Scary Sale

Winnie Industries 2" J Hook w/ Angle Clip and Hammer on Flange

Product Description :

2” Data J Hook with 360 Degree Hammer 1/8” to ¼” Flange

Item# WJH32ACM24

LVA1 Bracket

Arlington’s LVA1 is a single gang low voltage bracket with an adjustable depth to accommodate a wall width up to 1.5 inches. These non-metallic brackets are lightweight, sturdy, and versatile. Used primarily for new construction, they are ideal for installations in which the final wall thickness may not be known or when changes to the wall finish may be made in the future. They mount directly to both wood and metal studs and include side tabs for extra in-wall stabilization.

Adjustments can be made to the LVA1’s depth before or after the final wall finish is complete. The adjustment screw is flush with the bracket but readily accessed by simply removing the wall plate, allowing for changes at any time. Changes can be made with any Phillips head screwdriver. These Class 2 low voltage brackets are compatible with any standard single gang wall plate and will arrive to you pre-set at a typical half-inch depth.

Product Description :

4″ Bridle Ring w/ 1/4-20 Thread

Part Number:  WBR4T400

Kendall Howard 10-32 Rack Screws With Washers 50 Pack

All Kendall Howard 10-32 Rack Screws have a pilot point that helps prevent cross-threading and guides the screw when being installed. Kendall Howard rack screws are cold-forged and have a black oxide with wax finish. These truss head screws are .75 inches long and install with any Phillips screwdriver or bit.

DataComm 45-0009-WH Bulk Cable Plate

Use the Easy Mount Recessed Low Voltage Cable Plate to install low voltage cables behind your flat panel TV, your amplifier, or other audio and video devices. The wall plate can be installed upright or upside down.

This plate's innovative "mounting wings" eliminate the need for a low voltage mounting bracket. The mounting wings are molded into the Easy Mount wall plate and fasten tightly against the back of the drywall. The standard Easy Mount Cable Plate has the capacity of a double gang plate in a single gang profile.

The new, thinner profile of the Easy Mount Cable Plate is designed to fit behind the industry's thinnest mounts and flat-panel TVs.

The Slim-Fit version of the Easy Mount Recessed Cable Plate is designed for use in concrete wall applications where the wall cavity is 3/4" to 1" in depth.

LVA2 Bracket

Arlington’s LVA2 is a two-gang low voltage bracket with an adjustable depth to accommodate a wall width up to 1.5 inches. These non-metallic brackets are lightweight, sturdy, and versatile. Used primarily for new construction, they are ideal for installations in which the final wall thickness may not be known or when changes to the wall finish may be made in the future. They mount directly to both wood and metal studs and include side tabs for extra in-wall stabilization.

Adjustments can be made to the LVA2’s depth before or after the final wall finish is complete. The adjustment screw is flush with the bracket but readily accessed by simply removing the wall plate, allowing for changes at any time. Changes can be made with any Phillips head screwdriver. These Class 2 low voltage brackets are compatible with any standard dual gang wall plate and will arrive to you pre-set at a typical half-inch depth.

Kendall Howard 1U Black Flat Rack Mount Panel

Kendall Howard is one of the top companies out in the rack mount market. They provide high quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

The Kendall Howard 1U Flat Spacer Blanks are a cut above the rest. Spacer blanks are often used as a way to fill in any gaps and conceal empty rack spaces in a rack or enclosure. The use of filler panels not only makes racks look neat, clean and organized, but when installed properly they provide added support to the mounting rails. These spacer blanks are also critical for controlling proper airflow especially in cold aisle/hot aisle applications.

Details

This specific flat spacer blank is 1U. A U (unit) is the standard size for a single rack interval. While others can be 2U and 3U, there will be no such waste of space here. This blank spacer is 19 inches long, which is average for most rack panels. It is .06 inches thick, so it is extremely thin. The blank spacer is also 1.72 inches high, which is roughly standard for most patch racks.

Besides all this, you get a lightweight product that is just over a pound - making it extremely easy to get mounted up with the rest of your rack panels. With a limited lifetime warranty provided by Kendall Howard themselves, you can’t really go wrong with this product.

Winnie Industries 1 1/4" Magnetic Bridle Ring

Product Description :

1 1/4" Magnetic Bridle Ring, Short Standoff

Part # WBR125MAG

Features a permanent rare earth magnet with a 1 1/4″ Diameter ring for securing wires and cables.  Can hold up to 107 lbs against 3mm or thicker metal.

Kendall Howard 1902-1-001-01 1U Cable Routing Blank

Kendall Howard is one of the top companies out in the rack mount market. They provide high quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

The Kendall Howard 1U Cable Routing Blank provides the perfect way to route cables within a rack. With this simple device, cables can easily be managed within a cabinet, cutting back on time consuming maintenance as well as avoiding unwanted damage to cables and components.

This 1U cable routing blank is 19” EIA compliant, so you can use it with nearly any rack mount solution that you plan to use. Cable routing panel can be installed to safely direct cables from left to right or front to back. Of course, we recommend you use Kendall Howard with this piece of equipment for best results! However, it is not required. As long as the dimensions match up, you’ll be perfectly fine.

Details

This cable routing blank comes with seven, large open cut-outs that provide ample room for routing various cables such as copper, fiber optic, telecom, and power cables. When you have smaller cable bundle installations, the use of the included tool-less clips makes installation easy with universal cage nut style rails. For heavier cable bundles the use of rack screws and cage nuts are recommended.

As far as the cut-outs themselves, they come with rounded edges to allow for you to not have to worry about injury to yourself or equipment when installed. What possibly could you wish for more than this? Perhaps no injury to your wallet, I bet you’re saying. Well, this is FireFold. Of course your wallet will be feeling just fine afterwards!

Winnie Industries 2" Basic J Hook

Product Description :

2” Data Cabling J Hook

Item# WJH32

Quest Cable Tray T Wall Holder with Clamp Set

Quest offers kits of cable tray accessories to allow mounting on the wall.

Winnie Industries 2" J Hook w/ Bat Wing

Product Description :

2” Data J Hook with Batwing

Item# WJH32W

Kendall Howard 2 Unit Flat Spacer Blank

Kendall Howard is one of the top companies out in the rack mount market. They provide high-quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

The Kendall Howard 2U Flat Spacer Blanks are a cut above the rest. Spacer blanks are often used as a way to fill in any gaps and conceal empty rack spaces in a rack or enclosure. The use of filler panels not only makes racks look neat, clean, and organized, but when installed properly they provide added support to the mounting rails. These spacer blanks are also critical for controlling proper airflow, especially in cold aisle/hot aisle applications.

Details

This specific flat spacer blank is 2U. A U (unit) is the standard size for a single rack interval. While others can be 3U, there will be no such waste of space here. This blank spacer is 19 inches long, which is average for most rack panels. It is .06 inches thick, so it is extremely thin. The blank spacer is also 3.47 inches high, which is roughly standard for most patch racks that have around 24 ports.

Besides all this, you get a lightweight product that is just below two pounds - making it extremely easy to get mounted up with the rest of your rack panels. With a limited lifetime warranty provided by Kendall Howard themselves, you can’t really go wrong with this product.

Jonard Tools Wire & Kevlar Cutting Shears

The Jonard Tools JIC-186 Wire and Kevlar® Cutting Shears are designed to cut Kevlar®, cabling insulation, tape, cable ties, and other materials with ease.

Kendall Howard Light Duty Rack Shelf

The Kendall Howard 1U 6" Light Duty Rack Shelf is constructed of top-grade US steel. Rated to hold up to 45 lbs., this cantilever rack shelf is perfect for supporting monitors, switches, and other lightweight network or A/V equipment.

• 6" depth
• 45 lb. weight capacity
• 250 lb. weight capacity
• 19" EIA compliant
• Made in the USA
• Limited Lifetime Warranty

Winnie Industries 3/4" Magnetic Bridle Ring

Product Description :

3/4" Magnetic Bridle Ring, Short Post

Part # WBR075MAG

Features a permanent rare earth magnet.  3/4″ Diameter ring for securing wires and cables.

Winnie Industries 3/4" J Hook w/ Pressed Beam Clamp

Product Description :

3/4" Data J Hook w/ Pressed Beam Clamp

Part # WJH12PBC

Single Gang, Flush Style, Faceplate, Without Id Windows

1/2/3/4/6 Single-gang flush style faceplates are configured to fit a standard single gang outlet box. Each keystone port is compatible with various modular snap in connectors.

Jonard Tools Flush Cut Plier

Jonard’s flush-cut pliers are made of high carbon SK5 steel and are heat-treated for maximum strength and durability.

Kendall Howard 4U Flat Spacer Blank

Kendall Howard is one of the top companies out in the rack mount market. They provide high-quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

The Kendall Howard 4U Flat Spacer Blanks are a cut above the rest. Spacer blanks are often used as a way to fill in any gaps and conceal empty rack spaces in a rack or enclosure. The use of filler panels not only makes racks look neat, clean, and organized, but when installed properly they provide added support to the mounting rails. These spacer blanks are also critical for controlling proper airflow, especially in cold aisle/hot aisle applications.

Details

This specific flat spacer blank is 4U. A U (unit) is the standard size for a single rack interval. This blank spacer is 19 inches long, which is average for most rack panels. It is .06 inches thick, so it is extremely thin. The blank spacer is also 6.97 inches high, which is roughly standard for most patch racks that have around 96 ports.

Besides all this, you get a lightweight product that is just below three pounds - making it extremely easy to get mounted up with the rest of your rack panels. With a limited lifetime warranty provided by Kendall Howard themselves, you can’t really go wrong with this product.

Surface Mount Box W/Cover & Base, Adhesive Strip & Mounting Screws

These 1/2/4/6 port surface mount boxes are designed for any surface mount installation that does not require faceplates or openings directly on walls or flat surfaces.

19" Cable Management Panel, 1U

With Cover, Black

Cable management is the key to organization in your network or server racks. Intellinet Network Solutions 19" Cable Managers achieve optimal organization and ensure the best airflow to your equipment. This system employs cable strain relief for increased longevity of your server and networking equipment.

Kendall Howard Rack Screws With Washers

The Kendall Howard 12-24 Rack Screws with washers are not your everyday hardware store item. These superior, American-made, quality screws should be your only choice for securing rackmount devices such as shelves, cable managers, servers, and other networks, A/V, and electronic equipment.

• 0.75" in length
• 12-24 pilot point
• Phillips truss head
• RoHS compliant
• Made in the USA

10-32 Cage Nut Set, 50 Pack

Jar of 50 10-32 Cage Nuts, Screws and Washers

The Intellinet Network Solutions 10-32 Cage-Nut Set provides the highest-quality securing materials so that your expensive networking equipment stays secure in the racks and cabinets you've installed them in.

19" Hinged Wall Bracket

This simple, cost-effective wall mount for shallow 19" rackmount equipment and patch panels is hinged for easy access while taking up limited space.

Kendall Howard 3" D Flanged Lacing Bar

Save space and time while managing your network cables with the Kendall Howard 3” Depth Flanged Lacing Bar. Designed to mount above, below, behind, or in front of your network devices, the 3” Depth Flanged Lacing Bar allows you to do more by using less space. It provides much-needed stress relief for cable connections. Stress no more about crowded areas, unorganized cables, and strained connections with the Kendall Howard 3” Depth Flanged Lacing Bar.

• 3" depth
• Features ½" slots to use with any ½" cable ties
• Uses less than one U space, or none at all if mounted in front of or behind equipment
• Versatile, horizontal mounting
• 19" EIA compliant
• Made in the USA

Kendall Howard 1U Flanged Spacer Blank

Kendall Howard is one of the top companies out in the rack mount market. They provide high-quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

The Kendall Howard 1U Flanged Spacer Blanks are a cut above the rest. Spacer blanks are often used as a way to fill in any gaps and conceal empty rack spaces in a rack or enclosure. The use of filler panels not only makes racks look neat, clean, and organized, but when installed properly they provide added support to the mounting rails. These spacer blanks are also critical for controlling proper airflow, especially in cold aisle/hot aisle applications.

Details

This specific flanged spacer blank is 1U. A U (unit) is the standard size for a single rack interval. While others can be 2U and 3U, there will be no such waste of space here. This blank spacer is 19 inches long, which is average for most rack panels. It is .5 inches thick, so it is extremely thin. The blank spacer is also 1.72 inches high, which is roughly standard for most patch racks. Plus, this spacer includes tool-less clips that make installation a breeze.

Besides all this, you get a lightweight product that is just over a pound - making it extremely easy to get mounted up with the rest of your rack panels. And once mounted, the round corners will help you not damage yourself or equipment if they bump into the spacer by accident.

With a limited lifetime warranty provided by Kendall Howard themselves, you can’t really go wrong with this product.

Microduct Tube Cutter

Designed to cut microducts cleanly and straight, this microduct cutter is perfect for cutting most microducts including tubing made from PVC, Nylon, and other materials up to 14 mm (9/16") in diameter.

19" Cable Management Panel, 1U

4 short plastic rings, Black

RETYZ EveryTie 12 Inch 50lb Releasable Tie Plenum Rated

Make it quick. Make it easy.

The Easy Release Cable Tie is the revolutionary new cable tie from RETYZ. This *patented* design combines the high strength of nylon zip ties with a newly designed Easy Release head. How easy is it to release this new cable tie? It takes only TWO fingers to squeeze and pull. That's it! That means no more cutting away zip ties. No more nicked wires and destroyed cables. No more "releasable" zip-ties that are almost impossible to use. With the Easy Release cable tie from RETYZ, you get the best of both worlds.

Reduce, Reuse, Save Money!

Regular zip ties have a single-use and then get cut/removed for disposal. That means continuously spending money on new cable ties. That's not the case with the Releasable Cable Tie from RETYZ. This zip tie has been designed with versatility and reusability in mind and can be used and reused numerous times without losing strength or durability. That means adding or removing a cable to your well-managed cable bundles is easier than ever. Need to make some adjustments in your garden? The RTZ Cable Tie has you covered.

Easy to see. Safe to use.

Don't let the simplicity of the Releasable Cable Tie fool you. RETYZ has packed this tie with features. You'll never have to worry about missing one of these ties again! Available in high-visibility neon green, you'll be able to see these ties almost anywhere. Rough edges are a thing of the past. The?SafetyEdge?found on the Easy Release cable tie was developed for repeated use. It features a rounded tail and smooth, beveled edges, making this tie easy on the hands and even easier to use. The Comfort Reflex Thumbpad, in conjunction with the Stable+ Backplate, makes releasing effortless.

Winnie Industries 1 5/16" Basic J Hook

Product Description :

1 5/16” Cata Cabling J Hook

Item# WJH21

Cable Stripping Tool for RG59, RG6 Cables and CAT/TP Twisted Pair Cables

The Jonard Tools UST-150 cable stripping tool is designed to strip RG59, RG6, N48, RG6 Tri & Quad Shield coaxial cables and unshielded twisted pair jackets for quick and easy termination.

CAT6 RJ45 Pass-Through Connectors (Pack of 25)

The Jonard Tools CAT6 RJ45 Pass-Through Connectors are used by network installers/technicians in order to terminate CAT6 network cables with a pass-through crimper. They are used in households and businesses and are ideal for terminating a round network cable or even replacing an existing connector.

Intended for use with Jonard's RJ11 and RJ45 connector crimping tool: UC-4569

RG6 Connectors (Pack of 10)

Designed for RG6/6 Quad COAX cable for quick and easy termination of cables for satellite, cable TV, and cable modems.

Non Impact Punch Down Tool, 110 Blade w/ Cutter

Designed as an economical option for seating and trimming wire in 110 type punchdown blocks, the PD-110 is perfect for small do-it-yourself jobs on 110-terminal blocks.

CAT/TP Cable Stripper

The Jonard Tools CSR-56 CAT/TP stripping tool is designed to strip CAT-5, CAT-5e, CAT6, and other similar sized twisted pair cables for quick and easy termination.

RETYZ EveryTie 8" 50lb Releasable Tie Plenum Rated

Make it quick. Make it easy.

The Easy Release Cable Tie is the revolutionary new cable tie from RETYZ. This *patented* design combines the high strength of nylon zip ties with a newly designed Easy Release head. How easy is it to release this new cable tie? It takes only TWO fingers to squeeze and pull. That's it! That means no more cutting away zip ties. No more nicked wires and destroyed cables. No more "releasable" zip-ties that are almost impossible to use. With the Easy Release cable tie from RETYZ, you get the best of both worlds.

Reduce, Reuse, Save Money!

Regular zip ties have a single-use and then get cut/removed for disposal. That means continuously spending money on new cable ties. That's not the case with the Releasable Cable Tie from RETYZ. This zip tie has been designed with versatility and reusability in mind and can be used and reused numerous times without losing strength or durability. That means adding or removing a cable to your well-managed cable bundles is easier than ever. Need to make some adjustments in your garden? The RTZ Cable Tie has you covered.

Easy to see. Safe to use.

Don't let the simplicity of the Releasable Cable Tie fool you. RETYZ has packed this tie with features. You'll never have to worry about missing one of these ties again! Available in high-visibility neon green, you'll be able to see these ties almost anywhere. Rough edges are a thing of the past. The?SafetyEdge?found on the Easy Release cable tie was developed for repeated use. It features a rounded tail and smooth, beveled edges, making this tie easy on the hands and even easier to use. The Comfort Reflex Thumbpad, in conjunction with the Stable+ Backplate, makes releasing effortless.

Kendall Howard ESD Cabinet Drawer Divider

The Kendall Howard ESD Cabinet Drawer Divider provides a simple way to separate and organize different sized components. Provides a conductive surface when installed in Kendall Howard Drawer Part Number ESDC-7836-1200.

• ESD protected
• Made in the USA
• Limited Lifetime Warranty

Kendall Howard Flat Cable Lacing Panel

Kendall Howard Flat Cable Lacing Panels manages cables to and from patch panels, switches, and other networking devices. The panel design lets you secure cables to the vertical and horizontal lacing slots with our Hook and Loop Cable Ties (SKU 0300-1-002-00 sold separately). Mounting our Flat Cable Lacing Panels to your rack allows easy and manageable access to connections that otherwise be difficult. Supports and relieves strain at connection points.

• Vertical and horizontal lacing slots
• 19" EIA compliant
• Made in the USA
• Limited Lifetime Warranty

Kendall Howard Adhesive Backed Cable Holders

Keep cables and cords in place with the Adhesive Backed Cable Holders. These self-sticking, rounded holders have a “mouth” to hold cables in place and avoid being tangled with other cables. They are made of soft plastic material to help prevent damage or wearing of the cables. Once the holder is put in place, it will be a permanent hold for your cables. The Adhesive Backed Cable Holders are suitable for cables within a Wall Mount Charging Station, LINIER® Wall Mount Cabinet, 2-post rack, or other network enclosures.

• Nine pack
• Plastic material with TPU adhesive
• Permanent adhesive
• 1-Year Limited Warranty

Product Description :

4″ Data J Hook with 360 Deg Hammer 1/8” to ¼” Flange

Item# WJH64ACM24

Winnie Industries 4" J Hook w/ Pressed Beam Clamp

Product Description :

4″ Data J Hook with Pressed Beam Clamp

Item# WJH64PBC

These 10-24 threaded rod size one inch beam clamps from Arlington Industries are designed to save you time and money. The strong malleable iron construction allows you to attach hanger rods to structural elements without the need for welding or drilling.

2” Cable Loop

The LOOP is a versatile, low-cost alternative to traditional J-hooks and cable trays. For use with beam clamps in new and existing construction, these flexible non-metallic wire hangers elevate and contain your communications cable without any bending, sagging, or damage. They’re perfect for fiber optic and Cat cables. These cable loops can be mounted parallel or perpendicular to the beam, and they can be stacked to maximize space.

Manufactured by Arlington, the TL20P is a 2” version of The LOOP. It can hold a wire bundle up to 2” in diameter, the equivalent of about 60 Cat5 cables. These patented hoops are also UL listed for use in environmental air handling spaces and they are UV rated to withstand long-term outdoor use. A unique design makes adding, subtracting, or changing the cables in your current run quick and painless. The loop can be unfastened and refastened by lifting the tab off or onto a latch. The LOOP is also available for purchase in a 2.5” and a 5” size.