12U

The SRWO8U22 SmartRack 8U/12U/22U Expandable Flat-Pack Low-Profile Switch-Depth Wall-Mount 2-Post Open-Frame Rack stores and organizes EIA-standard 19-inch rack equipment compatible with 2-post mounting in network wiring closets, back offices and other secure IT areas with limited floor space where a locked enclosure is not required. Mounted to the wall or resting on the floor, this rack offers fast, easy access to network components and cabling.

Constructed from heavy-duty steel with a durable black powder-coated finish, the rack has a maximum load capacity of 150 pounds. The expandable design allows you to assemble the rack in an 8U, 12U or 22U configuration to meet your current needs, while leaving rack space in reserve for future expansion.

The rack is simple to assemble and mount to the wall. Threaded 12-24 mounting holes and numbered rack spaces make equipment installation easy. The vertical mounting rails accommodate equipment up to 18 inches deep, such as network switches and patch panels. Assembly and equipment-mounting hardware is included.

• Perfect for network wiring closets, back offices and other secure areas with limited floor space where a locked enclosure is not required
• Stores and organizes EIA-standard 19 in. rack equipment compatible with 2-post mounting
• Maximum load capacity of 150 lb.

• Assembles in 8U, 12U or 22U configuration to meet current needs
• Expands to add equipment later without having to buy a bigger rack
• Allows easy access for installing, configuring and servicing equipment and cabling

• Wall-mounting holes spaced 16 in. apart for standard wall stud placement
• Vertical mounting rails accommodate equipment up to 18 in. deep, such as network switches and patch panels
• Rails support threaded-hole equipment mounting
• Rack spaces numbered for easy reference
• Includes assembly and equipment-mounting hardware

LINIER® Wall Mount Vertical Rail Kit - Cage Nut

The LINIER® Wall Mount Vertical Rail Kit gives installers the ability to integrate additional cage nut style mounting rails into a LINIER® Fixed or Swing-Out Wall Mount Cabinet. When installing network, security, or low-voltage electrical equipment sometimes additional mounting points are required. This additional set of rails will provide the added mounting functionality you need.

• Fully adjustable
• Can be used with the LINIER® Swing-Out Wall Mount Cabinet
• Includes two cage nut style rails
• Installation hardware included
• Made in the USA
• Limited Lifetime Warranty

Kendall Howard Fixed Wall Mount Cabinet

The Kendall Howard LINIER Fixed Wall Mount Cabinet has a locking vented door for both increased air flow and added security. This sturdy cabinet is an economical solution to installs, with a variety of features to help you make the most out of your project.

Multiple knockouts provide cable entry for easy runs, while the included cage nut style rails adjust in one inch increments for maximum versatility. Removable side panels offer easy access to your equipment for maintenance, or added ventilation when needed.

The vented, locking door provides additional security for your valuable components. Both the door and side panels are lockable for three-point protection.

• Includes one locking vented door
• Locking side panels
• 250 lb. weight capacity
• One set of cage nut style mounting rails
• Mounting depth: 22.50"
• 19" EIA compliant
• Made in the USA
• 5-Year Limited Warranty

Kendall Howard Linier Swing-Out Wall Mount Cabinet

The LINIER® Swing-Out Cabinets are designed to solve the everyday problems technicians have while installing and managing the immense amount of cabling that is all-too-common with datacom and telecom equipment. Don't work around the rack...get a rack that works around you!

• Includes one locking vented door
• Locking side panels
• 150 lb. weight capacity
• One set of cage nut style mounting rails
• 90-degree swing-out
• Mounting depth: 22.5"
• 19" EIA compliant
• Made in the USA
• 5-Year Limited Warranty

Kendall Howard Linear Fixed Wall Mount Cabinet 

You can trust American-made engineering with the Kendall Howard LINIER Fixed Wall Mount Cabinet. This sturdy cabinet is an economical solution to installs, with a variety of features to help you make the most out of your project.

Multiple knockouts provide cable entry for easy runs while the included cage nut style rails adjust in one-inch increments for maximum versatility. Removable side panels offer easy access to your equipment for maintenance or added ventilation when needed.

The solid, locking door provides additional security for your valuable components. Both the door and side panels are lockable for three-point protection.

• Includes one locking solid door
• Locking side panels
• 250 lb. weight capacity
• One set of cage nut style mounting rails
• Mounting depth: 22.50"
• 19" EIA compliant
• Made in the USA
• 5-Year Limited Warranty

Kendall Howard Linier Wall Mount Vertical Rail Kit

The LINIER® Wall Mount Vertical Rail Kit can be installed in either the LINIER® Fixed or Swing-Out Wall Mount Cabinets to provide a 10-32 tapped rail solution. This tapped rail kit can replace the cage nut style rails that are included with the LINIER® Fixed and Swing-Out Cabinets for installers who prefer a tapped rail mounting solution.

• Fully adjustable
• Includes two 10-32 tapped rails
• Can be used with the LINIER® Swing-Out Wall Mount Cabinet
• Installation hardware included
• Made in the USA
• 5-Year Limited Warranty

LINIER® Swing-Out Wall Mount Cabinet - Solid Door

The LINIER® Swing-Out Cabinets are designed to solve the everyday problems technicians have while installing and managing the immense amount of cabling that is all-too-common with datacom and telecom equipment. Don't work around the rack... get a rack that works around you!

• Includes one locking solid door
• Locking side panels
• 150 lb. weight capacity
• One set of cage nut style mounting rails
• 90 degree swing-out
• Mounting depth: 22.5"
• 19" EIA compliant
• Made in the USA
• 5-Year Limited Warranty