Test Equipment

Quest Deluxe Mult-Network Remote Cable Tester

The Cable Tester TTE-9050 comes with RJ 11, RJ 45, IEEE 1394 and USB port on the front panel and is especially suited for quick-testing of connecting and network cables. The conductors of each cable can be tested separately: the LED row indicates line sag/interruption and line termination, as well as short-circuit, ground contact and
crossed conductors. Short connecting cables can be tested on the main unit directly, while cables which have been layed already are tested using a remote receiver. The test sequence can be adjusted to either manual or automatic mode. With integrated BNC port for testing coaxial network cables.

Quest Remote Lan/Coax/USB Cable Tester

Quest's remote cable tester is ideal for coaxial, LAN patch cables & USB.

Quest Lineman'S Butt Test Set 

Quest's Telephone Lineman Test Set which gives its user DTMF and Pulse mode selection. TTE-2000 also provide Last number redial, 9 memories, Flash, High impedance monitoring, Polarity independent with indicator and Ringing ( with reliable buzzer). This handy Test Telephone is ADSL POTS service compatible with all mode safe to data service. Also its case is rugged and safety with all non-conductive package so it more applicable for authorized repair technicians and for temporary communication.

The DSA540A Sperry Instruments Snap-Around clamp meter is a 10 function, 26 range auto-ranging unit engineered to measure up to 400A AC/DC current, 600V AC/DC voltage, 40 Mohm resistance, frequency, capacitance, diode test and continuity. Similar to digital multimeters, clamp meters offer a large range of functions and include LCD screens to display results but they offer the additional unique ability to measure current without having to contact live conductors. This unit features a data hold and relative measurement to maintain the reading on the liquid crystal display and auto power-off functionality to extend battery life with a low batter indicator to ensure you won't get incorrect readings due to low batteries. Audible beeper permits easy continuity check. We consider safety first; this instrument has been designed and tested and certified to cETLus with CAT II t 600 V and CAT III 300V ratings.

Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal; the condition of electrical installations can be established when contractors use test equipment. Gardner Bender is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer. The PSI8031 verifies proper wiring and connection in 3-phase motor applications.

This heavy-duty, multi-function tool is a must-have for installations and troubleshooting with its ability to indicate voltage levels, test continuity and allow non-contact AC voltage detection. The Sperry Instruments VS61000 Volt Check Voltage Continuity Tester Smart Meter automatically turns on and adjusts to the required application without needing to adjust any dials. The integrated Circuit Alert technology for non-contact AC voltage detection uses the only button found on the test unit. Magnets molded into the back of the unit hold the tester in place while you use the leads. The versatility of this tester, combined with the 10-foot drop rating and 250-pound crush rating, make it one of the most durable, accurate and safe electrical probes on the market today. CAT IV 600V/CAT III 1000 V rated. Limited-lifetime warranty included for extra performance assurance.

Voltage Test Kit VD6504 & GFI6302

Sperry Instruments Crimp-n-Test RJ-45 & RJ-11 Crimping Tool

Cut, strip, terminate and test with this combination modular crimper and cable tester. The heat treated steel frame provides tool durability with RJ-45 and RJ-11 crimp stations. Impact resistant handles with protective rubber overmold comfort grips provide high leverage and impact durability. Test cables terminated with 4, 6 or 8 pin connectors or test in-wall LAN wiring . Built-in tester for continuity, opens, shorts, reversals, and miswires. Ability to test male to male network LAN cables or room to room in-wall network cables. Be immediately confident that your crimps are correct or debug quickly and easily identify faults. Includes a remote that snaps securely into the base of the handle for storage and transportation.

Heavy-duty voltage and continuity tester designed for any number of job site applications. Sperry Instruments unique design allows for convenient single hand testing of outlets when the probes are secured side-by-side on the tester housing. Just insert the probes into the outlet and if voltage is present the neon indicator(s) will glow.

Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal; the condition of electrical installations can be established when contractors use test equipment. Gardner Bender is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer. This convenient pocket size probe allows checking of voltage potential with attached test leads/probes and patented snap-in probe storage preset to standard wall outlet spacing.

The Sperry TRMS 10 Function Digital Multimeter has precise True RMS circuitry for accurate readings of non-linear waveforms. Non-contact voltage detection is integrated into the multimeter design. This multimeter is equipped with a min/max function to hold either minimum reading or maximum reading on the display. Relative Delta displays change in readings. Data hold feature captures reading on the display. Large backlit LCD display with bar graph indication. Impact resistant housing with protective rubber boot. Operates from one 9 volt battery (included).

Like digital multi-meters, clamp meters have a large range of functions and include LCD screens to display results. Unlike their DMM counterparts, clamp meters have the unique ability to measure current without having to contact live conductors. Engineered to exceed the expectations of the professional electrician, the DSA2009TRMS features True RMS circuitry and measurement of up to 2000 Amp AC/DC. Features low pass filtering, Inrush current, oscilloscope output and a backlit display with bar graph to meet the toughest jobs head on. CAT IV 600-Volt rated with a lifetime warranty to ensure safety and reliability in the field.

Safety is the number one priority on any job site. Sperry Instrument's testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. The condition of electrical installations can be established when contractors use test equipment. Any test unit that can be used to measure or review an application without coming in contact with a live conductor is a necessity. Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal; the condition of electrical installations can be established when contractors use test equipment. Sperry Instrument is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer.

CIRCUIT BREAKER FINDER KIT

The Sperry Instruments DSA600TRMS True RMS Clamp Meter has more features and functions without the extra cost! This clamp meter offers a large range of superior functions like advanced temperature measurements and peak hold. The meter gives True RMS readings and measures current without having to contact live conductors. This unit features a data-hold switch to maintain the reading on the 5999 count backlit screen and auto power-off functionality to extend battery life. The built in low battery indicator will ensure you won't get incorrect readings due to low batteries. Audible beeper offers easy continuity check (Buzzer Sounds at 100 Ohms or less). We consider safety first; this instrument has been designed and tested according to cETLus standards and is CAT 3 600V rated. This compact, lightweight, yet durable unit has a crush rating of 250 lbs. and a 10 foot drop rating – the best in the industry.

Safety is the number one priority on any job site. Sperry Instruments' testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal; the condition of electrical installations can be established when contractors use test equipment. Any test unit that can be used to measure or review an application without coming in contact with a live conductor is a necessity. The IR Thermometers allow for critical temperature measurements to be taken without having to touch an energized circuit. The D:S ratio or (Distance to Spot Ratio), is a rating used to state the distance, in feet, that the test unit should be from the target in order to measure a one foot diameter section. In other words, a 12:1 D:S Ratio means that from twelve feet away, the test unit is measuring a one foot diameter section of the target.

Sperry makes the job of locating electrical circuits (AC circuits of 110-125 volts) quick and easy. Turning off the correct breaker is critical when considering work on an electrical circuit and can take an excessive amount of time using "trial and error" until you hit the right one. This Circuit Breaker Finder features a sending unit which you plug into a receptacle in the room where you want to work and a receiving unit which you use to test the breakers to correctly identify the right breaker every time. The receiver features both a visual flashing light and an audible beeping to alert you when the correct breaker is identified. The package includes a user manual and a 9 volt battery required for the receiver unit. A video demonstrating how to correctly use the product is located at www.sperryinstruments.com for easy reference. Unit includes a 1 year warranty.

Engineered to exceed the expectations of the professional electrician the DSA1020TRMS is a 10 Function/ 27 range Digital Snap-Around Clamp Meter with precise True RMS circuitry and a 1000 Amp non-contact current reading. Designed with integrated non-contact voltage detection and a Min/Max data hold capable function which allows you to hold either minimum reading or maximum reading on the display. This Auto Ranging unit features 10 functions and 27 ranges measuring AC/DC V up to 600 V, non-contact AC voltage 80 - 600V and AC/DC Current up to 1000A. Able to test continuity, resistance, True RMS, frequency, and temperature (probe type) this unit features a backlit LCD display ideal for low light applications and an auto power of functionality to save battery life. cULus listed and CE approved with a CAT IV rating to 600V and includes a limited lifetime warranty. Unit ships with a convenient carrying case and 2 AAA batteries (required for use).

Installing a new light fixture? Replacing an outlet? Setting up that SWEET new audio/video/data system? Then get this kit! GB's 304 piece Electrical Value Kit includes everything you need to complete the most common DIY electrical projects from switching out a light-swich or outlet to installing a ceiling fan or light fixture and organizing wires and cables around the home. The convenient storage case with carry handle keeps items organized and at-the-ready until your project begins. Kit includes: (1) Voltage Tester, (1) Wire Stripper/Cutter, (1) Cable Ripper, (1) 3/4" X 60 ft. Roll Black Electrical Tape, (50) 1/2" NM Plastic Staples, (100) 8" 50 lb Cable Ties, (100) 6" 40 lb cable ties, (25) Yellow Wire Connectors, and (25) Red Wire Connectors.

Electronic AC/DC Voltage Tester

ET60 is a solid-state, low impedance, electronic voltage tester. It measures AC/DC voltages up to 600V. The ET60 does NOT require batteries; it is powered by the applied voltage. It is excellent choice for testing voltage in electrical circuits, at outlets, in light fixtures or anywhere else where AC/DC voltage testing is required.

Electronic AC/DC Voltage Tester

Klein Tools ET40 is an Electronic AC/DC Voltage Tester. It features indicators for positive and negative DC polarity, and tests DC voltages as low as 1.5V. It tests AC voltages 12-240VAC. Excellent for checking, verifying or troubleshooting common residential electrical wiring in electrical outlets, light fixtures, doorbells and more. It operates on 2 x AAA batteries.

2000A Digital Clamp Meter

The CL900 is an auto-ranging, true root mean square (TRMS) digital clamp meter that measures AC/DC current via the clamp and measures AC/DC voltage, resistance, continuity, frequency, duty-cycle, capacitance, and tests diodes via test-leads. It features a Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages, and has a dedicated mode for capturing Inrush Current.

The FiberChek Sidewinder is the industry’s first "all-in-one" handheld inspection and analysis solution for multifiber connectors such as MPO. The latest addition to the award-winning VIAVI FiberChek family delivers a completely automated solution to inspect and analyze every fiber of an MPO or other multifiber connectors with industry-leading reliability and speed.

Benefits

• Fully autonomous multifiber inspection
• Automate the inspection workflow
• Certify end face quality to customer requirements
• Ensure accurate and fast test performance with automatic test results in less than 12 seconds
• Easily access connections in any location
• Connect with anything and test anywhere!

Universal 1.25mm patch cord tip, for FBP Series probes

Universal Push Pull (UPP) adapter for LC, MU (d=1.25mm)

MPO/MPO bulkhead tip, for FBP Series probes, long reach

Universal 1.25mm push-pull adapter for FFL-050

Innovative FI-60 Design Gives You Two Essential Fiber Tools in One Device

Inadvertently disconnecting active fiber during installation, test and troubleshooting is a common cause of dropped service. The new FI-60 LFI enables users to easily detect the optical signal without having to disconnect the fiber or disrupt network traffic. The unique Viavi Solution® SafeChekTM system ensures safe and repeatable engagement with most fiber types, without the hassle of changing out costly dies.

The FI-60 easily converts to an Optical Power Meter (OPM), providing twice the value for your investment and reducing the number of tools you have to carry on the job. Simply remove the LFI head attachment, connect the corresponding adapter (2.5 or 1.5mm) and insert a connector to measure power. This versatile tool can display, store, and recall optical power measurements for each of the selectable wavelengths. Users can download the stored data onto a PC via USB. The FI-60 also interfaces with FiberChek2, providing integrated inspection and OPM testing and reporting capabilities.

Digital Fiber Inspection Just Got a Whole Lot Easier

Any seasoned veteran of the industry can tell you that setting up a fiber optic network is only one small part of a much larger story. Maintaining and overseeing that network for the long haul is equally important, as this is what will make sure that the network itself is as reliable and as versatile as it needs to be for years to come. Whether you're concerned about routine maintenance or are trying to fix a major problem, your ability to succeed will ultimately rest on the quality of the tools you choose to bring with you... which is why the Viavi FIT-82P01-PRO Digital Fiber Inspection Kit is such an important addition to your existing arsenal.

Even with a quick glance, there's a lot to like about this Viavi Fiber Inspection Kit. It offers you automated (and effortless) pass/fail analysis for all fiber inspection and testing. Not only that, but you can also store ALL fiber inspection and test results on board, giving you access to comprehensive historical logs that allow you to identify trends, patterns and other opportunities for improvement that would have otherwise gone undiscovered. Truly, generating all of the fiber certification reports that you need has never been easier.

This, complete with the simple user interface and the sophisticated 3.5" color touch screen, make the Viavi Fiber Inspection Kit a worth addition to your day-to-day life. You get the peace-of-mind that only comes with knowing you can complete jobs faster, correctly and on time - the first time - all while unlocking the flexibility of a device that is suitable for use anywhere.

Note that when you order directly from FireFold, you also get access to a number of unique advantages that you aren't going to be able to find anywhere else. Not only have we gone to great lengths to guarantee a 100% safe and easy shopping experience, but you also get same day shipping in most situations. Not only that, but you can also enjoy a full lifetime warranty, a 60 day money back guarantee and fast and easy returns should the need arise. You'll also be backed by the full might of one of the best customer service teams in the business, all pointing to the fact that this is one investment that is more than worth making.

The visual fault locator (VFL) is an essential tool that quickly and easily locates problem areas in fiber cables. By pinpointing the exact location of fiber damage, technicians can diagnose, troubleshoot, and fix the problem efficiently.

Applications

• Locate sharp bends, breaks, and damages in fiber
• Conduct end-to-end continuity tests
• Perform fiber tracing and identification

Klein Tools CL800 is an automatically ranging true root mean squared (TRMS) digital clamp-meter that measures AC/DC voltage, resistance, continuity, frequency, capacitance, and tests diodes via test-leads, and temperature via a thermocouple probe. It also features a Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages. Klein Tools’ Test and Measurement product line was exclusively designed from the ground up by electricians for electricians. Years of field research, combined with extensive input from electricians across America, inspired the development of meters and electrical testers loaded with innovative, time-saving features.

The ET110 is an easy-to-use meter that detects and measures concentration levels of carbon monoxide (ppm) and temperature (Fahrenheit/Celsius), making it the perfect choice for HVAC professionals. Features backlit LCD screen, warning indicator light, audible and visual alarms and multiple function buttons. Includes carrying pouch and 4xAAA batteries.

NETfinder Pro is an expanded version of NETfinder that includes the cable organizer funcation to allow 18 remote units for larger installation. With a low battery indicator, easy to read display and compact size the Netfinder Pro can be essential in your network testing.

Klein Tools Slim Digital Multimeter TRMS Auto-Ranging

Klein Tools MM450 Multimeter is a TRMS auto-ranging slim multimeter that measures AC/DC voltage, AC/DC current, and resistance. It can also measure temperature, capacitance, frequency, duty-cycle, and test diodes and continuity. It features a high visibility, reverse contrast display with an optical sensor to automatically optimize viewing in dark or bright ambient light. The slim profile of the MM450 makes this meter almost the size of a cell phone and it conveniently fits into most pockets. The MM450 features the same quality leads you have come to expect from the Digital Multimeter line at Klein Tools. Years of field research, combined with extensive input from electricians across America, inspired the development of meters and electrical testers loaded with innovative, time-saving features.

Klein Tools Advanced Circuit Tracer Kit

Advanced Circuit Tracer Kit

The Klein Tools ET450 Advanced Circuit Tracer Kit is a professional tracer for energized and non-energized breakers, fuses, and wires. When the Transmitter is connected to a circuit, the Receiver’s sensitivity can easily be adjusted to detect the transmitted signal on breakers, fuses, and wire through drywall, cement block, and underground. Kit comes with transmitter, receiver, blade and ground prongs, alligator clips, 3-Foot and 20-Foot lead adapters, AC plug leads, instructions, all required batteries, and a hard carrying case with handle for convenient transportation and storage.

Klein Tools Tone & Probe Test And Trace Kit

The Tone & Probe Test and Trace Kit provide simple toning and tracing of non-energized wire. The easy-to-use tone generator traces wire when used with the included probe. Alligator clips are provided for unterminated wires and an RJ45 to RJ45 cable to tone or test data cables. The responsive probe is a tone tracer with a durable, non-metallic, conductive tip, a speaker with audible output, and headphone jacks for use in noisy environments (headphones not included). The work light on the probe illuminates dark spaces. The toner and probe together perform pin to pin wire map test .

TelScope Test Set, TLA300-1

The TelScope is the first true 21st century telecommunication line analyzer setting a new standard for POTS butt sets. It is a field instrument that delivers more information of online conditions & status than any other test set on the market, anywhere in the world!!

• Large backlit display for low light environments
• Glow-in-the-dark keypad
• Advanced data detection & identification
• 100% Data Safe
• Rugged weatherproof case, IP54 Standard
• Drop Proof (Tested at 20ft)

Optical Fiber Tester – Light Source, Dual-Emitter, Four-Wavelength (850/1300 nm, 1310/1550 nm)

Optical Fiber Tester – Power Meter

Optical Fiber Visual Fault Locator, Hand-Held, 5-mW, 2.5-mm Adapter

Professional Multi-Function OTDR, 1310/1550 nm

Jonard Tools’ Professional Multi-Function OTDR is the perfect all-in-one handheld device for evaluating FTTx and access network construction and maintenance, identifying fiber breakpoints, measuring cable length, and calculating relative optical power losses