Scary Sale

Kendall Howard 5" D Flanged Lacing Bar

Properly manage and protect your cables with the Kendall Howard 5" D Flanged Lacing Bar. Its size and versatility make this a true space-saving cable manager. Designed to mount above, below, behind, or in front of your network devices, the 5" D Flanged Lacing Bar allows you to do more by using less space. And that's not all. It also provides much-needed stress relief for cable connections. Crowded spaces, unorganized cables, and strained connections are no longer an issue with the Kendall Howard 5" D Flanged Lacing Bar.

• 5" depth
• Features ½" slots to use with any ½" cable ties
• Uses less than one U space, or none at all if mounted in front of or behind equipment
• Versatile, horizontal mounting
• 19" EIA compliant
• Made in the USA
• Limited Lifetime Warranty

Kendall Howard Hook and Loop Cable Ties

Kendall Howard Hook and Loop Cable Ties are built to provide a secure hold when separating and managing multiple cables to your patch panels, switches or other networking devices. Hook and Loop Cable Ties are reusable and are the preferred choice for many network installers. Unlike traditional cable or zip ties, which can damage the copper or fiber optic cables if pulled too tight, the Hook and Loop Cable Ties are designed to not be over tightened. Do not let its size fool you. Although small and just 8" long, they can be used to bundle trunk cables inside and outside of the rack. This convenient 10 pack is a great addition to any installer's toolbox. Now you can create an organized racking system with the help of these Hook and Loop Cable Ties and other Kendall Howard cable management products.

• Quantity: 10
• Reusable up to 200 uses
• 0.5" W x 8" L
• Cable capacity: Approximately 40 network cables
• Made in the USA
• 1-Year Limited Warranty

Kendall Howard Wall Mount Hardware Kit

Mounting cabinets and racks don't have to be a pain. The Kendall Howard Wall Mount Hardware Kit makes installing wall mount solutions quick and easy. With all the hardware you need to get the job done, the Wall Mount Hardware Kit will have you mounting your cabinets like a pro.

• Phillips head bolts
• Takes 1/2" drill diameter hole; meets Federal Specification Requirements FF-B-588D Type V
• Pre-assembled, ready for use
• Automatically adjusts to wall thickness

Winnie Industries 1 5/16" J Hook w/ Angle Clip and Hammer on Flange

Product Description :

1 5/16” Data J Hook with 360 Degree Hammer 1/8” to ¼” Flange

Item# WJH21ACM24

Kendall Howard Flat Spacer Blank 3U

Kendall Howard is one of the top companies out in the rack mount market. They provide high-quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

The Kendall Howard 3U Flat Spacer Blanks are a cut above the rest. Spacer blanks are often used as a way to fill in any gaps and conceal empty rack spaces in a rack or enclosure. The use of filler panels not only makes racks look neat, clean, and organized, but when installed properly they provide added support to the mounting rails. These spacer blanks are also critical for controlling proper airflow, especially in cold aisle/hot aisle applications.

Details

This specific flat spacer blank is 3U. A U (unit) is the standard size for a single rack interval. This blank spacer is 19 inches long, which is average for most rack panels. It is .06 inches thick, so it is extremely thin. The blank spacer is also 5.22 inches high, which is roughly standard for most patch racks that have around 48 ports.

Besides all this, you get a lightweight product that is just above two pounds - making it extremely easy to get mounted up with the rest of your rack panels. With a limited lifetime warranty provided by Kendall Howard themselves, you can’t really go wrong with this product.

Kendall Howard Cable Routing Blank 2U

Kendall Howard is one of the top companies out in the rack mount market. They provide high-quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

The Kendall Howard 2U Cable Routing Blank provides the perfect way to route cables within a rack. With this simple device, cables can easily be managed within a cabinet, cutting back on time consuming maintenance as well as avoiding unwanted damage to cables and components.

This 2U cable routing blank is 19” EIA compliant, so you can use it with nearly any rack-mount solution that you plan to use. A cable routing panel can be installed to safely direct cables from left to right or front to back. Of course, we recommend you use Kendall Howard with this piece of equipment for best results! However, it is not required. As long as the dimensions match up, you’ll be perfectly fine.

Details

This cable routing blank comes with fourteen, large open cut-outs that provide ample room for routing various cables such as copper, fiber optic, telecom, and power cables. When you have smaller cable bundle installations, the use of the included tool-less clips makes installation easy with universal cage nut style rails. For heavier cable bundles the use of rack screws and cage nuts are recommended.

As far as the cut-outs themselves, they come with rounded edges to allow for you to not have to worry about injury to yourself or equipment when installed. What possibly could you wish for more than this? Perhaps no injury to your wallet, I bet you’re saying. Well, this is FireFold. Of course, your wallet will be feeling just fine afterward!

DataComm  1-3/4 Inch Hole Saw Plate

This two-by-two-inch wall plate is designed to conceal low voltage cables behind the smaller home theater and security equipment. The compact design mounts inside a 1-3/4 inch hole and features a 0.77 x 0.87-inch brush opening. Built-in wings enable mounting without the need for a low voltage mounting bracket. Simply tighten the screws into place for a secure hold.

DataComm Split Wall Plate with Flexible Opening

Cover Ups

Bulk pass-through wall plates are a must-have for many in-home and professional wire installations. They combine ease with a clean look and allow cables to be accessed and swapped without the purchase of a new plate. There’s no universally perfect pass-through plate, though. Personal preference differs just as much as practical application, but DataComm’s 45-0017-WH Split Wall Plate with Flexible Opening is a great option for many projects. The top and bottom halves can be pulled completely apart, so it is especially handy for situations in which the wires are already run or a cable has a large connector such as VGA and DVI.

This Split Wall Plate fits on any standard single-gang box or bracket and comes with a pair of color-matched screws. The extremely slim profile allows this wall plate to fit into tight spaces like those behind a mounted television. A flexible plastic sheet covering the opening offers a clean and inconspicuous look while still accommodating up to six standard sized cables. The natural white color blends in well with most décor and, once installed, the edge between the top and bottom halves is virtually indistinguishable.

Quest UG-3 Splice 19-26AWG Connectors

If you ever find your back to the wiring wall, failure is not an option. To ensure success, we suggest you arm yourself with these TBN-1004 UG-3 IDC Splice Connectors from Quest. With this 100-pack in your back pocket, those wires won’t even know what hit them.

IDC stands for “insulation displacement connector,” and these stay right where they belong. These connectors can house two or three 19-26 AWG solid copper wires, and there’s no need to purchase extra tools. That pair of pliers you already own? Those’ll do just fine although there are specialized tools that provide more even pressure. Installing IDC connectors is lightning fast. There’s no stripping or prep needed. These connectors have teeth- literally. You just insert your wires and put the squeeze on the barrel. It’s lined with a metal plate that will pierce through the wire insulation for the conductivity you need and an iron grip. Outdoor environments are nothing to these, either. They’re filled with a protective silicone gel to keep out pesky moisture and fend off corrosion. So, go on. Splice in your house, at the office, or in your basement… No one ever has to know.

DataComm 45-0008-WH Bulk Cable Plate

Use the Easy Mount Recessed Low Voltage Cable Plate to install low voltage cables behind your flat panel TV, your amplifier, or other audio and video devices. The wall plate can be installed upright or upside down.

This plate's innovative "mounting wings" eliminate the need for a low voltage mounting bracket. The mounting wings are molded into the Easy Mount wall plate and fasten tightly against the back of the drywall. The standard Easy Mount Cable Plate has the capacity of a double gang plate in a single gang profile.

The new, thinner profile of the Easy Mount Cable Plate is designed to fit behind the industry's thinnest mounts and flat-panel TVs.

BES Repair Kit - for 5/32" Glow Fish II (1-Male, 1-Female, & Glue)

3/16" Coated Glow Fish 3 Foot Kit  (24' total)

18" 'Tool Box' Kit' - 5/32" Glow Fish II (12' Total)

This compact kit contains easy-to-store 18” rods that screw together for 12 total feet of reach. Perfect for keeping in a toolbox or bag.

BES 6 Foot Kit - 3/16" Glow Fish (30' total)