Techlogix Networx Fiber-based Media Converter - SFP to SFP
Techlogix Networx Fiber-based SFP to SFP Media Converter
TechLogix media converters adapt fiber signals to a variety of different formats and/or cable types.
The TL-MC-1S1S features two SFP ports (SFP module sold separately), effectively adapting signals between different fiber types. In most applications, the TL-MC-1S1S adapts single mode fiber to multimode fiber and vice versa.
The MC-1S1S supports multimode fiber when paired with a multimode SFP module and single mode fiber when paired with a single mode SFP module.
Evolution HDMI Extender 4K 70m w/ Loop Out, Digital Optical Breakout, Bi-Directional IR, PoC
HDMI Extender 4K 70m
The Evolution by Vanco EVEX4K70 HDMI Extender over single Cat6 with Digital Audio Breakout, HDMI Loop-out, IR, and PoE, extends 4K@60Hz, 4:4:4 Chroma, and HDR10 up to 230ft/70m. Vanco’s patented bi-directional Power over Ethernet (PoE) Technology transmits power over Cat6, allowing either the Transmitter or Receiver to be powered without the use of a power supply for an easy installation. The transmitter is equipped with an HDMI loop-out for local monitoring or use with other distribution products. The receiver features digital optical output to break multi-channel audio out to amplifiers for a better listening experience. No EDID or EQ adjustments are necessary as the units automatically adjust for compatibility and gain. In addition, bi-directional IR pass-through allows for source and/or display control. For extending full 4K resolution with up to 60Hz, 4:4:4 chroma subsampling, and HDR10, with options for connecting additional displays and breaking out audio, the EVEX4K70 is a great plug and play solution for connecting the latest components!
The EVEX4K70 includes two units: transmitting unit (EVEX4K70-TX) and receiving unit (EVEX4K70-RX). The transmitting unit is used to capture the HDMI input with IR signals and carries the signals over a single Cat6 cable. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR signals.
*NOTE – All specifications and ratings for the EVEX4K70 have been tested and confirmed using Cat6 cabling. Cat6 or better is strongly recommended for optimum performance, achieve rated distance, and to maximize resolution capabilities of this product. Cat5e is not recommended and may not achieve distance and/or resolution expectations.
BZBGEAR 4K 18Gbps HDMI Extender with Bi-directional IR and Zero Latency up to 70m
The BG-EXH-70C 4K HDMI extender can transmit an uncompressed 4K@60Hz HDMI signal with zero latency at distances up to 70 meters. By utilizing a Cat6/6A/7 network cable this extender allows a signal to be transmitted farther than is possible using standard HDMI cables. Digital audio extraction for an external audio system can be done via the S/PDIF port and supports LPCM, DTS-HD, DTS-Audio, Dolby Digital, and Dolby TrueHD audio formats. The HDMI loop-out allows for an additional display on the transmitter side. Plug and play setup, bi-directional IR pass-through, and surge protection ensure easy setup, flexibility, and reliability.
HDMI 330Ft (100m) Wireless Extender 1080p
The Wireless HDMI™ Extender lets you extend HDMI audio/video signal up to 100 meters (328 feet) via 5GHz band, with very low latency. The Wireless HDMI Extender includes both the Transmitter and Receiver, ideal for the point to point digital signal extension situations that require high quality HDMI™ video and some place which have the limitation to physical wire connection. It supports up to 4 displays to show one source content synchronously and resolutions up to 1080p. It also allows user to control source device from display side via source device’s remote controller.
NOTE: This product is intended to be used in an open area (same room). Signal strength is not guaranteed through walls.
Intellinet Ultra Long Range Outdoor Fast Ethernet PoE+ Extender Kit, 561952
Ultra Long Range Outdoor Fast Ethernet PoE+ Extender Kit
Extends PoE up to 1000 m (3280 ft.), One PD Port up to 95 W, IEEE 802.3bt (4PPoE) Compatible, IP67 Waterproof and Dustproof, Set of Two Modules, Plastic, Gray
Ultra Long Distance Power over Ethernet Extension / Repeater / Amplifier for a PoE range up to 1,000 m (3,280 ft.) - even in harsh outdoor conditions
The Intellinet Network Solutions Ultra Long Range Outdoor Fast Ethernet PoE+ Extender Kit adds up to 1,000 m (3,280 ft.) to the connection distance from a PoE source to an output device via Cat5e or Cat6 cable. It has an output power rating up to 30 watts, which is enough for many power-hungry PoE devices. Its high range and weatherproof housing is especially useful for outdoor IP surveillance camera deployments. This PoE repeater delivers up to 30 W at 100 Mbps over 300 m (984 ft.) or up to 15.4 W at 10 Mbps over 800 m (2625 ft.).
Designed for Outdoor Use
This PoE+ extender offers the right power and data connector for longer-distance applications and suits a wide variety of environments. Its weatherproof IP67 (waterproof and dustproof) rating and a wide operating temperature range of -10 - 55°C (14 - 131°F) make it able to withstand harsh outdoor conditions.
Power over Ethernet 802.3bt-compliant Input, 802.3at/af-compliant Output
Supporting the IEEE 802.3bt protocol with input power up to 95 W, this PoE+ Extender Kit provides up to 30 watts to a connected 802.3at-compliant device or 15 W to an 802.3af-compliant device, along with data up to Fast Ethernet speeds.
Reduced Wiring Costs
This PoE+ Extender helps avoid the expense of running AC power lines to a wireless access point, network camera or IP phone. Simply connect the extender to the LAN switch port through existing Cat5e/6/6a cables to deliver DC power as well as transfer data.
Safe Protection for your Expensive Network Equipment
The auto-sensing technology of this high-power PoE extender ensures that your products are protected from power problems like short circuits (short GND), current overloads and high voltages.
Simple Installation with Cascading Power
This PoE Extender was designed to be as easy as possible to set up and use. All it takes to have it up and running is to connect its PoE In port to your PoE injector or PoE switch and to connect the PoE Out port to the PoE device you want to connect (e.g., a VoIP phone or a PoE network camera). The kit includes two modules that always need to be used together for maximum distance capabilities.
PureLink ECOH Plus Collaboration Hub
No Wire, Less HassleThe ECOH Plus Collaboration Hub allows users to wirelessly extend a PC/Mac or HDMI source via the ECOH Plus Linkconnector to a single display for easy connectivity and screen-sharing. The ECOH Plus supports up to eight connections and a single user on screen. Together with its plug and play design, the ECOH Plus offers effortless setup and operation (no app or software) for a convenient, no hassle meeting room solution.
The ECOHPLUS-KIT1-1 includes the ECOH Plus Base Station and (1) pre-paired ECOH Plus-Link connector.
BZBGEAR 4-Port USB 2.0 Extender over Single Cat.X Cable up to 260FT
The BG-USB-MR80 USB 2.0 Extender over Single Cat.X allows USB devices to be extended at distances up to 80 meters (264 feet). This unit consists of two devices - transmitter and receiver.
The transmitter is located at the computer while the receiver connects to peripheral devices such as printers, cameras, storage devices, and more. The receiver features a 4-port USB hub to allow connection for multiple devices. When you need a reliable, long-range solution for USB 2.0 connectivity look no further!
BZBGEAR 4K 18Gbps HDMI Extender with Bi-directional IR over a Single Cat5e/6 up to 165ft
BG-EXH-50C provides 4K@60Hz (4:4:4) with HDR support extending your HDMI signal streaming at 18Gbps utilizing HDMI 2.0 ports along with HDCP 2.2. The Signal transmission can reach up to 165ft/50 meters via CAT5e/6 without any loss or degradation of video or audio quality.
The extender feature single direction IR and separation which considers source control and one HDMI circle yield. The unit also offers a convenient HDMI Loop out for a local display, HDMI Splitter or Switcher.
With so many valuable features, this HDMI Extender is a perfect choice for a variety of applications requiring signal extensions up to 165ft of distance as well the capability of powering either the Transmitter or Receiver for power over CAT5e/6.
Zigen HDBaseT Receiver over Single Cat5e/6/7 up to 100m for use with HX-88 and HX-1616 HDBaseT Modular Matrixes
Using HDBaseT technology, the ZIG-HVX-100R from ZIGEN extends an HDMI signal up to 100 meters using a single Ethernet cable. It also transmits bidirectional control signals for ultimate convenience. It can be used as a stand alone solution or combined with matrix switch setups to extend the input or output cable distance.
This HDMI extender supports resolutions up to 1080p and 4Kx2K Ultra HD. It supports simultaneous transmission of RS-232 and IR signals from a control system, enabling remote control of source devices or displays.