Transceivers

10G SFP+ Transceiver SM, 20Km

Cleerline™ SSF-SFP-SM10G is a high-performance 10G SFP+ transceiver designed for long-range data transmission over single-mode fibers. Operating at a wavelength of 1310nm, this transceiver supports distances up to 20 kilometers, making it ideal for applications requiring extended reach. The SSF-SFP-SM10G is compliant with the 10GBASE-LR standard and features a line rate of 10.3125Gbps, ensuring reliable and efficient data communication.

This SFP+ transceiver utilizes a 1310nm DFB transmitter and PIN photodetector, providing low power consumption and superior EMI performance with its all-metal housing. It is hot-pluggable, allowing for easy installation and maintenance. The module supports advanced digital diagnostics, enabling real-time monitoring of received optical power, laser bias current, and optical output power. The electrical interface is compliant with SFI specifications, ensuring compatibility with a wide range of networking equipment.

The SSF-SFP-SM10G is ideal for various applications, including 10GBASE-LR at 10.3125Gbps and 10GBASE-LW at 9.953Gbps. It is suitable for long-range data communication in enterprise networks, data centers, and high-speed storage area networks (SANs). The transceiver's robust design and compliance with industry standards make it a cost-effective solution for enhancing network infrastructure and supporting high-density port configurations.

10GBASE-SR SFP+ Module MMF Cisco Compatible

The GigaTech Products SFP-10G-SR-GT is programmed to be fully compatible and functional with all intended CISCO switching devices. This SFP module is based on the 10G Ethernet IEEE 802.3ae standard and is designed to be compliant with the SFF-8431 SFP Multi-source Agreement (MSA). This module is designed for multimode fiber and operates at a nominal wavelength of 850nm.

Applications:

• 10GBASE-SR/SW Ethernet

Cisco Compatible 10GBASE-SR Mini-GBIC Rev3

The Cisco compatible SFP-10G-SR-OEM modules offer customers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications. The 10GBASE-SR Module supports a link length of 26m on standard Fiber Distributed Data Interface (FDDI)-grade multimode fiber (MMF). Using 2000MHz*km MMF (OM3), up to 300m link lengths are possible. Using 4700MHz*km MMF (OM4), up to 400m link lengths are possible.

1G SFP Transceiver RJ45, 100m

The SSF-SFP-UMRJ451G is a high-performance, cost-effective Copper Small Form-Factor Pluggable (SFP) transceiver designed for Gigabit Ethernet applications. Fully compliant with IEEE 802.3-2002 and IEEE 802.3ab (1000BASE-T) standards, this module enables seamless 1000 Mbps full-duplex data transmission over distances of up to 100 meters.

1.25G SFP Transceiver SM BiDi T:1550/R:1310nm, 20Km Max Reach, w/DDM

Bi-directional (BiDi) SFP transceivers are high performance, cost effective modules supporting dual data-rates of 1.25Gbps/1.0625Gbps and 20km transmission distance with SMF. These SFPs use Wavelength Division (WDM) technology, mixing two wavelengths simultaneously. 

This SFP module accepts 1 LC connector and must be used as a pair: SSF-SFP-SM1GBDA matched with SSF-SFP-SM1GBDB. 

The SSF-SFP-SM1GBDA consists of three sections: a FP laser transmitter, a PIN photodiode integrated with a transimpedance preamplifier (TIA) and MCU control unit. 

The SSF-SFP-SM1GBDB transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. 

The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further information, please refer to SFP MSA. 

Cisco Compatible GE SFP LC Connector LX/LH Transceiver

The Cisco compatible GLC-LH-SM-OEM modules offer customers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications. The Cisco compatible GLC-T-OEM 1000BASE-T SFP operates on standard Category 5 unshielded twisted-pair copper cabling of link lengths up to 100 m (328 ft). The compatible 1000BASE-T SFP modules support 10/100/1000 auto negotiation and Auto MDI/MDIX.