3 Year Warranty

ICC Fiber Optic Adapter Panel Quad LC 24F Aqua

The ICC ICFOPL161G Fiber Optic Adapter Panel is designed for high-density applications and is compatible with Multimode Fiber Optic Applications. It is 10G compliant and offers a secure connection between components.

ICC 12 Port Cat5E Vertical Patch Panel

The ICC ICMPP12V5E 12 Port Cat5E Vertical Patch Panel offers an economical solution to achieving superior performance in data networks. It comes preconfigured for T568A and T568B wiring and exceeds ANSI/TIA-568 Category 5E standards.

MOFO™ Media Over Fiber Optic cable - 48G HDMI - Plenum rated

TechLogix MOFO™ HDMI cables leverage a true fiber core to deliver unparalleled speed, bandwidth and reliability. Pre-terminated connectors accommodate installations in seconds and the optical construction provides complete immunity to RF, EM and electrical interference. Plus, MOFO™ cables are built with four strands of re-terminable multimode fiber allowing cable runs to be upgraded and re-purposed in the future.

48G HDMI | 8K60

• 48G 8K60 Dynamic HDR / HDCP 2.2 / 3D / Deep Color
• VRR / QMS / QFT / ALLM / DSC
• Multi-channel audio / Dolby TrueHD / DTS-HD Master Audio / ARC / eARC
• EDID / CEC / HEC

Compatibility Forwards and Backwards

Install MOFO™ cables knowing your installation is covered -- forwards and backwards. Leverage HDMI 2.1 for cutting-edge 8K devices or integrate legacy hardware knowing you have an upgrade path.... MOFO™ cables are completely backwards compatible with older 1080p and 4K technology.

Unlike other connectivity options, MOFO™ even drives beyond HDMI. The true fiber core can be spliced and re-terminated with standard fiber optic connectors. A MOFO™ cable used for HDMI today can be re-purposed for internet or other audio/video formats tomorrow.

Easy Installation

ICC CAT6 RJ45 Keystone Jack for High Performace

ICC’s EZ Category 6 modular jacks, RJ-45 keystone jacks, is 8-position 8-conductor (8P8C) is engineered to provide superior performance and reliability, supporting Gigabit Ethernet applications and beyond. The advanced printed circuit board design is tuned to provide optimum signal quality with maximum headroom, allowing it to exceed TIA/EIA Category 6 performance standards. It offers superior signal quality and noise reduction due to its enhanced Near-End and Far-End Crosstalk cancellation and minimum return losses. The EZ connector’s flat back IDC construction offers faster installation through its straight through in-line termination design and one piece snap-on termination cap.

19" Wall Mount Open Frame Network Rack, Front-Hinged Swing Frame

Flat Pack, 2-Post, 17.7 in. Depth, Black RAL 9004

Hinged open frame enclosure wall rack for network and server equipment

The 6U 19" Wall Mount 2-Post Open Frame Network Rack from Intellinet Network Solutions is a simple, cost-effective way for housing IT equipment in secure environments that don't require a lockable rack solution. It's a great fit in places where small rack solutions are often dispersed throughout an organization, like at a remote location or branch office. Its relatively compact design lets you place it out of the way on a desk or mount it on a wall instead of taking up floor space.

Space-saving

The rack's wall-mountable option is perfect for saving valuable floor space while organizing network and server equipment from telecom, surveillance and audio/video applications where space is at a premium and a full-size floor-standing rack or cabinet cannot be used. The 400 mm (15.75 in.) usable depth of the rack allows for the mounting of shelves, switches, patch panels and more.

Easy access

The open frame design ensures maximum airflow to your equipment for smoother operation and a longer lifespan. It also allows your cabling to enter through all sides. A hinged front frame can be swung open for easy component exchange and maintenance. This construction makes it a smart choice as a test center rack for server and networking equipment.

High-quality steel

The strong and durable housing, constructed of high-quality SPCC cold-rolled steel with antistatic powder coating, carries a load capacity up to 30 kg (66 lbs.) with the frame closed. Its flat-packed shipping condition saves you space and freight costs. The enclosure also saves you the expense of 20 rack screws and cage nuts to securely mount your equipment because it ships with them included.

Middle Atlantic Rackmount Power Strip PD-915R 

The PD-915R from Middle Atlantic provides 8 rear outlets with one front convenience outlet and a 9ft power cord, with plenty of power for all your rackmounted components. All outlets are designated for NEMA 5-15R plugs and have a maximum derated load of 12 Amps.

The PD-915R carries a single-stage surge and spike protector and EMI filtering, giving you an uninterrupted signal and added safety against surge events. It also has an instantaneous response time (1 nanosecond) to surge events.

The DVI-DOC Digital Signal Isolator from PureLink AV offers a secure way to isolate the transmission signal between video source and display for single-link DVI signals. It acts as a repeater for single-link DVI-D signals, extending the distance they can travel.

ICC SC Fiber Optic Adapter Panel

The ICC ICFOPC16BK SC Fiber Optic Adapter Panel is a 6 duplex panel with metal sleeves. It is a secure means to connect fiber optic cables between components.

19" Wall Mount Open Frame Network Rack, Front-Hinged Swing Frame

Flat Pack, 2-Post, 17.7 in. Depth, Black RAL 9004

Hinged open frame enclosure wall rack for network and server equipment

The 6U 19" Wall Mount 2-Post Open Frame Network Rack from Intellinet Network Solutions is a simple, cost-effective way for housing IT equipment in secure environments that don't require a lockable rack solution. It's a great fit in places where small rack solutions are often dispersed throughout an organization, like at a remote location or branch office. Its relatively compact design lets you place it out of the way on a desk or mount it on a wall instead of taking up floor space.

Space-saving

The rack's wall-mountable option is perfect for saving valuable floor space while organizing network and server equipment from telecom, surveillance and audio/video applications where space is at a premium and a full-size floor-standing rack or cabinet cannot be used. The 400 mm (15.75 in.) usable depth of the rack allows for the mounting of shelves, switches, patch panels and more.

Easy access

The open frame design ensures maximum airflow to your equipment for smoother operation and a longer lifespan. It also allows your cabling to enter through all sides. A hinged front frame can be swung open for easy component exchange and maintenance. This construction makes it a smart choice as a test center rack for server and networking equipment.

High-quality steel

The strong and durable housing, constructed of high-quality SPCC cold-rolled steel with antistatic powder coating, carries a load capacity up to 30 kg (66 lbs.) with the frame closed. Its flat-packed shipping condition saves you space and freight costs. The enclosure also saves you the expense of 20 rack screws and cage nuts to securely mount your equipment because it ships with them included.

ICC Stainless Steel Wall Plate

This sleek stainless steel faceplate is designed to cover unused holes in both residential and commercial applications. It fits standard single gang wall boxes and comes complete with screws for installation.

19" Cable Management Panel, 1U

With Cover, Black

Cable management is the key to organization in your network or server racks. Intellinet Network Solutions 19" Cable Managers achieve optimal organization and ensure the best airflow to your equipment. This system employs cable strain relief for increased longevity of your server and networking equipment.

MOFO™ Media Over Fiber Optic Cable - USB 3.1/2.0/1.1 Type C to Type C - Plenum Rated

TechLogix MOFO™ USB cables leverage a true fiber core to deliver unparalleled speed, bandwidth and reliability. Pre-terminated connectors accommodate installations in seconds and the optical construction provides complete immunity to RF, EM and electrical interference. USBC cables extend SuperSpeed and Hi-Speed USB data, power (60W/20V/3A), and 2-lane DisplayPort 1.4 video up to 10m without the need for external power supplies, boosters, or extenders.

Intellinet Industrial Gigabit PoE++ Splitter

IEEE 802.3bt (4PPoE) Compliant, up to 60 W Input, 12 V / 4.25 A DC Output, IP30-rated Metal Housing, DIN-rail Mount

Turn a higher-power PoE link into separate DC/terminal-block power and Gigabit data connections

Need power but don’t have an outlet? Take it from your PoE network with the Intellinet Industrial Gigabit PoE++ Splitter. With a simple Ethernet cable connected to your PoE++ Switch or injector, this Splitter can give up to 51 W to a non-PoE device in tough or industrial environments via your choice of output — a 2-pin terminal block or a DC jack — and still provide a gigabit network connection. It’s a great choice for non-PoE cameras, laptops, and other devices that require a power adapter, and it’s cheaper in both time and money than hiring an electrician.

BZBGEAR 2X2 4K 18Gbps UHD HDMI Video Wall Processor

Video walls shouldn’t be difficult to create. That’s why the BG-UHD-VW2X2 video wall processor requires almost no configuration. All users need to do is plug in their devices, select the layout, and adjust for bezel correction with three simple button presses. If needed, 180° output rotation is an option available for inverted displays to help with bezel obstructions.

These features combine to make this video wall processor a great industry-compliant device with no-fuss setup. With its ease of use, this video wall processor is a great and affordable choice for any application that would benefit from an eye-catching video wall display.

Connectivity

Simplicity is one of the BG-UHD-VW2X2’s greatest strengths. This video processor supports high resolution 4K@60Hz 4:4:4 input resolutions. The four HDMI outputs have a maximum resolution of 1080p@60Hz. This video processor is compliant with both HDCP 2.2 and HDMI 2.0. The device also supports loop out up to 4K@60Hz 4:4:4 for additional local display connectivity. For audio extraction, RCA and TOSLINK audio outputs are available.

Control

Operators have access to multiple control options for the BG-UHD-VW2X2, including an IR remote control, front panel buttons, and RS-232. On the IR remote, five preset bezel adjustments are available. Operators can also rotate the display 180° for inverted displays if needed. These configurations work for both commercial displays and for consumer-based TVs.

The BG-UHD-VWP-1X4 supports a variety of four-screen layouts, including 1x1, 2x2, 1x2 (H), 1x3 (H), 1x4(H), 2x1 (V), 3x1 (V), and 4x1 (V). Mirror mode (180°) is only available for 2x2 layouts.

Techlogix Networx Fiber-based SFP to SFP Media Converter

TechLogix media converters adapt fiber signals to a variety of different formats and/or cable types.

The TL-MC-1S1S features two SFP ports (SFP module sold separately), effectively adapting signals between different fiber types. In most applications, the TL-MC-1S1S adapts single mode fiber to multimode fiber and vice versa.

The MC-1S1S supports multimode fiber when paired with a multimode SFP module and single mode fiber when paired with a single mode SFP module.

19" Wall Mount Open Frame Network Rack, Front-Hinged Swing Frame

Flat Pack, 2-Post, 17.7 in. Depth, Black RAL 9004

Hinged open frame enclosure wall rack for network and server equipment

The 6U 19" Wall Mount 2-Post Open Frame Network Rack from Intellinet Network Solutions is a simple, cost-effective way for housing IT equipment in secure environments that don't require a lockable rack solution. It's a great fit in places where small rack solutions are often dispersed throughout an organization, like at a remote location or branch office. Its relatively compact design lets you place it out of the way on a desk or mount it on a wall instead of taking up floor space.

Space-saving

The rack's wall-mountable option is perfect for saving valuable floor space while organizing network and server equipment from telecom, surveillance and audio/video applications where space is at a premium and a full-size floor-standing rack or cabinet cannot be used. The 400 mm (15.75 in.) usable depth of the rack allows for the mounting of shelves, switches, patch panels and more.

Easy access

The open frame design ensures maximum airflow to your equipment for smoother operation and a longer lifespan. It also allows your cabling to enter through all sides. A hinged front frame can be swung open for easy component exchange and maintenance. This construction makes it a smart choice as a test center rack for server and networking equipment.

High-quality steel

The strong and durable housing, constructed of high-quality SPCC cold-rolled steel with antistatic powder coating, carries a load capacity up to 30 kg (66 lbs.) with the frame closed. Its flat-packed shipping condition saves you space and freight costs. The enclosure also saves you the expense of 20 rack screws and cage nuts to securely mount your equipment because it ships with them included.

ICC Ladder Rack Wall Support Kit 2-Pack

ICC offers a wall support bracket to secure the ends of a ladder rack runway to the wall. The runway is designed to slide into the face of the bracket and be screwed on both ends. The top of the bracket has been reinforced to eliminate movement during installation. The bracket is designed as one-piece and requires no extra parts. Two brackets come packaged per carton.

Middle Atlantic Hinged Accessory Mounting Panel - 4 Space

ICC 2M LC-LC Duplex MM 62.5/125 Fiber Optic Jumper Cable

This ICC ICFOJ1M302 2M LC-LC Duplex MM 62.5/125 Fiber Optic Jumper Cable is constructed of OFNR riser rated cables and exceeds all industry standards. It is designed to fit a single gang outlet box. Dust caps are included for added protection, as well as test results.

ICC Fiber Optic SC Adapter Panel

The ICC ICFOPC26BK SC Fiber Optic Adapter Panel is a 6 duplex panel with ceramic sleeves. It is a secure means to connect fiber optic cables between components.

Cat6A High Density FTP Keystone Jack - 10 Pack

CAT6A high-density (HD), FTP shielded modular jacks (8P8C) is designed to deliver advanced performance for 10G applications and backward compatibles with CAT6 and CAT5e systems. CAT6A high-density (HD) FTP die-cast connector and wire cap shields and protects vital network terminations from harmful Electromagnetic Interference (EMI) commonly present around power cables, heavy machinery and external noises that causes alien crosstalk along the path of a signal. CAT6A FTP shielded modular jacks (8P8C) innovative high-density (HD), split pairs termination allows the jack to be terminated with traditional single blade punch down tool or ICC’s 4-pair JackEasy termination tool.

19" Cable Management Panel, 1U

4 short plastic rings, Black

19" Hinged Wall Bracket

This simple, cost-effective wall mount for shallow 19" rackmount equipment and patch panels is hinged for easy access while taking up limited space.

Techlogix Networx MOFO Media Over Fiber Optic Cable 48G HDMI

TechLogix MOFO™ HDMI cables leverage a true fiber core to deliver unparalleled speed, bandwidth, and reliability. HD21D cables feature detachable HDMI heads for easier pulling through a conduit and tight spaces. Each cable also includes an optional 5V power input with cable for boosting low-output devices on longer cable runs. MOFO™ 8K cables are backward compatible with 1080p and 4K devices.

650MHz CAT6A Bulk Cable with FTP and CMR Blue Copper Premise Cable, 1000ft - Spline

ICC’s CAT6A 10Gig FTP shielded cable provides transmission performance beyond 650MHz and Alien Crosstalk requirements exceeding the industry standards and ETL Verified to TIA-568-C.2 for supporting the operation of 10Gig Ethernet applications (10GBASE-T). It is designed with unique spline design and non-concentric to minimize AXT from neighboring cables. This cabling provides support for high bandwidth applications such as data centers and other data-intensive or backbone requirements. This cable qualifies installations for the ICC Lifetime Certified Site Cabling System Limited Warranty when installed by ICC Certified installers (conditions apply). The cable comes packaged on a reel.

Techlogix Networx Fiber-based Media Converter - 1 SFP & 1 RJ45

TechLogix media converters adapt fiber signals to a variety of different formats and/or cable types.

The TL-MC-1S1R features one SFP port (SFP module sold separately) and one RJ45 twisted pair port, effectively adapting twisted pair-based devices to fiber for longer transmission distances. The MC-1S1R supports multimode fiber when paired with a multimode SFP module and single mode fiber when paired with a single mode SFP module.

Two TL-MC-1S1R media converters are required for most applications -- one for each end of the cable run.

Techlogix Networx Fiber Transceiver

TechLogix SFP and SFP+ transceiver modules adapt TechLogix fiber technology to different cable formats.

The TL-1GSFP-MM550 transmits 1G signals up to 550 meters (1,800 feet) over duplex multimode fiber.

SmartPro LCD 120V 1500VA 900W Line-Interactive UPS, AVR, 2U Rack/Tower, LCD, USB, DB9 Serial, 8 Outlets

Provides complete battery backup and pure sine wave power output for your desktop computer, network workstation, audio/video components or media center.

• Protects equipment against blackouts, brownouts, overvoltages, surges and line noise
• Keeps AC power running during blackouts to allow time for file saves and safe shutdown
• Maintains continuous 120V nominal output during brownouts and overvoltages
• ENERGY STAR-certified to save electricity, lower costs and protect the environment
• Front-panel LCD reports detailed voltage, runtime, load and battery information

Simple and Straightforward

The Middle Atlantic HPM Series, provides a quick and easy solution to wall mounting all of your rackmount components and equipment. The HPM is hinged, letting you have quick access to the rear of your equipment. The rear features a smooth cutout for easy cable pass through.

Middle Atlantic Top Cover for HPM Series Hinged Wall Mount

The PureLink AV HCE II Tx 4K HDMI over HDBaseT Transmitter is designed for in-wall cable installations. It allows you to extend HDMI signals past the typical 50 foot maximum using Ethernet cable. Cat6A or Cat7 Cables are recommended for maximum performance.

The HCE II supports embedded lossless audio formats, bi-directional IR signals, and HDCP-protected content. The ultra slim design makes for a compact, discreet installation.

Blank Wall Mount Patch Panel with 12 Ports and Zero-U for HD Style

The 12-port high-density (HD) flush vertical (wall mount) blank patch panel is designed to be used with high-density (HD) modular connectors. It comes with an 89U bracket offering deeper depth for better cable routing.

J-Hook with Beam Clamp 25 Pack - 3/4"

ICC’s J-Hook with Beam Clamp is a reliable solution designed to support category cables, fiber optic cable, innerduct systems, and other low voltage cabling requirements. The J-Hooks, with a reinforced body capable of withstanding substantial payloads, are constructed from high-quality galvanized steel, ensuring strength and durability. They accommodate a variety of cables, including CAT 5e, CAT6, CAT6A, coax, fiber optic cables, and conduit. The rust-resistant zinc finish adds to their longevity, and the design complies with EIA/TIA requirements for structured cabling systems. Offering a cost-efficient alternative to expensive cable trays or ladder rack runways, these J-Hooks feature smooth edges to protect cables and facilitate a proper bend radius. Cables can be pulled through quickly and easily, and the anchor points are designed to be secured with cable ties. Available in bulk packs of 25, these J-Hooks provide a practical and scalable solution for cable management needs.

1x2 8K UHD HDMI 2.1 Splitter with Audio De-embedder (8K60 4K120 4:4:4 10bit VRR,FVA,ALLM support)

Introducing the BG-8K-DA12A, the 8K HDMI 1x2 Splitter that takes your viewing and gaming experience to the next level. With HDMI 2.1 and HDCP 2.3 compliance, this splitter supports the latest technologies for video and content protection, ensuring that your content is delivered with the highest quality.

For video enthusiasts, the BG-8K-DA12A supports a range of HDR formats, including HDR, HDR10, HDR10+, Dolby Vision, and HLG pass through. This allows you to enjoy a wider range of colors and contrast for a more immersive viewing experience.

Audio is just as important as video, and the BG-8K-DA12A has you covered with support of numerous and latest audio formats, ensuring that your audio is delivered with the highest quality and fidelity. You can also output audio through the optical and analog ports, giving you the flexibility to connect to a range of audio devices.

With advanced EDID management and audio de-embedding, the BG-8K-DA12A is designed to provide maximum flexibility and compatibility with a range of HDMI devices. Whether you're sharing a single HDMI source with two displays or need to split a signal for a presentation or event, this splitter provides high-quality video up to 8K resolution at 60Hz with 4:2:0 chroma subsampling, ensuring that your content is delivered with the highest quality and fidelity.

Finally, for gamers, the BG-8K-DA12A supports 4K resolution at 120Hz, providing the highest level of detail and fluidity for a smooth and immersive gaming experience. In addition, this splitter supports VRR, FVA, and ALLM, allowing you to enjoy smoother, more responsive gameplay on compatible devices. Whether you're playing competitively or just looking to get the most out of your favorite games, this splitter ensures that you can enjoy high-resolution graphics at high frame rates for the ultimate gaming experience.

4x1 8K UHD Ultra Slim HDMI 2.1 Switcher (8K60, 4K120Hz 4:4:4 10bit)

The 8K 4x1 HDMI 2.1 switcher is a versatile device that allows you to switch between four HDMI sources and display the selected input on a single HDMI display. It offers support for high-resolution video up to 8K at 60Hz with 4:4:4 chroma subsampling, providing crisp and detailed images with excellent color accuracy. Additionally, the switcher has a high video bandwidth of 48Gbps, which enables it to handle the large amounts of data required for high-quality 8K video.

This switcher is an ideal solution for those who want to be able to easily switch between multiple HDMI sources, such as a gaming console, Blu-ray player, or streaming device. Whether you're watching movies, playing games, or simply want to be able to easily access multiple sources of content, the 8K 4x1 HDMI 2.1 switcher can help ensure that you have access to the best possible video quality.

For gamers, the ability to display high-resolution graphics at high frame rates is crucial for a smooth and immersive gaming experience. With support for 4K resolution at 120Hz, the BG-8K-HS41 can help ensure that your games are displayed with the highest level of detail and fluidity. This is particularly important for fast-paced games where a high frame rate can make a significant difference in your ability to react to in-game events. Whether you're playing competitively or just looking for the most realistic and engaging gaming experience possible, the 8K HDMI 4x1 switcher’s support for 4K at 120Hz can help you get the most out of your favorite games.

Cat6A High Density FTP Keystone Jack - 10 Pack

CAT6A high-density (HD), FTP shielded modular jacks (8P8C) is designed to deliver advanced performance for 10G applications and backward compatibles with CAT6 and CAT5e systems. CAT6A high-density (HD) FTP die-cast connector and wire cap shields and protects vital network terminations from harmful Electromagnetic Interference (EMI) commonly present around power cables, heavy machinery and external noises that causes alien crosstalk along the path of a signal. CAT6A FTP shielded modular jacks (8P8C) innovative high-density (HD), split pairs termination allows the jack to be terminated with traditional single blade punch down tool or ICC’s 4-pair JackEasy termination tool.

Manhattan 4K 2-Port HDMI Splitter

4K@30Hz, AC Powered, Black

Easily distribute a single Ultra-High-Definition (UHD) signal to multiple displays

The Manhattan 4K 2-Port HDMI Splitter with built-in booster streams a 4K HDMI signal from a single UHD source to up to two UHD displays.

Flexible Solution for Many A/V Applications

Ideal for trade shows, classrooms, video conferencing, home theater, presentations and retail applications, the Manhattan 4K HDMI Splitter features a built-in booster for added signal strength. It’s a good choice for splitting and distributing a synchronous signal to multiple 4K HDMI displays when source equipment is remotely stored in a secured room or cabinet. Cascade multiple units up to three levels to output HDMI video/audio on additional displays in widely distributed applications.

Quality Construction and Easy Installation

Full compliance with HDMI, HDCP 1.4 and DVI 1.0 ensures that the Manhattan HDMI Splitter can provide long service and reliable performance. Quickly connect HDMI cables (not included) and the AC power adapter, and this affordable UHD solution is complete — no software/hardware configuration or complicated settings required.

Manhattan USB To Serial Converter

Connects One Serial Device to a USB Port, Prolific PL-2303 Chip, 45 cm (18 in.)

Easily connect serial devices through a USB port

Most modern computers and laptops don't have RS232 (DB9) ports, making the use of legacy peripherals and high-tech devices which connect with COM ports almost impossible. The Manhattan USB to Serial Converter — with its serial RS232 (DB9) port and Prolific PL-2303 chipset — easily expands a single USB port to connect and support serial modems, barcode scanners, digital cameras, card readers, Ham/Amateur Radios, GPS, CNC machines, telescopes, embroidery machines, fuel injection controllers, PDUs, network switches and other devices.

Quality Construction and Easy Installation

Gold-plated contacts and rugged construction combine to offer a reliable connection between the computer and serial peripherals for consistent, trouble-free performance. Windows compatibility with plug-and-play installation and hot-swappability help provide seamless use without inconvenient and frustrating device conflicts.

Manhattan USB 2.0 Fast Ethernet Adapter

10/100 Mbps Fast Ethernet, Hi-Speed USB 2.0

The Manhattan USB 2.0 Fast Ethernet Adapter is a compact, high-performance network adapter that allows you to upgrade your desktop or notebook computer to operate at 10/100 Mbps speeds on the LAN. Because it attaches to one of your computer’s USB connectors, there is no need to open up your PC — and the user-friendly setup software makes installation quick and easy.

Faster Throughput

The USB 2.0 Fast Ethernet Adapter allows you to connect to the network at 100 Mbps Fast Ethernet throughput speeds. Other adapters that only support USB 1.1 can not even come close to providing you with this enhanced performance.

Auto-Negotiation

The USB 2.0 Fast Ethernet Adapter will automatically detect the network speed that the LAN switch port is set to and run at the same speed. The adapter supports 10Base-T Ethernet and 100Base-TX Fast Ethernet.

Full Duplex

When running in full duplex mode, the USB 2.0 Fast Ethernet Adapter connects at the following link speeds: 20 Mbps (10Base-T Ethernet) and 200 Mbps (100Base-TX Fast Ethernet).

Portable Design

The USB 2.0 Fast Ethernet Adapter is compact and can be easily moved from one computer to another or transferred to your notebook case as you travel. It doesn’t take up a lot of space and doesn't add clutter to your workspace. 

Intellinet Gigabit High-Power PoE+ Extender Repeater

IEEE 802.3at/af Power over Ethernet (PoE+/PoE), metal

Extend the range of a PoE connection

The Intellinet Network Solutions 1-Port Gigabit High-Power PoE+ Extender Repeater, Model 560962, is designed to extend connection distances from a PoE source to an output device another 100 m (328 ft.) via Cat5e or Cat6 cable. You can cover even longer distances by cascading these extenders on a network. The PoE+ extender does not need any additional power supply, as it draws the power it needs from the PoE input.

Simple Installation

Simply connect the "PoE In" port with your PoE injector or PoE switch, and connect the "PoE Out" with the PoE device that you wish to connect; e.g., a VoIP phone or a PoE network camera. That's it. There is nothing to configure. It simply could not be any easier.

Reduce Wiring Costs

No need to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the PoE Extender to the LAN switch port and use the existing Cat5 cabling to deliver DC power as well as transfer data.

Power over Ethernet 802.3at Compliant

The Intellinet Network Solutions 1-Port Gigabit High-Power PoE+ Extender Repeater supports the IEEE 802.3at protocol and is designed to forward data at Gigabit speeds and up to 30 watts of input power to a connected IEEE 802.3af- or IEEE 802.3at-compliant device. The cable length on both ends can be up to 100 meters (328 ft.), bringing the total distance to 200 m (656 ft.).

Cascading Power

You can daisy-chain multiple of the PoE extenders to increase the transmission distance even further. For each PoE extender added, you lose about 4 watts of usable PD power, but if you start with a PoE injector that outputs 30 watts of IEEE 802.3at power — for example, the Intellinet Network Solutions PoE injector (Model 560566) — then you still have 8.6 watts for your PoE device, 5 PoE extenders down the line and 600 meters (1968 ft.) away.

Manhattan Universal Gas Spring Dual Monitor Mount

Two Gas-Spring Jointed Arms, Supports Two 17" to 32" TVs or Monitors up to 8 kg (17.64 lbs.)

Get the ultimate full-motion experience for your displays.

The Manhattan Universal Gas Spring Dual Monitor Mount securely supports two 17" to 32" TVs or monitors. Because it uses gas springs to hold your displays, the arms only need the lightest touch to move them to the best viewing angles for your purposes. The mount's high-quality aluminum and steel construction will provide years of reliable service. Ideal for installation on a large desk, the Manhattan Universal Gas Spring Dual Monitor Mount lets you take advantage of the extra range of movement so you can have more space to get work done.

ICC CAT6 RJ45 Keystone Coupler For HD Style

ICC Category 6 feedthrough in-line coupler module has been tested to ensure that it surpasses Category 6 specifications without degradation in performance. Compatible with all ICC faceplates and blank patch panels.

ICC 2-Post Distribution Rack

Designed to be lightweight and sturdy, these high-quality, black powder-coated aluminum racks are easy to install and use. This 2-post rack will support most rack-mountable network devices and hardware; such as servers, switches, PBX systems, and other Telecom hardware. Includes 3/8-16 bolts and washers for assembly. 

ICC CAT6A 10Gig UTP Cable With CMR Jacket, 1000ft

ICC’s CAT6A 10Gig UTP cable provides transmission performance beyond 650MHz and Alien Crosstalk requirements exceeding the industry standards and ETL Verified to TIA-568-C.2 for supporting the operation of 10Gig Ethernet applications (10GBASE-T). It is designed with a unique spline design and non-concentric to minimize AXT from neighboring cables. This cabling provides support for high bandwidth applications such as data centers and other data-intensive or backbone requirements. This cable qualifies installations for the ICC Lifetime Certified Site Cabling System Limited Warranty when installed by ICC Certified installers (conditions app).

ICC 350Mhz CAT5e Bulk Cable With 24 AWG UTP Solid Wires

ICC’s CAT5e 350 MHz UTP solid cables are manufactured per TIA 568-C.2 industry performance standards and are UL and cUL listed and verified. Available in spools of 1000 ft CMR (Riser) rated in an EZ pull dispensing carton, and constructed with sequential footage markings on the outer jacket for convenient usage tracking. These cables offer a competitive cable solution designed to provide the performance necessary for today’s growing voice, data, video, and security applications in commercial and residential installations. They complete the site cabling system with the value and reliability of ICC.

1G BiDi SFP Transceiver Modules (Set) - Simplex Fiber

The majority of fiber optic cable installed for audio, video, network and control is two strand (duplex) count or greater. This is because most fiber optic electronics, including SFP modules, segregate send and receive signal transmission onto two separate fiber strands. 

Simplex (or one strand) fiber is typically relegated to telecommunications runs, such as ISP feeds outside of a building. However, from time-to-time simplex fiber finds its way into applications where multistrand is required, either from damaged cable or a previously installed or mis-specified cable. 

The TechLogix TL-1GSFP-BD SFP solves this problem by multiplexing duplex communication onto a simplex cable. 

Each TL-1GSFP-BD includes two matching transceivers that feature a single LC connection. The transceivers must be used in pairs and are compatible with standard 1G network switches, media converters and other 1G-based IP devices. 

For added versatility, the TL-1GSFP-BD is compatible with both single mode and multimode fiber. Single mode supports transmission distances up to 6.2 miles, whereas multimode supports transmission distances up to 492 feet.

Middle Atlantic Rackmount Power PD-915RC-20

The PD-915RC-20 from Middle Atlantic provides 8 rear outlets with one front convenience outlet and a 20ft power cord, giving you the opportunity to run a longer distance to the wall. All outlets are designated for NEMA 5-15R plugs and have a maximum derated load of 12 Amps.

The PD-915RC-20 carries a single-stage surge and spike protector and EMI filtering, giving you an uninterrupted signal and added safety against surge events. It also has an instantaneous response time (1 nanosecond) to surge events.

The PureLink HDS-21RS 2x1 HDMI Switcher with Scaling enables an easy way to switch between two different HDMI sources connected to a single display. It features PIP multi-view display technology and supports RS-232, IR and front panel control.