TAA Compliant

Evolution 4K HDMI Extender over Single Coax Cable with Bi-directional IR

The Evolution by Vanco EV4K2004 HDMI Extender can send and receive 4K resolutions over single RG6 coaxial cable with Bidirectional IR. Capable of extending 4K@60Hz up to a distance of up to 330ft/100m and 4K@60Hz with HDR10 High Dynamic Range up to 230ft/70m. The EV4K2004 also features bi-directional IR, which allows for control of the source or display. Also features dynamic EDID management, which allows and encourages source and display “handshake” for seamless integration. Compact design with mounting ears included, for an easy and flexible installation. Can’t run a Cat6 cable to a location? No problem, the EV4K2006 is a great solution for applications which already have an existing RG6 coaxial cable in place.

The EV4K2004 includes two units: transmitting unit (EV4K2004-TX) and receiving unit (EV4K2004-RX). The transmitting unit is used to capture the HDMI input with IR signals and carries the signals via one RG6 coaxial cable. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR and control signals. The EV4K2004 offers the most convenient solution for HDMI extension over a single coaxial cable with long distance capability, and provides a solution in applications where additional cables cannot be installed.

*Installation Note: RG6 coaxial cable must be used, RG59 and mini coax will not work with this product; coaxial connections must be BNC and home-run cable strongly recommended.

HDMI® Extender over Fiber with KVM USB Pass-through

The Evolution by Vanco EVEXFBRK1 HDMI Extender with KVM, bi-directional IR, and RS-232, extends 4K HDR video and audio signals up to 984ft/300M over multi-mode fiber optic cables, and 6.2mi/10km over single mode fiber optic cables and modules! USB 2.0 KVM allows for controlling a security NVR/DVR, computer, NAS system, or any other component that is controlled by USB with this extender. No need to run a separate line or extender just for KVM control! Bi-directional IR pass-through allows for source and/or display control. Also features RS-232 pass-through for additional control. For extending HDMI with 4K HDR resolution at an extreme distance, the EVEXFBRK1 is a great solution for any application.

The EVEXFBRK1 includes two units: transmitting unit (EVEXFBRK1-TX) and receiving unit (EVEXFBRK1-RX). The transmitting unit is used to capture the HDMI input with control signals and carries the signals via fiber optic cables. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR signals. Both units require power.

Evolution HDMI over IP Transmitter/Receiver

The Evolution by Vanco EVOIPLITE HDMI over IP Transmitter/Receiver is a complete audio, video, and control product over ethernet system. As a whole, the system has the ability to send multiple sources to multiple displays along with IR and RS232 pass-through, analog and digital audio breakout in TX mode, video up to 1080P@60Hz, with POE up to 100m when connected to a POE enabled switch off of a single Cat6 cable. This one single unit can be set to transmit or receive signals. When connected to a network with internet, the EVO-IP Cloud allows for additional features such as scheduling events or maintenance, remote monitoring of a system including remote diagnostics and troubleshooting, as well as voice control capabilities with Alexa! With an IP-less installation option as well as any new sources/displays being discovered automatically within the system, the EVO-IP HDMI over IP system is the fast, easy, and cost effective solution for both residential and commercial installations.

4K HDMI 1×2 Splitter with EDID and Scaling

The Evolution by Vanco EVSP12SC, EVSP14SC and EVSP18SC HDMI splitters with 4K, 4:4:4, and HDR pass-through, splits one source signal to multiple displays. These splitters are also able to downscale to 1080p, allowing 4K resolution to be maintained on other outputs. Also features EDID management, with different modes to ensure compatibility with source and display combinations. Supports LPCM 7.1CH, Dolby TrueHD, and DTS-HD Master Audio for advanced audio setups. Take any 4K source and split the signal to multiple displays, while being able to connect both 4K and 1080p displays simultaneously, to ensure the highest quality possible resolution. A great solution for applications with a mix of 4K and 1080p displays!

HDBaseT Extender Set with Wall-Plate Transmitter

The Evolution by Vanco EVWP3000 HDBaseT extender with single-gang wall-plate transmitter supports resolutions up to 4K@60Hz, 4:4:4 chroma over a single Cat5e/6 cable up to 131ft (40m) or 1080p@60Hz up to 230ft (70m). Featuring HDBaseT technology, this extender set supports audio, video, IR, and Power over HDBaseT (PoH) that transmits power over the Cat5e/6 cable. The EVWP3000 is a great wall-plate solution for extending HDMI signals using HDBaseT technology for both residential and commercial installations.

EVO-IP Control Box

Allows for AV distribution, video wall and digital signage capability, control, and more. Only one unit needed for each application.