable management. It is also suitable for residential installation to keep cabling around the cable/DSL modem and router low profile. Our slim patch cable comes with neat looking clear strain relief boots.

Cat6A Shielded Patch 26AWG 10G Cable

FireFold’s Category 6 (CAT6A Ethernet Cable) shielded Ethernet cables are made to meet market standards and assure the best performance in today’s high-speed networks. CAT6a shielded cables are backwards compatible with any 10BaseT or 100BaseT network cards and hubs, allowing you to change out your old cables for these without having to change out your equipment.

Cat6a is the latest standard that can run up to a 600 MHz frequency, transferring up to 10-Gigabits through appropriate equipment. The Cat6a shielded cables still hold a 50-micron gold plated contact within the RJ45 connectors, just as all of FireFold’s Ethernet cables to help prevent corrosion. A boot rests upon each connector, helping prevent snags and damage to your cable.

These CAT6a shielded cables are constructed from four 26 AWG shielded twisted pair pure copper wire strands in a PVC cable casing. The SSTP (screen shielded twisted pair) wires of these Cat6a patch cables are twisted together to reduce cross talk and the individual pairs have shielding around them. The pairs as a unit have an additional braided screen around them.

With a variety of lengths available, you can get the perfect Cat6a patch cable to meet your needs and get your network setup with ease. You can run lengths of up to 328 feet with these cables.

Mini HDMI to HDMI Cable High Speed

Use this item to connect to a display or computer. HDMI is the only cable interface in consumer electronics that can carry uncompressed high definition video and multi channel audio in all high definition formats: 720p, 1080i, 1080p, and 4Kx2K. It provides high definition digital video and digital audio via a single cable allowing for a clutter free entertainment console.

High Speed

This cable is clocked at 10.2 Gbit/s and has a bandwidth of 340 MHz. It is among the fastest Audio / Video cables on the market...at a 10th the Cost!

3D Ready

Perfect for any 3D BluRay or TV, this cable supports the latest technology in 3D Compatibility.

32 AWG

For this particular cable, the wire gauge is 30 AWG.

24k Gold Plated Contacts

To resist corrosion and degradation each end of the HDMI cable has been coated in 24k Gold, this ensures perfect signal transmission, forever.

LC-LC Singlemode OS2 Duplex 9/125 Fiber Patch Cable

Single-Mode - In optical fiber technology, single mode fiber is an optical fiber that is designed for the transmission of a single ray or mode of light as a carrier and is used for long-distance signal transmission. For short distances, multimode fiber is used.

• Used to connect patch panels and/or network devices that utilize LC to LC style connectors and require 9/125 Single mode cabling
• 100% tested
• Test report included in each cable
• 1/2 Markers easily identify the TX and RX connector on each end of the assembly

Cat6 Shielded Ethernet Patch Cable, Snagless Boot, Red

Quality You Can Depend On And Performance That Can't Be Beaten

Regardless of the type of network you're trying to construct - whether it's for use in a home or in a professional environment - it's safe to say that the stakes could not be higher. The Internet has become a ubiquitous part of our lives over the last decade, which means it's become a critical one, too. So much of success in terms of network design and infrastructure support ultimately comes down to the quality of the cables and other accessories that you're using, which is a major reason why our shielded Cat6 Ethernet cable from FireFold is one of the most important purchases you can make at such a pivotal time.

Though our shielded Cat6 patch cable may seem simple, there's a lot hiding beneath that attractive and durable jacket. For starters, all of our cables are UL certified - meaning they don't just meet, but exceed, TIA/EIA standards. Likewise, our complete range of SSTP patch cables are obviously fully Cat6 compliant with not one but two layers of shielding.

So not only do you get a braided overall screen just beneath the sheath, but each individual pair also has rugged foil screening of its own. This unique shielding method goes a long way towards ruling out interference from a wide range of external sources, making these cables perfect for nearly any application that you might have in mind.

As is true with all of our Cat6 cables, these shielded Cat 6 patch cable options are fully terminated with RJ45 plugs that themselves feature 50 microns of gold. Thanks to the unique way that the cables are molded, you also don't have to worry about snags, tears and other issues during installation or ongoing maintenance in the future. This construction also provides some much needed strain relief for the cable, allowing it to dutifully stand the test of time for years to come.

All of our patch cables from FireFold come complete with a full 60 day money back guarantee, fast and easy returns (should you need to do so, which is rare), are backed by an industry leading customer support team and are available to ship TODAY in most situations. Truly, it doesn't get much better than that.

CAT5e Ethernet Patch Cable Snagless in Purple, RJ45, M/M

The Enhanced Performance You Need When It Couldn't Be More Important

Anyone who has worked with networking equipment for any appreciable length of time can tell you that more often than not, the ongoing success of a network has less to do with any one major decision and is more about a series of smaller and more important ones. One of these has to do with the quality of the cabling that you use - something that you cannot afford to view as an afterthought any longer.

When you demand performance, flexibility and ingenuity all rolled into one convenient product, what you're really looking for is the Cat5E Patch Cable from FireFold. Our unique brand of Category 5 Enhanced snagless Ethernet cables aren't just designed to meet TIA/EIA-586 standards - with performance at up to 350 MHz in most cases, they often exceed them in the way that you can depend on.

For many, the best part of our cables is that they're already fully backwards compatible with any 10BaseT or 100BaseT networking cards and hubs that you may happen to have. This means that you can upgrade to our superior quality cables for all of the performance benefits they bring with them WITHOUT having to switch out your older equipment as a result.

But even going beyond that, our Cat5E Patch Cable options are fully constructed from four 24 AWG unshielded twisted pure copper wire strands in a sleek, convenient CMR rated PVC jacket. This means that they're absolutely approved for nearly any general indoor application that you may be working with.

The molded strain relief boot itself is also attached right at the connector, which will prevent snags and other events that could damage your cable either during installation or while performing routine troubleshooting and maintenance later on. Not only that, but our RJ-45 connectors all have 50 micron gold plated contacts - something that virtually guarantees that corrosion is NOT something you have to worry about any longer.

As is true with all of our other patch cable products, our Cat5E Ethernet Patch Cables also come complete with a lifetime warranty, a full 60 day money back guarantee and same day shipping in most situations. You'll also have the full might of our industry leading customer support team to turn to in the event that you should run into any issues.

Female to Female Coax Coupler 

For connecting two male coax ends together, you can’t go wrong with the COAX-COUP. This professional coupler features two screw-on F-type female coax jacks. It can be used with either RG59 or RG6 standard or quad-shield cables. These are most often run for television installations for cable, satellite, and even antenna applications. The machined threads provide secure contacts and maximum conductivity. When the cables are firmly twisted into place, this coupler can dependably hold the connection despite any pulling, tugging, or pressure. A solid hex collar makes it easy to grip this tiny adapter for installation and allows it to be used with a washer in an empty hex socket wall plate.

These coax couplers can be used with any of FireFold’s RG59 or RG6 coax cables, splitters, or adapters for customized audio/video solutions. In most cases, coax cables can be run incredible distances, so feel free to extend without worries. It doesn’t matter to us how long you plan for your cables to be joined, either. You can still enjoy our picture-perfect match of low prices and high performance. With our signature lifetime warranty, you can expect this coupler to create quality connections for as long as you both shall live.

USB 2.0 Cable Type A Male to Male

Connecting Together

There are many USB cables out on the market. The one you are looking at right now is the A to A USB cable. This is not a standard cable that you see used for a variety of tasks but used for a specific few. This USB cable typically will be used to hook up the handful of devices, that have this connection on them, to a computer or other device. Since both ends are matching flat male adapters, this is not a connection used for extending the length of your run.

One should also keep in mind that USB A to A cables are typically not intended for transferring data between two computers. This can actually short circuit the cable in many cases and cause damage to either computer, if not possibly both, that are being hooked up to each other. This is a common misconception and we always like to make sure our customers are informed fully about their products before purchase.

Specifics

Each of our USB A to A cables is individually packaged for durability. They are flexible, 28 AWG cords that are not too stiff. Plus, with their sturdy A to A connectors on either end, they are extremely durable for many connect and disconnect situations. The specific cable you are looking at now is three feet in length and comes in the color of ivory (white). Plus, it is rated for USB 2.0 - capable of transferring speeds of up to 480 Mbps with ease. With each of our A to A cords being backwards compatible, you can still use these on USB 1.1 systems just as easily as 2.0 systems.

With FireFold’s signature lifetime warranty, you really cannot go wrong with purchasing one or a few of these cables for your project. At the price we provide, your wallet will rejoice in the money you save and you will be happy knowing that you can come to us if you ever have a manufacturer issue that needs to be resolved.

Let’s Get Digital

Digital Visual Interface (DVI) debuted in 1999 as an industry standard for the new wave of digital video signals and it continues to be fairly common today. It is most often found on desktop PC computers and monitors although it can be found on flat panel televisions, projectors, and other devices. There are several versions of DVI available now including DVI-D (digital), DVI-A (analog), and DVI-I (integrated). Single-link and dual-link cords can be found. Dual-link cables are capable of faster refresh rates and greater resolutions. DVI is a video-only signal and will not transmit audio.

Heavy Duty DVI

FireFold’s DVID-BLK is a DVI-D 24-pin male to male dual-link cable. This cord features 28 AWG twisted copper conductors and gold-plated contacts for high-quality signal transmission and lasting corrosion resistance. The thick jacket and molded strain-relief heads give it a leg up over the competition when it comes to reliability and durability as well. To make the most secure connection possible even in the tightest of spaces, these cables also include threaded locking screws with a textured grip for easy installation.

With a maximum resolution of 2560x1600, this cable can support some of the most advanced displays on the market. By using a simple adapter, this DVI cable can be converted for use with HDMI-enabled televisions as well. Ferrite beads on either end of the cord help filter out electromagnetic and radio frequency interference, reducing noise and increasing signal purity for only the best picture quality. It is capable of transmission rates of up to 9.9Gbps, and it is compatible with both PC and Mac computers. This professional-grade cable is backed by FireFold’s signature lifetime warranty.

RCA Keystone Jack White Insert 

This is a White - Yellow RCA Keystone Insert. It has a molded plastic covering with an RCA port that passes through a signal. This product will install quickly and easily into a wall plate or patch panel and provide a convenient port to access in-wall cable.

Slim Line Standard HDMI Pigtail Wall Plate

The standard HDMI wall plate with pigtail is a white decor style rectangular covering for a wall. It has 2 HDMI ports connected by a short cable. The port contacts are gold plated to resist corrosion and degradation. With a screw at the top and another at the bottom, this wall plate is installed the standard way.

This wall plate will help you organize and extend your HDMI devices. Running cables through the wall is one of the most common ways installers create their gorgeous and functional setups. There is one problem with most wall plates, however, and that is the angle of their HDMI port on the back. A pass-thru port will cause wear and tear to the connector of your HDMI cable if not angled in a way to reduce stress, the pigtail will remove this concern. With a flexible pigtail, you can angle your cable in a way that best serves your needs. Just like other HDMI wall plates, crystal clear, high-resolution signals are supported and audio and video is transmitted.

Cat6A Slim Ethernet Patch Cable

The FireFold CAT6A Slim Line Ethernet cable is the solution to reduce congestion in high-density CAT6A Network environments, such as data centers,telecommunication, and server rooms. With the Cat6A Slim Line cable, you can fit more cables in the same space. The slim cable diameter is almost half that of a standard CAT6A cable.

Cat6 Shielded Ethernet Patch Cable, Snagless Boot, White

Quality You Can Depend on On And Performance That Can't Be Beat

Regardless of the type of network, you're trying to construct - whether it's for use in a home or in a professional environment - it's safe to say that the stakes could not be higher. The Internet has become a ubiquitous part of our lives over the last decade, which means it's become a critical one, too. So much success in terms of network design and infrastructure support ultimately comes down to the quality of the cables and other accessories that you're using, which is a major reason why our shielded Cat6

Ethernet cable from FireFold is one of the most important purchases you can make at such a pivotal time.

Though our shielded Cat6 patch cable may seem simple, there's a lot hiding beneath that attractive and durable jacket. For starters, all of our cables are UL certified - meaning they don't just meet, but exceed, TIA/EIA standards. Likewise, our complete range of SSTP patch cables is obviously fully Cat6 compliant with not one but two layers of shielding.

So not only do you get a braided overall screen just beneath the sheath, but each individual pair also has rugged foil screening of its own. This unique shielding method goes a long way towards ruling out interference from a wide range of external sources, making these cables perfect for nearly any application that you might have in mind.

As is true with all of our Cat6 cables, these shielded Cat 6 patch cable options are fully terminated with RJ45 plugs that themselves feature 50 microns of gold. Thanks to the unique way that the cables are molded, you also don't have to worry about snags, tears, and other issues during installation or ongoing maintenance in the future. This construction also provides some much-needed strain relief for the cable, allowing it to dutifully stand the test of time for years to come.

All of our patch cables from FireFold come complete with a full 60-day money-back guarantee, fast and easy returns (should you need to do so, which is rare), are backed by an industry-leading customer support team, and are available to ship TODAY in most situations. Truly, it doesn't get much better than that.

Cat6 Slim Ethernet Patch Cable, Black

FireFold's Cat6 slim patch cable uses 28 AWG 4 pair UTP Ethernet wire and is designed to optimize the space in the telecommunication room and data center. Cable diameter is mere 3mm (0.12") compared to standard 5.8mm (0.23") and provides 48% reduction in diameter and 73% reduction in space. The small size means cables are easier to manage, higher-density patching is more feasible, and valuable rack space can be used for equipment and ventilation, rather than cable management. It is also suitable for residential installation to keep cabling around the cable/DSL modem and router low profile. Our slim patch cable comes with neat-looking clear strain relief boots.

Cat6 Shielded Ethernet Patch Cable, Snagless Boot, Green

Quality You Can Depend On And Performance That Can't Be Beat

Regardless of the type of network you're trying to construct - whether it's for use in a home or in a professional environment - it's safe to say that the stakes could not be higher. The Internet has become a ubiquitous part of our lives over the last decade, which means it's become a critical one, too. So much of success in terms of network design and infrastructure support ultimately comes down to the quality of the cables and other accessories that you're using, which is a major reason why our shielded Cat6 Ethernet cable from FireFold is one of the most important purchases you can make at such a pivotal time.

Though our shielded Cat6 patch cable may seem simple, there's a lot hiding beneath that attractive and durable jacket. For starters, all of our cables are UL certified - meaning they don't just meet, but exceed, TIA/EIA standards. Likewise, our complete range of SSTP patch cables are obviously fully Cat6 compliant with not one but two layers of shielding.

So not only do you get a braided overall screen just beneath the sheath, but each individual pair also has rugged foil screening of its own. This unique shielding method goes a long way towards ruling out interference from a wide range of external sources, making these cables perfect for nearly any application that you might have in mind.

As is true with all of our Cat6 cables, these shielded Cat 6 patch cable options are fully terminated with RJ45 plugs that themselves feature 50 microns of gold. Thanks to the unique way that the cables are molded, you also don't have to worry about snags, tears and other issues during installation or ongoing maintenance in the future. This construction also provides some much needed strain relief for the cable, allowing it to dutifully stand the test of time for years to come.

All of our patch cables from FireFold come complete with a full 60 day money back guarantee, fast and easy returns (should you need to do so, which is rare), are backed by an industry leading customer support team and are available to ship TODAY in most situations. Truly, it doesn't get much better than that.

RJ11 Plug for Stranded Flat Wire

This is an RJ11 Plug for Stranded Flat Wire. These are designed for voice applications and most commonly used to terminate telephone lines. This connector contains gold-plated contacts and uses the 6 Position 4 Conductor wiring standard.

DVI Female to Male HDMI Adapter

The DVIF-HDMIM-ADPT is a DVI female to HDMI adapter. This is not a bi-directional adapter and will only work when used to carry a DVI signal from a source to an HDMI display. It is most often used in conjunction with a DVI cable to go from a computer’s video card output to an HDMI television or monitor. Although there are many other possible uses, this adapter is compatible with DVI-I and DVI-D signals only. Switching from analog signals to HDMI always requires a converter. DVI is also a video-only format. Although HDMI can carry audio, this adapter will not.

As with any other FireFold product big or small, you can expect the highest quality for an incredible value. Nickel contacts resist corrosion and a set of thumbscrew holes ensure a snug connection every time. Designed for professionals, the tough molded plastic casing stands up to the wear, tear, and stress of constant usage. This adapter also comes with FireFold’s Signature Lifetime Warranty which ensures your purchase is free from manufacturer defects for as long as you need it.

Monitor Mount Bracket - 13-27 Inch 

This Articulating Monitor Mount supports most 13" to 27" monitors with a capacity of 44 lbs. Built-in leveling adjustment ensures perfect wall positioning. High quality powder-coated finish provides a stylish anti-scratch surface.

3.5mm Stereo Male to RCA Male Adapter Cable 

This is a durable, high-quality adapter cable going from a single 3.5mm male connector to dual (2) RCA male connectors. These adapter cables are ideal for connecting your MP3 player or smartphone to larger speakers or a home audio system. It's simple to use and it's a sturdy cable that is built to last, so it won't snap or break on you. The six-foot length of the cable will come in handy when you need to connect devices that aren't right next to each other. Use this adapter cable in your own home or toss it in your car and bring it along with you to a friend's house. As with all of our products, the price of this adapter is just fantastic. When shopping with FireFold, it's always easy to find the cable you need without spending all your hard-earned money to get it!

USB Type A Female to Female Adapter

Don't make extending your USB reach more complicated than it needs to be!

This simple plug and play adapter allows you to connect two USB cables together to create one long cable.

Each female connector is nickel plated for increased conductivity. The molded PVC jacket provides the perfect surface for gripping.

Composite Cable (3-100ft)
Lights and Sound

FireFold's composite cable consists of a single yellow composite video as well RCA audio. The red and white RCA audio wires transmit left and right stereo sound most often found with composite video. They can be used together or separately. These cables are thin but durable with a PVC jacket that allows a maximum of flexibility, even in the tightest of spaces. Fully molded color-coded connectors allow for easy set-up, and the integrated strain-relief boots add to overall reliability. The use of right angle RCA adapters is still suggested in low-profile television mount installations to avoid stress on the composite ports.

Each RCA connector on this composite A/V cable is factory gold-plated which both increases the signal transmission and resists corrosion over long-term use. The high-quality 75 Ohm copper conductors are both braided and foil-shielded, reducing unwanted noise and interference. Interference is best avoided, because it can cause signal degradation and annoying visual artifacts, especially in lower resolution analog cables like composite video. Each of our 3’ composite cables also comes with the lasting assurance of our signature lifetime warranty.

Cat6A Ethernet Patch Cable

These network cables enable 10-Gigabit data transmission over a 4-connector twisted-pair copper cable, allowing connection distances of up to 100 meters. Current Cat6 cabling systems may only support 10-Gigabit Ethernet over limited distances. The Cat6a draft extends the Cat6 electrical specifications from 250 MHz to 500 MHz. It also proposes a new measurement for Power-Sum Alien Crosstalk to 500 MHz. Alien Crosstalk is a coupled signal in a disturbed pair arising from a signal in a neighboring cable.

Cat6a also utilizes a new generation of connecting hardware that is superior to standard Cat6.

The Cat5e Keystone Jack - FireFold

The Cat5 Jack is the most widely used keystone jack in today’s market for networking wall plate solutions or patch panels. Each Cat5 Jack provided by FireFold provides outstanding performance, exceeding the TIA/EIA 568-B industry standard. This makes these keystone jacks perfect for use in today’s high-speed networks while remaining completely backward compatible with all previous standards.

The Cat5 jack provided by us comes with a standard RJ45 plug on the outside. These ethernet jacks are toolless. The unique toolless design does not require the use of a punch down tool. This can make things substantially faster when having to put many of these RJ45 jacks into place. All of our networking keystone jacks have 568A and 568B color codes on the jacks in addition to the easy trouble free termination.

Meeting All Requirements

Each RJ45 keystone jack is flame retardant and each is UL verified for quality and safety. These RJ45 jacks are 14.5mm wide by 16mm high and are easily able to fit in most standard keystone jack wall plates. Plus, they come in a variety of colors - both to help you keep your cables organized but to also allow you to match your keystone easily to whatever colors you are planning.

You can find a variety of keystone wallplates with us, which allow you to easily customize what you put into each wall plate in your home. You could combine one of these with an HDMI keystone, or even an RJ11 keystone, with just an easy snapping of each keystone into their place.

Please note: Slight hue variations may occur between keystone jacks and the matching keystone wall plates. If you need to ensure there is no variation, please contact customer service at 704-979-7100 before placing your order.

Cat6A Ethernet Patch Cable

These network cables enable 10-Gigabit data transmission over a 4-connector twisted pair copper cable, allowing connection distances of up to 100 meters. Current Cat6 cabling systems may only support 10-Gigabit Ethernet over limited distances. The Cat6a draft extends the Cat6 electrical specifications from 250 MHz to 500 MHz. It also proposes a new measurement for Power-Sum Alien Crosstalk to 500 MHz. Alien Crosstalk is a coupled signal in a disturbed pair arising from a signal in a neighboring cable.

Cat6a also utilizes a new generation of connecting hardware that is superior to standard Cat6.

DisplayPort to HDMI Cable (3-15ft)

DISPLAYPORT MALE TO HDMI MALE CABLE 28AWG

• Compliant with DP1.2 specification.
• Connect a DisplayPort (DP, DP++, DisplayPort++) equipped computer to a HD monitor or projector with HDMI input.
• Support HBR bandwidth and resolutions up to 4Kx2K@30Hz.
• Gold-plated connector provides superior transmission, high reliability and durability.
• Deliver high definition audio and video signals from your computer to a monitor for video streaming or gaming.
• DisplayPort connector with latches keeps cable securely plugged in.
• All relevant materials are complied with RoHS directive.

Cat6A Slim Ethernet Patch Cable

The FireFold CAT6A Slim Line Ethernet cable is the solution to reduce congestion in high-density CAT6A Network environments, such as data centers,telecommunication, and server rooms. With the Cat6A Slim Line cable, you can fit more cables in the same space. The slim cable diameter is almost half that of a standard CAT6A cable.

Cat6 Shielded Ethernet Patch Cable, Snagless Boot, Gray

Quality You Can Depend On And Performance That Can't Be Beat

Regardless of the type of network you're trying to construct - whether it's for use in a home or in a professional environment - it's safe to say that the stakes could not be higher. The Internet has become a ubiquitous part of our lives over the last decade, which means it's become a critical one, too. So much of success in terms of network design and infrastructure support ultimately comes down to the quality of the cables and other accessories that you're using, which is a major reason why our shielded Cat6 Ethernet cable from FireFold is one of the most important purchases you can make at such a pivotal time.

Though our shielded Cat6 patch cable may seem simple, there's a lot hiding beneath that attractive and durable jacket. For starters, all of our cables are UL certified - meaning they don't just meet, but exceed, TIA/EIA standards. Likewise, our complete range of SSTP patch cables are obviously fully Cat6 compliant with not one but two layers of shielding.

So not only do you get a braided overall screen just beneath the sheath, but each individual pair also has rugged foil screening of its own. This unique shielding method goes a long way towards ruling out interference from a wide range of external sources, making these cables perfect for nearly any application that you might have in mind.

As is true with all of our Cat6 cables, these shielded Cat 6 patch cable options are fully terminated with RJ45 plugs that themselves feature 50 microns of gold. Thanks to the unique way that the cables are molded, you also don't have to worry about snags, tears and other issues during installation or ongoing maintenance in the future. This construction also provides some much needed strain relief for the cable, allowing it to dutifully stand the test of time for years to come.

All of our patch cables from FireFold come complete with a full 60 day money back guarantee, fast and easy returns (should you need to do so, which is rare), are backed by an industry leading customer support team and are available to ship TODAY in most situations. Truly, it doesn't get much better than that.

SVGA Cable with 3.5mm Audio Double Shielded

FireFold's Double Shielded VGA Male to Male With 3.5MM Audio Cable.

Ideal high-performance solution for quickly connecting your PC to a video display system with speakers.

Use this cable with projectors, flat-screen monitors, KVM switches with audio, speakers or a microphone. Designed to support resolutions up to 1600x1200.

Plus this cable is shielded to extend your video and audio signals without distortion or loss.

Keystone Plate - 8 or 12 Ports for Snap In Jacks

Create Custom Multimedia Wall Plates

No two installations are the same and you need the ability to customize your connections to meet your specific needs. Keystone plates are an easy and convenient way to create custom wall plates for your home theater or network setup. Get organization and functionality all in one solution.

Match Any Decor

This neutral white wall plate comes in either eight or twelve port configurations and are appropriate for both commercial and residential applications. The ports fit standard snap in keystone jacks and measure 14.6 x 16.2mm. Both the 8 port keystone wall plate and the 12 port keystone wall plate measure 70.5 x 115mm, fitting standard double gang wall boxes and low voltage brackets. They offer an elegant, finished look with included color matching screws.

100% Lifetime Guarantee

Rest assured you'll only get the highest quality keystone wall plates when you order from FireFold.com. These keystone jack wall plates come with the FireFold Signature Lifetime Warranty against manufacturer defects.

Package Includes

• (1) Keystone Wall Plate in your choice of 8 or 12 ports
• (4) Color Matching Screws

DPM-HDMIF-COUP DisplayPort to HDMI Female Adapter

The DPM-HDMIF-COUP is a male DisplayPort to female HDMI adapter. The DisplayPort connection is most often found as an output on laptops but other computers and monitors can use it as well. With the latest in audio and video HDMI specifications, this adapter can handle all-digital uncompressed resolutions up to 1080p. It also comes 3D-ready with a maximum 10.8Gbps video data transfer rate. DisplayPort can natively carry audio as well as video. However, whether this adapter sends sound over to HDMI will depend on whether your device is designed to output audio through the DisplayPort jack.

As with any other FireFold product big or small, you can expect the highest quality for an incredible value. Gold-plated contacts resist corrosion and signal degradation. Designed for professionals, the tough molded plastic casing stands up to the wear, tear, and stress of constant usage. This little device can easily be hidden out of the way or behind equipment. The adapter also comes with FireFold’s Signature Lifetime Warranty which ensures your purchase is free from manufacturer defects for as long as you own it.

Cat5E Ethernet Patch Cable Snagless in White, Shielded

350 MHz FTP Cords With Performance to Spare

When you're putting together a network, you can't just pick things like patch cables based on your needs as they exist today. Getting the network up and running is one thing. Making it easy to maintain and support that network over time is something else entirely, which is why the solutions you choose in terms of even something (seemingly) simple like patch cables could not be more critical to what you're doing.

When you need a solution that provides both the quality and the versatility necessary to guarantee the top performance in all of today's high speed networks, you need the Shielded Cat5E Patch Cable from FireFold whether you realize it or not. This 350 MHz FTP cord, available in lengths from 0.5 feet to 200 feet for you to choose from depending on your needs, come with a wide array of different features that make it the option to beat across the industry.

For starters, these cables feature a very unique kind of enhanced electrical performance - perfect for supporting the bandwidth intensive applications of today in a way that also prepares your network to help tackle the challenges of tomorrow. Network architects everywhere can also rejoice: these cables are also fully backwards compatible with any 10BaseT or 100BaseT network cards and hubs that you may already be using.

Likewise, these cables are constructed of no less than for totally foiled twisted pairs of 26 AWG stranded copper, complete with a rugged and ultra durable PVC jacket. The FTP wires themselves put you in an excellent position to both eliminate cross-talk and help boost signal quality, all while going a long way towards supporting traditional data transmission as well. Last but not least, our Shielded Cat5E Patch Cable also features RJ45 connectors with 50 micron gold plated contacts - an invaluable feature that helps to guard against corrosion, degradation and absolutely everything in between.

As is true with all patch cable purchases from FireFold, these Cat5E Shielded Ethernet Patch Cables come complete with our industry leading lifetime warranty and are backed by the full might of our incredible customer support team. Not only that but you can also enjoy same day shipping on most orders, fast and easy returns (in the unfortunate event that the need should arise) and much, much more.

Setup.exe - Your Rack Installation Wizard by PATCHBOX

The Setup.exe enables one technician to do the job of two. The Setup.exe secures the weight of equipment, such as switches, in server and network racks until they are securely screwed in. Mounted inside out of a rack the Setup.exe creates the ideal workspace to place a laptop during configuration or terminating a patch panel.

MOUNTED IN SECONDS.

The Setup.exe comes with two spring loaded bolt plungers that safely secure the Setup.exe in place. The brackets can also be adjusted to fit 19" rails with different thicknesses and are made from durable stainless steel. The body of the Setup.exe is aluminum to save weight on your service trips.

MOBILE WORKSPACE.

Easily configure Switches, Servers etc. with two hands while the Setup.exe holds your Laptop for you. One side is rubberized so your Laptop does not slip off.

YOUR IRREPLACEABLE THIRD HAND.

The Setup.exe will become your valuable third hand. No more acts of balancing expensive equipment with one hand while trying to get the screws in with the other. The Setup.exe holds equipment with up to 50kg (110 lbs) for you effortlessly.

YOUR TOOLS WITH YOU ALWAYS.

The Setup.exe has holes to place spare cage nuts in. You can also put some Velcro on it to mount all kinds of tools to it so you always have them with you. Cable ties also have their own spot for times when you need to heavily secure something.

Kendall Howard 1916-2-100 Wall Mount V-Rack

Kendall Howard is one of the top companies out in the rack mount market. Their merchandise ranges to various products besides rack mounts alone, though, and are always high quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

Kendall Howard V-Racks allow you to vertically or horizontally mount servers or other rack-mountable devices regardless of depth. Designed to mount on a wall or under a desk, the Kendall Howard V-Rack provides users more versatility on where they can place their products while saving them space.

These v-racks are low profile, meant to be barely visible from a front view. Each can hold up to 150 pounds easily, so most of your equipment should be able to be on them. They only weigh about 4 pounds themselves, so they are relatively lightweight for easy installation. Each one of these comes in a black powdered finish so that they will blend in with most of your other mounting equipment with ease.

Made in the USA and backed by a limited lifetime warranty from Kendall Howard, you really cannot go wrong with this great product.

What else could you ask for? Well, you might say to yourself, “I could go for a great price.” You’re in luck! You’re at FireFold, where our middle name might as well big ‘great price’. It is not, but, that doesn’t mean you cannot get a price. Just glance up there in the upper right and drool in amazement. You’ll be happy when you make this purchase and so will your wallet!

Cat5E RJ45 Inline Coupler - Female to Female RJ45

For connecting two male RJ45 connectors together, you can’t go wrong with the RJ45-COUP-WHI. This professional coupler features two female RJ45 jacks. RJ45 ends are most commonly found as connections on Cat5E and Cat6 data cables, but this particular coupler will only support the speeds of Cat5E. Cat5E cables are most frequently used to connect elements of a network such as modems, routers, switches, and computers. This tiny adapter has a smooth white finish for inconspicuous installations and is specifically designed for straight-through applications. Other couplers are available for those who need a crossover or shielded configuration.

These RJ45 couplers can be used with any of FireFold’s Cat5E cables, splitters, or jacks for customized networking solutions. In most cases, Cat5E cables can be run fairly long distances, so feel free to extend without worries. It doesn’t matter to us how long you plan for your cables to be joined, either. You can still enjoy our picture-perfect match of low prices and high performance. With our signature lifetime warranty, you can expect this coupler to create quality connections for as long as you both shall live.

Cat6 Slim Ethernet Patch Cable, White

FireFold's Cat6 slim patch cable uses 28 AWG 4 pair UTP Ethernet wire and is designed to optimize the space in telecommunication room and data center. Cable diameter is mere 3mm (0.12") compared to standard 5.8mm (0.23") and provides 48% reduction in diameter and 73% reduction in space. Small size means cables are easier to manage, higher-density patching is more feasible, and valuable rack space can be used for equipment and ventilation, rather than cable management. It is also suitable for residential installation to keep cabling around the cable/DSL modem and router low profile. Our slim patch cable comes with neat looking clear strain relief boots.